=SUM(IIF(Fields!OPTION_CODE.Value="M","0",Fields!COST.Value * Fields!TOTAL_UNITS.Value )) =IIF(Fields!OPTION_CODE.Value="P","0",SUM(Fields!COST.Value * Fields!TOTAL_UNITS.Value )) =SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields

in this i want to calculate only Option code 'M' Amount in gross total.BUT MY Gross total calculating M and P Amount. option code P value should visible but not to add.
please any body help me to writing any function
=SUM(IIF(Fields!OPTION_CODE.Value="M","0",Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
iam writing like below its showing error
=SUM(IIF(Fields!OPTION_CODE.Value="M","0",Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
=IIF(Fields!OPTION_CODE.Value="P","0",SUM(Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
=SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields!TOTAL_UNITS.Value), CDbl(0,0)

Hi Pullela venu,
I have checked the expression and found that you have incude the string "0" in the SUM function which will cause the error, please remove the "" of the value 0 as below to have a test:
=SUM(IIF(Fields!OPTION_CODE.Value="M",0,Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
=IIF(Fields!OPTION_CODE.Value="P",0,SUM(Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
For the last expression as below is not correct, CDBL function format is CDBL(expression):
=SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields!TOTAL_UNITS.Value), CDbl(0,0)
Modify as below:
=SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields!TOTAL_UNITS.Value), CDbl(0.0) )
If the problem still exists, please provide the error message if the expression throw any error.
Any problem, please feel free to ask.
Regards
Vicky Liu

Similar Messages

Combining Multiple occurrencesof the same field value into one and Sum prob

Hi
I am trying to combine the multiple occurrences of the field values and sum the amount to the target
Source
<Record>
<Item>
<Item1>1</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>5</Amount1>
<Amount2>5</Amount2>
</Item>
<Item>
<Item1>1</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>15</Amount1>
<Amount2>15</Amount2>
</Item>
<Item>
<Item1>1</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>5</Amount1>
<Amount2>5</Amount2>
</Item>
</Record>
Target
<Record>
<Item>
<Item1>1</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>25</Amount1>
<Amount2>25</Amount2>
</Item>
</Record>
I am using MM at present. All fields are KeyFields here. Should check against each other.
I followed Context setting to the Root Item and Sort, SplitByValue and CollapseContext to achieve the functionality.
But it checks against each field and not all fields. So either one field has different value, only that perticular field gets into New Node and not the entire record. In this case, i might need UDF i guess. Any UDF help is much appreciated
Bad Target example of what i am getting
Source
<Record>
<Item>
<Item1>1</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>5</Amount1>
<Amount2>5</Amount2>
</Item>
<Item>
<Item1>1</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>15</Amount1>
<Amount2>15</Amount2>
</Item>
<Item>
<Item1>2</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>5</Amount1>
<Amount2>5</Amount2>
</Item>
</Record>
Target
<Record>
<Item>
<Item1>1</item1>
<item2>2</item2>
<item3>3</item3>
<item4>4</item4>
<Amount1>25</Amount1>
<Amount2>25</Amount2>
</Item>
<Item>
<Item1>2</Item1>
</Item>
</Record>
In the above scneario, only Item1 returns the value into different node. But i like to have entire node values into the record, if one value changes in the entire record.
Appreciate your help with the UDF in advance
</Record>

I think you are looking for string aggregation.
The following are the replies posted by me in the forum recently on the same case.
they might help you.
Re: Concatenating multiple rows in a table - Very urgent - pls help
Re: Doubt in a query ( Urgent )
Re: How to remove words which consist of max 2 letters?
Re: output like Name1,Name2,Name3...

Impact of Addition of New Value Fields in the existing Op. Concern-COPA

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669
Ohter details are as follows...
VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields)
1)     The client requires three new value fields to be created. Value fields for :
-     Other Airport Charges - International
-     Cargo Commission Cost
-     Personal Cost (Direct)
2)     What are the Steps involved in creation of new value fields? The steps are :
1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
4)     If yes then, Do I need to perform additional configuration or can I proceed to transport it to Production?
5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
6)     What are the different methods of cost and revenue allocations in SAP?
7)     I have checked the status of the value fields across clients, It is as followsu2026
     Value Field     Value Field For     Description     Development      Quality     Production
1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
#DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.

How to prevent a number field from getting summed?

I want to display the # of clients per a certain ID number. (In order to show the duplicate records by setting a filter in the # of clients field). However, this works if the ID number is a text field... but it doesn't work if the ID number is a metric of client... or number. It gets summed up, I get the total, and the % of clients turns to be 1.
Any ideas?
Thanks

Example:
I have 3 clients:
Column A
55
55
44
21
I want the following output:
55 | 2
I get the desired result by adding a second column (# of clients) and creating a filter to get results only if the value is > 2.
The problem is when "Column A" is a number field. If it is a number field, I get total sum of the records (55+55+44+21) and a value of "1" if I add the # of clients column.
Is it clearer now? ideas?

How to Check the total value of a field

Hi,
I want to check the total value of a field (this total is obtain by using property of that field thru personalization).
that means , in a table 3 columns are there (col 1, col2 & col3). I personalized the total property as true for col3.
now i'm getting the total for that field.
I want to check that total whether it crossed 100 or not.
How to do this?
Thanks in advance,
SAN

Hi San,
You can achieve by using OATotalRowBean, search for OATotalRowBean in this forum you should be able to get some sample code.
public class OATotalRowBean
extends TotalRowBean
implements OAWebBean, OAWebBeanConstants
A special row rendered at the bottom of a table which lets users see totals for columns which are designated for summing.
Note The total is calculated and displayed only for visible rows.
When you indicate that you want to total one or more columns, the OA Framework creates an OATotalRowBean and designates it as the columnFooter named child of the OATableBean. If the OATableBean is also configured to insert rows (so it has an "Add Another Row" button), then the total bean becomes an indexed child of the add table row bean (see OAAddTableRowBean), which the OA Framework in turn designates as the table's columnFooter object.
If you need to access the table's column footer object for any reason, call the OATableBean's getColumnFooter() method. If row insertions are enabled, this method returns an OAAddTableRowBean; otherwise it returns an OATableRowBean.
For detailed information about creating and working with tables, see OA Framework Developer Guide: Tables.
With regards,
Kali.
OSSi.

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

I think it has something to do with the way the value of the check box is exported, but I'm not sure. With nothing being exported to Data5, Data6 displays the sum of Data1-4 rounded down to the nearest whole number and updates automatically as Data1-4 are updated.
Right now, assuming Data1-4 are 0, where data 5 is the output of the second example and any box is checked, "1" is displayed in data5 but nothing is added to data 6. Selecting any other check box or deselecting that check box will cause data6 to add 1 even if data5 displays "0". By way of example:
Selecting Check box 16 results in Data5 displays 1 and Data6 displays zero.
Then, if any or all of Checkbox17-20 are selected, Data5 displays 1 and Data6 displays 1.
Then, if any or all of Checkbox17-20 are deselected, Data5 Displays 1 and Data6 displays1.
Then, if Checkbox16 is deselected, Data5 displays 0 and Data6 displays 1.

Sum calculated field in report

Hi, I have a report that groups by employee then by machine. In this report I sum several fields, but need to sum a calculated field and can't figure it out. This is the calculation:
<?( QTY_MOVED) div ( TIME +.001 ) div ( INVERSE + .001)?>
This is a total field using a field that works fine.
<?sum(current-group()/QTY_REJ)?>
How do I incorporate the calculation in the <?sum(current-group()/.............I get errors if I just put in the calculation above.
thanks!

Thank you for your help. After taking your advice and getting it to work by messing around with the brackets, management has changed their mind on the calc. Now they want me to use this calculation:
SELECT EMPLOYEE, SUM(QTY_MOVED), SUM(QTY_REJ), SUM(TIME), (nvl([b]sum(QTY_MOVED),0)/nvl(sum(TIME),0))/nvl(sum(INVERSE),0) eff ,'DIRECT'
FROM VW_TIMETRACK
WHERE START_DATE >= :BEGIN
AND START_DATE <= :END
AND WORK_ORDER <> ' '
GROUP BY EMPLOYEE
to get the average. Now the weird thing is, I can get the value in toad, and I can get it to output in raw xml data, but when I try to add the eff field right next to the sum(time) field in the word form, nothing shows up. Absolutely no data. But it is in the xml. I'm using <?sum(current-group()/EFF)?> , just like I am for <?sum(current-group()/TIME)?> . I've made it text, numeric, decimal. Nothing is coming out.

Getting run time value on form field by sql query and function

Hi All,
we have below requirement -
create a form with fields as below -
KRA_Type Grade Weightage Start Date End date
Functinal E2 30 1-Jan-2010 1-jan-2011
Organizational E2 70 1-jan-2010 1-jan-2011
lov of kra_type has 2 values (Functinal, Organizational). requirement is to validate Weightage field such that for same grade :- Fuctional Weightage + Organizational Weightage = 100.
please suggest on how to approch this.
Thanks,
Sam D

this is not related to FORMS at all......
1) create a database function which take grade parameter and return the total weightage.
2) use it on when-validate-item trigger to validate
create or replace function get_grade_weightage(p_grade varchar2)
return number
is
v_grade number;
begin
select sum(Weightage)
   into v_weightage
from mytable
where grade = p_grade;
exception when no_data_found then
   return 0;
end;
select get_grade_weightage(:grade) into v_weigtage from dual;
if :current_weigth < v_weightage then
    -- do something
else
--do something
end if;Hope it helps
plz mark the answer as correct or helpful if it is

Total using SUM not working on Account field on Lead History report

Hi,
I have a report based on Lead History on which I need to use the SUM of a field that is under the Account.Custom Number/Integer. This basically is a report of leads along with some fields from the account the lead is associated with. The SUM on that field works fine when I try it on another report off the Account History object but does not work when used on the report off the Lead History. It just shows the value of the field for that record instead of the total of the field for all the records displayed on the report. I am guessing that the issue has to do with the query going off the Lead-Account relationship because of which it treats each relationship as one resultset and totals the field values for just that relationship.
Any ideas on how to accomplish this would help very much. Can a field on one report be referred from another to achieve this?
Thanks in advance for your help!
Regards,
Madhukar

Hi again
Just checked a similar report test I did a while ago, and my query is:
SELECT c001 MyText, TO_NUMBER(c002) MyNumber
FROM HTMLDB_COLLECTIONS
WHERE COLLECTION_NAME = 'ATD'
So, you should use TO_NUMBER(c002)
Andy

How to limit date fields between 2 values

Hi I have two date fields and I can use min and max to limit them between two values. But what I wanna do is make it so that the user can only insert values before June 30th each year. So if a value is over that it gives an error. Right now I can do it but would have to change the year each year because I specify it as
Min june 30th 2011
Max june 30th 2012
I want this but so I don't have to change it to 2013 in a year.
Thanks and best regards

The validator should only allow dates in the range between June 30th this year and July 1st of next year. But with next year defined as current year + 1 year, not as a straight number which would have to be changed every year.
Does this make sense?
Here is a little background I have a vacations table and in it fields user, start, end, and ID. Now Start and End are the date fields. I have this query which gives a number of vacation days a user has spent excluding saturday and sunday. Now the problem in this query is that when the user inserts his vacation dates he can insert them for 10 years from now which messes with the query. So I was thinking if there was a way to limit the user to only be able to insert dates for the given business year which in my company (for some reason) goes from July 1st. That is the cut off date.
In other words in my company you have to use your vacation days by july 1st. Then you get the vacation days for next year which you can again use, until July 1st of next year. If you haven't used last year's vacation days by then you lose them. I just want to somehow incorporate this into the application.
Here is the sql query (and props to user Pollywog)
WITH t AS ( SELECT id,
                    MAX (strt) strt,
                    MAX (finish) finish,
                    SUM (dys) days_off
               FROM (SELECT id,
                            strt,
                            finish,
                            CASE
                               WHEN TO_CHAR (dy, 'day') LIKE 'saturday%' THEN 0
                               WHEN TO_CHAR (dy, 'day') LIKE 'sunday%' THEN 0
                               ELSE 1
                            END
                               dys
                       FROM vacations
                     MODEL
                        PARTITION BY (ID id)
                        DIMENSION BY (0 d)
                        MEASURES (POCETAK strt, KRAJ finish, POCETAK dy)
                        RULES
                           (dy [FOR d FROM 1 TO finish[0] - strt[0] INCREMENT 1] =
                                 (NVL (dy[CV () - 1], dy[CV ()]) + 1)))
           GROUP BY id
           ORDER BY id)
SELECT t.id,
       t.strt,
       t.finish,
       t.days_off,
       vacations.korisnik,
       SUM (
          CASE
             WHEN finish < TO_DATE ('01/07/2011', 'dd/mm/yyyy') THEN days_off
             ELSE 0
          END)
       OVER (PARTITION BY vacations.korisnik ORDER BY t.id)
          this_years_running_total,
       SUM (
          CASE
             WHEN finish < TO_DATE ('01/07/2011', 'dd/mm/yyyy') THEN days_off
             ELSE 0
          END)
       OVER (PARTITION BY vacations.korisnik)
          this_years_grand_total,
       SUM (
          CASE
             WHEN finish >= TO_DATE ('01/07/2011', 'dd/mm/yyyy')
             THEN
                days_off
             ELSE
                0
          END)
       OVER (PARTITION BY vacations.korisnik ORDER BY t.id)
          next_years_running_total,
       SUM (
          CASE
             WHEN finish >= TO_DATE ('01/07/2011', 'dd/mm/yyyy')
             THEN
                days_off
             ELSE
                0
          END)
       OVER (PARTITION BY vacations.korisnik)
          next_years_grand_total
FROM t, vacations
WHERE t.id = vacations.idEdited by: Dino2dy on Jun 6, 2011 5:44 AM

Sum of field

Hi Everybody,
   Can we sum a field in Layout(SAPScript) itself.
   Although it can be calculated in Print Program and sent to Layout but if it can be done in Layout itself then nothing like that.
   Thanks in advance.
Regards,
Deva Jyothi Singh

Hi,
Please try this(from SAP help),
The SUMMING command is used for accumulating a total value for a program symbol. The command should be specified just once. Then, each time the specified program symbol is formatted, its current value is added into the total symbol. Several program symbols may all be added into a single total symbol.
Syntax:
/: SUMMING program_symbol INTO total_symbol
SAPscript cannot create the field for the total dynamically. The summing symbol used for totalling must be declared with TABLES in the ABAP program. Otherwise, only zero is added. Declaring the symbol with the DATA statement is not sufficient (global data).
Thanks
Vinod

New Value Field

Dear Friends,
We are planning to add new value field in current copa structure, for this I need know :
1. As soon as we add new value field current operation conern gets deactivated ?
2. If there is only one server for development and production then as soon as we create value filed in development, what would be the impcat in production client ?
3. If server is same than transport of value field is required ?
4. If required then opernation concern shuld be re-generate after transport ?
5. If server is same then operating concern has to be regenerated in every client ? i.e. dev, testing, preprod, prod.
and what ever impact would be in this case and also if we have different server for dev nad product. Kindly let me know about you expert comment.
If there is any risk while regenerate operating concern, also please let me know.
Thanks
Ravi

Hi,
Activation of Operating concern has two aspects- Cross client and client specific... for your questions.. if you have operating concern in the same server it is enough if you activate only client specific one..
On each change of u r datastructure i.e changes to characteristics and value fields u need to generate.. till then it will be in Inactive mode..
In terms of different systems generally u can transfer the active operating concern on addition of new value field. However sometimes it may be required to activate specifically..
Regards
Sudhakar Reddy

Unable to default DFF segment based on selection of other field value.

Hi Gurus,
*I have a requirement on 'Create Work Request' page (Oracle EAM), where during creating complaint, when user selects Asset Number, based on this selection, a DFF enabled to capture Tenant Info must be populated. [For testing now, I'm writing my code in PR and not in PFR to populate some thing while page loads.]*
I have extended my CO and tried many ways (from simple to little complex) but to no success.
Simpler way:
*=======*
OAApplicationModule am = oapagecontext.getApplicationModule(oawebbean);
OAViewObject vo = (OAViewObject)am.findViewObject("RequestDetailsVO");
Row row = vo.first();
row.setAttribute("Attribute1","Attribute1"); //Attribute1 is the View attribute in above VO. But this doesn't work.
row.setAttribute("DepartmentCode","CRC MAINT"); //DepartmentCode is a view attribute as well. And this works.
This code doesn't work.
Understanding that, DFF segments can't be set as simple bean, I have done below:
*===================================================*
OADescriptiveFlexBean oadescriptiveflexbean = (OADescriptiveFlexBean)oawebbean.findIndexedChildRecursive("WorkRequestDesc");//("WorkRequestDFF_p13n");
oadescriptiveflexbean.processFlex(oapagecontext);
if (oadescriptiveflexbean != null){
ContextMap contextmap = oadescriptiveflexbean.getNamedChildMap();
if(contextmap != null){
Enumeration enumeration = contextmap.keys(oapagecontext.getRenderingContext());
if(enumeration != null){
do
if(!enumeration.hasMoreElements())
break;
Object obj = enumeration.nextElement();
OAWebBean oawebbean1 = (OAWebBean)contextmap.get(oapagecontext.getRenderingContext(), obj);
oapagecontext.getParameter("WorkRequestDesc1")
//String str = (String)oapagecontext.getNamedDataObject("WorkRequestDesc1")
if(oawebbean1 != null)
if(oawebbean1 instanceof OAMessageTextInputBean)
OAMessageTextInputBean oamessagetextinputbean = (OAMessageTextInputBean)oawebbean1;//.findIndexedChildRecursive("WorkRequestDesc1__xc_");
//oamessagetextinputbean.setReadOnly(true);
oamessagetextinputbean.setText("Jawad");
} while(true);
Now the issue with above code is, during the page load, all the segments are populated with value 'Jawad'. I want to populate only the first segment.
More info:
*======*
VO: RequestDetailsVO
DFF Regions ID: WorkRequestDesc
Attribute1 (DFF segment1) ID: WorkRequestDesc1
Appreciate your responses,
Jawad

Dear Guys,
I found out a workaround for this case (If this helps others): :)
*1. Create a Message Text Input type field (representing each DFF segment) and map them to View Attribute (over which DFF was created) and VO instance.*
*2. In the extended CO, in PFR, get the handle of these created fields.*
*3. Set the values as required.*
Since these fields are mapped onto the same view attributes as DFF was, the data goes in fine.
But I still am hunting for the possibility of setting a single segment.
Thanks and Regards,
Jawad
Edited by: Jawad on Apr 19, 2012 3:36 AM
Edited by: Jawad on Apr 19, 2012 3:38 AM

How to get the table of value field? and can we expand the technical limits

Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!

how to extend the limit of value numbers? please see the original question.

BADI /SAPAPO/AM_ALERTLIST - How to fill values in new field catalogue

Hi,
I need some help for passing values into the field Catalog of an ALERT Monitor.
The requirement is to add new fields in the ALERT Monitor and then populate them with values form the PRODUCT view.
I have implemented method MODIFY_ALERTLIST of BADI /SAPAPO/AM_ALERTLIST. I am able to add the new columns but I am unable to add the values. Actually while debugging i found that even though the NEW values are going into the table T_ALERTS, but the space between the New Added values and the original value is HUGE. Therefore when the Field Catalog is displayed in the Alert Monitor, the NEW Values are not shown.
I am attaching my Code
DATA: l_table_ref TYPE REF TO data,
l_table_ref_1 TYPE REF TO data,
l_fieldcat_str TYPE /sapapo/am_aot_fieldcat_str,
ls_fieldcat TYPE LINE OF lvc_t_fcat,
ls_t_fieldcat LIKE LINE OF t_fieldcat,
l_alert_str TYPE LINE OF /sapapo/alert_tab,
l_str_ref TYPE REF TO data,
l_str_ref_1 TYPE REF TO data.
FIELD-SYMBOLS: <aot_tab> TYPE STANDARD TABLE,
<aot_tab_1> TYPE STANDARD TABLE,
<alert_str> TYPE /sapapo/alert_str,
<aot_str> TYPE ANY,
<alert_str1> TYPE c,
<alert_str_uc> TYPE c.
FIELD-SYMBOLS: <zat103> TYPE c. "ANY.
DATA : l_col_pos TYPE i,
gv_entries TYPE i,
xlength TYPE i.
FIELD-SYMBOLS : <info> TYPE ANY,
                  <aot_str1> TYPE ANY.
DATA olen1 TYPE i.
DATA: t_pegid TYPE STANDARD TABLE OF /sapapo/amopegid_tab,
        t_ordid TYPE STANDARD TABLE OF /sapapo/amoordid_tab.
CLEAR: l_alert_str,
    l_table_ref ,
    l_table_ref_1 ,
    l_fieldcat_str ,
    ls_fieldcat ,
    ls_t_fieldcat ,
    l_str_ref .
*Add new column
READ TABLE t_fieldcat INTO ls_t_fieldcat INDEX 1.
DATA: x1 TYPE lvc_t_fcat,
       y1 LIKE LINE OF x1.
x1 = ls_t_fieldcat-fieldcat.
LOOP AT x1 INTO y1 WHERE reptext NE space.
    CHECK y1-fieldname NE 'DELIVERY_DATE'.
    xlength = xlength + y1-intlen.
ENDLOOP.
DESCRIBE TABLE x1 LINES gv_entries.
Appending Delivery Date
ls_fieldcat-col_pos = gv_entries + 1.
ls_fieldcat-fieldname = 'DELIVERY_DATE'.
ls_fieldcat-ifieldname = 'DELIVERY_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Delivery Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = '/SAPAPO/DELIVERY_DATE' . "'DATS'.
ls_fieldcat-domname = '/SAPAPO/CHAR20'."'/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Delivery Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Start Date
ls_fieldcat-col_pos = gv_entries + 2.
ls_fieldcat-fieldname = 'STARTDAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Start Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Start Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Required Shelf Life Date
ls_fieldcat-col_pos = gv_entries + 3.
ls_fieldcat-fieldname = 'SL_MIN_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req.SL dte'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req.SL dte'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Shelf Life Date/Required Maximum Shelf life Date
ls_fieldcat-col_pos = gv_entries + 4.
ls_fieldcat-fieldname = 'SL_MAX_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'SL Date 2'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'SL Date 2'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending (Availability/Requirements) Date of a Schedule Line
ls_fieldcat-col_pos = gv_entries + 5.
ls_fieldcat-fieldname = 'AVL_REQ_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Schedule Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Schedule Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Req Date/ Shipment end date
ls_fieldcat-col_pos = gv_entries + 6.
ls_fieldcat-fieldname = 'SHIP_MAX_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req Date/ Shipment end date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req Date/ Shipment end date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Expected Grading Date
ls_fieldcat-col_pos = gv_entries + 7.
ls_fieldcat-fieldname = 'GRAD_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Expected Grading Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Expected Grading Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Available Date
ls_fieldcat-col_pos = gv_entries + 8.
ls_fieldcat-fieldname = 'AVAIL_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Available Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Available Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
MODIFY TABLE t_fieldcat FROM ls_t_fieldcat.
DATA lvc_t_fcat TYPE lvc_t_fcat.
*CODE FOR ADDING THE NEW VALUES*
ASSIGN Alert Structure to Field Symbols for Unicode
ASSIGN COMPONENT 0 OF STRUCTURE l_alert_str
                     TO            <alert_str>           CASTING.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = ls_t_fieldcat-fieldcat
    IMPORTING
      ep_table        = l_table_ref.
*assign dynamic structure
ASSIGN l_table_ref->* TO <aot_tab>.
CREATE DATA l_str_ref LIKE LINE OF <aot_tab>.
ASSIGN l_str_ref->* TO <aot_str>.
ASSIGN l_str_ref->* TO <alert_str_uc> CASTING.
LOOP AT t_alerts INTO l_alert_str.
   READ TABLE t_fieldcat WITH KEY aot = l_alert_str-aot
   INTO l_fieldcat_str.
   CALL FUNCTION '/SAPAPO/ATAB_FIELDCAT_GET'
     EXPORTING
       aot        = l_fieldcat_str-aot
       mview      = l_fieldcat_str-mview
     IMPORTING
       table_ref = l_table_ref
       t_fieldcat = lvc_t_fcat.
    ASSIGN l_alert_str TO <alert_str>.
*copy alert to aot-specific structure
    MOVE <alert_str>-info TO <alert_str_uc>.
*Write this code inside the loop
    ASSIGN COMPONENT 'DELIVERY_DATE' OF STRUCTURE <aot_str> TO <zat103>. "CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'STARTDAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MIN_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MAX_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVL_REQ_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SHIP_MAX_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'GRAD_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVAIL_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    MOVE <alert_str_uc> TO <alert_str>-info.
    MODIFY t_alerts FROM l_alert_str INDEX sy-tabix.
    CLEAR : <alert_str>, <alert_str_uc>.
ENDLOOP.
I have even tried Concatenating Values, with that method even though the NEW Values are available but they do not fall under the correct Column.
PLEASE help me out cos I am really Stuck.
Regards
Abhishek Sahi

Hi,
I need some help for passing values into the field Catalog of an ALERT Monitor.
The requirement is to add new fields in the ALERT Monitor and then populate them with values form the PRODUCT view.
I have implemented method MODIFY_ALERTLIST of BADI /SAPAPO/AM_ALERTLIST. I am able to add the new columns but I am unable to add the values. Actually while debugging i found that even though the NEW values are going into the table T_ALERTS, but the space between the New Added values and the original value is HUGE. Therefore when the Field Catalog is displayed in the Alert Monitor, the NEW Values are not shown.
I am attaching my Code
DATA: l_table_ref TYPE REF TO data,
l_table_ref_1 TYPE REF TO data,
l_fieldcat_str TYPE /sapapo/am_aot_fieldcat_str,
ls_fieldcat TYPE LINE OF lvc_t_fcat,
ls_t_fieldcat LIKE LINE OF t_fieldcat,
l_alert_str TYPE LINE OF /sapapo/alert_tab,
l_str_ref TYPE REF TO data,
l_str_ref_1 TYPE REF TO data.
FIELD-SYMBOLS: <aot_tab> TYPE STANDARD TABLE,
<aot_tab_1> TYPE STANDARD TABLE,
<alert_str> TYPE /sapapo/alert_str,
<aot_str> TYPE ANY,
<alert_str1> TYPE c,
<alert_str_uc> TYPE c.
FIELD-SYMBOLS: <zat103> TYPE c. "ANY.
DATA : l_col_pos TYPE i,
gv_entries TYPE i,
xlength TYPE i.
FIELD-SYMBOLS : <info> TYPE ANY,
                  <aot_str1> TYPE ANY.
DATA olen1 TYPE i.
DATA: t_pegid TYPE STANDARD TABLE OF /sapapo/amopegid_tab,
        t_ordid TYPE STANDARD TABLE OF /sapapo/amoordid_tab.
CLEAR: l_alert_str,
    l_table_ref ,
    l_table_ref_1 ,
    l_fieldcat_str ,
    ls_fieldcat ,
    ls_t_fieldcat ,
    l_str_ref .
*Add new column
READ TABLE t_fieldcat INTO ls_t_fieldcat INDEX 1.
DATA: x1 TYPE lvc_t_fcat,
       y1 LIKE LINE OF x1.
x1 = ls_t_fieldcat-fieldcat.
LOOP AT x1 INTO y1 WHERE reptext NE space.
    CHECK y1-fieldname NE 'DELIVERY_DATE'.
    xlength = xlength + y1-intlen.
ENDLOOP.
DESCRIBE TABLE x1 LINES gv_entries.
Appending Delivery Date
ls_fieldcat-col_pos = gv_entries + 1.
ls_fieldcat-fieldname = 'DELIVERY_DATE'.
ls_fieldcat-ifieldname = 'DELIVERY_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Delivery Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = '/SAPAPO/DELIVERY_DATE' . "'DATS'.
ls_fieldcat-domname = '/SAPAPO/CHAR20'."'/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Delivery Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Start Date
ls_fieldcat-col_pos = gv_entries + 2.
ls_fieldcat-fieldname = 'STARTDAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Start Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Start Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Required Shelf Life Date
ls_fieldcat-col_pos = gv_entries + 3.
ls_fieldcat-fieldname = 'SL_MIN_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req.SL dte'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req.SL dte'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Shelf Life Date/Required Maximum Shelf life Date
ls_fieldcat-col_pos = gv_entries + 4.
ls_fieldcat-fieldname = 'SL_MAX_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'SL Date 2'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'SL Date 2'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending (Availability/Requirements) Date of a Schedule Line
ls_fieldcat-col_pos = gv_entries + 5.
ls_fieldcat-fieldname = 'AVL_REQ_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Schedule Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Schedule Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Req Date/ Shipment end date
ls_fieldcat-col_pos = gv_entries + 6.
ls_fieldcat-fieldname = 'SHIP_MAX_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req Date/ Shipment end date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req Date/ Shipment end date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Expected Grading Date
ls_fieldcat-col_pos = gv_entries + 7.
ls_fieldcat-fieldname = 'GRAD_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Expected Grading Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Expected Grading Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Available Date
ls_fieldcat-col_pos = gv_entries + 8.
ls_fieldcat-fieldname = 'AVAIL_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Available Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Available Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
MODIFY TABLE t_fieldcat FROM ls_t_fieldcat.
DATA lvc_t_fcat TYPE lvc_t_fcat.
*CODE FOR ADDING THE NEW VALUES*
ASSIGN Alert Structure to Field Symbols for Unicode
ASSIGN COMPONENT 0 OF STRUCTURE l_alert_str
                     TO            <alert_str>           CASTING.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = ls_t_fieldcat-fieldcat
    IMPORTING
      ep_table        = l_table_ref.
*assign dynamic structure
ASSIGN l_table_ref->* TO <aot_tab>.
CREATE DATA l_str_ref LIKE LINE OF <aot_tab>.
ASSIGN l_str_ref->* TO <aot_str>.
ASSIGN l_str_ref->* TO <alert_str_uc> CASTING.
LOOP AT t_alerts INTO l_alert_str.
   READ TABLE t_fieldcat WITH KEY aot = l_alert_str-aot
   INTO l_fieldcat_str.
   CALL FUNCTION '/SAPAPO/ATAB_FIELDCAT_GET'
     EXPORTING
       aot        = l_fieldcat_str-aot
       mview      = l_fieldcat_str-mview
     IMPORTING
       table_ref = l_table_ref
       t_fieldcat = lvc_t_fcat.
    ASSIGN l_alert_str TO <alert_str>.
*copy alert to aot-specific structure
    MOVE <alert_str>-info TO <alert_str_uc>.
*Write this code inside the loop
    ASSIGN COMPONENT 'DELIVERY_DATE' OF STRUCTURE <aot_str> TO <zat103>. "CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'STARTDAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MIN_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MAX_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVL_REQ_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SHIP_MAX_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'GRAD_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVAIL_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    MOVE <alert_str_uc> TO <alert_str>-info.
    MODIFY t_alerts FROM l_alert_str INDEX sy-tabix.
    CLEAR : <alert_str>, <alert_str_uc>.
ENDLOOP.
I have even tried Concatenating Values, with that method even though the NEW Values are available but they do not fall under the correct Column.
PLEASE help me out cos I am really Stuck.
Regards
Abhishek Sahi

Custom Calculation Script to copy value of a field

Hi,
      I'm trying to copy the value of a field into another field and display it in the pdf. This is for the 1099's. We are trying to print 2 copies(Copy B and Copy 2) in one page. The first field will come from the XML file. I need to copy the value of this field into the second field. Can anyone please help me with the calculation script for this. I tried the getField.value and it didn't work in the pdf. Thanks.
With Regards,
Satishpdf.

Hi,
There are a couple of approaches.
One would be to put the script in the radio buttons that when clicked would do the calculate and set the value of the numeric field.
Another would be to have the script in the calculate event of the numeric field looking back at the value of the radio button. Taking this approach the script in the numeric field calculate event would look like this:
if (radioButton.rawValue == 1) // radio button bound to 1 is on/yes
     this.rawValue = ; // your calculation goes here
else
     this.rawValue = null;
This is testing the value of the radio button and then taking appropriate calculations.
Hope that helps,
Niall

=SUM(IIF(Fields!OPTION_CODE.Value="M","0",Fields!COST.Value * Fields!TOTAL_UNITS.Value )) =IIF(Fields!OPTION_CODE.Value="P","0",SUM(Fields!COST.Value * Fields!TOTAL_UNITS.Value )) =SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields

Similar Messages

Maybe you are looking for