Windows Server 2012R2 Fatal Error C0000034 when trying to boot

Hi.
We patched our Server 2012R2 DC today to fix against CVE-2014-6324 using Windows update. After rebooting, we are now unable to boot and receive the error stated in the title when trying to boot.
Our primary DC however had no issues applying the update and rebooted perfectly fine.
I can only seem to find articles relating to Windows 7 SP1 regarding this error code. Is there a method for recovering this with Server 2012R2?
Thanks.

Hi，
I think we could check if other update installed correctly.
Did you try to remaing pending.xml file to check the result?
http://blogs.technet.com/b/joscon/archive/2011/03/16/new-information-on-error-code-0xc0000034.aspx
Regards.
Vivian Wang

Similar Messages

"NTLDR is missing" error message when trying to boot R&R Recovery from USB HDD? !

Does anyone know what/why I am getting a "NTLDR is missing" error message when trying to boot from USB HDD? I copied my backup to a USB HDD and made it bootable via R&R but I am still getting this error. Help!
I have a T61 if that helps any.
Brad
Brad R
T61 4GB RAM Intel T8300

the master boot record (MBR) needs to be repaired for that to work.
what OS are you using?
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Sysprep error in windows 7 a fatal error occured while trying to sysprep the machine

please any one help me i am struggling last 3 day with sysprep command,
I want to sysprep the windows7 system which is genuine professional version and updated with Microsoft patches, i installed all applications and drivers to that system,
When i doudle click sysprep icon selected oobe /generalize/reboot
Then it give error a fatal error occured while trying to sysprep the machine
then i checked log file in prefeth folder
2009-11-24 16:17:22, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2009-11-24 16:17:22, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
please help me........

Solution for the sysprep fatal error is to clean partner folder i.e. Go to Sysprerp folder i.e.
c:\windows\system32\sysprep\partner
Check below guide for more info...
http://www.vmwareandme.com/2013/10/solution-windows-8-and-windows-81-fatal.html
http://www.vmwareandme.com/2013/10/guide-fatal-error-occurred-while-trying_23.html
www.mytricks.in

Fatal Error message when trying to install software

I get a "Fatal Error: Required NIPathsDir property CVIDIR is undefined".... when running the Labview 8.2.1 installer .. The solution for KnowledgeBase article on this problem was either incorrect or was unclear in exactly how the solution was to be implemented...

ClintM....
Yes .... I have a "My Documents" folder in the standard location and I am logged on as administrator.... I've got the "Academic Site License Spring 2007 Labview Core" installer disc (DVD) but I can't find a version # of the installer. I'm trying to install Labview 8.2.1 on a Sony Vaio Laptop....
Engtech4

New windows 8 laptop gives error 800 when tries to connect to vpn and it is unable to connect to softphone as well.

Hi,
I am trying to switch over my work computer from a windows 7 laptop to a new windows 8 laptop so far I have not been able to connect to the VPN on windows 8. The windows 7 connects without an issue and is still connected. The same for my softphone using
the same settings it connects on windows 7 but says account failed to enable on windows 8. I am only using windows defender as I uninstalled the anti virus software that came pre-installed.
Any help on this issue will be greatly appreciated!

Hi,
Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or security parameters may not be configured properly for this connection.
Please temporarily disable Windows firewall and Windows defender to check if that helps.
Regards,
Kelvin Xu
TechNet Community Support

Windows 8 user getting error 2343 when trying to uninstall iCloud

I had to uninstall iTunes & all associated files due to a sync issue with a new device. Anyway. I uninstalled iCloud 3.1 with no problems. I then tried to uninstall v3.0.7! I get error 2343.
I have cleared the registry, updated all my windows services, reinstalled iTunes - everything now working great, apart from I can't reinstall iCloud.
Any help would be greatly appreciated.
Thanks

>neither in the adobe site.
If you go to the thread list for Reader and choose "Search Forum" and use 1316 as your search parameter, you get tons of hits.

"Fatal error 65" when trying to update firmware of printer

Printer firmware update fails with "error 65" displayed on the printer screen.
I have HP LaserJet Pro 200 color MFP M276nw, just a month outside the warranty window. Downloaded the latest driver M270_colorMFP_Series_FW_Update-20140718.exe, and followed the instructions on how to update.
The PC running the install shows no error and I get the smiley face at the end. However, printing configuration still shows the old 2012 driver. Also, the printer display does not display progress as mentioned in the isntall instructions. Rather, at one point it displays "Error 65" and then reboots.
How can I update the firmware?
This question was solved.
View Solution.

Hi,
Please ensure the printer is connected to your PC with a USB and not through the network, then try updating the firmware using the following tool and not the one mentioned above:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-5&cc=us&dlc=en&lc=en...
Please let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HT4623 I'm getting an error notice when trying to boot up my iPhone 5 it says error 2324

What is error 2324 ?? It's coming up when I try to authorise my iPhone 5... - matt

When specifically does the error occur?
Is it on the iPhone or in iTunes?

RAM error beep when trying to boot install disc

I'm trying to re-install OSX in order to get a clean system and upgrade the OS. However, if I try to boot from the OSX Leopard install disc, I get the three RAM error beeps. I bought new compatible RAM (2x2GB SODIMM), tried with one of the old banks, then the other, in both available slots, then the new RAM - nothing helps: Booting the system with no install disc inserted works fine, having it inserted results in the beeps. It doesn't matter if I try straight boot, pressing C, using rEFIt or going for the device's own pre-boot OS selection menu, nothing helps.
I had the screen replaced on warranty a couple weeks ago, but I do not assume that poses a problem. Can anyone help?
Thanks!

Why do you have rEFIt installed?
To be able to multi-boot OSX, Win7, and Ubuntu.
What is your machine and what OS X does it have?
Early 2011 MacBook Pro 15" non-glare screen. 4GB stock RAM.
What's on the disk 10.5 or 10.6?
The disk is Leopard, as far as I can remember. I believe I got Snow Leopard over the App store.
Have you cleaned the disk, use another?
I don't exactly have another disc ... but I tried to image them to a SD card and that gave the same results.
What are you trying to do exactly?
Completely wipe the drive (low-level) to be able to sell the device.

Error icon when trying to boot up

I was working on my black macbook when suddenly everything froze up, I gave it time to load but I eventually just restarted. Since then my computer starts with a grey screen then shows a file icon with a question mark in the center, it doesn't boot up and eventually just shuts off after flashing this icon for a few minutes. What's happening and what can I do?

Then the best thing to do is call up Apple and request a box be mailed to you. They'll send the box free of charge & do any repairs that are necessary. Alternatively, you can have your installation discs sent to you from your home to do some more troubleshooting.
Unfortunately, if you send the machine in for repair, they won't save any data off the hard drive.
~Lyssa

Windows Server 2012R2 fails to get update from WSUS with error code 80072ee6

Hi all,
I've deployed WSUS role on a Windows Server 2012R2 machine. WSUS listen on port 8530. Now I'm trying a test server (this machine runs WIndows Server 2012R2 too). I've configured a GPO but when I try to check for updates I get the errore in the subject.
I've checked windowsupdate.log and theese are the settings of the client:
AIR Mode is disabled
2014-02-05 12:59:00:357
776 fe0
AU # Policy Driven Provider: http://MyWSUS.MyDomain.local:8530
2014-02-05 12:59:00:357
776 fe0
AU # Detection frequency: 22
2014-02-05 12:59:00:357
776 fe0
AU # Target group: CSM Servers
2014-02-05 12:59:00:357
776 fe0
AU # Approval type: Pre-install notify (Policy)
2014-02-05 12:59:00:357
776 fe0
AU # Auto-install minor updates: No (User preference)
2014-02-05 12:59:00:357
776 fe0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
I confirm that from the test server I can telnet to my wsus server on TCP port 8530

Hi,
This issue occurs if the URL under the Group Policy setting 'Specify intranet Microsoft update service location' is invalid.
You receive a "80072EE6" error code when you download an update from Windows Server Update Services in Windows 7-based or Windows Server 2008 R2-based
computer
http://support.microsoft.com/kb/2724184
Make sure that the URL is correct and the name can be resolved.
Hope this helps.

Keep gettig this error message when trying to connect to Firefox The proxy server is refusing connections.

Redownloaded Firefox and continue to get this error message when trying to connect: The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Go to Options > Advanced > Network > Connection > Settings and choose "No proxy".
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
It is important that you keep IE updated. The information included with your question, indicates that you are using IE7; you should update to IE8 for your own protection. IE9 will not be made available for Windows XP.
*http://windows.microsoft.com/en-US/internet-explorer/products/ie/home

Error While installing Visual Studio 2005 in windows server 2012R2

Hi Team
One Help
I am using windows server 2012R2.I want to install visual studio 2005.
i downloaded VS 2005 from :
http://www.microsoft.com/en-us/download/details.aspx?id=804
while installin i am getting this error :
"the upgrade patch cannot be installed by the windows installer service because the program to be upgraded or missing or upgrade patch may update a different version of the program.Verify that progam to be upgraded on exiting computer that you have
the correct upgrade patch"
PLease help us.
Thanks,
Bob

Hi Gopi,
Are you trying to add the hosts to your OEM 12c, and then choosing "Deploy Agent"?
Please check this error message about the image file..
The image file C:\oracle\core\12.1.0.2.0\jdk\bin\java.exe is valid, but is for a
machine type other than the current machine.
"Validating OMS_HOST & EM_UPLOAD_PORT failed."
If the agents are deployed earlier from another OEM12c server, please undeploy them and then try.
Thanks,
Rajiv.

Windows Server 2012R2 Failover Cluster error with mounted volumes

Hi all,
I've a problem with mounted volume on a WSFC build on top of Windows Server 2012R2, the situation is:
M: is the volume hosting mounting points
disk-1, disk-2, disk-3 are volume mounted on M:\SomeFolder
Theese volumes are used by a SQL Server Failover Cluster Instance, but my problem is related to WSFC. I've set dependencies so disk-1, disk-2, disk-3 depend upon H:
If I try a failover of the role "SQL Server" I observe that when the disk come online in the other node they fail with this error:
Cluster resource 'disk-1' of type 'Physical Disk' in clustered role 'SQL Server (ISQL2014A)' failed. The error code was '0xaa' ('The requested resource is in use.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
If I manually take offline H: and than bring it online and then manually take online all disk (1 to 3) they come online with no error.
I'm going crazy!

I've found the root of the problem: the servers are virtual machine on a VMware ESX 5.5 infrastructure, VMware claims that on 5.5 multipath is supported for raw device mapping disks but disabling multipath (I've set to fixed path) the Windows Server Failover
Cluster stops to get problems.
Now we have opened a support call with VMware.

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Windows Server 2012R2 Fatal Error C0000034 when trying to boot

Similar Messages

Maybe you are looking for