Sum after field change

Does any one know how to sum a column upon the field change of another column? For instance; a construction estimate is dividedinto, say 50 divisions (categories). Each entry into my general ledger, a numbers spread sheet, has a column for, Job, and division. To bill a job I would filter by job name, then sort the division column, accending. I would then right click, and sum after field change. In this way I would have the sum of each divisions costs to date, and compare it with the original estimate. The new numbers update does not seem to have this feature, (sum after field change). Does anyone know how to accomplish this, perhaps with sum if?

Numbers seems to perform calculations when any dependencies are changed. so entering a new number should cause a sum to update.
try this as an experiment:
in a small table make the last row a footer row then in footer of column A enter the formula:
=sum(A)
like this:
now enter values in the column:

Similar Messages

PR Field change after release completion

Hi,
We have a PR release strategy with Doc type and $ as 2 charesterestics. I have assigned X - Block and 2- RFQ/purchase order as release Indicators. 2 - has FZ01 and "Blank" as changeabil.
The question is, User want to lock "Cost Center" field in accoun assignment tab. Or they want to reverse release strategy in case of "Cost Center" change.
There is no field in FZ01 to control.(We does not have any WorkFlow)
Any idea will be appreciated.
Thanks in advance,
Vamsi.

Hi
Create a release indicator with the released for PO, RFQ checked and changeability as 1=cannot be changed and assign it to ur release strategy after rlease.
If u want a new release strategy after costcenter change then cost centre should be one of the characteristics it the release strategy.
The first option would be the best one for you.
Check and revert
Reg
Raja

Sum calculated field in report

Hi, I have a report that groups by employee then by machine. In this report I sum several fields, but need to sum a calculated field and can't figure it out. This is the calculation:
<?( QTY_MOVED) div ( TIME +.001 ) div ( INVERSE + .001)?>
This is a total field using a field that works fine.
<?sum(current-group()/QTY_REJ)?>
How do I incorporate the calculation in the <?sum(current-group()/.............I get errors if I just put in the calculation above.
thanks!

Thank you for your help. After taking your advice and getting it to work by messing around with the brackets, management has changed their mind on the calc. Now they want me to use this calculation:
SELECT EMPLOYEE, SUM(QTY_MOVED), SUM(QTY_REJ), SUM(TIME), (nvl([b]sum(QTY_MOVED),0)/nvl(sum(TIME),0))/nvl(sum(INVERSE),0) eff ,'DIRECT'
FROM VW_TIMETRACK
WHERE START_DATE >= :BEGIN
AND START_DATE <= :END
AND WORK_ORDER <> ' '
GROUP BY EMPLOYEE
to get the average. Now the weird thing is, I can get the value in toad, and I can get it to output in raw xml data, but when I try to add the eff field right next to the sum(time) field in the word form, nothing shows up. Absolutely no data. But it is in the xml. I'm using <?sum(current-group()/EFF)?> , just like I am for <?sum(current-group()/TIME)?> . I've made it text, numeric, decimal. Nothing is coming out.

How to know when the PRICE AFTER DISCOUNT changed and get the value

Hi,
Everything I do to see if a value changed in the grid works except for PRICE AFTER DISCOUNT
which seems to be inaccessible.
Any idea how to know when exactly this value changed and do actions accordinly ?
Also I always get 0.00 if I try to get the value of it
This works to get in the condition of a vlaue changing but I always get 0.00 as the value of the column
if (pVal.ItemUID == "38" && pVal.ColUID == COL_DISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_DISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
    catch (Exception ex)
        SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");
And this do not even get into the condition even tought I SEE the column PRICE AFTER DISCOUNT:
if (pVal.ItemUID == "38" && pVal.ColUID == COL_PRICEAFTERDISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_PRICEAFTERDISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Price after discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
     catch (Exception ex)
         SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");

just idea, maybe it will works
Create one udf in row level and set there FS based on changes on price after discount and fill value what is in price after discount. Then the validation make on this field instead of standard SAP field.

How to deal with table.Field/sum(table.Field) BIEE

Ｉ　ｈａｖｅ　ａ　ｑｕｅｓｔｉｏｎ　ｗｉｔｈ　ｔｈｉｓ　table.Field/sum(table.Field)，　
ａｎｄ　ａｎｏｔｈｅｒ　ｃａｓｅ　ｉｓ：　ｏｎｅ　ｆｉｅｌｄ　ｏｆ　ｔａｂｌｅ　／ａｎｏｔｈｅｒ　ｆｉｅｌｄ　ｏｆ　ａ　ｔａｂｌｅ，　ｂｕｔ　ｔｈｅｓｅ　ｔｗｏ　ｔａｂｌｅｓ　ｎｏｔ　ｄｉｒｅｃｔｌｙ　ｒｅｌａｔｉｏｎ，　ｓｕｃｈ　ａｓ：　ｏｎｅ　ｄａｙ　ｓａｌｅｓ（ｏｎｅ　ｔａｂｌｅ）／ｔｈｅ　ｌａｓｔ　ｄａｙ　ｓａｌｅｓ（ａｎｏｔｈｅｒ　ｔａｂｌｅ）

The way to go is hierarchical field names, as it has been said.
What would give you more flexibility, would be to give your element page's fields logical names. This would lead to building blocks, which can be freely combined. Any logic within the building blocks would not change at all, and logic going beyond a block would be straightforward to set up.
Hope this can help.
Max Wyss.

Field changes on Contract Account change(CAA2).

Hi guys,
I am using BDT to add an checkbox on the Contract Account -> General Data ->
Account management data, and I want to save the change log of this field (checkbox), so after the user changed it, the user can see the change logs by clicking Extras->Field changes on the menu.
Thx in advance, points will be rewarded.
Vincent.

you can control break statement is of at new and print that description what ever you want and end with endat.
thanking you

Material bapi custom field change to be logged in change document

Hello all,
I have just added a custom field to MARA table (materials), and updated it successfully via BAPI_MATERIAL_SAVEDATA.
I would like now to log changes via change documents but problem : after having changed value from "A" to "B" for example, I don't see the changes (to do this, I call function CHANGEDOCUMENT_READ with parameter OBJECTCLASS = "MATERIAL" and get results from returned EDITPOS parameter).
What is surprising me is that I can see changes of other standard and custom fields (this was done by other people in my company 2 years before but I don't have any trace what they did).
Do you have any idea what customizing need to be changed or what else need to be done, to log changes of new custom fields into change documents?
Thanks a lot.
sandra

In this transaction, there is nothing related to fields; there are only objects (like MATERIAL) and tables (like MARA).
I can't see anything which makes the difference between our 2 custom fields MARA-ZZCOLLANA (which is logged in change documents) and MARA-ZZSSCOLL (which is not logged in change documents).
For info, my SAP version is R/3 46C.

Date Track fields - changes

I have a question regarding the date tracked fields in HRMS.
If I want to know what changes are made for a person record, How do I know that?
The changes may be anything like position, salary, job, grade, marital status.
How can I know the old value and the new value after the change?

if you are modifying any assignment record an additional record will be created in the table per_all_assignments_f for the same assignment id.
Example if the assignment is updated 3 times you can see 3 records created for the same assignment
Thanks
Regards
Ramesh Kumar S

Can i sum time fields?? (i expect that yes....)

Hi everybody.
I'm a visual basic programmer, actually, visual studio 2005, now i beginning with crystal report for visual studio 2005, nice and easy to use with the wizard, but,,, if i want to do something i little bit complex i can't find a manual for beginners.
Now Iu2019m trying to do a report that list fields from a typed dataset, that dataset contains same datetime fields i.e. 1:30 , I put that fields in the details region, all it's ok, but the problem became when i try to sum all the times and totalize then. The reason (i supposed) it's that the4 crystal can't sum time fields.
Thinking about this, i suppose that i can do something with code but i can't find nothing about this, Can anybody tell me where is a manual to code in crystal report?
Well, if somebody have any idea please tell me.

The Crystal syntax doesn't change much from version to version so you can look at our SDK Guide on Diamond.
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_net_doc/doc/crsdk_net_doc/html/crconformulareference.htm
If you really want to formula reference for Crystal Reports for Visual Studio .NET 2005 you can look here [http://msdn.microsoft.com/en-us/library/ms225334(VS.80).aspx|http://msdn.microsoft.com/en-us/library/ms225334(VS.80).aspx].
Edited by: David Hilton on Sep 29, 2008 4:47 PM
Edited by: David Hilton on Sep 29, 2008 4:48 PM

Problem in sum a field through select command

Dear Sir(s),
I want to sum kbetr (no. of packing) for same knumv(invoice no.) in table konv.
e.g.
invoice no. no. of packing
(knumv) (kbetr)
001 2
001 3
002 4
002 5
result should be -
invoice no no. of packing
001 5
002 9
code-
select knumv kschl sum(distinct kbetr)
from konv
into table it_konv
for all entries in it_vbrk
where kschl = 'ZFQT'
and knumv = it_vbrk-knumv
group by knumv kbetr.
error showing - unkown col. sum(distinct field list.
Please help me immediately.
thanks,
R.Kapoor

Hi..
Change ur Select statement as below .
select knumv sum(kbetr)
from konv
into table it_konv
for all entries in it_vbrk
where kschl = 'ZFQT'
and knumv = it_vbrk-knumv
group by knumv .
Here you need not to Retrieve the Field KSCHL since it is anyway given in the WHERE clause.
Let me know incase of any other issue.
Reward if Helpful.

Value of the input field changing automatically on click of enter

I was trying to write a simple report that has a single input field with a f4 help for a directory browser attached. the input field can only be filled using the f4 help ( achieved through function module DYNP_VALUES_UPDATE) . The problem is after the input field is populatd if i click on enter or press f8 the text in the input field changes automatically. Please can anyone find the reason for this behaviour and provide a solution .Thanks in advance.report code attached.
Regards,
Kiran A.
REPORT zpgm_md61_error1.
PARAMETERS: p_file TYPE string MODIF ID abc LOWER CASE .
DATA: dyname TYPE programm,
      dynumb TYPE sy-dynnr.
DATA: dynpfields TYPE TABLE OF dynpread WITH HEADER LINE.
DATA: lv_folder TYPE string,
      sel_folder TYPE string.
AT SELECTION-SCREEN OUTPUT.
PERFORM disable.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>directory_browse
    EXPORTING
      initial_folder       = lv_folder
    CHANGING
      selected_folder      = sel_folder
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
dynpfields-fieldname = 'P_FILE'.
MOVE sel_folder TO dynpfields-fieldvalue.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = dyname
      dynumb     = dynumb
    TABLES
      dynpfields = dynpfields.
FORM disable.
LOOP AT SCREEN.
    IF screen-group1 = 'ABC'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDFORM.                    "dISABLE

Hello Kiran,
This is because you've defined the field as TYPE STRING.
Change the declaration & the problem should be solved:
PARAMETERS: p_file TYPE dynfieldvalue MODIF ID abc LOWER CASE .
BR,
Suhas

Certain scheduled tasks do not run anymore after DST change

Hi everyone,
I noticed a problem on Server 2012 after daylight savings time was set effective last weekend in March. All scheduled tasks that are configured to run weekly on Monday through Friday don't run anymore! Tasks that are configured to run daily are OK. Shall
I really put a wrapper script around the executable to check the weekday myself??? Another solution to work around this bug seems to be to set the start day after DST change day, then the weekly Jobs also run OK again.
Many Greetings
Michael

We have experienced the same issues. Just to put some more information out there (and confirm some points from above):
We run 12 scheduled tasks on 2 servers.
Machines are "Microsoft Windows Server 2012 Standard", ver. 6.2.9200 build 9200, HP ProLiant BL460c Gen8
4 scheduled tasks did fine over the DST switch in March
8 scheduled tasks failed to run
All scheduled tasks that ran were set up with
“Configure For” = “Windows Server 2012”
All scheduled tasks that failed were set up with
“Configure For” = “Windows Vista™, Windows Server™
2008”.
All scheduled tasks, both affected and unaffected, were scheduled as Weekly, Mon-Fri.
Changing the "Configure For" field after the tasks failed to run did NOT fix the problem.
Changing the time of a task after the task failed to run did NOT fix the problem
Changing the "Start" date of a task after it failed to run DID fix the problem.
Given that there are not a whole ton more complaints out on the web about this bug, it must be that the bug does not affect every instance of the scheduler on Windows Server 2012. In other words, it must be only some particular configuration
of Windows Server 2012 that causes this bug, otherwise surely there would be many many more complaints. Can people who are experiencing this bug check and post configuration info so perhaps we can determine a common factor? Thanks.

Do I need to recreate the View when the underlying field changes?

Re: Do I need to recreate the View when the underlying field changes?
I did an ALTER TABLE1 to change FIELD1 from varchar(5) to varchar(7). TABLE1.FIELD1 is in VIEW1. When I do a SELECT * FROM VIEW1 it shows 7 characters. But when I look at VIEW1 in object explorer (after refreshing), FIELD1 is varchar(5). Do I care?
Should I recreate the VIEW1?

If you have refreshed using sp_refreshview stored procedure then you are good, if not then here you go...
The metadata for the view is not automatically updated when the tables are modified.
The fix is to either drop and re-create or alter the view or to use the sp_refreshview stored procedure.
Example :
EXEC sp_RefreshView View_Tablename
GO
http://msdn.microsoft.com/en-us/library/ms187821.aspx
Raju Rasagounder Sr MSSQL DBA

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

Admin permanent status gone after password change

Hi everyone.
a couple of days ago i decided to change my password as good safety measure. changed as usual, only getting a message about keychain and a possible need to do the change in it after unlocking. seemed pretty standard to me, don't know if it is. (6 month mac user...)
however, for some strange reason, afterwards the change, even if i am still an admin in the user accounts i have to identify myself with pass every time i need to do some change in admin areas, as changing the apps in the apps folder.
i seem to be working as a standard guest , needing to elevate my status every time i need to something standard as changing my apps or renaming them.
i've tried correcti the permissions in the disk utility and also tried to repair my keychain, without great sucess.
anyone knows how can i get my permanent admin status again? it's a pain to need to type a password every time i want to drag and drop an app!
Filevault is active on my home folder.
thanks for your help
filipe

Macbook-de-Filipe:Applications filipe$ ls -aldeO /Applications/scilab-5.1.1.app
drwxr-xr-x@ 3 filipe wheel - 102 17 Abr 20:42 /Applications/scilab-5.1.1.app
for example this one. an app in Apps folder i wanted to update
i didn't changed app folder permissions before. i believe all this weird behaviour appeared after i changed my password.is there a system log i can see?
i was cheking the app folder permissions and is :
system : read and write
wheel : read
everyone: read
i haven't changed them before but i have found that if i had a admin group with read and write permissions i can have back my standard usage. however i don't know the implications of this and don't like treating the symptom, prefer instead to treat the cause
thanks for your help V.K.

Sum after field change

Similar Messages

Maybe you are looking for