Sum of the Results

hello...we have some problem in summing out the results for the /BA1/K62EAD here based on the /BA1/C62UEXPOS. When we execute the program, the results always showing a few lines of the same /BA1/C62UEXPOS as below:
/BA1/C62UEXPOS /BA1/K62EAD
a 20
a 30
a 40
b 30
and the expected results should be a = 90 which is a sum but we got the results as below which break down to several records. what can we do on these? we have the code as below:
SELECT /BA1/C20BPART
       /BA1/C62UEXPOS
       /BA1/K62EAD
       /BIC/OBJ_CURR
       FROM /1BA/HM_8QZO_400 INTO wa_rdldata
        FOR ALL ENTRIES IN i_resmort
            WHERE /BA1/CR0GROUP = group_id AND
                  /BA1/C62UEXPOS NE i_resmort-t_mort_ftid_dum.
   COLLECT wa_rdldata INTO i_rdldata.
   SORT i_rdldata.
ENDSELECT.

Hi,
try the code and revert back for any prob
SELECT /BA1/C20BPART
       /BA1/C62UEXPOS
       /BA1/K62EAD
       /BIC/OBJ_CURR
       FROM /1BA/HM_8QZO_400
     INTO table i_rdldata
        FOR ALL ENTRIES IN i_resmort
            WHERE /BA1/CR0GROUP = group_id AND
                  /BA1/C62UEXPOS NE i_resmort-t_mort_ftid_dum.
loop at i_rdldata INTO wa_rdldata.
COLLECT wa_rdldata INTO i_rdldata.
endloop.
Regards,
Anirban

Similar Messages

How to get a sum of the result?

I want to get the results to display the records only once if
I have the same case number.
This is my query.
SELECT distinct c.case_number,
c.bank_name,
i.first_name,
i.last_name,
it.id_name,
i.id_number1,
i.date_of_birth,
i.country_of_birth,
(select count(*) from #application.db#.anc_comments ac
join #application.db#.anc_hit h on ac.hit = h.hit_id
join #application.db#.anc_individual i on i.individual_key =
ac.individual_key
where i.case_number = c.case_number and
convert(integer,h.hit_code_value) > 0) as num_hits
FROM #application.db#.anc_case c
LEFT OUTER JOIN #application.db#.anc_individual i
on c.case_number = i.case_number
LEFT OUTER JOIN #application.db#.anc_id_type it on
i.id_type1 = it.id_class
left outer join #application.db#.anc_agency_response r
on i.individual_key = r.individual_key
WHERE (DATEDIFF(day, r.name_check_sent, getdate()) <= 90
or r.name_check_sent is null)
and (c.completed <> 'Yes' )
order by #url.sort#
My result displays the same case number more then onces for
some Case numbers. How do I make my query to combine or only
display the Case number once.
Case Number Bank Name
111-11-456456 AB Bank Name 2
11-11-09-14.001 AB Bank name 3
11-111-1114 AB Bank name 4
94-10-01-06.002 Citizens Bancorporation, Inc.
94-10-01-06.002 Citizens Bancorporation, Inc.
94-10-01-06.002 Citizens Bancorporation, Inc.
94-10-01-06.002 Citizens Bancorporation, Inc.
94-10-01-06.002 Citizens Bancorporation, Inc.
06-11-09-14.999 Kenco Bancshares, Inc.
Thanks for your assistance

Perhaps because you are using an OUTER JOIN - anytime the
entire set of selected columns is not distinct you will get another
row. Distinct applies to the entire row not just the case number.
Phil

Getting descrepency in the result row of the Query

Hi All,
I am executing a query which is having 4 Keyfigures and 2 formulas.
I am getting wrong result in the query for formulas.
Below is the query structure
           f1        f2         f2%f1       f3       f4            f4%f3
date
1
2
         792    408        51.78        9647    8403       88.57
All the keyfigures - result is set as total
Formula                - result -nothing is defined(under calculation tab)
The result I am expecting for column 3 is 408/792 = 51.51
The result I am expecting for column 6 is 8403/9647=87.10
To get the expecte result what changes i need to do to the formula.
Thanks
Jagadeesh

Hi Anand,
Thanks for your reply.
If i change it to summation, it will give me sum in the result row.
I am not looking for summation, i want percentage for (overall result F2/overall result F1).
Thanks
Jagadeesh

Integrating a waveform to obtain a running sum of the amplitude

I am trying to decide the easiest way to integrate a waveform. I have obtained a signal and done a series of waveform operations on it, not I need to sum up the amplitudes of the waveform. I am assuming that the best way to do this is going to be using some sort of integration. I can't seem to get a simple integrator to do this.
Thanks for your help

Here is a little more information about the application. I have used data aquisitions to aquire two AC voltage waveforms. I have rectified the waveforms, and summed the two waveforms together. Now I need to take a summation (running sum) of the resulting waveform. Accuracy is somewhat of a concern, as this running sum will be used to calculate a series of costs and usage characteristics.
Hope this helps by giving an idea of what I am looking to do.
I have tried to do the numeric integration, but I am having a problem getting the waveform to sample as needed. My other idea was to convert the waveform to (x,y) coordinates and work with that data. I'm not sure what the best way will be.

How to display Average, not Sum, in the "Overall Result" row of a report?

Every report I look at or execute that has an Overall Result row always shows a total(sum) of all the cells in the column. I recently came across one that shows the average of all the cells in the column and after looking at the query in BEx Query Designer 7.0 and BEx Analyzer 7.0 I cannot seem to find out where to set this. All of the Key Figures are listed as "Nothing Defined" in the Calculations tab which is exactly what they should be, but where can I set that yellow-highlighted Overall Result row to calculate an average, not a sum?
Example can be found in this picture:
http://img87.imageshack.us/img87/6757/pic1yp.jpg
Thanks for the help!

My issue was that I was setting my KF's to 'Calculate Result As: Average' within the Query View that I was editing but the change was not showing on my screen when I have that View opened within the Analyzer. Infact, it still is showing totals. But when I execute my Web Template that references this Query View, the graph does display the result row using Averages. Seems to just be a visibility bug, but it is now working.
Thanks for the reminder about that property KP,
Scott

Access the results of the following query in Java? SELECT sum(COL_X) FROM TABLE_A

Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery(
"SELECT sum(COL_X) FROM TABLE_A");
int = rset.getInt("sum(NUM_CUSTOMER)");This is obviously wrong. Could someone please help me a little on the syntax? I just want to be able to get the sum of the numeric values in a column without having to loop through a ResultSet and manually adding up the total. My question is how can I access the results of this query by assigning the sum to a java variable?

Hi,
Probably the easiest way is to use an alias for the sum column, i.e.:
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery(
"SELECT SUM(COL_X) MY_SUM FROM TABLE_A"
int i = rset.getInt("MY_SUM");null

Oracle 11g SUM function on the result of inner Select

The inner Select returns rows with the values. The outer select running on tthe result of inner select SUM the result of the inner select.
Although there are valid rows of the inner select the SUM in the outer SELECT return NVL. As a comment any aggregate function on the outer select returns NVL.
The query is below.
select a.yil,
a.ay,
sum(brut_prim),
sum(kom),
from (SELECT oid_pol_kesilen_acente,
to_char(pp.zeyil_tanzim_tar, 'yyyy') yil,
to_char(pp.zeyil_tanzim_tar, 'mm') ay,
sum(decode(substr(pp.no, 1, 1),
'T',
pp.zeyil_brut_prim_fark / 2,
pp.zeyil_brut_prim_fark)) -
sum(pp.zeyil_gv_fark) brut_prim,
sum(pp.zeyil_acente_kom_fark) kom
from pol_police pp, org_acente oa
WHERE SUBSTR(PP.NO, 1, 1) != 'D')
group by oid_pol_kesilen_acente,
to_char(pp.zeyil_tanzim_tar, 'yyyy'),
to_char(pp.zeyil_tanzim_tar, 'mm')) a
group by a.yil, a.ay, oid_pol_kesilen_acente
Edited by: [email protected] on May 7, 2010 2:09 AM
Edited by: [email protected] on May 7, 2010 2:31 AM

Hi,
please try the below sql:
select a.yil, a.ay, sum(brut_prim), sum(kom),
from (SELECT oid_pol_kesilen_acente,to_char(pp.zeyil_tanzim_tar, 'yyyy') yil, to_char(pp.zeyil_tanzim_tar, 'mm') ay,
sum(decode(substr(pp.no, 1, 1), 'T',nvl(pp.zeyil_brut_prim_fark,0) / 2,nvl(pp.zeyil_brut_prim_fark,0))) - sum(nvl(pp.zeyil_gv_fark,0)) brut_prim,
sum(nvl(pp.zeyil_acente_kom_fark,0)) kom
from pol_police pp, org_acente oa
WHERE SUBSTR(PP.NO, 1, 1) != 'D'
group by oid_pol_kesilen_acente,
to_char(pp.zeyil_tanzim_tar, 'yyyy'),
to_char(pp.zeyil_tanzim_tar, 'mm')
) a
group by a.yil, a.ay, oid_pol_kesilen_acente ;
Thanks,
Siva

How to sum the result rows at query designer

Hi,
We want to sum the result rows which are at the end of the row by the help of query designer?So ,we directly see at analyzer
exp:
..A.jan...A.feb...B.may...B.jun...SumA...SumB....SumA+B
X..1............9..........6..............7........10.........13..........?????
Edited by: zarata on Oct 23, 2011 12:49 PM
Edited by: zarata on Oct 23, 2011 1:07 PM

Hi,
Could you please provide some more information.
if you have characteristics iobject whose values are (A, B etc) and calendar month in rows and then at column level you have key figures then if you have turn on the "Display Result Rows" property of both iobject in Bex as "Always" you can get the result. At the same time you can set "Display Overall result" property of the Query to get overall result.
Regards,
Pravin

Excel allows array arithmetic (e.g. sum(a1:a5* b1:b5) where the contents of the cells are the results of formulae. Numbers only allows constants in the array cells. Right? Any work-arounds?

Excel allows array arithmetic (e.g. sum{(a1:a5* b1:b5)} where the contents of the cells are the results of formulae. Numbers only allows constants in the array cells. Right? Any work-arounds?

CJPerry wrote:
Any work-arounds?
There is a very simple one : use libreOffice.
Yvan KOENIG (VALLAURIS, France) dimanche 1 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

How do I display decimal hour as time? Example, I created a formula (originally in Exel) where the result is 2.25. I need this to be displayed as 2:15, (2h, 15m). Here is the formula in cell b8 =SUM((A6/18)*B3 (B6/8)*B3 (A6 B6)/70*B3 B2)/60

How do I display decimal hour as time in Numbers for iPhone5 ? Example, I created a formula (originally in Exel) where the result is 2.25. I need this to be displayed as 2:15, (2h, 15m). Here is the formula in cell b8 =SUM((A6/18)*B3 (B6/8)*B3 (A6 B6)/70*B3 B2)/60. The result can be in either b8 or a different cell.
Thanks for helping this novice

B1=DURATION(0,0,A1,0,0,0)
The DURATION function combines separate values for weeks, days, hours, minutes, seconds, and milliseconds and returns a duration value.
DURATION(weeks, days, hours, minutes, seconds, milliseconds)

How do i put the result of a sum in a variable ?

Hi All...
I have two columns in my template, one is debit and another one is credit...
I did a sum in debit column and a sum in the credit column...
Now i need to subtract the sum of debit from the sum of credit,
i was thinkin about put these results in a variable (something like make a "sumResultA" and "sumResultB" and make a field like this <?((sumResultA) - (sumResultB))?>...
so... how do i put the result of a sum in a variable ???

<?xdoxslt:set_variable($_XDOCTX, 'variablesumResultA', (sumResultA))?>
<?xdoxslt:set_variable($_XDOCTX, 'variablesumResultB', (sumResultB))?>
<?xdoxslt:set_variable($_XDOCTX, 'variablesumResultAB', ((sumResultA) - (sumResultB)))?>to set the, use as above.
to display them
<?xdoxslt:get_variable($_XDOCTX, 'variablesumResultB')?>
<?xdoxslt:get_variable($_XDOCTX, 'variablesumResultA')?>
<?xdoxslt:get_variable($_XDOCTX, 'variablesumResultAB')?>

Formula to calculate SUM of multiple sheets of excel and the result to be stored in another excel sheet and pop up alerts for multiple rows

I have a excel with multiple
sheets with data as shown below
SHEET 1
A 1
B 2
C 3
SHEET 2
B 1
C 2
A 3
SHEET 3
C 1
A 2
B 3
My
query is splitted into 3 categories
I want to have a formula to do math calculation such that data of "A" of SHEET 1 is calculated with "A" of SHEET2 irrespective of the location of "A".
When I include SHEET3, the formula should automatically identify the location of "A" or "B" or "C" and give the result corresponding to A, B or C. Since I want to bifurcate daily report and output printed. I want to use another
excel for output. How to link multiple sheets of one excel and print the output of above in
another excel?
Assume, I have 4 SHEETS, "SHEET 1", "SHEET 2", "SHEET 3" and "SHEET 4". Math calculation need to be done using all 4 sheets. If
I include "SHEET 5", the formula should ignore SHEET 1 automatically and give the results of SHEETS 2 to 5. Similarly, if I include SHEET 6, SHEET 1 and 2 need to be ignored for further calculation and SHEET 3-6 need to be used. How to write
such formula?
How to get pop up alert for multiple rows, if a specific condition is hit?

Maybe VBA Code should be a good option for you. I suggest you post you issue to
Excel for Developers forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Best Regards,
Wind

OBIEE Report - filter based on the result from another analysis

Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4

Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours

My Macbook Pro is running very slow. Here are the results of Etrecheck

Results:
EtreCheck version: 1.9.12 (48)
Report generated July 15, 2014 7:02:27 PM CDT
Hardware Information:
MacBook Pro (15-inch Early 2008) (Verified)
MacBook Pro - model: MacBookPro4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
GeForce 8600M GT     - VRAM: 256 MB
Color LCD 1440 x 900
spdisplays_display_connector
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:3:55
Disk Information:
Hitachi HTS542520K9SA00 disk0 : (186.31 GB)
- (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) / [Startup]: 185.99 GB (115.42 GB free)
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Kernel Extensions:
[not loaded] com.anchorfree.tun (1.0.1) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.1.14) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.1.14) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.1.14) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.1.14) Support
Startup Items:
VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.anchorfree.ajaxserver.plist Support
[loaded] com.google.keystone.daemon.plist Support
Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
iTunesHelper
Genieo
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
Unity Web Player: Version: UnityPlayer version 4.1.2f1 Support
RealPlayer Plugin: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
QuickTime Plugin: Version: 7.6.6
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 10.1.10 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins:
BrowserPlus_2.9.8: Version: 2.9.8 Support
3rd Party Preference Panes:
BrowserPlus Support
Flash Player Support
Top Processes by CPU:
      8% Safari
      3% WindowServer
      0% mds
      0% fontd
      0% coreservicesd
Top Processes by Memory:
63 MB WebProcess
39 MB WindowServer
33 MB Safari
25 MB mds
14 MB Finder
Virtual Memory Information:
1.13 GB Free RAM
312 MB Active RAM
383 MB Inactive RAM
190 MB Wired RAM
146 MB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Problem with the result of multiple queries in Web Intelligence (BO XI R2)

We have a problem with Web Intelligence reports. Behavior of the results is like if we selected the function Count in Designer the properties indicators. Same queries separated one for one report give correct results and together 7 queries in one report give correct results only for the first query and for others (6 others) same results for each date (if report is monthly) or the same result for each hour (if the result is daily) for all Queues tested (other which were not tested have result 0). Even the function Sum inserted into the report structure behaves weird u2013 we have the same result as in the filed (it is a copy of that result, not a sum). We tested queries together in SQL Developer and they give correct results, while in BO big query which contains script from Query 3, Query 2 and Query 1 cannot be completely executed (it executes without end).
We use Business Objects XI R2 SP3.
Thanks in advance.

Hi Peter,
I guess it is the problem due to the merged dimension and different granurality level in the BO queries. From the document properties uncheck the option of auto-merge common dimension objects or manually unmerge all the common dimensions
than give it a try.
I guess this would solve your problem. If not can you provide more query details like what objects you have used in the query.

Sum of the Results

Similar Messages

Maybe you are looking for