Suddenly "Fatal error during GPU init" during boot - radeon

Hi,
after a rather abrupt shutdown my system doesn't boot correctly anymore.
I have an Asus laptop with an ATI radeon HD 2400 (so the sticker on the laptop says - I'm not really a hardware guy)
Before:
While booting, the kernel/console output had bigger, somewhat non-high-resolution letters. Halfway in, the letters changed into a smaller, higher-defined font which was more "beautiful".
Sorry, I don't know what mechanism that is, so I had to describe it that way.
After:
This doesn't happen anymore. Rather, I get this message during boot (this is a copy out of /var/log/errors.log):
Jun 21 17:59:55 localhost kernel: [    4.081919] radeon 0000:01:00.0: Fatal error during GPU init
Jun 21 17:59:55 localhost kernel: [    4.082998] radeon 0000:01:00.0: no bo for sa manager
Jun 21 17:59:55 localhost kernel: [    4.083059] [TTM] Trying to take down uninitialized memory manager type 1
I already tried the following:
- reinstall xorg and xf86-video-ati
- sections "Enable KMS" and "Troubleshoot KMS" from that wiki entry:
  https://wiki.archlinux.org/index.php/ATI
- scream and slightly hit the side of the laptop
Nothing worked. Could anyone tell me where to continue searching? I'd hate to reinstall a 1-week old system.
Thanks in advance,
Alex

If you remove the ati drivers, the mesa-drivers are used I think.
Since the open source drivers don't work, you should try the closed source drivers (ATI Catalyst) from the AUR. Installing this is a bit of a hassle. The catalyst driver does not support Xorg 1.12, so you have to add a repository for Xorg1.11 and downgrade (see the wiki page). Then, you should install either catalyst-utils and catalyst-hook from AUR (as described in the wiki) or catalyst-total (which combines both and is also mentioned in the wiki).
See the Catalyst Wiki for all information.
Catalyst Utils in AUR
Catalyst Hook
Catalyst Total
edit: I just read the wiki. It seems like there is an easier way to install things now: https://wiki.archlinux.org/index.php/AT … repository
Last edited by Terminator (2012-06-25 23:32:39)

Similar Messages

  • W500 not starting - HELP - unable to locate BIOS ROM; Fatal error during GPU init

    hi gurus, 
    Following problem: 
    when i start W500 (ubuntu) it stays with the black screen, not even displaying initial ThinkPad message, where you might press the ThinkVantage blue button, to go to BIOS. It just stays black and does nothing. 
    Than I press Power button for a few seconds to shut it down and try again. Still black screen. 
    The same procedure again and again and sometimes  W500 boots up, sometimes wants to go to recovery mode, sometimes not. 
    Sometimes, after the black screen it displays the message:
    Invalid ROM contents
    ERROR Unable to locate BIOS ROM
    Fatal error during GPU init
    Anyone had the same problems?
    What are the possible checks i might execute, to check up W500?
    cheers
    lenowiow

    Update: I have now tried compiling vbios.bin and int10.bin directly into the kernel. No success.

  • Received Non-Fatal Error 5904: LV 7 during use of Labview application. What does this mean?

    'Non-Fatal Error 5904'. LabView 7 application.  'Source: Comm Analyzer - CP Analog - Adjust Input Level.vi:CP RX Audio Muting.vi'  (MRTE 3.0 - Anritsu CDMA Test System)
    What does this mean?
    /BCU002
    Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com

    Xaq,
    Here is the comment that was passed about the error source: Comm Analyzer - CP Analog - Adjust Input Level.vi:CP RX Audio Muting.vi
    The application has been working fine for about 12 years, it continues to serve its purpose and the RF test equipment rack components are now obsoleted by newer models but it's still in weekly use and is kept calibrated annually but on occasion it unexpectedly throws an error like this while I'm using the test rack during a wireless RF parametrics test and it leaves me wondering if the root cause is the device under test or the test rack.  That's why I was hoping to find a detailed description about the error code.
    /Bruce
    /BCU002
    Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com

  • RC-50004: Fatal: Error occurred in ApplyDBTier during adcfgclone.pl

    Hi,
    While running adcfgclone.pl, I am encountering <RC-50004: Fatal: Error occurred in ApplyDBTier> message.
    Full log is
    - >
    RC-50004: Fatal: Error occurred in ApplyDBTier:
    StackTrace -
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
    at java.lang.reflect.Constructor.newInstance(Unknown Source)
    at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
    at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
    at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:802)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:150)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:131)
    at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1789)
    at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1608)
    at oracle.apps.ad.clone.ApplyDBTechStack.runCVM(ApplyDBTechStack.java:646)
    at oracle.apps.ad.clone.ApplyDBTechStack.runAutoConfig(ApplyDBTechStack.java:699)
    at oracle.apps.ad.clone.ApplyDBTechStack.doConf(ApplyDBTechStack.java:369)
    at oracle.apps.ad.clone.ApplyDBTechStack.doApply(ApplyDBTechStack.java:397)
    at oracle.apps.ad.clone.ApplyDBTechStack.<init>(ApplyDBTechStack.java:313)
    at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:104)
    ... 6 more
    Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    ... 19 more
    ERROR while running Apply...
    Wed Oct 19 10:35:53 2011
    ERROR: Failed to execute /d03/oracle/sid/db/tech_st/11.2.0/appsutil/clone/bin/adclone.pl
    < -
    Can someone help me to resolve this issue?
    I think this is different than the similar errors in Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]...

    Yes, I have 11gR2 database at the moment.
    To make sure... Are you referring to the target database system?
    Now, I am still in the middle of cloning, and when I tried to run sqlplus I get the error saying that <SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory>.
    So yes, failure occurred in the early stage of running adcfgclone.pl script.
    I took some more logs before RC-5004 error message.
    ->
    Beginning database tier Apply - Wed Oct 19 10:35:14 2011
    APPS Password : Log file located at /d03/oracle/SID/db/tech_st/11.2.0/appsutil/log/CONTEXT/ApplyDBTier_10191035.log
    | 0% completed NON-COMPLIANT: /d03/oracle/SID/db/tech_st/11.2.0//oraInst.loc does not point to an inventory inside the current ORACLE_HOME
    Rapid Clone only supports oraInst.loc at that location if its content points to an inventory inside the same ORACLE_HOME
    Please make the necessary changes to the following file:
    /d03/oracle/SID/db/tech_st/11.2.0//oraInst.loc
    running OUI CLI home cloning:
    /d03/oracle/SID/db/tech_st/11.2.0/oui/bin/runInstaller -clone -silent -force -waitForCompletion -invPtrLoc /etc/oraInst.loc ORACLE_HOME=/d03/oracle/SID/db/tech_st/11.2.0 ORACLE_BASE=/d03/oracle/SID/db/tech_st/11.2.0 ORACLE_HOME_NAME=SID_db112_RDBMS
    \ 0% completed
    RC-50004: Fatal: Error occurred in ApplyDBTier:
    <-
    In addition, oraInst.loc is existing in the target ORACLE_HOME directory, owned by the target oracle user.
    oraInst.loc has
    inventory_loc=/oracle/oraInventory
    where oraInventory has the right permission drwxrwx---

  • Windows Server 2012R2 Fatal Error C0000034 when trying to boot

    Hi.
    We patched our Server 2012R2 DC today to fix against CVE-2014-6324 using Windows update. After rebooting, we are now unable to boot and receive the error stated in the title when trying to boot.
    Our primary DC however had no issues applying the update and rebooted perfectly fine.
    I can only seem to find articles relating to Windows 7 SP1 regarding this error code. Is there a method for recovering this with Server 2012R2?
    Thanks.

    Hi，
    I think we could check if other update installed correctly.
    Did you try to remaing pending.xml file to check the result?
    http://blogs.technet.com/b/joscon/archive/2011/03/16/new-information-on-error-code-0xc0000034.aspx
    Regards.
    Vivian Wang

  • HP Mini 210-2090NR malware and fatal error after update

    Hi, 
    I have an HP Mini 210-2090NR with Win 7 starter. I had malware that kept trying to contact websites like adclick, etc. It tried an auto update and then got a one line "fatal error". Now it will boot to the quickweb but not the OS. I tapped ESC until I got a menu and tried F11 but the screen just goes completely blank. Is the recovery partition toast or is there another way to access it? 
    Thanks,
    Matt

    The error message- Replace hard Disk 1 is a clear indication that your hard drive has gone faulty on the Notebook and needs to be replaced. 
    I would strongly recommend you to back up your files if its possible and apart from replacing the hard drive with a new one, there is no other option to fix this issue on the Notebook
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • VIA Raid 0: Red screen of Death - fatal error during boot sequence

    I have been using two Maxtor 120GB SATA drives in a RAID 0 array on my Athlon 64 MSI MB.  I have occasionally had messages saying "Hard disk error. Can't find drive 0".  I've assumed that this has been a driver issue because if I power down, wait a while I can reboot and continue without issue (other than chkdsk running during boot up).  However after the last such error, when I next tried to reboot I got an error message as the RAID was initialising.  The error message was in a red box on a black screen and stated that there was a fatal error and that the raid relationship and all HHD would be destroyed if I continued.  Naturally I switched off at this point, but on rebooting got exactly the same message.  Eventually, as I have backups, I continued past this point and sure enough the RAID had gone.  So I rebuilt the raid array and everything seems to be OK.
    However, I'd forgotten that my MSI DVD burner was incapacitated due to a failed firmware update so had temporaril;y replace it with a DVD rom drive to get access to my backups.  BUT the drive won't read all my backup discs, in particular it won't read the Drive C backups .
    Has anyone else had this RAID erro.  Is it a driver error or is it a dsik failing (even though they were new at Christmas).
    I am using a Superflower power supply which has 22A on the 12V rail
    1GB PC3200 ram by A-Data (CAS 2.5)
    Elderly HP 9100 CDRW
    MSI DR-8 DVD RW
    Ethernet card
    Radeon 9600 128MB
    AMD64 3000 processor
    Freeflow

    Raids do not really help benchmarks unless you considure hard drive benchmarks. Most games and benchmark proggies load everything they need prior to running. So unless you have a low memory condition that forces the game or benchmark to use the swap file the only place that you would typically see any gain in speed is during the loading of the game or benchmark. That is hard to quantify other than through experience.
    Where a raid shines is in file tranfer situations. When you create and save large files such as movies, Reading or copying large files, defragging, or any other massive file effort. Overall the gains can be very small compaired to the rest of what you do with your system. However that is not to belittle what a Raid does. It does give a finer sheen to the overall computers operations and will make sluggish file transfers seem much more bearable overall.

  • Fatal error during installation

    I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
    Thanks,
    tuvixcrc

    Hi,
    Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
    1. Re-download the Visual studio from Microsoft official site here:
    http://www.visualstudio.com/downloads/download-visual-studio-vs
    After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
    Refer to the below page to know checksum detailed number:
    http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
    Refer to
    Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
    2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
    3. Clean your %temp% folder and run the installer with Administrator permission.
    Look the links to get more information:
    http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
    If that still cannot go on the VS installation, please use
    http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
    https://Onedrive.live.com/ and share the link here.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • Keep getting "Fatal error during installation" messages on install of 7.0 SP1

    Hi,
    I keep getting the following error on installation (dialogue box) on Win2K
    of WLS 7.0.1.0:
    "Fatal error encountered during file installation. The installer will now
    cleanup and exit! [file size error for E:\ ...]"
    While this looks like an obvious file download error I have pulled down the
    full download 3 times and the network download once and it keeps happening.
    Note that when the installer first starts it says it's doing a checksum
    check and this passes OK. The errors only occur during individual file
    installation. What's more is that it occurs at different points in the
    install process (any time between about 20% and 60% completed).
    Weird. Note that I have previously had WLS installed on my system before.
    Any ideas much appreciated.
    regards
    --malcolm

    Hi Malcolm:
    you were getting -- "[file size error for E:\ ...]"
    the installation worked on the C: drive.
    > Yes I have a number of partitions C: thru E: with D: being System part (C:
    > is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
    > used 10GB and 1.5GB free.
    Since I cannot see your system and explore the used and free space, and I am not a
    Windows 2000 file management expert, I can only speculate on the causes.
    Maybe your E: drive is very fragmented and Windows cannot find enough clusters or chunks
    to let this complete. The Win95 partition is a FAT16 format; the others are NTFS.
    Perhaps there is more free space on C:, or Windows can better get what it needs when
    allocated in smaller portions.
    Where is the "platform701_win32.exe" file when you execute it?
    I am wondering if it is stored on a FAT16 drive.
    Are you using PartitionMagic? Can you give more space to E: or change cluster sizes?
    I asked about the swapfile because I am thinking about areas that grow and shrink, and
    could cause trouble at varying points as you described. So, there are TMP and TEMP ?
    Later,
    Wayne
    Malcolm Robbins wrote:
    "Wayne W. Scott" <[email protected]> wrote in message
    news:[email protected]...
    Malcolm Robbins wrote:
    Wayne,
    are you there? Any ideas?Yes. I didn't see any follow-ups for awhile, then I was very busy at theoffice.
    Your downloaded file is probably okay, but I will compare to one of mine.
    Including yours here for my own reference.
    ====
    file = platform701_win32.exe
    checksum = 3657019252 (as reported by cygwin)
    size = 283,279 KB (win2k) or 290076933 bytes (as reported by cygwin)
    ====
    "Fatal error encountered during file installation. The installer will now
    cleanup and exit! [file size error for E:\ ...]"
    * I'll bet you are running out of space on the E: drive!
    Is E: one of your partitions? How much free space is on it?Yes I have a number of partitions C: thru E: with D: being System part (C:
    is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
    used 10GB and 1.5GB free.
    Are you telling it to use the E: drive?Yes.
    Can you use C: ?I suppose I could try, if that matters ???!!!
    --- I just tried it and it all worked!!! Why is this? I don't really want
    to keep it on C:
    Where is the Windows swapfile?It's on D:
    Please search your system -- all drives -- for 'registry.xml' and show
    what is found.
    Wayne

  • L7780 fatal error during installation

    Hi,  I recntly purchased a Lenovo Yoga 3 Pro , and am trying to install and connect to my L7780 all in one machine. I have downloaded the original driver from the HP site , and when trying to complete the installation I get a "fatal error during insatllation " message. I have already tried following all the steps as outlined in the HP Windows 8.1 troublshooter utility to no avail. I have also double checked, the HP update installer utility which states that I have all the latest versions of drivers installed . I look forward to your feedback.   

    Hi jg72, Thank you for your reply!
    Please try the following steps: Uninstall the software. Uninstalling the Printer Software.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Windows Firewall from start to finish.Create a new user account. Managing User Accounts and Logins (Windows 8).Reinstall using the HP Printer Install Wizard for Windows.
    Hope this works!  “Please click the Thumbs up icon below to thank me for responding.”

  • Getting fatal error during installing winxp

    Hi
    I have install Oracle virtual machine 4.1 in windows 2008 server, and I wanting to install winxp in that.
    I have winxp ISO I am trying to boot the same via ISO image but its giving the following error, I have no physical CD/DVD drive I also try with deamon Tool also with mounting winxp ISO but getting the same error
    FATAL: could not read from  boot medium ! system halted.
    Please guide for the same.

    Welcome to the forums @MuzikizuM 
    I read your post about the installation error you are seeing for our Deskjet F2180. I would suggest trying out the steps in the guide below. Hopefully this will allow you to install the printer successfully!
    A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    Let me know the results
    Have a great day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • A fatal error was reported by SAR firmware during initialization

    Dears,
    After upgrading the SMU to one of our IOS XR GSR, we got the following error:
    g_spa_2[173]: SPA ATM1/2 SAR: A fatal error was reported by SAR firmware during initialization: Firmware version mismatch [Error code 2002]. SPA will reset
    The line card went into constant reload.
    I could not locate any bug related.
    Could it be hardware issue ?
    Thanks,
    Michel.

    it could be the wrong hw rev for the atm spa is used (I thought you needed a V2).
    that could be part of the problem.
    alternatively, I would let the SIP boot without the SPA, invoke a fpd update, insert the SPA, try to update the fpd of the SPA, if that still fails, I think you need to open a tac case.
    doesnt look like a hw failure to me, but this is a hw issue (fw revision situation)
    regards
    xander
    Xander Thuijs CCIE #6775
    Principal Engineer 
    ASR9000, CRS, NCS6000 & IOS-XR

  • Adobe Illustrator CS3: Fatal error during installation

    Hello,
    I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
    "Install Adobe Illustrator CS3"
    A window showed:
    Initializing Adobe Illustrator...
    Then I got a message:
    "Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
    I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
    Can anyone help? Thanks!!!

    Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

  • Itunes: Fatal Error During Installation (it wont download at all) HELP!

    Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
    +*Preparing to install...*+
    Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
    Then another window pops up saying:
    *+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
    *+Verify that you have access to that directory.+*
    and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
    so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
    *+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    +*Verify that you have access to that directory.*+
    Then after this i went to the folder
    +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
    WHAT DO I DO?!?!? please can someone help me
    The details for my computer are:
    Microsoft Windows XP
    Professional Version 2002
    Service Pack 2

    if it helps at all...
    I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
    and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
    ...is there any possible way that anybody can help me out with this.
    any help that anyone can offer is very greatly appreciated,
    Please & Thank You.

  • Fatal Error during Installation of Weblogic Application Server 11g (10.3.4)

    Hi,
    I have installed Weblogic server 10.3.4 in the first attempt but when I was deploying an ear, Server gets crashed (JDK was crashed) and after that I was unable to start the server because it was giving an error for JDK.
    Then I uninstalled existing Weblogic server and tried installing server (same version using same setup) once again but it is not allowing. It is asking me for directory (WLS Home Directory), Complete/Custom and when installing finally, it is flagging an error (when 39% installation is complete) "Fatal Error encountered during file installation, the installer will now cleanup and exit! C:\<Home Directory>\wlserver_10.3\common\bin\consol.exe (Access is denied)".
    Can any one please help me in resolving this error. Thanks in advance
    Regards,
    Priya

    Hello,
    You need to check the permissions on the middleware home directory.  Give permissions and then try to install weblogic server, it will work. 
    Are you trying to do first time weblogic server installations.  If you have already domain created then from there also you can create a seperate domain
    Regards

Maybe you are looking for