Substance from DG Handling for SVT
Hello EH&S Experts,
I would like to know if I´m right, so following situation:
We have implemented the EH&S Submodule Dangerous Goods Management, we don´t have a data provider for the substances.
Our current configuration is that we have the substances for as Spec. Type LS_UN_SUB. For each substance we have created a classification DG_CL_SUB where the materials are linked.
Now, we create the DG Master Records with the transaction DGE5. So everything is good.
Now I get a further requirement, to check if it is possible to implement the Substance Volume Tracking (SVT) in EH&S.
So, my question now is: is it possible to use the existing substances (LS_UN_SUB) for the SVT?
Or do I have to create new substances?
The main problem is that we don´t have a data provider and we create everything manually.
Thank you in advance and best regards.
Thomas
Hello Thomas
you can not use LS_UN_SUB specifications whcih you have generated to handle DG topics to handle the SVT topic. Normally you will use either the PURE_SUb or the LIST_SUBs in SVT.
PLease refer to data model on online help or SAP Note 905726 regarding SVT.
With best regards
C.B.
There is a chapter "Substance Volume Tracking " in online help of SAP. Here you will find basic information regarding this.
Keep in mind: based on you rSAP release you have further options in SVT. With Enhancement PAckage 5 new functionaliyt is available in this area
Edited by: Christoph Bergemann on Feb 28, 2010 12:44 PM
Similar Messages
-
SAP table for finding Quant from the Handling unit
Hi All,
I would like to know the SAP table name - from the handling unit (where the stock received in the Warehouse), i would like to corresponding Quant ?
PSSHi,
To know the QUANT for handling unit, use the table LQUA. -
Error in creating IO file handles for job (number 3152513)
Hi All -
I am using Tidal 5.3.1.307. And the Windows agent that is running these jobs is at 3.0.2.05.
Basically the error in the subject was received when starting a particular job once it was cancelled and a couple of other different jobs a few days before. These jobs have run successfully in the past.
This particular job was running for 500+ minutes when it should run at an estimated 40 minutes. At that time it would not allow for a re-start of the job, it just stayed in a launched status.
Trying to figure out what causes this error.
Error in creating IO file handles for job 3152513
Note - from that being said we were to see 2 instances of this process running at the same time, we noticed some blocking on the DB side of things.
Trying to figure out if this is a known tidal issue or a coding issue or both.
Another side note, after cancelling the 2nd rerun attempt the following error was encountered: Error activating job, Duplicate.
When we did receive the Error creating IO file, the job did actually restart, but Tidal actually lost hooks into it and the query was still running as an orphan on the db server.
Thanks All!The server to reboot is the agent server. You can try stopping the agent and then manually deleting the file. That may work. When the agent is running the agent process may keep the file locked, so rebooting may not be sufficient.
The numerical folders are found as sub-directories off of the services directory I mentioned. I think the numbers correspond to the job type, so one number corresponds to standard jobs, another to FTP jobs. I'd just look in the numbered directories until you find a filename matching the job number.
The extensions don't really matter since you will want to delete all files that match your job number. There should only be one or two files that you need to delete and they should all be in the same numbered sub-directory.
As to the root cause of the problem, I can't really say since it doesn't happen very often. My recollection is that it is either caused by a job blowing up spectacularly (e.g. a memory leak in the program being launched by Tidal) or someone doing something atypical with the client. -
Exception handling for all the insert statements in the proc
CREATE PROCEDURE TEST (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
if @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE [MONTH] BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND [YEAR] BETWEEN year(@StartDate) and year(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1
A,B,C
SELECT
A,BC
FROM XYZ
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT>0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
END--End of Main Begin
I have the above proc inserting data based on parameters where in @InsertCase is used for case wise execution.
I have written the whole proc with exception handling using try catch block.
I have just added one insert statement here for 1 case now I need to add further insert cases
INSERT INTO TAB4
A,B,C
SELECT
A,BC
FROM XYZ
INSERT INTO TAB3
A,B,C
SELECT
A,BC
FROM XYZ
INSERT INTO TAB2
A,B,C
SELECT
A,BC
FROM XYZ
I will be using following to insert further insert statements
if @InsertCase =1
I just needed to know where will be my next insert statement should be fitting int his code so that i cover exception handling for all the code
MudassarHi Erland & Mudassar, I have attempted to recreate Mudassar's original problem..here is my TABLE script;
USE [MSDNTSQL]
GO
/****** Object: Table [dbo].[TAB1] Script Date: 2/5/2014 7:47:48 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[TAB1](
[COL1] [nvarchar](1) NULL,
[COL2] [nvarchar](1) NULL,
[COL3] [nvarchar](1) NULL,
[START_MONTH] [int] NULL,
[END_MONTH] [int] NULL,
[START_YEAR] [int] NULL,
[END_YEAR] [int] NULL
) ON [PRIMARY]
GO
Then here is a CREATE script for the SPROC..;
USE [MSDNTSQL]
GO
/****** Object: StoredProcedure [dbo].[TryCatchTransactions1] Script Date: 2/5/2014 7:51:33 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[TryCatchTransactions1] (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
IF @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE START_MONTH BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND START_YEAR BETWEEN year(@StartDate) and YEAR(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1 (COL1,COL2,COL3)
VALUES ('Z','X','Y')
SELECT COL1, COL2, COL3
FROM TAB1
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT > 0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
PRINT @SUCCESSMESSAGE
END--End of Main Begin
GO
I am just trying to help --danny rosales
UML, then code -
Dear All,
When I trigger my workflow from SWUE,the workflow containers must be populated with agent name.But it is populated only with 'US'.Please suggest.
On the other hand, when I trigger my workflow from ME21N,the workflow goes into error.The error statement is "Exception occurred - Error handling for work item 000000954797".What is the problem?
Please suggest the solution for which I will be grateful.
Thanks and regards,
S.SureshDear ,
I use bus2012 as BOR and event as created.
When I create purchase order from ME21N,bus2012 is not triggering.Instead FREBUS2012 gets triggered which is a subtype of bus2012.
At SWETYPV,event linkage is activated only for BUS2012 and there is no entry at SWETYPV for FREBUS2012.
Though I configured the workflow with start events:BUS2012->created,why FREBUS2012 should trigger my workflow which is not seen in SWETYPV?How to override it?Please suggest.
There is no start conditions for my workflow.Whenever purchase order is created,this workflow should trigger.
So,the parameters passed between even to workflow are
&_EVT_OBJECT& -> &BUS2012&
&_EVT_CREATOR& -> & WFINITIATOR&
Thanks and regards,
S.Suresh -
HTTP handler for starting an external service cannot be read
Hi,
When i execute the work item from Business Work place and also from the UWL in Enterprise portal of the task TS21300098 for HR Process Requisition workflow.
In the Error is says
HTTP handler for starting an external service cannot be read
Message no. SWK045
Diagnosis
This work item is a link to a HTTP service. To start the service, a launch handler must be known to the SAP System.
However, the system could not find a launch handler.
System Response
The workflow system cannot start execution of the work item.
Procedure
Contact your workflow administrator:
In Customizing you must maintain a launch handler for HTTP-supported dialog services.
I have checked the config under WF_HANDCUST transaction and made the launch Handler settings generated automatically.
But still the problem occurs.
Any Suggesions and help?
Thanks & Regards
Sumanthhi Guys,
I have got the same issue. This blog helped me with tcode WF_HANDCUST. I have generated the url
http://waspgh.kcc.com:8083/sap/bc/webflow/wshandler-->Click on Generate URL and click on distribution.
Immediately u will get click on Test url . Click Test url . Then It is not successful. It stopped at
http://waspgh.kcc.com:8083/sap/bc/webflow
Getting http page error. So use tcode sicf >sap>bc-->webflow service and activate it.
Then test the connection. It will be successfull.
http://waspgh.kcc.com:8083/sap/bc/webflow/wshandler?ping=true&sap-client=400
Handler test
Test successful
Thanks,
Shankar -
Unable to get Window Handle for the 'AxCrystalActivXViewer' control.
Hi,
I have Operating System : Windows 7 and Application developed in VS 2005 and I am using Crystal Report XI licenced version.
But when I am trying to use TTX(Field Defination) based reports it gives me "Unable to get Window Handle for the 'AxCrystalActivXViewer' control. Windowless ActivX Controls are not supported."
Please provide me solution for this ASAP as I am stucked on this from long lomg time.
-Regards
SwapnilAppears you are installing an upgrade version.
Use these links:
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE -
EmailRecieved Event handler for incoming email in Sharepoint 2013
Hi,
I am developing custom event handler to enable incoming email for custom document library. i have couple of questions.
1. Once i attached the event handler, i could see incoming email settings for the custom document library, but it displays only 2 options as below :
1. Allow this document library to recieve email
Yes No
2. E-mail address
All other properties are not displaying. Is this normal behaviour on custom event handler for custom document library or any issue anywhere?
2. So i have given other properties using powershell as below:
$list = $web.lists["invoice Documents"]
$list.EmailAlias ="TestDocument"
$list.EnableAssignToEmail = $true
$list.rootFolder.Properties["vti_emailusesecurity"] = 1
$list.rootFolder.Properties["vti_emailsaveattachments"] = 1
$list.rootFolder.Properties["vti_emailattachmentfolders"] = "root"
$list.rootFolder.Properties["vti_emailoverwrite"] = 0
$list.rootFolder.Properties["vti_emailsavemeetings"] = 0
$list.rootFolder.Properties["vti_emailsaveoriginal"] = 0
$List.RootFolder.Update();
$list.Update();
here i have given vti_emailusesecurity as 1, so it should allow incoming email for the user who has permission for the list.
But any user from the domain is sending mail to this list, the Emailrecieved event handler is triggered. I am expecting that this event handler should not be triggered and expecting access denied error in the ULS Log. But that is not happening, and emailrecived
is triggered and email is delivering to this address successfully.
Can you please anyone help if experience on this?
Thanks
Sathyahttp://www.coretekservices.com/2012/01/26/sharepoint-content-organizer-%25e2%2580%2593-emailing-your-drop-off-library-and-getting-it-to-work
Central Administration > Monitoring > Review Job Definitions (under Timer Jobs) > Content Organizer Processing
Also check below:
http://tutorial.programming4.us/windows_server/SharePoint-2010---Content-Organizer-as-a-Document-Routing-Tool.aspx
If this helped you resolve your issue, please mark it Answered -
Flow is like :
REST ENDPOINT->OSB PROXYSERVICE->BUSINESS SERVICE->B2B SFTP LOCATION->B2B->SOA JMS Queue->SOA COMPOSITE-
Due to cluster environment, there is issue when B2B picks the file from SFTP location for Custom protocol using sftp listening channel. Sometimes B2B picks multiple files from SFTP location for just one copy of file. It is happening because of cluster environment 4 instances of server is looking into the SFTP location for picking the file and sometime 2 or more instances of server are reading same file and sending the copy to B2B.
Please let me know , how can I stop this behaviorAll QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue. -
How to add event handling for a menu?
hi,
I have created a menu and few mneu items.
for eachmenu itme , i did event handling and it is workign fine.
it was like this
menuItem = new JMenuItem("Exit",KeyEvent.VK_X);
menuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_X, ActionEvent.ALT_MASK));
menuItem.addActionListener(this);
menu.add(menuItem);
public void actionPerformed(ActionEvent e)
JMenuItem source = (JMenuItem)(e.getSource());
String s = "Action event detected. Event source: " + source.getText();
System.out.println(s);
public void itemStateChanged(ItemEvent e)
JMenuItem source = (JMenuItem)(e.getSource());
String s = "Item event detected. Event source: " + source.getText();
System.out.println(s);
now int he second menu i don't have any menu item and i want to do the event handling for the menu itself. any ideas how to do it. following is the code for the menu
//Build the second menu.
menu2 = new JMenu("Options");
menu2.setMnemonic(KeyEvent.VK_O);
menuBar.add(menu2);
menu2.addActionListener(this); //this does nto workYou were on the right track. However, selecting a menu is different from selecting a menu item. MenuItem chucks an ActionEvent and Menu will send an ItemEvent.
If you pile all action output to one actionPerformed method then be careful of your assumptions on what the source type will be. If by any chance the Menu has sent an ActinoEvent then your code will have caused a ClassCastException.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class MenuTest implements ActionListener, ItemListener {
JMenuItem menuItem;
JMenu menu1, menu2;
JMenuBar menubar;
JFrame frame;
public MenuTest() {
frame = new JFrame("MenuTest");
frame.setDefaultCloseOperation(frame.EXIT_ON_CLOSE);
menubar = new JMenuBar();
frame.setJMenuBar(menubar);
menu1 = new JMenu("File");
menu1.setMnemonic(KeyEvent.VK_F);
menuItem = new JMenuItem("Exit",KeyEvent.VK_X);
menuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_X, ActionEvent.ALT_MASK));
menuItem.addActionListener(this);
menu1.addItemListener(this);
menu1.add(menuItem);
menubar.add(menu1);
//Build the second menu.
menu2 = new JMenu("Options");
menu2.setMnemonic(KeyEvent.VK_O);
menu2.addActionListener(this); //this does not work
menu2.addItemListener(this); // use this instead
menubar.add(menu2);
JPanel panel = new JPanel();
panel.setPreferredSize(new Dimension(100,100));
frame.getContentPane().add(panel);
frame.pack();
frame.show();
public void actionPerformed(ActionEvent e)
String s = "Action event detected. Event source: " + e.getSource();
System.out.println(s);
public void itemStateChanged(ItemEvent e)
String s = "Item event detected. Event source: " + e.getSource();
System.out.println(s);
public static void main(String[] args) {
new MenuTest();
} -
Event handler for STDIN input?
Hi,
This question will probably require a bit of context - I'm attempting to re-implement in java an application that's currently written in perl. The application is a server helper app that rewriters urls; it receives a request ID and a URL on stdin, does the necessary munging (which can require an external SOAP query), then returns the resulting rewritten URL.
Since the results can be asynchronous due to the need for external queries to build the result, this is currently a multithreaded perl app implemented using perl's POE framework to register an event handler for stdin. That handler fires each time a line of input is received, then feeds the query to a thread pool manager (POE::Component::Pool::Thread, which is conceptually similar to the Executor frameworks). The thread returns the result as a callback registered to another function in the main thread, which then populates the query/result to a cache then outputs the result (with the original query ID) on stdout. Since stdin input and the result callbacks are event-driven, there's no while(true) main loop or other blocking mechanism in the main thread. Unfortunately, it's perl-ness is causing problems due to perl's threading implementation (three words: "copy on init"), so we need to reimplement in a language with a more robust threading implementation (preferably one with copy-on-write for shared objects). So, Java it is.
So far everything's been good - Executor, Callables, and Futures work as I hoped they would for proper thread management, and the internal worker thread logic (XML processing, SOAP, regular expressions, etc) is proving rather simple to adapt. However, the main roadblock I'm hitting is that so far, I have not found a way to register any sort of event handler for STDIN input (or more specifically, InputStreamReader/BufferedStreamReader events). This could be due to search engine pollution - everything I see when I search for documentation on event listeners appears to be GUI-specific (buttons, menus, text areas/forms, etc). I'm just looking for a way to handle a line of STDIN, not a text area on a form.
Any pointers in the right direction will be much appreciated!rekoil wrote:
Maybe I need to rethink the design here...
The main reason I used a callback in the original perl is that there's a large cache structure that gets checked before the thread dispatch, and only cache misses get pushed to a thread for processing. Callbacks from the threads will then add its results to the cache. Thanks to perl's thread model, when I attempted to make the cache a shared structure - in perl, you have to explicitly mark as "shared" variables that you want visible to all threads - the structure wound up getting copied to every thread, and this gave the app an unacceptable memory footprint. So the solution was to use a callback in the main thread to update the cache.
I'm now thinking that if Java's thread model is a bit saner (i.e. a shared object doesn't get copied into every thread), then I could just have each thread update the cache, print its output to STDOUT directly, and avoid the need for the callback. I can then make my input loop simply a while() loop, waiting for the next input to dispatch. Sound sane?Yes I think so.
There is some of this I still don't entirely understand. Your loop sounds better now but it sounds to me like the process is this.
1) read from in
2) call some stuff on the basis of what came in
3) do work
4) workers produce things
5) things written back out
6) read back in??
If you're just going in/out then great. If you are going in/out/in then maybe some sort of PipedInput/Output Streams? It may well be that I got lost in your explanation in which case never mind. -
Reboot due to system error / Register dump from exception handler
hi,
I have a problem with Labview RT when using Reboot function.
The RT target (desktop) reboot but there is a message : Reboot due to system error. And if I reboot once again, the target become in safe mode.
Now, If I look at the log I obtain the following message see more in the log attached!
*** REGISTER DUMP FROM EXCEPTION HANDLER (code 0x80000003) ***
I don't understand why there is this message.
Anybody has an explaination?
Attachments:
Nouveau Document texte2.txt 6 KBjulesjay a écrit:
ok I didn't know that. I will wait for tomorrow.
NI france is not very efficient about labview Real time problems.
There is one or two experts and there aren't easily reachable.
So a lot of question I send stay with no answer.....
That why I hope someone will be able to help me.
Hi Julesjay,
After i have see your log file and the problem, i think NI FRANCE are working on your request for all problems you have in your application.
And i don't understand what you say that, because we have make test, we have send us informations for make different tests, and we are still working on your problem.
I know the problem are not resolved, but we are working for resolve it quickly.
I suggested you to contact the AE that are your service request for have more information.
Best regards,
Christophe S.
FSE East of France І Certified LabVIEW Associate Developer І National Instruments France -
Specify handler for a logger in properties file
Hello All,
Is there a way of specifying a specific handler for a specific logger within the logging.properties file? I have not been able to find any documentation on the logging.properties file settings. I am looking for something like this:
com.eric.program.handlers = java.util.logging.ConsoleHandler
com.frank.handlers = java.util.logging.FileHandler
I would rather keep all my settings within this properties file instead of coding it. If you know where I can find some documentation, please let me know. I am using J2SE 1.4.1.
Thanks.Well, after failing to assign a handler to a specific logger, I checked the LogManager source code and, alas, it only supports assigning handlers to the root logger.
What a bummer ... I think this is a real flaw in the LogManager design, especially since log4j supports assigning appenders to specific logger.
The (more or less) good news is that LogManager is designed for subclassing (by j2ee container apps, but hey) ... so you can try to add this functionality to your own LogManager and use that through the system property java.util.logging.manager.
import java.io.*;
import java.security.*;
import java.util.*;
import java.util.logging.*;
* All properties whose names end with ".handlers" are assumed to define a
* whitespace separated list of class names for handler classes to load and
* register as handlers on the logger (whose name corresponds to the property
* prefix). Each class name must be for a Handler class which has a default
* constructor.
public class CustomLogManager extends LogManager
public CustomLogManager()
super();
* Overwritten to also add handlers
public synchronized boolean addLogger(Logger logger)
final boolean res = super.addLogger(logger);
final String property = logger.getName() + ".handlers";
if ( null != getProperty(property) )
setHandlers(logger, property);
return res;
// Taken from java/util/logging/LogManager.java#initializeGlobalHandlers()
private void setHandlers(final Logger logger, final String property)
// We need to raise privilege here. All our decisions will
// be made based on the logging configuration, which can
// only be modified by trusted code.
AccessController.doPrivileged(new PrivilegedAction() {
public Object run() {
// Add new global handlers.
String names[] = parseClassNames(property);
for (int i = 0; i < names.length; i++) {
String word = names;
try {
Class clz = ClassLoader.getSystemClassLoader().loadClass(word);
Handler h = (Handler) clz.newInstance();
try {
// Check if there is a property defining the
// handler's level.
String levs = getProperty(word + ".level");
if (levs != null) {
h.setLevel(Level.parse(levs));
} catch (Exception ex) {
System.err.println("Can't set level for " + word);
// Probably a bad level. Drop through.
logger.addHandler(h);
} catch (Exception ex) {
System.err.println("Can't load log handler \"" + word + "\"");
System.err.println("" + ex);
ex.printStackTrace();
return null;
// Taken from java/util/logging/LogManager.java
// get a list of whitespace separated classnames from a property.
private String[] parseClassNames(String propertyName) {
String hands = getProperty(propertyName);
if (hands == null) {
return new String[0];
hands = hands.trim();
int ix = 0;
Vector result = new Vector();
while (ix < hands.length()) {
int end = ix;
while (end < hands.length()) {
if (Character.isWhitespace(hands.charAt(end))) {
break;
if (hands.charAt(end) == ',') {
break;
end++;
String word = hands.substring(ix, end);
ix = end+1;
word = word.trim();
if (word.length() == 0) {
continue;
result.add(word);
return (String[]) result.toArray(new String[result.size()]);
On the other hand, it might be possible to write a reusable config class which does that kind of initialization, too. -
How to configure Send Handler for BizTalk 2013 Dynamic Send Port on deployment?
Hi,
I do know how to manually configure a send handler for a dynamic send port in BizTalk 2013 Administration console. Though, once you export your application's configuration to a binding file, the dynamic send port's configuration does not
contain any information regarding the send handler. When you try to use this binding file when deploying your application your dynamic port's send handler falls back to the default host instance.
So my question is, how could we automate this process to avoid manual step in a dynamic port configuration during deployment?
Thank you,
--VladHey vlad,
As discussed at work in the office.. I woudl take the powershelll approach for now as a workaround. Here's a trivial script for my local dev box (all in one biztalk & SQL) (must be run in an x86 powershell session):
param
[string] $bizTalkDbServer = ".",
[string] $bizTalkDbName = "BizTalkMgmtDb",
[string] $fileHostInstance = "SendingHost",
[string] $sendPortName = "sm_dynamic_sp_test"
[System.reflection.Assembly]::LoadWithPartialName("Microsoft.BizTalk.ExplorerOM") | Out-Null
$catalog = New-Object Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer
$catalog.ConnectionString = "SERVER=$bizTalkDbServer;DATABASE=$bizTalkDbName;Integrated Security=SSPI"
foreach($sp in $catalog.SendPorts)
if($sp.Name -eq $sendPortName)
"Found send port $($sp.Name), analyzing send handler"
foreach($sh in $sp.DynamicSendHandlers)
if($sh.SendHandler.TransportType.Name -eq "FILE")
if($sh.SendHandler.Host.Name -ne $fileHostInstance)
"Changing $($sh.Name) send handler to '$fileHostInstance' from '$($sh.SendHandler.Host.Name)'"
$sp.SetSendHandler("FILE", $fileHostInstance)
else
"Send handler for $($sp.Name) is already '$fileHostInstance' ignorning .. "
$catalog.SaveChanges() -
Configure no. of session handled for same sql
hi, experts,
hi, if there is one report (only fire 1 sql by this report).
if only one internet explorer to run this report , it use 3 minutes to get it.
I use 3 internet explorers to run the same report but not running the report at the same time.
firstly, I run the report on first internet explorer.
then after 10 seconds, I run the report on 2nd internet explorer.
then after 10 seconds, I run the report on 3rd internet explorer.
after result on all internet explorer came, I check the sessions on the "Manage Sessions"
there are 2 sessions for same report.
How to configure no. of session handled for same sql on OBIEE?
thank you very much!shipon_97 wrote:
Here I see that at a particular time of the database , the number of session from v$session is "271" where as the number of session in the "v$resource_limit" is "280" . Here I get some differ among these parameters .
Would anybody plz tell why the no of sessions differ between v$session and v$resource_limit parameters .
The v$session views shows current sessions (which change rapidly), while the v$resource_limit shows the maximum resource utilization, like a high-water mark.
http://download-east.oracle.com/docs/cd/A97630_01/server.920/a96536/ch3155.htm
Maybe you are looking for
-
I can access on MAC 10.4.11 & Firefox 3.6.13
-
How many is too many columns in a composite index
hi all, (using 10g r2) i do realize that there is not an exact right answer, but im more curious to find out how others have handled this situation, for better or for worse... i know the literal upper bound on the number of columns that can be part o
-
Lightroom and Flickr ID feature gap
I'm confounded by Lightroom and its plug-ins' lack of support for Flickr's photo-ID. Flickr photo-ID is a unique 10, 11, or 12 digit number assigned to a photo when it is uploaded to their site. The number is used in Flickr URLs and by 3rd parties li
-
Can anyone help with my mail chimp code?
Hi there, Ive just embedded a mail chimp sign up form into the footer of my website. In dreamweaver i changed the font and positioning with css to style it how i wanted. It shows up fine in the dreamweaver design window but not upon upload. What have
-
Safari 6.0.1 not showing in System Report (installations)
I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "A