Suddenly the bottom part of the browser window, under the slide bar, has vanished. I can't see where it says Done, or a website name or all the icons on the right side

The window just ends right below the slide bar. I tried closing the window and reopening it, even restarting the computer, but it didn't fix it. At first I thought the window was too big, so I tried resizing it, but it didn't work.

You have out-of-date plugins with known security issues. You need to update them.
* Macromedia Shockwave for Director Netscape plug-in, version 8.5
**Very old version. Probably best to uninstall before installing new version. Windows Start > Settings > Control Panel > Add or Remove Programs, click "Adobe Shockwave Player 8.5", click Remove. Then install current version.
* Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers (new security update released 10-12-2010)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions: http://www.java.com/en/download/faq/remove_olderversions.xml
#* After the installation, start Firefox and check your version again.

Similar Messages

  • Captions of photos in Yahoo cover the bottom part of pic. Makes it hard to read text and also can't see whole photo. Tried reset Firefox but that didn't work.

    When going through photo galleries on Yahoo (in news, omg, etc.) the caption is displayed on top of the bottom 'fifth' of the photo. (The caption should be below the entire photo.) The way the pations are overlayed makes it difficult to read the text of the caption and worse, it makes it almost impossible to see the lower fifth of the photo. I tried resetting Firefox but that didn't change anything. I can't find any yahoo settings or OS X display setting that changed this. I'm using Firefox 25 on a macbook air running OS X 10. Are there any firefox settings that would improve this? Thanks.

    You can also try to reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Command+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
    *Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow pages to choose their own fonts.
    *Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

  • On sites like Facebook I have 'pop ups' from applications. I want these to be there, and they do come up, however, only HALF the box shows up, i cannot see where it says "post" or "ok" or "cancel" i have tried to drag the box to make it bigger so i can

    I want popups on Firefox from Facebook applications. i DO get the pop ups, however, the box is only HALF there so I cannot use it. When the pop up comes up, i cannot see where it says "post, ok, cancel" I cannot do anything with that box. i try to drag it to see the bottom of the box, but it will not resize. i have to go back and use IE to get those pop ups to post to my page. how do i get the full box up?
    == This happened ==
    Every time Firefox opened
    == always

    I have the exact same problem!!! I do not have the problem in IE. I prefer using FireFox, but I have to use a different browser for facebook. :(

  • The bottom part of my safari window is missing!

    When I open safari the top half of my address bar is there but the rest of the page is missing.  I can press the green expand button and the rest of the page shows up, except for my bookmarks bar.  I logged on with another user and safari is fine.  How can I fix it on my account?

    Check Safari / Preferences - Extensions. If you have any installed, turn that off, then relaunch Safari.
    If it's not Extensions, then follow the instructions here for troubleshooting third party Safari add ons that may be preventing the page to render correctly.
    http://support.apple.com/kb/TS3230?viewlocale=en_US
    And from the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

  • HT1212 My iPhones screen is broken(a black screen and the touch function does not work). I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

    My iPhones screen is broken(a black screen and the touch function does not work).I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

    i don't see a way for you to back up your phone, because it will require you to unlock the phone. 

  • HT201406 why is the touch on the bottom part of my screen not working all of a sudden on iphone 4s?

    all of a sudden over night the bottom part of my screen does not react to touch  i have moved the bottom row icons through itunes but this still doesnt allow me to use this section of the screen once im inside an app. such as banking?????????

    Hi zoejane1710,
    Thanks for visiting Apple Support Communities.
    It sounds like your touchscreen is being unresponsive. The steps in this article can help:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    Jeremy

  • Hello, I recently cracked the bottom part of my iPhone 5 right by the home button, would it be beneficial to put a screen protector over the cracks so it won't break anymore? I've cracked it twice now and can't afford to fix it again

    I recently cracked the bottom part of my iPhone 5 right by the home button, would it be beneficial to put a screen protector over the cracks so it won't break anymore? I've cracked it twice now and can't afford to fix it again

    How did you crack the screen using a Lifeproof case?? 
    http://www.otterbox.com/defender-series/defender-series,default,pg.html

  • The bottom part of display whiter than the rest, white on right side more brownish

    So I got a new replacement of my Thunderbolt Display, this time the one I got is straight (previously left side was lower than the right side), however I can see in new one that the bottom part of the display seems to be more white (you can see a slight horizontal line at the bottom) and also on the right side of the display white colour seems to be more brownish.
    I have been wondering if that is acceptable for Thunderbolt monitor? Is that a backlit bleed on white? Can you see anything on the photo I have made or am I going slightly mad?:) Please help.

    The display uses LED technology which means there will be some bleeding or clouding of light on dark backgrounds (mostly from the edges).  You should not have any brown color on the right side as your image shows unless perhaps you need to make some adjustments on your graphics card.  I use mine with a 2012 Mini and it has good colors.

  • Preview prints lose the bottom part of the page

    Yesterday, after doing an update (which only updated iTunes, so it's probably not what caused the problem), I found that all print jobs from Preview (and a few other programs that I've tried) are missing roughly the bottom 1 cm of the page.  I've grovelled through all the settings and preferences that I can find, and I've made various other things change, but no matter what I do, nothing makes the bottom line of text appear on the paper.
    Preview shows all the text, including the bottom line, and when I use the "PDF" button to "Open PDF in Preview", it shows the page with the bottom text.  But when I print the page, the bottom line is blank.
    The printer is remote, controlled by CUPs on a machine down the hall.  When I scp a PDF file to the server and print it there, it prints fine, and the bottom lines are always included. Then when I go back to my Macbook Pro and print exactly the same PDF file on the same printer, the bottom line is again missing.  This shows that it's not a problem with the printer or the server's CUPS software; it's gotta be something on my Macbook Pro that changed.
    The usual disclaimer applies:  I haven't (knowingly ;-) changed any print-related setting recently.  (We've all heard that one before, right? ;-)  Since the problem appeared, I've of course changed lots and lots of settings, trying to find something that affects the problem.  But the most recent change before this problem appeared was a couple of months ago (when another upgrade broke all remote printing, and I had to delete all the printers and reinstall them). 
    A possible clue is that, when I use Safari to load a PDF from http://localhost/..., the page shows as usual, and I get the same drop-down from CMD-P that shows a preview that has the entire page.  But when I print it, the entire page is shifted vertically so that the top title line of text is missing - and the bottom line has only its upper half, with the bottom part of all the characters missing.  Again, the blank strip at the bottom is roughly 1 cm.  Actually, a quick check with a ruler says that it's 12 mm.  But I don't know how to use this info, or how to tell Safari to fix the missing title line.  The missing bottom half of the bottom line seems to say that it's not that the PDF has something wrong that suppresses the text entirely; it would seem to say that somebody is deciding to impose a 12-mm bottom border for some unknown reason.
    Any idea where I should look to fix this problem?  Is there a relevant troubleshooting guide somewhere that I should know about?
    (It sure would be nice to have a known way to say "Just print exactly what's on the Preview page; don't try to do anything clever with it." ;-)

    That doesn't sound quite right.  Tests on the server shows that the printer (HP L7680) can in fact print up to within 3 mm of its edges.  The test pages show this, and assorted tests with "real" PDF pages in the past have verified it.  It worked from my Macbook up to a few days ago, and tests from the server show that the printer hasn't lost the ability to print close to the edges.  In fact, my wife printed a page from her iMac a while ago, and it showed stuff (images and border lines) up to about 4 mm from the edges.  It's only from my Macbook Pro that suddenly the bottom 12 mm gets blanked out. 
    Actually, I did try a test from the server with the "borderless" setting.  The software enlarged the image to be bigger than the page, for some reason that I don't understand, but the result was that the printer printed right up to the very edge of the paper; there was ink visible on the edge of the sheet.    So the idea that the printer "can't" print close to the edge is wrong.  The printer doesn't have a problem here; it's being told by some software on my Macbook Pro to blank out the bottom edge. 
    I just tried another test of this:  I told Preview on the Macbook to print the page at "Scale: 120%  ", and checked "No automatic page scaling".  Preview showed the text going off the page at the top and right edge,  The ink stopped about 3 mm from the top and right edges.  But the bottom 12 mm, including the bottom line of text, was blanked out.  This, plus the tests on the server, shows that the printer can print up to 3 mm from the edge of an 8.5x11 inch page.  And earlier tests that produced the bottom line with only the top half of the characters shows that it isn't just dropping the bottom line; Something on the Macbook is explicitly blanking out the bottom 12 mm (but not doing the same on the top and right edges.
    And whatever is doing it doesn't happen on my wife's iMac; she can print close to the bottom edge.
    I'm now wondering if I should uninstall the printer on the Macbook, and see if I can reinstall it to match the iMac's settings.    But if the problem is something in the Macbooks system libraries that's forcing the 12-mm bottom margin, that probably won't work, either, and the "Letter" paper size settings presumably come from some library file, because it won't permit me to change those numbers.
    Anyway, I'll try your suggestions, probably in the morning, and see what happens.
    About the Borderless type:  I find that when I try setting the Paper Size to "US Letter", it gives me another menu, with "US Letter" and "Borderless 8.5 x 11 in." entries.  If I choose the Borderless, it pops up a window with a warning that this is only allowed for HP Premium Plus Photo Paper, which is in what it's set to.  It says it's "not available when Paper Type is set to Plain Paper", which it won't allow me to do.  (That choice is greyed out.)  It seems odd that it would warn me that it won't work for a setting that it won't let me use anyway, and say that I must use the setting that I am using.  Anyway, I've tried this "Borderless 8.1 x 11 in." setting, and it comes out the same as the "US Letter" choice, with the bottom 12 mm blank.  Both print to nearly the top and right edge if I set the Scale to 120%.
    (And that damned "Automatically rotate each page" is checked again. ;-)

  • Since updating to 3.6.1 I don't get an empty browser window in my tool bar whe. it opens --- just a list of search engines. I can't find anything in "Help" or the FAQ's that seem to address this. My only choice seems to go back to Safari.

    Since updating to 3.6.1 I don’t get an empty browser window in my tool bar when it opens --- just a list of search engines. I can’t find anything in “Help” or the FAQ’s that seem to address this.
    My only choice seems to go back to Safari.

    I am not sure what your problem is, can you give more details.
    One possibility is you may be in full screen mode, for details on fixing that see the [[menu bar is missing]] article.
    If you are missing various toolbar items, see the [[back and forward or other toolbar items are missing]] article.
    If your problem is something else please give more details.

  • I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

    I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Dreamweaver design view doesn't show the bottom part of a long div

    Hi!
    I'm doing a very graphics oriented site, which basically requires me to use a large jpg as a background image and placing text areas against this background     using absolute positioning.
    My problem is that Dreamweaver doesn't show me the bottom part of my content div's background, but renders it as black instead. This obviously makes placing the text areas correctly difficult, since I can't see them against the background.
    If I turn on Live view, then Dreamweaver shows the bottom part correctly. But in live view I can't use rulers and guides (or can I?).
    Is there any setting that I can change so that Dreamweaver is showing me the whole div bg in all situations? One possible cause of this problem might be also that I'm using overflow:scroll on my content. Could that be why Dreamweaver hides the bottom part and can I change that behaviour?
    Any ideas are welcome!

    If we can see the page in question we could probably do this a lot easier.  But all you need to do in your CSS for the background is:
    background: url(pathto/image.jpg) fixed no-repeat;
    If you are trying to absolutely position something in the middle you will be unable to do this without the assistance of javascript to determine the useable pixels on the end-users computer.  Horiztonally is not the issue, but rather vertically because you can achieve horizontal centering by defining a width and setting the margin: 0 auto; in your CSS.
    As far as working with overflows, if there is too much content in them that you believe the overflow will be necessary (assuming min/max-widths are set) you could consider including the content from another document or store it in a database and query the information out.  Then it would make it easier for the client to update the content on their own in the future.

  • HT4059 The last three books I have downloaded at the bottom of the page the bottom parts of y,g,and j are appearing at the top of the next page. Any help or suggestions  will be appreciated.

    This problem just started. On the last line of each page if the letters y,g,p or j appear in the line the bottom part of each of these letters appears at the top of the next page while being chopped off the actual line it should appear in.

    *Update*
    I thought I had found the offending 'app' namely "Songpop."
    I regularly use "Songpop" on my phone late at night via my wifi connection.
    All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
    I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
    I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
    "Songpop" have now responded that "This is an issue to take up with Apple Support"  see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
    Hopefully someone at Apple can respond ....

  • My picture files open up off center so I cannot see all of the bottom part of the picture.

    Hi,
    My picture files open up off center so I cannot see all of the bottom part of the picture. The ruler across the top read "0" to 13.5". Down the left side of the picture the ruler reads 3", 2",1", 0, 1", 2",3" etc. This leaves a three inch empty space at the top of my viewing area and I lose three inches of the bottom of my picture. I cannot figure out how to adjust this. I have tried the screen modes  and they do not fix my problem.  What can I do to solve this problem?

    Please provide sensible details about your platform, exact version of your OS, exact version of Photoshop, complete details baout your setup, hardware details, monitor resolution, etc.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How do you change the background colour of the bottom part of calendar on iPhoto

    I have created a few calendars and photo books from iPhoto, but can't seem to find how to change the background colour of the bottom part of the calendar (where you write) to match the top part where you insert the photos.  Consequently you end up with a mismatch which doesn't look as good.  I can't believe that apple have not considered this since here are about 5 or 6 colours to choose from on the top section.  I am not running the latest version of iPhoto (which is 11 I think) as I'm not on Lion- is this significant??

    Some theme will let you change the color of both pages. The travel themes, Vintage, Seasons, Kids, Colored Paper, Modern Lines, Classic (only the border around the date area), With the Big Date theme you can change the background on both pages.
    Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
    OT

Maybe you are looking for

  • External 3rd party USB DVD drive will not show up on my 2008 Macbook pro

    I have a the new Macbook pro, when I connect my Liteon USB DVD drive it does not show up my Macbook pro. The only DVD drive showing up is the one on my Macbook pro. How do I make the 2nd DVD drive show up. I just need to 2nd drive to tranfers data fr

  • How can I burn more than 7 of the same playlists?

    Burning just 7 playlists seems arbitrary. No one in their right mind would use this method to pirate music. I am making Christmas gifts for friends. Is there a way around this limitation?

  • Deploying exploded archives?

    Hi,           I am doing J2EE/Struts/EJB Development on Weblogic 8.1.           Have an EAR file with WAR file and bunch of EJB JARs inside that EAR.           I need to do a lot of changes and additions to the GUI,           which is mostly JSPs ins

  • Will X-FI be available as a PCIXpress ca

    Am just about to buy a new motherboard, but these new PCIXpress boards don't feature a lot of PCI slots anymore. I'm currently using a Audigy2 ZS PPRO card and am expecting to upgrade to your new X-FI based cards. If these will be availabke in PCIXpr

  • How to import files to picture folder instead of iphoto?

    Right now, all of my pictures import into iphoto when I insert my camera card. I really want them to import into the folder I have created for photos. Can someone help?