Subtotals in Bex query

I am trying to create subtotals in Bex query. Here is my current output:
                           Amount
Expenses   Groceries       10.00
           Utilities      100.00
           Overall Result 110.00
Income     Wages          500.00
           Dividends       10.00
           Overall Result 510.00
I am using structures to group the expenses and income into seperate levels. Now here is my question: How can I change the text "Overall Result" to something like "Total Expenses?"
Thanks for your help

Hi,
I am not too sure of changing the text for OVERALL RESULT.... but why don't you create in the structure another entry TOTAL EXPENSES and insert formula (as a work around)?
Cheers,
Gimmo

Similar Messages

  • Subtotals in BEx Analyzer

    Hey!
    How can I create subtotals in BEx Analyzer?
    Thanks a lot,
    Sabine

    So you want a subtotal row for every 10 customers and there is no additional information to determine these customers (for example the 10 customers are all customers with a specific postal code)?
    Which is your BW version? AFAIK you will have to go for Excel VBA macros if you are on NetWeaver2004 or below, in NetWeaver2004s it should work with Excel formula. I dont think there is an option to fulfill your requirement in Query Designer...
    Best regards,
    Björn

  • API to access query structure / bad performance Bex query processor

    Hi, we are using a big P&L query structure. Each query structure node selects a hierarchy node of the account.
    This setup makes the performance incredible bad. The Bex query processor caches and selects per structure node - which creates an awful mass of unnecessary SQL statements. (It would be more useful to try to merge the SQL statements as far as possible with an group by account to generate bigger SQL statements.)
    The structure is necessary to cover percentage calculations in the query, the hierarchy is used to “calculate” subtotals by selecting different nodes on different levels.
    I am searching now for a different approach to cover the reporting requirement - or - for a API to generate out of the master structure smaller query structures per area of the P&L. It there any class to access the query structure?
    We tried already to generate data entries per node level (duplicating one data record per node where it appears with an characteristic for the node name). But this approach generates too many data records.
    Not using hierarchy nodes would make the maintenance terrible. To generate "hard" selections in the structure out of the hierarchy an API to change the structure be also useful.

    The problem came from a wrong development of exit varibale used in Analysis Authorization
    Edited by: SSE-BW-Team SSE-BW-Team on Feb 28, 2011 1:46 PM

  • IF and ABS condition statement in BEX query designer

    Hi,
    I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
    The condition statement that I have on my Excel file is
    =IF((A2-B2)>0,ABS(A2-B2),0)
    I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
    Anyone who could help me with my issue?
    Thanks,
    Arnold

    Hi Arnold,
    Thank you,
    Nanda

  • Error while trying to Open and Delete a BEx Query in Query Designer.

    Hi Experts,
    I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
    I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
    Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
    "An error occurred while communicating with the BI server.
    As a result of this error, the system has been
    disconnected from the BI server.
    Detailed Description:
    STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
    Details text is as below:
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I have tried with SAP Note 899572, but still it's the same.
    Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
    Your time is much appreciated.
    Thanks,
    Chandu

    Arun - Thanks a million. You saved me Nine. It worked.
    Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
    Points already assigned.
    Thanks,
    Chandu

  • How can we remove the commas from the Formula value in SAP BW BEx query

    Hi All,
    How can we remove the commas from the Formula value in SAP BW BEx query
    We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
    Regards
    Venkat.

    Do you want to remove the commas when you run the query on Bex Web or in RSRT?
    Regards

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • Two problmes between  Crystal Reports 2008 and Bex Query

    Hi Gurus.
    I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
    1)     I have defined some Parameters Fields using the follow options:
    Type: String
    List of Values: Dynamic
    Value Options Level1:
                         Show on (Viewer) Panel :Editable
                          Prompt text: <text>
                          Sort Order: Ascending by value
                          Prompt With description Only : False
                          Optional Prompt: True
                          Allow multiple values: True
                          Allow discrete values: True
                          Allow range values: False
    When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than  the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
    There is any option to ability this option in the infoview.
    2)     My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
    Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
    Thanks.

    Hi Abhilash.
    Thank you for your information.
    1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
    2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
    Thank you again.

  • Status of data in Bex query shows wrong date

    Dear Experts,
    The Bex qurey after sucessful execution, show the Status of data as old date i.e. feb 2012. but we observed that the data uplaod happens regularly and sucessful.
    we tried executing the same query using RSRT/Bex Analyzer/Portal. the results are same i.e. showing incorrect status of data.
    Note: The Bex query is built on BI Infoset which sources from DSOs and Master Data infoobjects, and  BI version is 7.0.
    Kindly please help for resolving the issue.
    Best Regards,
    Mannu.

    Hi Vijay,
    The data upload has happend today also and it is sucessful, the reporing status is available for requests from respective infoproviders.
    'Status of data' is not a filed. if it an information to tell the status of data in query result.
    Please find the following steps to find the 'status of data'
    go to RSRT->give the query name and execute-> now after query results-> go to last page-> you can find the 'status of data'.
    Best Regards,
    Mannu

  • Message in BEx Query Designer Formula

    Hi Experts,
    I need to display message based on the value of the formula result. For Example:
    If K.F1 =<2.5 Then <Message: ODD>
    ElseIF K.F1 >2.5 Then <Message: Even>
    Else
    <Message: Determine the value>
    EndIF
    Thease above messages would be build in the formula column of BEx query designer
    Thanks and really appreciate your response.
    Regards,
    Waseem

    Hello,
    I have done the same funtionality with the help of workbook.
    May be experts can guide us how to display  messages in the formula column of BEx query designer.
    Thanks.
    With regards,
    Anand Kumar

  • Drilldown in BeX Query Designer

    Hello,
    I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
    Warm Regards,
    Debayan

    Hi Debayan,
    first of all, what is your requirement to create a drill down?
    A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
    1. Master data-Navigational Attributes
    2. Master data- Hierarchies
    3. Free characteristics
    As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
    Please share your exact requirement.
    Hope this helps.
    -Swati.

  • Division in bex query designer

    Hi experts,
    I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
    The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
    The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
    I have tried the following in Bex query designer
    -25124 %A -91248 = -0,02753%
    (-25124/-91248)*100 = 0,02753
    What might be the problem here?

    Thanks again for your answer,
    I will try to explain my report (requirement from the business user)
    Actual (KF)----
    Budget (KF)       
    Sales-- -91248--
    -77153         
    FSP-- -25124--
    -18918
    Margin  % -
    (FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
    Dim
    Dim
    Result
    The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

  • % Calculactions in Bex Query Designer

    Hi Experts,
    Could you please on how can i perform the below % Calculactions in Bex Query Designer.
        Vendor No line item Not = L category =A  status =RFQ :for items
    Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
    requament: % RFQ Without Response:
    Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
                                                                   ( 4/5 * 100= 80%)
    Percentage RFQ without response= 100 -  Percentage of Quotation response
                                                                  =  100-80 = 20%
    How can i perform the % Calculations in Bex Query Designer.
    Vendor
    Purchasing document
    Indicator: Line Item
    Purch. doc. category
    Purch. doc. status
    Item
    Number of Records
    category A item L
    200274
    V-LINE EUROPE EXPORT MARKETING
    6000003778
    L
    A
    Not assigned
    10
    1
    20
    1
    30
    1
    6000003779
    Not assigned
    A
    Not assigned
    40
    1
    9000000046
    Not assigned
    A
    RFQ
    10
    1
    1
    20
    1
    1
    30
    1
    1
    40
    1
    1
    Result
    8
    4
    thank you

    Hope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
    Your formulas seems to be straight forward.
    Keep in Filter: item Not = L category =A  status =RFQ
    You may start working on it and get back with if you are struck.

  • Where to write IF THEN ELASE statements in BEX Query Designer

    Hi All,
    I need to write a formula in query designer...
    saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
    So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
    where can i write this logic to perform calculation ...
    Thanks in advance..
    ravi.p

    hi chetan,
    No its not work.. why because i  need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'.  this is  attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
    I can change these values in update rules by writting  Routine.. But I need to convert it in KGS at BEX Query Designer Level..
    I need calculate like this
    quantity sold * Gross Weight. 
    here Gross Weight is the formula variable which replacing the values of gross weight...
    i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
    is there any solution to solve this Problem...

  • Results based on From and To value in Bex query designer.

    Dear all,
    We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
    I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
    Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
    I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
    To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
    How to get my requirement achieved in the Bex query designer.
    Experts suggestion with steps will be very useful to solve my problem.
    Regards,
    M.M
    Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

    Hi Magesh,
    I think you could try one more way.
    Create a formula inserting your two formula variables for limits .(FV -  are ready for input ) .
    The formula would return the result as 1 or 0 because it would have boolean condition in it.
    You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
    You formula A would look like
    ( KF > FV1) AND (KF < FV2) * 1.
    And in the condition put A EQ 1.
    You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
    Regards,
    Sunmit.

Maybe you are looking for