Subscription not visible-usable

I bought 2.7. 15 Croatia Unlimited mins to landlines 1 month.I was billed with Visa 6.14 eur.After 3 days I still can not use that subscription ...The e-mail I received notice:It's now ready for you to use. If you have any problems, visit our support section on skype.com,date,order number,amount,status is delivered I dont know what is a problem.

NO...I have only 1 accaunt...I always use 1 skype...first time i bought subscription from my Canada Visa card ..2012....croatian unlimited...then when i back to Croatia ..I bought June 2013 -1 month subscription Canada.
Now i move to Ireland..I bought Croatia Unlimited mins to landlines 1 month( 2015.07.02)with my IRELAND VISA CARD..skype charged my card...but i cant use that subscription.
From July 2 till today on my skype web page sometimes i see that subsrription(2x per day)..
So I CANCEL today.
Your subscription Croatia Unlimited mins to landlines 1 month will terminate at the end of the current billing period, which is on 2015.08.02

Similar Messages

Re: Subscription not visible-usable

mu subcsription not visible why i recharge today

NO...I have only 1 accaunt...I always use 1 skype...first time i bought subscription from my Canada Visa card ..2012....croatian unlimited...then when i back to Croatia ..I bought June 2013 -1 month subscription Canada.
Now i move to Ireland..I bought Croatia Unlimited mins to landlines 1 month( 2015.07.02)with my IRELAND VISA CARD..skype charged my card...but i cant use that subscription.
From July 2 till today on my skype web page sometimes i see that subsrription(2x per day)..
So I CANCEL today.
Your subscription Croatia Unlimited mins to landlines 1 month will terminate at the end of the current billing period, which is on 2015.08.02

Logon groups not visible/usable

Hi,
I'm experiencing problems with using logon groups for load-balancing connections to my NSP 7.01.
Ultimately I want to create a JCo Connection from my CE 7.1.1 to the ABAP system and CE forces me to use a load-balancing connection using a message server and a logon group. But in order to test the proper configuration of my ABAP system, I'm simplifying the scenario but just attempting to log on to the system via Sapgui with load balancing.
Here's my setup:
It's a local scenario where both Sapgui and the AS ABAP reside on the same server.
The system has SID NSP and SysNr 02.
The proper services (sapmsNSP 3602/tcp plus sapdp02, sapgw02) and hosts entries are present on the server.
Everything else works fine
The instance knows itself as tron7661_NSP_02 (I had to correct some errors in the standard installation
Profile file NSP_DVEBMGS02_TRON7661 contains: rdisp/enqname = tron7661_NSP_02, rdisp/myname = tron7661_NSP_02
In transaction SMLG, I created a logon group HUGO, assigning instance tron7661_NSP_02 with attribute "Ext. RFC enabled" = true and everything else left blank.
When I press the "Test" button, I get message "Internal error (SIMULATION:INACTIVE_SERVER)" (Message no. RZ783). I can confirm and save anyway. A green LED is displayed in the "Status" column for my logon group.
After restarting the server, I would expect the new logon group to be usable when creating a new entry in Saplogon.
In Saplogon, I choose "Create new entry", connection type "Group/Server Selection", and enter the host name of my message server TRON7661.
As a result, a single entry "tron7661 (tron7661_NSP_02, DIA UPD ENQ BTC SPO ICM)" appears in the field "Group/Server".
This entry represents not a logon group, but a single application server.
(When I try this for other SAP systems and message servers in my landscape, I always get the logon groups configured for this systems plus an entry for the application server.)
Do you have any idea what might be wrong here?
Thank you and best regards,
Thorsten
P.S.: I have found and reviewed thread /message/208613#208613 [original link is broken] but found nothing helpful in it.

Hi Raja,
Thank you very much! -- Thomas' blog solved my problem. It was in fact just a matter of running the report that makes the configured logon group usable.
Best regards,
Thorsten

Google calendar subscription not visible in iCal

Hi folks, I'm trying to subscribe to a shared Google Calendar through the ICAL (.ics) protocol.
Although iCal seems happy enough with the URL I provided it and shows a calendar under "Subscriptions", none of the shared events is showing up in iCal. I don't mean that event details are not showing up, I mean nothing is showing up, not even free/busy blocks.
I downloaded the .ics file from the URL and viewed it in a text editor, and it appears to contain all the information, with the start/end dates and times, etc. It's just not showing up in iCal's calendar views.
Any clues?

i seem to have the same problem, can you tell me where you set those default settings? in ical ? or google calendar? thanks for help ....

HP 8600 Plus - Printer is on wifi but not visible/usable for any computers on the same network

Hello,
I am on windows 7 x64 and I have an HP 8600 Plus. This printer has been working fine since we bought it but suddently it does not show up on the network. It started when my wife would try to print and the HP software says it cant connect to the printer. I tried resetting everything, including the router. I restored factory settings on the printer as well, still no luck.
I am able to connect the printer to wifi. The indicator shows that it is connected and ready. It has no errors there. It has an IP address and all seems well. I have several other computers on the same wifi network and none of them can SEE the printer. It does not show up in network devices and I am not able to install it using the HP wizard software (it gets stuck looking for the printer, then asks for a manual IP address and it still fails)
Please help, it worked fine for a few months and suddenly it is 100% not working!

Anyone out there ever seen anything like this before? I searched the forums pretty heavily and I see similar issues but none quite like mine.
I have also tried the Print and Scan Doctor. Again, since the software cant find the printer on the network it won't connect and won't resolve any problems. It tells me to make sure the printer has a wifi connection and that the blue light is on and the indicator is showing it is connected, all of which are true.

Youtube subscriptions not visible?

I've read that an update a while back (like over a year ago) was supposed to address this but I still can't see any subscriptions I've added in the past several months. Apple TV says it's fully up to date.
I've tried restarting, signing in and out of YouTube, no luck.

I figured out what was wrong. I had to chose the option where I only recurve updates from subscription only when they upload videos rather than the option that gives updates of videos that my subscriptions rated, commented etc. So if anyone else has this problem check your subscription settings on YouTube online.

New version of app with subscription and newsstand support not visible in App Store

This might be more question aimed on Apple Support, but maybe someone had similar experience. Today at morning i've released new version of App for customer. This version have two main news - support for newsstand and subscription. Old version disappeared from App Store, but new one is not visible on any market. i'm quite confused, anyone have idea what happened?

Hi, Steven and Martin
I have this porblem now. My app is out from app store, because I delete the subscription in my app with newsstabd enable.
I'm a little confused, because I submit a new subscription - with a new product ID - because I can't reuse the first.
Apple don´t allow me update a new app without newsstand. Until now I hadn´t answer from apple about the new subscription and my app continuous nor visible in app store, but the status is "ready to sale".
At least, Apple should me send a message about this issue.
All the problem started because I set the tier price to subscription the same value to retail price (tier 3), then when I changed the tier price to amount the period subscription - 6 months (tier 90). This price (tier 90) was set to the retail folios too, so my magazine turned the most expensive in App Store!!!
Please, I'd like and I need to understand better how set differents prices to retail and subscription, because something happened wrong in my first try

"podcasts" is not visible in iTunes after software update

iTunes no longer shows "podcasts" as a category. I have several active subscriptions--they seem to have disappeared. All of the other usual categories (e.g., music, TV shows) are still there. This occurred immediately after I downloaded today's iTunes upgrade. I have tried downloading more podcasts. That happens fine--but they are not visible from iTunes after the download.

I can re-check the "podcasts" box in the Windows version. It's not grayed out. But there doesn't seem to be any way to save my changes. Didn't the "preferences" dialog box used to have a "save changes" button at the bottom?

System DSN not visible to 'domain users', why??

We have a Windows Server 2012 R2 Remote Desktop Services RDS farm.
I set up a 32-bit *system* DSN properly with the 32-bit ODBC app for Crystal Reports 2011, a 32-bit app.
When a domain user opens CR the newly created DSN does not appear in CR, though it appears for an admin user.
Why is the system DSN not visible to the domain users per se??
I checked the proper registry item and gave 'Domain Users' read permission to it, still no work.
Certain users need to see the DSN so they can configure the report to talk to the proper server, database, etc.
System DSNs are supposed to be visible/usable to all users.
What should I do??
Thank you, Tom

FWIW some other DSNs are visible to CR2011 but nothing we can use, they were somehow automagically created during installation of other software stuff.
I've tried every way I can think of to install the DSNs (different providers, different accounts) but I still can not get the desired DSN visible to my domain user login after opening a Crystal Reports 2011 report and clicking 'change database location'...
I thought about and tried using a DSN-less connection string but that did not go very far...it would be usable, people could type in ID and password if they must, but I could not get it to even let that happen...I also did not quite know what the string
should be, the database itself is SQL Server 2012 (11.0), I don't know the exact version OTOH.
The Remote Desktop Services Hosts are all Windows 2012 R2...could that be the cause of the problem?? Every other server I've put system DSNs was 2003 or 2008...
Thank you, Tom

Podcasts episodes not visible and not updated

Since 2 weeks I have noticed that in iTunes for Windows new postcasts episodes are no longer visible in the Postcast section. The result is that as no updates are shown (also not after using the refresh option) the new episodes are not downloaded either.
The strange thing is that when I look in the iTunes Store or create a Smart playlist with Grouping set to Podcast the episodes are visible.
Any suggestions why the episodes are not visible and not updated?
Thanks.

Does this fit your situation? iTunes will stop updating a podcast subscription if you have more than five episodes downloaded but not listened to, as detailed in this page:
http://support.apple.com/kb/TA23353
which states:
You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update.

SRGB_v4_ICC_preference.icc not visible

Want to experiment with sRGB_v4_ICC_preference.icc. On a Mac. Profile in the standard diretories. But not visible in LR-export (other...) module
Someone a clue?

camerahans wrote:
Someone a clue?
Yep...the " sRGB_v4_ICC_preference.icc" profile has a couple of wrong tags in the header that keep that profile from loading in Lightroom. The profile needs a display class header...there is a modified profile floating around called "sRGB_ICC_v4_appearance_beta_displayclass.icc" that offers LR usability. See if you can find it. I have it but got it from a friend–not sure where he got it.

Subscribed Calendars not visible

Just in the tedious upgrade process from 10.6 (the last real Desktop-Office OS) to the iPhone Clone OS called Yosemite...
I copied all calendars over from my old 10.6 Mac and put them directly in the ./Preferences/Calendar folder. This was fine with all local calendars but not for subscription. They simply do not show in the left column. Trying to simply re-create with the proper URL gives me a message:
"this calendar still exists" (but why can't I see it then?)
Looking at the ./Preferences/Calendar folder I can even see there new entries coming in from the subcriptions. So the calendars are there, working but not visible in the Calendar app...??

Yep, thats what I tried but then the error message above appears....
The solution for me was to delete the Calendar-Cache files. After that the old subscription were finally forgotten..

N97 GPS WORKING BUT MAPS NOT VISIBLE- - ADVICE PL...

Hi All
A few months ago I upgraded my N97 SW.
Im now on the following –
Software Version -V21.0.045
Custom version – 21.0.045.C01.01
Date 14-01-10
Model N97
Type RM-505
Language Set 15
A few weeks after this I started my maps (UAE) and although the GPS was working the maps were not visible.
If I start maps and goto options-->Shop --> My licenses
Its says that “Drive all regions” expired on 23/01/2010
I thought it was my SW upgrade that screwed up the maps but it looks like it’s the subscription.
Can someone confirm that this is the reason that my MAPS are not visible and what myoptions are for purchasing so that I can see where Im going?
Advice and help much appreciated.
Jimmy
PS it was purchased from Sharif DJ

Since you are already on v21, go to Menu>Apps>Software Update>And download the new Ovi maps 3.03 (free lifetime navigation).
After wards connect your phone to your PC via Ovi Suite and download the updated maps for your phone. These maps are updated every now and then (addition of more roads,new data, etc). Also updating the maps may render old maps incompatible with new app.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Appointments with option Working Elsewhere not visible in Scheduling Assistant

I have a problem with appointments that have the Show As option as "Working Elsewhere". When someone tries to use the scheduling assistant and selects someone who has an appointment set to "Working Elsewhere" the appointment is
not visible at all in Scheduling Assistant. If the person changes the appointment to Busy or Out of Office is becomes visible again to the person using Scheduling Assistant. Outlook 2013 and Exchange Server 2010 with the latest updates installed are being
used in our Environment. Is this type of behaviour by design or is it something else like using Exchange 2010 that doesn't support it fully?

Hi,
Based on my research and test, the WorkingElsewhere field is applicable for clients that target Exchange Online and versions of Exchange starting with Exchange Server 2013.
Between outlook 2013 clients and mailbox being on Exchange 2010, the meeting invite would show as "Working Elsewhere" for each of the attendees in their respective calendars but does not show any information regarding other attendee who accepted
the meeting request.
Thus, the Working Elsewhere field is visible in attendees’ Schedule Assistant with outlook 2013 and mailbox on Exchange 2013. Here is an article talked about it:
http://technet.microsoft.com/en-us/subscriptions/microsoft.exchange.webservices.data.legacyfreebusystatus
http://msdn.microsoft.com/en-us/library/microsoft.exchange.webservices.data.legacyfreebusystatus(v=exchg.80).aspx
Regards,
Winnie Liang
TechNet Community Support

External hard drive not visible in disk utility or finder

Hi all,
I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
Any help is appreciated
Thanks,
Bruce

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

Subscription not visible-usable

Similar Messages

Maybe you are looking for