Subtitles in DVD-studio Pro to start automatically

Hi, I have a minor problem with a commercial DVD I'm making. The DVD is in Swedish language, and I have made three menus for each language, Swedish, Norwegian and English. (the actual track, video and sound is the same in all three menus and all three menus "play" button are attached to the same track. I've also made a translation in english and attached a subtitle stream to the track)
If I press the english flag from the first play menu I arrive at the english menu, here the customer wants the English subtitles to start automatically when you press "play concert". How do I do this? Do I use a script or a story? I tried to some things, but then the subtitles were visible from the Swedish menu and the Norwegian as well, and I don't want that.
Regards, Mike

There's a couple of ways to do this. The simplest is this.
Create a script - call it something like Set Lang Swed
In the script on the first line add a command 'set GPRM'
Change the source type to 'immediate' and the value to '1' and target to an unused GPRM (like 0)
Repeat steps 1-3 for the other languages replacing the immediate value to 2 & 3 respectively (still for the same target as before)
Now create another Script and call it something like 'Menu Return'
In that script add a Jump command to the first line.
Set the 'Jump to' to the Swedish Menu
Tick the Compare Command and execute if 'GPRM 0' (or whatever) is '=' to 'Immediate' with value '1'
Add another line and set that to 'Jump to' the next Language Menu then do step 8 again with a value of '2'
Repeat step 9
Set the track End Jump to the 'Menu Return' script
Set the Track>RemoteControl>Menu setting to the Menu Return script
Something like that should get you going.
Pi

Similar Messages

Exporting Subtitle from DVD Studio Pro

Is there a way to export subtitles from DVD Studio Pro or Is there a tool somewhere that will generate an STL file from a DVD Studio Pro subtitle stream?
Thanks for your help!

Yes, other than the manual -- which I have exhausted. It gave me the coding for a text-based caption, and the coding for a graphic, but not the coding that would put both on the same clip (same time value).
However, I can manually go into the subtitle inspector and add whatever element (the text or the graphic) each with its own offsets, and have them appear flawlessly together. I am convinced there must be coding that generates this effect I can use in the STL file, but I have found nothing on the web, nor any of several downloaded manuals (including pp. 456 - 460).
Any advice?

How do I prevent errors importing foreign characters into subtitles for DVD studio pro?

How do I prevent errors importing foreign characters into subtitles for DVD studio pro?
I have figured out just about everything necessary for creating subtitle tracks in several foreign languages, but the only problem is that some individual characters in some languages (like the "open quotation mark" symbol in Lithuanian!) do not import properly into the subtitle track. I can type or paste the symbols in manually, but this means doing it hundreds of times in several different languages, and defeats the purpose of using the system I've created.
Does anyone know how to import some of these odd characters.
I import characters using a text file saved in Unicode-16, and I set the language of the track to the proper language (for instance, Lithuanian).
I can't find the answer anyway, and really am stumped!!
Thank you!!

i think i might have figured out a solution. it's a quirk in the program. i noticed that sometimes the quotation marks DO actually import, but only if they are in the middle of a sentence. they only FAIL to import at the beginning of a sentence. so, what i did was to paste a space before the beginning of every sentence with a weird low-down quotation mark, and it imported fine.
and it also seems to kill two birds with one stone, because sometimes it seems that DVD studio pro cuts off a few pixels at the beginning of a line -- so with a space inserted it just cuts off...nothing.
so far so good. thank you for trying to help, Tom. MUCH APPRECIATED. this stuff can be very frustrating. i'm already going bald fast enough....erg.

Subtitles using dvd studio pro

Hellos everyone, i was wondering if anyone could tell me how can i add subtitles on dvd studio pro? how can i add the option subtitles or to add the subtitles to a dvd? is there like a tutorial on how to do this?

hi this is really easy to do in DVD SP.
first create a menu card for subtitle. in that have buttons like
ON, OFF, PLAY, MENU. as per your requirements
and you need to do small scripting works for ON & OFF
ON button scripting.
add new script from the tab.and in the script editor add the following script
set system streamst(subtitle stream1)(on)
jump(subtitle menu- play button)
jump can be as your choice. this script will activate the subtitle
OFF button scripting.
add new script from the tab.and in the script editor add the following script
set system streamst(subtitle stream1)(off)
jump(subtitle menu- play button)
this script will deactivate the subtitle stream.
make sure you assign the scripts to the desired buttons
regards
senthil
G5 Mac OS X (10.4.8)
G5 Mac OS X (10.4.8)

Importing subtitles into DVD Studio Pro 4 that were created FCP Studio 6

Greetings!
So in all the DVD Studio Pro 4 documentation, I couldn't find any work flow that allowed you to create subtitles, via *Text or Boris 3D Titles* in Final Cut Pro Studio 6 and then export or import your work into DVD Studio Pro to be used in the subtitle fields... Is that possible?
After painstakingly entering in subtitles for a feature film line-by-line, timing them perfectly to picture and making them look beautiful with crisp-text & a slight drop-shadow... It would be wonderful to import those files (as graphics files? DVD Studio Pro can import those...) in our DVD for release, with optional subtitles-- Instead of making/encoding 2 versions; with & without subtitles.
What is the best way to export these files, created for the film subtitling in *Text or Boris 3D Titles* so that we can import them into DVD Studio Pro 4 subtitle tracks... Could they be exported with an Alpha Channel so that the background is transparent? And will this then be excepted into DVD Studio Pro 4 to be placed in the subtitle fields?
Please help us conquer this seemingly-necessary procedure... I would really hate to think that to achieve this task we'd have to re-enter, re-design & re-time ALL subtitles to make our DVD... All of your suggestions would be most appreciated.
Thanks,
Jason

OK-- I love that I've found a way to answer my own question on this forum (but actually I must credit my buddy James for finding out about 'TitleExchange Pro') It looks pretty cool and should do exactly what I've asked about: Exporting/ Importing subtitles made in FCP to DVD SP...
TitleExchange Pro is a unique tool which makes complicated things simple.
If you ever wished to get your titles out of FCP into DVDSP (or another DVD authoring application), get titles into FCP from another source like DVDSP or STL, or ceate a QT with all your FCP subtitles without the need of rendering (and get automatic selection of language) or just "equalize" your FCP titles TEP will be the right tool.
There's a slight catch but it might be worth it, if this works as well as it states...Cost 135 EUR:) You can download a limited demo version that works for 30 days & 50 titles...If anyone wants to give their feedback on this software, please post it here-- We'd all be interested.
Download & more information about this process at: http://www.spherico.de/filmtools/TitleExchange/
Also, check out this video tutorial on the product... It explains exactly how to do the task-at-hand... http://www.studiodaily.com/main/minisites/finalcutpro/f/mtutorials/6851.html
Hope this finds you all well--
Peace,
Jason

How to activate subtitles in DVD Studio Pro

Hi there,
So I have my subtitle track in DVD Studio Pro already done. I would like to know how I can make it so that when someone is watching the film, they can press the subtitle button and those subtitles will appear. I think I need to use scripts, but I've read numerous posts online and have yet to find one that explains it clearly enough. Can anyone help and give me a step by step guide through the process? Thanks in advance.

http://www.kenstone.net/fcphomepage/subtitles_dvdspstone.html

Exporting subtitles from dvd studio pro

i know how to import subtitles from a txt file
but i want to know if there is a way for me to export the subtitles from dvd studio so that i have the timeline and the text
i.e.
after exporting id have a file that has ...
$FontName = Arial
$FontSize = 65
00:00:00:07 , 00:00:02:01 , I Hope This Works.
00:00:02:01 , 00:00:03:27 , If Not im ******.
and so on
is this possible?

Sorry nope!
Hopefully you have the file you imported and didn't do all the work in dvdsp.
Tools: [Annotation Edit|http://www.zeitanker.com/content/tools/zeitankertools/zeitanker_annotationedit] or [Bell Nuit Subtitler|http://www.belle-nuit.com/subtitler> might be worth a look. You could also mux the project and use [ripping tools|http://www.videohelp.com/tools/sections/subtitle] to try to get the output you want,
-Jake

Exportin subtitles from DVD Studio pro

Do you have an idea how can I export subtitles from DVD SP? I have created a few years ago subtitles for a documentary (PAL) and now they want it converted to NTSC. I was thinking on creating a new NTSC project and transferring the subtitles to it (hooping the placement won't change allot, and if so I'll just need to move it a bit. But I can't find a way to export the subtitles.

Sorry nope!
Hopefully you have the file you imported and didn't do all the work in dvdsp.
Tools: [Annotation Edit|http://www.zeitanker.com/content/tools/zeitankertools/zeitanker_annotationedit] or [Bell Nuit Subtitler|http://www.belle-nuit.com/subtitler> might be worth a look. You could also mux the project and use [ripping tools|http://www.videohelp.com/tools/sections/subtitle] to try to get the output you want,
-Jake

Subtitles on DVD studio pro 4 on txt

Hi Everyone:
This is the first time I do subtitles, and I'm completly lost, the traslator give the file in a word document format diveded in 2 columns one with the time code and one with text, I try converting this to a text (.txt) to imported but it says the time code is set up wrong or the format is not the rigth kind, I'm confused i just need to know how to spell well the time code and the texts on a txt document. Can anyboby copy a paragragraph so I can see if mine is ok??
Thanks

This is described in the subtitle section of the manual, with a sample of the text format - you should look it up to get the right formatting tags, but the generic format for the actual data is as follows:
01:00:01:00 , 01:00:04:00 , this is your subtitle
You need to have both in and out points for each subtitle. I can usually get a word file massaged into this format with a combination of table-to-text and find-and-replace steps.

Can you export Subtitles done in DVD Studio Pro

I made some subtitles in DVD Studio pro and I'd like to switch them from one project file to the next. Is there any way to do this?

Two possible ways:
1. Not sure if this will work but worth a try: Export an item description of the track with the subs in. The n open new project and import that Item description which will bring in the track complete with subs, movie and sound. If this is all you want this should work fine.
2. If however you want to actually export the subs to maybe edit elsewhere or whatever you do the same and export Item Description of the track.
Download Subtitler
http://www.versiontracker.com/dyn/moreinfo/macosx/26322
And use this to extract the subs from the Item description. Can be a bit flakey but works - make sure you have defined the language of the subs in DVD-SP and also make sure you use the Item Description Import not Auto in Subtitler. Then you can save them as STL file for use elsewhere.
Hope this helps
Steve Kirkham

Using Qmaster with DVD Studio Pro OR Qmaster requires FCP on all machines?

Greetings everyone,
After a few days of tinkering I've finally managed to set up a managed cluster. However, I have a problem (surprise, surprise). When I submit a job to the cluster, Final Cut Pro suddenly opens up on all of the computers being used. I have Final Cut Studio 2 under an academic license, and all copies report that there is another copy running with the same serial number and that they must shut down. They render a few frames before suddenly quitting the job, regardless of whether I leave the message up or OK it away. I've done some reading from this thread which makes it sound like all systems must have a copy of FCP installed, or to use a slightly different method:
http://discussions.apple.com/thread.jspa?threadID=375923&tstart=195
It's a bit upsetting as I'd originally read that systems could aid in rendering with just QMaster installed, and that they didn't need FCP installed. Hence, having FCP open up was unexpected, and I get the feeling that uninstalling FCP from those systems wouldn't help me.
But let me explain what I do normally, and perhaps some of you can guide me.
My work has me converting hundreds of tapes to DVD. Without QMaster, I would import the videos in Final Cut Pro, set chapter markers and in and out points, and then export the video (with barely any processing - an export typically takes 4 minutes on a dual 800 Mhz G4). I'd then import it to DVD Studio Pro, handle the menus, and then do a build and format. That process would take ~2-3 hours per DVD, and that is the part that I'd like to optimize.
The setup is such that I have one dual G5 wired to our hard drives (all Firewire 800), and then four other systems that connect to the G5 to access the HDs through a gigabit network switch. This has worked quite nicely in that it allows systems that only have Firewire 400 to work at Firewire 800 speeds regardless.
I'd originally thought that DVD Studio Pro 4 would automatically be able to process jobs through Qmaster, but I couldn't find a setting for it and it didn't seem to do it on its own. Instead, I was planning to redo my work flow such that the encoding of the video (the most time-consuming part of DVD Studio Pro's build procedure) would be done in Final Cut Pro. Or more specifically, it would go through Compressor. However, as I mentioned above, attempting to work this way causes Final Cut Pro to open up on all nodes within the cluster. As they all have the same serial number, they become unhappy under such conditions. I can uninstall them from the systems as I only ever use one copy at a time anyway, but as I mentioned from the link above, it seems that rendering through FCP -> Compressor will require FCP to be installed on all participating systems.
Does anyone have any advice for what to do? Is there a way to get around having FCP activate on all participating systems, or is there a way to do it directly through DVD Studio Pro (ideally in a manner that wouldn't cause DVD Studio Pro to activate on all participating systems)?
Any advice is much appreciated. The distributed encoding is really the only reason why we upgraded to Final Cut Studio 2, so I'm going to feel rather foolish if this doesn't work out.

A QCluster network isn't designed to distribute Rendering from FCP, rather it's designed to distribute encoding tasks.
As mentioned in that thread you linked to, the best workflow I can think of in your situation is to export Quicktime reference movies from FCP, then bring those reference files into Compressor for distribution to the QCluster for the transcode to MPEG 2 for DVD. There is a wealth of good information in that thread.
In short, if you attempt to use a Cluster to export from FCP, then all of your nodes will need to have separate licenses of FCP. But if you use the reference movie method, FCP is not required for the encoding.
One question for clarification with your workflow, are you logging & capturing these clips then sending them directly to DVD? or are you editing them in a timeline prior to export to DVD?
If you're just using FCP as your Log & Capture tool, then you can skip the reference movie step and just grab the captured clips in your Capture Scratch folder and send those directly to Compressor.

DVD Studio Pro Crash at Burn

All of a sudden, DVD Studio Pro has started crashing after building a DVD right at the moment it starts to burn. I have successfully burnt many discs previously. I have tried using completely different assets in brand new projects, video and still, so it can't be a specific asset. I've tried different menus. I've tried using DVDs from different brands (-R and +R). I've tried deleting the DVD SP prefs. I'm at a loss and pulling my hair out!
Thanks!
Fritz

Fritz:
Did you try building your project in your hard drive before burning?
If you can build and testyour project (VIDEO_TS) in your drive, you can try Creating Disc Image in DVDSP (from www.kenstone.net site) and burning with Disk Utility and/or Toast to check if your burning problems stay there. You could have a media problem.
Hope it helps !
Alberto

In DVD studio Pro,i had been building for good 2 hours now 64% complete.

Hi,
I used Compressor (DVD:Best Quality 90 minutes) seting for my 30 minut video. After i imported to DVD studio pro i started building prosses . I am concern with time that its taken in building .Is it posible that DVD is doing what Compressor was doing ? It is been building for good 2 hours now 64% complete. Did i do somthing rong ???
Thank you all.
Message was edited by: Mosaicp

Answer here:
http://discussions.apple.com/thread.jspa?messageID=5120603&#5120603
Alberto

In DVD studio Pro,i had been building for good 7 hours now 87% complete.

Hi,
I used Compressor (DVD:Best Quality 90 minutes) seting for my 30 minut video. After i imported to DVD studio pro i started building prosses . I am concern with time that its taken in building .Is it posible that DVD is doing what Compressor was doing ? It is been building for good 2 hours now 64% complete. Did i do somthing rong ???
Thank you all.

Multiple threads in various forums isn't going to help this go any faster. It's quite possible your workflow is at fault, or not.
If you have motion backgrounds in your menus, any sort of graphics, you should track down what DVD SP is doing with these elements and what format these elements are in.

Buy Final Cut Studio 2 for DVD Studio Pro? Pro & Cons of DVD Studio Pro?

I am thinking of buying Final Cut Studio 2 because it includes the DVD authoring software DVD Studio Pro. iDVD uses automatic settings that are hard if not impossible to alter and so some DVDs are authored with very poor bit rates.
1. Is it possible to change the bit rate manually in DVD Studio Pro so the best Quality DVD can be authored?
2. Is is possible to change the audio from PCM (which takes up a lot of DVD space) to AC-3 in DVD Studio Pro, so picture quality is improved?
3. Is there a way to buy DVD Studio Pro as a separate software package and use it with Final Cut Express?
4. Generally what other options for DVD authoring with Mac are there besides iDVD and DVD Studio Pro?
5. Is DVD Studio Pro a good piece of software or are there any particular faults?

1. Yes, but you would use Compressor for your encoding instead of DVDSP.
2. DVDSP will only encode to AIFF, Compressor will allow you to encode audio to AC3.
3. Negative. DVDSP is only available as part of Final Cut Studio 2.
4. You could try using Roxio Toast.
5. DVDSP gets the job done for me. I think it works quite well.
For a good explanation of how Compressor and DVDSP workflows work within Final Cut Studio, I'd recommend you take a look at DVD StepByStep

Subtitles in DVD-studio Pro to start automatically

Similar Messages

Maybe you are looking for