Subpanel doesn't work in Runtime application

I created an application that uses a Subpanel. The Subpanel works correctly when I am running the code in LabVIEW, but nothing shows up when I use the runtime application. Are subpanels handled differently by the runtime engine than they are in the Full Development System?

It turns out that the problem was that I was using controls with type definitions. The type definitions weren't available to the runtime application and thus the VI that I was trying to run in a Subpanel couldn't be opened. One solution is to disconnect all of the type definitions. The other solution may be to place the type definitions in a folder at the same level as the SubVI so that the runtime application can find them.

Similar Messages

Portal Search doesn't work in Portal Applications forum.

Portal Search doesn't work in Portal Applications forum.

Hi,
Can you mention what exactly is not working?
Thanks,
Vanathi

Since 2.2.1 upgrade, force quit doesn't work after an application freezes

Sorry if this was posted before, but I couldn't find a post that matched my issue.
Has anyone else noticed that since upgrading to 2.2.1 on the 3G, if an application freezes, force quit doesn't work. I have to do a hard reset inorder to get the OS to respond again. Even tried to just hold the power button to do a power off and it doesn't respond.
Any advice? Tried restoring to 2.2.1 many times didn't help.

Thanks for the response. I have done a many restores as "new iphone" and reinstalled apps. I normally get freezes when I'm in a twitter type application and using the "mini/lite safari browser" within the twitter app.
When the phone doesn't freeze, I can force quit apps at will. It's only after a freeze (when I need force quit the most) does it not work....
I would make a Genius Bar appointment but I can't recreate it at will.

Restore mysql doesn't work with Runtime?

hi all
iam trying to restore a backup of mysql database,i took the backup using mysqldump.
iam using a correct syntax of restoring and i already tested it in the command line and it worked correctly
mysql -u root new_db < f:\backup.sql
the problem is when i try to use the same command with Runtime it doesn't work
here's my code:
try{ String command="c:\\wamp\\mysql\\bin\\mysql -u root new_db < f:\\backup.sql"; Runtime.getRuntime().exec(command); }catch(Exception e){e.printStackTrace();}
and i already read the recommended article
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html?page=1
but i don't know if there's something missing in my code
hope to find help
thanks in advance

i implemented the backup part after modifications and it worked correclty:
         try{
         String path=textfield1.getText().replace('\\','/');
         String file_path=path+"/"+"backup.sql";
         File backupFile = new File(file_path);
         FileWriter fw = new FileWriter(backupFile);
         Runtime runtime = Runtime.getRuntime();
         Process child = runtime.exec("c:/wamp/mysql/bin/mysqldump --user=root --lock-all-tables --opt library");
         InputStreamReader irs = new InputStreamReader(child.getInputStream());
            BufferedReader br = new BufferedReader(irs);
           String line;
            while( (line=br.readLine()) != null ) {
                fw.write(line + "\n");
            fw.close();
            irs.close();
            br.close();
                 }catch(Exception e){e.printStackTrace();}but when i try to implement the restore part as above it doesn't work
could anyone tell me please where's the error?
try{
         String path=textfield2.getText().replace('\\','/');
         String file_path=path+"/"+"backup.sql";
         System.out.println(file_path);
         File backupFile = new File(file_path);
         FileWriter fw = new FileWriter(backupFile);
         Runtime runtime = Runtime.getRuntime();
         String command="c:/wamp/mysql/bin/mysql -u root lib < "+file_path;
         Process child = runtime.exec(command);
         InputStreamReader irs = new InputStreamReader(child.getInputStream());
            BufferedReader br = new BufferedReader(irs);
           String line;
            while( (line=br.readLine()) != null ) {
                fw.write(line + "\n");
            fw.close();
            irs.close();
            br.close();
                }catch(Exception e){e.printStackTrace();}

Installer doesn't work for any application

The installer app itself is not working on my mac (Macbook Pro, running Version 10.8.5), and it doesn't work regardless of the software that I'm trying to install.
I get the following error message:
Installer cannot be opened because of a problem.
Check with the developer to make sure Installer works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Any help/suggestions?
MacBook Pro, OS X Mountain Lion (10.8.5)

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Scrolling doesn't work on some applications

I'm using the program Notepadd++ and I can't use the touchpad to scroll. I've connected a USB mouse, and scrolling works fine with that device. I've tried reinstalling the drivers, etc, and it still has the same problem. Scrolling also doesn't work when watching flash videos on Firefox. Once again, scrolling works just fine when using a USB mouse.
Product name: HP Pavilion g6 Notebook PC
Product number: B5R80UA#ABA
This question was solved.
View Solution.

ih23,
After doing a little research, it seems like it is the programs are conflicting with the driver and you are not the only one to experience this.
Here is what I found to fix the issue in Notepad++. Note that it requires editing registry, so depending on how comfortable you are with that or not, it is up to you if you want to try this fix or not. I would always recommend backing up the registry before changing anything.
"It seems that whatever the Synaptics driver is doing to render the scrolling cursor is confusing Notepad++.
If you go to HKLM\Software\Synaptics\SynTPEnh and add a new DWORD named UseScrollCursor with a value of 0, the scroll cursor won't appear and vertical scrolling will work in Notepad++."
Best of luck!
-Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

FullScreen doesn't work in local application

Hello world,
I developed an application in Qt4.5 which is simply a very simple browser. It display HTML pages and so on.
In this pages, I have a flv object. This one is displaying well and I allowFullScreen. When I click on the fullscreen button, video goes on fullscreen but the pb is that sound continue, but the video freeze (if I leave the fullScreen mode, I'm in the right spot in the video playback)
If I launch the html file in Safari Browser, FullScreen works.
Thx in advance for any help

Nobody knows or has an idea about this strange issue?

Visa doesn't work in runtime environement, but does in development?

I have a vi that utilizes visa for accessing a comport associated with a serial port.
The vi works just fine in the development environment, but after I compile it, the vi's no longer can access the com ports.
any special trick necessary during the compile to ensure that the visa still works?
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Solved!
Go to Solution.

Problem solved, the runtime environment requires visa runtime drivers. The developement environment requires different visa drivers.
My visa runtime environment drivers were out of date.
http://www.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:du,n8:3.25.123.1640,ssna...
here are the visa driver updates for both environements
Happy hunting!
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay

Undo/redo menu doesn't work on runtime

I am using a custom real-time menu. I have included the application
functions of Undo and Redo as well as copy/cut/paste. The menu works
fine when I run the vi in development mode; but when I build an exe
using the application builder, undo and redo do not appear on the menu
bar. The other menu items are there and work as expected.
Does anyone know how to get around this problem? Any help is
appreciated.
muren

I have the exact same problem. I am using LabVIEW 8.2, when I am in development mode the Undo/Redo work fine, if I build an executable the Undo/Redo options do not show. In the executable if I type ctrl+z, the control gets populated with zzz.
I am not even doing a fancy menu. I am using the "minimal" menu option.
I am attaching a sample vi and the exe I did to show the problem.
I hope someone can help and I don't have to wait 9 years. The previous post is from 2000!!!
Thanks
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
temp-menu-test.vi ‏14 KB
Menu-test.zip ‏26 KB

Keyboard doesn't work with Emulator applications, Nestopia, bsnes, etc.

I have a PowerPC G5 with a usb keyboard that was shipped with the computer. The keyboard works fine with everything else except various nintendo game emulators. I have researched the problem and no one seems to have the same issue. The only keys that work are the function keys that affect dashboard and spaces. I have tried adjusting the configurations and have also tried using a different keyboard... still nothing. It must be something on the operating system's side.
Is there some kind of block as to why these particular applications are not responding to my keyboard?
Any advice would be helpful

HI boombadabum,
I understand that you are having issues with keyboard shortcuts with a custom keyboard layout.
I also understand that when you press the shortcuts that the menu blinks like it is working, but nothing actually happens.
As a work around, you may be able to map them out with this add on[https://addons.mozilla.org/en-us/firefox/addon/customizable-shortcuts/]

Serial port doesn't work in installed application

I have a simple vi that reads serial data coming from a device, using the VISA Configure Serial Port vi. The development vi and the executable (.exe) versions work fine on my laptop, but when I install it on another computer, the serial port sees no data and there is no error message. All com port settings are the same between the Configure vi and both computers. I built a stand-alone application then built an installer, then installed it in the second computer and ran the setup.exe. The vi opens and works in every respect except for the serial port. What am I doing wrong?

Is the COM port you have selected correct? Are the error clusters in your application all connected so an error will be reported if it occurs?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

@Startup doesn't work in Enterprise application

Hi,
I've done a simple web application. Here when use the @Startup annotation the method @PostConstruct is called every time i start my application.
When I do the same with an Enterprise application the @PostConstruct method of my ejb is never called.
I'm using Glasfish 4 and Java 7
Thank you!
Fabio

Nobody knows or has an idea about this strange issue?

Paste (Kb shortcut or menu) doesn't work in any application

So, I cannot paste any form of text into any document, box, etc. using either the keyboard shortcut or the finder menu. All keys work on the keyboard, OS X just makes the default error noise (Funk) when I try it. Any ideas? Thanks

See if a reboot helps.

Now my MS Office doesn't work because powerpc applications are not supported by Lion. what now?

Does this mean that I have to purchase a new version of MS Office that is supported by Mac chipset? Wish I'd known that before purchasing Lion. Is there a way to work around this?

There are already plenty of threads on this subject. Just search PowerPC or Rosetta and Lion.
Yes, you have to upgrade the nearly decade-old software.
No, there isn't a workaround, although there are alternatives to Office.

After updating iTunes 10.5 and iPhone 4 iOS 5 my phone doesn't work at all. It freezes while it is trying to do the Restore phone. That means I have not have a functional phone for two days now. Same thing happens with my iPad 2.

I updated Itunes to v 10.5. Mistake!!!! Then updated iOS 5 to my iPhone 4 now my iPhone doesn't work as the applications freezes when trying to restore the phone. Same thing happens with my iPad 2, so now I have two pieces of equipment that are completely non-functional. Can any please tell me what to do? How can I reinstall the previous versions of iTunes, or iOS which were working on my iPhone and on my iPad? I hate iTunes and this has been the last drop that messed up my equipment. Please help me. I do not have another phone to call APPLE. This ***** big time!! PLEASE HELP ME!!!

Connect to a computer to restore.

Subpanel doesn't work in Runtime application

Similar Messages

Maybe you are looking for