Summary Report based on Subreports or other Crystal Reports
We use several Detail Reports. Additional we want to create a summary Report where we can see certain values or totals of the Detail Reports.
Is there a way to combine this information with Crystal?
You can set the value in the subreport like this:
shared NumberVar orderamount;
orderamount := {Orders.Order Amount};
You can sho the set value in your main report using the following code:
shared NumberVar orderamount;
orderamount
Regards
Stratos
Similar Messages
-
Report exported in Crystal Reports 9 won't work in Crystal Reports XI R2
Hello,
I have a .NET client that has been using Crystal Reports 9 for some time to generate reports and then exporting them to Crystal Reports format (.rpt), and saving the report including the data so that the user can open it at a later time and preview/print. This has been working fine so far.
Now we're in the process of updating our system to Crystal Reports XI R2. When a user selects an old report (that was originally created in CR9) to preview, CR XI prompts the user to submit a value for a string parameter that was originally submitted to the report when it was generated in CR9 but the value was set as either Nothing or the empty string. If we try to print the report then CR XI throws this error (probably because of the same parameter):
CrystalDecisions.CrystalReports.Engine.ParameterFieldCurrentValueException: Missing parameter values. ---> System.Runtime.InteropServices.COMException (0x8004100E): Missing parameter values.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.ReportSource.EromReportSourceBase.HandleException(Exception exception)
at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
Is there a solution to this? I've tried to submit a value to the parameter in code and then exporting the report again but that doesn't work. Any help appreciated.Hello,
Currently the FP is not available from our public site, it should be soon though.
Here's a link to get to our download page. If it asks please agree to download the authentication certificate.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
Thank you and sorry for the delay. -
Free Report Writer for Oracle Database except Crystal Report and Data Vison
Dear All,
I want Free Report Writer for Oracle Database except Crystal Report and Data Vision software.
Wr are working on Linux and windows both platform.
Any one have direct link or website address for it ?
Regards,
Vipul Patel
AhmedabadPlease check the following link -
http://www.google.co.in/search?client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&channel=s&hl=en&q=open+source+report+writer+for+oracle&meta=&btnG=Google+Search
Regards.
Satyaki De. -
Displaying record based on the condition in Crystal report
Hi All,
I want to display certain records in crystal based on some condition.
For example,
If I am having 5 student records like,
Name Mark1 Mark2 Mark3 Total
aaa 40 50 60 150
abc 30 60 40 130
tcr 25 25 25 75
Now in table i have only 4 fields (STUNAME, MARK1, MARK2, MARK3).
I have to calculate the total at runtime and if total is greater than 150, then actual record should display in report.
For example, I can use formula to calculate total but I can calculate total only after each record prints. But i want to calculate total internally only it should display in report if condition satisfies. I dont want to keep one more field for total in crystal report.
Please help me on this.If the filter is not "pushed" down to the database, then Crystal will pull all of the data into memory and then filter it there. This is not a big deal if you only have a couple of records, but it can significantly slow down a report that is pulling in more than a few records.
An alternative, if your report is just linking tables in the Database Expert, would be to create a SQL Expression that adds the three fields together. Using this in the Select Expert WILL push the condition down to the database.
If you're using a command instead of linking table, they you would add this to the Where clause of the comment. If you're using a stored proc instead of tables or a command, you would want to do this filter in the code for the stored proc.
-Dell
Message was edited by: Dell Stinnett-Christy -
Migrating from Crystal Reports Charts using TopN and "Other" to Reporting Services
I am currently migrating several Crystal Reports that have charts. The chart series is set to use the TopN values in a count, and combine the rest of the series into one series titled "Other". I see how to filter the chart using TopN, however I need to still show the rest of the data grouped as "Other". I think the solution I need is to create a group expression that uses some sort of IIF function to create the "Other" group, but I haven't found a function that I can use to get the results I need. Any ideas?
ScottWe were looking at report deployment options and evaluating SSRS vs Crystal Report Server. There were several reasons we decided to go with SSRS:
Cascading Parameters
Ability to use multiple data sets in one report
SSRS seemed more user-friendly than CRS
There were a few other considerations I can remember now, but the final reason was price. My company already had the licenses for SQL Server. However, even if that was not a consideration I still would have gone with SSRS.
Hope this info helps.
Scott -
Universe based on SAP BW in Crystal Reports
Hello everybody.
Yesterday I've visited the CeBIT.
Here I've talked to other colleges working on BO issues.
We're using the Version BO Enterprise XI 3.0. In this version it is not possible to use Universes in Crystal Reports 2008 that base on SAP BW content.
A college showed me Polestar XI 3.1.
I've asked him if this problem from above is solved in the XI 3.1 version of BO.
He did not know exactly.
So could someone tell me, if it is possible in BO Enterprise XI 3.1 to use Universes in Crystal Reports that were build on SAP BW content?
Thanks in advance.
SebastianHi everybody,
we are discussing about that fact in another thread.
I would appreciate if you join the discussion under:
OLAP universes and Crystal Reports
Thank you for any comments
Sebastian -
Reporting tools for the Business user - Crystal reports or BEx tools ?
Hi,
We have recently implemented BI/BO infrastructure. Scope of the inital implementation was an executive dashboard based off COPA data. We have used Xelcisus for dashboard and BEx tools for query design etc.
We would like to set up some of our key business users (analysts in respective functions) to be able to write their own queries off this COPA cube. The discussion point is whether to roll out Crystal reports for business users or have them trained on BEx tools i.e BEx query designer/analyzer.
Any inputs to my question "Crystal Reports or BEx tools for the Business users - pros and cons", is appreciated.
Thanks,
GirishOur user currently do not have anything. It's fresh implementation. We would like to get the business users involved. The question is - what's the best start for a business user - Crystal Reports or Bex ?
-
How to create cross tab reports using RAS SDK api with Crystal Reports XI
Hi Everybody,
Iam generating reports in a web-based application with Crystal Reports XI using Report Application Server(RAS) SDK API. The columns in my report exceed that of an A4 sized page. So, when I export that report to pdf, only those columns that fit to a page are showing up. To solve, this problem, I thought of using cross tab. But, I donot know how to generate cross tab report using RAS SDK API. I have tried to get some code from the internet. But, I did not find any java code for that.Can some one give me some sample code.It is very urgent.
Thanks in advance.Hi,
The easiest way I use is to create the worksheet as regular table and then when i verify the data I get (non aggregate) I duplicate it as a cross tab.
In the duplication wizard I just need to define the axis (using drag and drop).
if you want to create a cross tab from the beginning you need to define that in the new workbook wizard (check the "cross tab" rather then "table"), chose your fields and define the place you want them.
The data point (the center of the cross tab) is aggregated as to your machine definition and will happen automatically.
for example: to find the amount of receipt by months:
On the left put the "Buyer Name", on top put the "Months" and in the data point put the amount.
What you'll get is something like:
months: jan feb mar apr ......
buyer_name
jhon_smith 100 50 30 250 ......
jhon_doe 80 45 90 453 ........
and so on..... -
How to create a report using XML data source from Crystal Report Designer
Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
<CUSTOMER_ORDER_CONF_REP>
<ORDER_NO>D555809</ORDER_NO>
<PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
<AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
<CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
<CUST_NAME>Mr.Johan Matts</CUST_NAME>
<SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
<SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
<SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
<SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
<BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
<BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
<BILL_ADDR_3>Watthala</BILL_ADDR_3>
<BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
<CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
<CUSTOMER_FAX>112984639</CUSTOMER_FAX>
<CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
<ORDER_LINES>
<ORDER_LINE>
<LINE_NO>1</LINE_NO>
<CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
<PRICE_TOTAL>1200</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>1</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID xsi:nil="1"/>
<CHARACTERISTIC_VALUE xsi:nil="1"/>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>2</LINE_NO>
<CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
<PRICE_TOTAL>1500</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>3</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>3</LINE_NO>
<CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
<PRICE_TOTAL>1000</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>1</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>4</LINE_NO>
<CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
<PRICE_TOTAL>1350</PRICE_TOTAL>
<DISCOUNT>10</DISCOUNT>
<PRICE_QTY>1</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>5</LINE_NO>
<CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
<PRICE_TOTAL>400</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>2</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
</ORDER_LINES>
</CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1. New Report
2. From Create New Connection-> XML
3. Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4. Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
CUSTOMER_ORDER_CONF_REP_REQUEST
CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1 Billing Address 1
Shipping address 2 Billing Address 2
Shipping address 3 Billing Address 3
Shipping address 4 Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026 LINE_NO CUSTOMER_PART_NO CUSTOMER_PART_DESC SALE_UNIT_PRICE PRICE_QTY DISCOUNT PRICE_TOTAL
Characteristic details belonging to Order line 1 CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka -
Crystal reports 2008 SP1 missing in BusinessObjects Crystal Reports website
We have used Crystal reports 2008 as a reporting utility in our application and have released our product last year. During our release the latest software available was Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7 and same was mentioned in our documentation as mentioned in BELOW.
The current supported version of Crystal Reports is Crystal Reports 2008 with
Service Pack 2 and Fixpack 2.7. The installation sequence is as follows:
1. Install Crystal Reports 2008 base.
2. Install Crystal Reports 2008 SP1.
3. Install Crystal Reports 2008 SP2.
4. Install Fixpack 2.7. This can be found under the hotfix section on the web site.
Questions
1) Now the issue is that, Crystal reports 2008 SP1 is NOT available for download in the "Business Objects u2013 Crystal Reports Runtime Packages". Why was it removed? Any clue? Without this our instructions doesn't hold good.
2) If Crystal reports 2008 SP1 will NOT be available any more then what is the equivalent installable for "Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7" to be used? Can Crystalreports 2008 SP3 Full Build + Fix Pack 3.3 be used instead of "Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7" ?
Pls Clarify.Hello,
Download Service Pack 3.0 full build: https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
and then Fix Pack 3.3: https://smpdl.sap-ag.de/~sapidp/012002523100016815822010E/cr2008fp33.exe
Then you and your users don't need to go through all of those upgrade steps.
Thank you
Don -
How to suppress the report based on outer dimension in nested report
Hi Experts,
We have a report with nesting of two dimensions in rows. They are Program dimension and Account Dimension.
We need to supress the report based on the program dimension members. i.e whenever there are no values against all the accounts for a particular program that particular program should get supressed.
In the screenshot attached I am looking to supress the rows 37,38 and 39 as the data against this program is empty.
However I dont want to supress the rows 31 and 33 as there is a capital data against this program in row number 32. So we have to supress the rows based on absence of data at program level.
We are using SP14 on BPC 10.
I remember that such functionality could be acheived in BPC 7.5 by flagging the required dimension to have suppress in Expansion Range. So I guess, similar functionality would be there in BPC 10 as well.
I have evaluated the option of VBA macro to hide the required rows, but was wondering if we can achieve the same using EPM functionality as we used to do in BPC7.5.
Thanks in advance for your suggestions!!
Regards,
ShivaHi Shiva,
First you have to check the option Keep Blocks:
This option will show the whole block even if only one line contain some not zero/empty cells in the row.
Second, when you select option Filter on All Columns/Rows you have to select OR as operator between columns:
In this case the test for >0 (or for <0) will be applied to each column and the result will be OR'ed with other columns. True will be even if one column contains not zero and not empty cell.
You logic to check individual column require to hardcode the members - not good!
Vadim
P.S. If you select AND for Filter on All Columns/Rows - then only lines with all cells with non zero / non empty will be shown as in your example! -
How to schedule the webi report based on data changes in the report data
Hello,
I want to schedule a webi report based on data change in a column in the report.
The scenario is something like below:
1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
Anybody done this before.
Thanks
GauravHi,
May be these links can help you:
http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
SEM-BCS: Load from data stream schedule
Attribute Change Run -
Binding Sub Report based on link clicked in main report in BIDS
Is it possible to bind Sub Report based on the link clicked in main report which is the parameter for sub report in BIDS?
Hi Thanuja534,
If I understand correctly, you want to add a drillthough action on a report to jump into another report with a specified parameter.
A report can contain links to other reports. The report that opens when we click the link in the main report is known as a drillthrough report. Drillthrough reports are a type of report that we access by clicking a link in the current report. When we click
a text box that has a drillthrough action, we open the drillthrough report. If the drillthrough report has parameters, we must pass parameter values to each report parameter.
Besides, drillthrough reports must exist on the same report server as the main report, but they can be in different folders. We can add a drillthrough link to any item that has an Action property, such as a text box, an image, or data points on a chart.
For more information about adding parameters to pass to a Drillthrough Report, please see:
http://technet.microsoft.com/en-us/library/aa337477(v=sql.105).aspx
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Cyrstal Report Server Version Compatible With What Crystal Reports 2008 Ver
I am currently running Crystal Report Server Version 12.1.0.882 . I am having issues getting my reports to run on the reporting server. I need to install Crystal Reports on the same machine so that I can test the connection to the database that we are reporting on. The Crystal Report 2008 version I have is 12.2.0.290 but it is incompatible with the current Server version so they can not both run on the same machine.
What version of the Crystal Reporting Server matches up with the latest version of Crystal Report 2008 12.2.0.290?If you want to run Crystal Reports created with Crystal Reports 2008 designer (I believe you are using SP2) you need to have Crystal Reports Server 2008.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken -
Failed to view report when using ActiveXViewer.cab of Crystal Reports XI
Hi
I failed to run Active Server Pages sample application that uses Crystal Reports XI Developer Edition on windows server 2003 machine ie 6.
What i am getting is a grey page with tiny x mark, meaning that activex failed to load (if i am not mistaking)
I have followed "Troubleshooting Report Designer Component Application Issues" document and succeded in
1. manually activeX installing (checked in ie and it a matching object appeared there).
2. succesfully ran the "test.wsf" (xsl was created)
but still in ie activex won't load.
Any help will be appreciated...
thx
Edited by: Daniel Polonsky on Mar 11, 2009 11:29 AMTry this code, the report source uses Enterprise but you should be able to replace that with local file:
Sub Window_Onload
'On Error Resume Next
Dim webBroker
Set webBroker = CreateObject("CrystalReports115.WebReportBroker.1")
if err.number <> 0 then
window.alert "The Crystal Report Viewer is unable to create its resource objects."
elseif ScriptEngineMajorVersion < 2 then
window.alert "IE 3.02 users on NT4 need to get the latest version of VBScript or install IE 4.01 SP1. IE 3.02 users on Win95 need DCOM95 and latest version of VBScript, or install IE 4.01 SP1. These files are available at Microsoft's web site."
else
Dim y, z, yy
z = 10
y = 4
Dim URLwebSource(13)
Dim webSource(13)
Set router = CreateObject("CrystalReports115.ReportSourceRouter.1")
for x = 0 to y
Set webSource(x) = CreateObject("CrystalReports115.WebReportSource.1")
next
' for x = 0 to y
'reportIDs(1) = 763
'response.write reportIDs(x)
<%
for x = 0 to 4
response.write(VBCRLF&"URLwebSource(" & x & ") = ""/crystalreportviewers115/viewrpt.asp?id=" & reportIDs(x) & "&apsuser=Administrator&apspassword=&apsauthtype=secEnterprise""")
next
%>
' URLwebSource(x) = "/crystalreportviewers115/viewrpt.asp?id=" + reportIDs(0) + "&apsuser=Administrator&apspassword=&apsauthtype=secEnterprise"
' next
for x = 0 to y
'webSource(x).PromptOnRefresh = True
webSource(x).ReportSource = webBroker
webSource(x).URL = URLwebSource(x)
next
for x = 0 to y
router.addreport webSource(x)
next
CRViewer.ReportSource = router
end if
CRViewer.ViewReport
End Sub
Thank you
Don
Maybe you are looking for
-
Use of Vendor and Customer in 'Define Shipping Data for Storage Location"
Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b> In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage locati
-
IPhoto won't import photos from new 70D
Hi - I'm hoping for some guidance. I was a Rebel Xsi user for years, and just got a 70D. I used to be able to plug my camera in and iphoto would open up and import everything. Now, it only works sporadically, which is even weirder than not working at
-
Calling an Oracle stored procedure
Hello, I already succeed to call a stored procedure in Oracle but only simple ones with one output value and several inputs. I don't any idea left so any help would be great :) Thanks But on one procedure, i'm having a prb: I get an error: java.sql.S
-
Whenever I save an image in photoshop as a jpeg file, the jpeg comes out much darker than how it looks when it is in photoshop. How do I save an image, keeping the colour the same as it is in photoshop??????? Help Please!
-
Does firefox create multiple restore sessions and save them?
Sometimes my computer crashes twice in a row, or things happen similar to this. When this happens, the "Restore Session" is not available on the history dropdown menu. Why is that? Is there a way to make this happen? No way can I go through the total