Sun LDAP to SQL server provisiong

I am a new to Sun IDM.
I am planning to use Sun IDM for a simple provisioning requirement. We have all our external (yahoo, hotmail type) users in our sun LDAP and need to be synced (one way) to a sql server based on certain group type. So far from sun documentation I could figure out that I have to
(1) switch on retro change log of source LDAP.
(2) configure a active sync adapter.
However, I am not sure where to start. I just configured the source LDAP as a resource and did a (full reconciliation) from it. Here are my questions.
(1) should I configure the source LDAP user as "service Provider User " OR "Identity Manager User". Asking since, the users are outsider, not our employee.
(2) After the "Load from Resource" operation I see list of accounts pulled from the LDAP. However, I don't see any other attributes other than userId (account Id) in the "List Account" page. do I have to customize the ../accout/List.jsp page ?
(3) what are the next high level tasks to sync the changes to a sql server ?
Thanks!

Thank You Roman, Looks like I need some more spoon feedings to overcome the initial learning curve.
I did what you suggested. Created two resources (Ldap & SQL Server). I could load the accounts from the LDAP resources. Now I wanted to do the followings:-
(A) Load users from Ldap to Sql server based on the filter say "userAssociation=Finance", where 'userAssociatation' is custom attributes in the LDAP for the user object.
(B) Continue the above said provisioning for all new users from Ldap.
I tried to Edit "Synchronization Policy" for SQLServer resource. My question is,
(1) Where in the "Edit synchronization policy" screen I can mention the rule "userAssociation=Finance" ?
(2) I have enabled the "Retro Changelog Plugin" for the LDAP. Do I have to mention this somewhere for this Ldap to SQLServer provisioning ?
Thanks!
Kabi

Similar Messages

Are there any rough processes for Solaris administrator to setup Sun LDAP as nameing server at Sun sparc host? like: 1st: modify /etc/nfsswitch.nfs 2nd: add LDAP server in /etc/hosts. 3rd: ......

Besides, can we install the LDAP server in sparc hosts as nameing system? Can we use Sun LDAP server or iPlanet Directory Server? or need BIND DNS server too?

There is a nice book from Michael Haines and Tom Bialaski: "Solaris and LDAP Naming Services" which contains all you need to configure Directory Server, LDAP, Naming Switch...
Ludovic.

BOXI # 1 On Sun SOlaris with SQL Server 2005

HI Friends,
Could some on provide me the Procedure to follow to install Sql Server JDBC Drivers 2.0 on Solaris Server and Installing Repository on to the SQL Server 2005.
I appreciate Your help
Thank You

You seem to have done everything correctly and diligently. I would ask that you open
an official support case.

Oracle (Unix) to SQL Server (NT Authenticated)

I've setup Heterogeneous Connectivity to connect from my Oracle Server (on Sun Solaris) to SQL Server database configured for NT User Authentication.
I'm getting the following error from my ODBC driver (DataDirect/Merant):
SQLConnect: Failed...
SQLSTATE = 28000
NATIVE ERROR = 18456
MSG = [DataDirect][ODBC SQL Server Driver][SQL Server]Login failed for user 'KWood'.
I'm not sure how to connect to the SQL Server database since it is authenticating logins via NT.
My user account is a network id...
Any ideas?
Ken

Ken,
Please contact Oracle support for this issue.
Vira

Creating a connection pool using SQL Server 2000, Sun ONE Application Serve

Has any one succesfully configured SQL Server 2000 to work with Sun ONE Application Server 7 on Windows 2000 server service pack 4? I am embarking on a new J2EE project and I need to configure it as soon as possible.
The problem I am having is that, when I ping the data souce name, there is a connection error.
I have set the data source name and other details as follows:
Under JDBC, I have set the parameters for the connection pool as follows:
Data Source Name:      com.microsoft.jdbc.sqlserver.SQLServerDriver
Database Name:          jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=Test
User:               test
Password:          test
In the JVM settings page, I have set the prefix class path as follows for the location of the Microsoft JDBC
drivers that I downloaded as follows:
c:\microsoft\drivers/lib/msbase.jar
c:\microsoft\drivers/lib/msutil.jar
c:\microsoft\drivers/lib/mssqlserver.jar
Under JVM Options, there is a strange setting which I don't understand: perhaps this is the cause of the
connction error?
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
Please help????

I'm in a similar boat...
Trying to setup AS7 JDBC and followed the instructions on the link you provided and get the following exception. I kept the case the same, thinking 'setpassword" was incorrect, so I tried changing the property to "Password", but get the same exception but it points to "setPassword" instead.
SEVERE: RAR5041:Cannot get jdbc connection
com.sun.enterprise.repository.J2EEResourceException
java.lang.NoSuchMethodException: setpassword
at com.sun.enterprise.repository.JdbcConnectionPool.createDataSource(JdbcConnectionPool.java:243)
at com.sun.enterprise.resource.JdbcUrlAllocator.createResource(JdbcUrlAllocator.java:80)
at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
at com.sun.enterprise.resource.JdbcXAConnection.<init>(JdbcXAConnection.java:74)
at com.sun.enterprise.resource.Jdbc10XaAllocator.createResource(Jdbc10XaAllocator.java:94)
at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:170)
at com.sun.enterprise.resource.JdbcDataSource.internalGetConnection(JdbcDataSource.java:241)
at com.sun.enterprise.resource.JdbcDataSource.getConnection(JdbcDataSource.java:98)
at com.rvi.database.jdbcConnection.getConnection(jdbcConnection.java:93)
at com.webapp.database.ArticlesDAO.selectByYear(ArticlesDAO.java:102)
at com.webapp.actions.ArticleAction.list(ArticleAction.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)

Problem with netbeans 5.5 + sun app server 9 + ms sql server 2005 + datadir

hi ,
i am having new netbeans 5.5 beta with sun java application server 9 and microsoft sql server 2005 , my question is simple whats is the correct procedur to retrive schema and table and generate ejb etc... adn to update data base using
datadirect . bcos whatever i do it is giving me this error
Deploying application in domain failed; Deployment Error --
Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: Class name is wrong or classpath is not set for : com.ddtek.jdbcx.sqlserver.SQLServerDataSourceError Code: 0
C:\Documents and Settings\chirantan\WebApplication4\nbproject\build-impl.xml:437: Deployment error:
The module has not been deployed.
See the server log for details.

Hi,
I have installed J2EE 5 SDK on windows XP. When I installed NetBeans 5.5.1 and tried to register it with Application Server, it got registered automatically. I had to uninstall both due to some reasons, now when I installed both j2ee and netbeans again, i see D:/Sun/AppServer folder empty and not able to register NetBeans 5.5.1 with application server. I tried again and again by reintalling but AppServer folder remains empty and not able to register. Any help for this issue??????????

Unable to connect Informatica on Sun Solaris to a SQL Server datasource

Background*
We have a fully operational OBIEE with OBIA Apps infrastructure running with Informatica PC8.6 ETL suite. Informatica services are running on a Sun Solaris 64 bit platform.
We currently extract data from two Oracle EBS 11.5.10 sources. Now we are trying to extract data from a new MS SQL Server 2000 source into the OBAW.
Problem*
I'm trying the use the native ODBC 5.2 Data Direct driver to connect the the data source.
I've gone through and completed the 9 steps of the 'Connecting to an ODBC Data Source' chapter in Informatica on our Solaris Unix box.
I've made the following changes to the *.profile*
# ODBC HOME
ODBC_HOME=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2
export ODBC_HOME
ODBC_INI=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2/odbc.ini
export ODBC_INI
PATH=${PATH}:$ODBC_HOME/bin
export PATH
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:$ODBCHOME/lib
export LD_LIBRARY_PATH
I've also made changes to the odbc.ini file as suggested:
[MSS_DB]
Driver=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2/lib/DWmsss22.so
Description=DataDirect 5.2 SQL Server Wire Protocol
Address=MssServer.xxx.co.uk,1433
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=MIS_Report_DB
LoadBalancing=0
LogonID=myuser
Password=mypwd
QuotedId=No
ReportCodePageConversionErrors=0
InstallDir=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2
I've created the Connection--> Relational --> ODBC connection on Workflow Manager
I've specified the username/pwd and connect string MssServer.xxx.co.uk@MIS_Report_DB. I've called it exactly the same as MSS_DB specified in the odbc.ini
When I run the workflow. It fails but doesn't throw up any error/error code in the session log. The last 3 lines of the Session Log below and then it just bombs out within 5 secs.
PETL_24006 : Starting data movement.
TM_6660 : Total Buffer Pool size is 4234808 bytes and Block size is 468312 bytes.
DBG_21438 : Reader: Source is [MssServer.xxx.co.uk], user [myuser]
If you ping from the Unix server it says 'MssServer.xxx.co.uk is alive'
Can anyone suggest what we need to do different or spot something obvious?
Edited by: bebedi123 on 13-Apr-2010 09:43

user00726 wrote:
i am able to create files in /tmp
$ pwd
/tmp
$ touch test
$ ls -l
total 64
drwxr-xr-x   2 root     other        194 May 27 14:20 OraInstall2009-05-27_02-20
-02PM
drwxr-xr-x   2 root     other        194 May 27 14:35 OraInstall2009-05-27_02-35
-06PM
drwxr-xr-x   6 root     other        445 May 27 14:38 OraInstall2009-05-27_02-38
-48PM
-rw-rw-r--   1 root     sys         6644 May 27 14:00 ps_data
-rw-r--r--   1 oracle   dba            0 May 27 16:04 test
$and i have also removed /tmp_dir_n8ai9b files
but still there is a problemYou have root as owner of subdirectories (e.g. OraInstall2009-05-27_02-38-48PM) and not oracle:
- do you install as root now?
- or make the directories writable for oracle, too.The write flag is missing (something like chmod -R a+w OraInstall2009-05-27_02-38-48PM)
Edited by: TanteKaethe on May 28, 2009 9:54 AM

Setting up Connection Pool in sun app server 8.1 with SQL server 2000

Hello,
I am trying to set up a connection pool & data source for SQL server 2000 (MSDE 2000).
Here is what I attempted to do:
I have a pool data source in a jar file called poll.jar and I copied it to C:\sun\Appserver\lib (Install dir\lib)
com.microsoft.mspool.PoolDataSource is the pool data source class.
In the Admin console, JDBC>Connection pools. Selected NEW and made the following entries.
GENERAL SETTINGS
Name: MsPool
Datasource class name : com.microsoft.mspool.PoolDataSource
Resource type: javax.sql.DataSource
POOL SETTINGS: default values
CONNECTION VALIDATION: default values
TRANSACTION ISOLATION: default values
PROPERTIES:
DataSourceName:PoolDataSource
NetworkProtocol:tcp
DatabaseName: myDB
Password:User specific
user:User specific
server: localhost
PortNumber:1433
I get the following error when I ping:
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Class name is wrong or classpath is not set for : com.microsoft.mspool.PoolDataSource.
Can any one help me if have a solution?
Thanks in advance.
mag

You need to copy your jar to ${AS_INSTALL}/domains/domain1/lib/ext (replace domain1 by your
domain). Another option is to leave the jar in ${AS_INSTALL}/lib and add a entry in the classpath-suffix element of your domain.xml.
thanks,
:aditya

URGENT ! Using Sun's J2EE RI Server with MS SQL Server 2000

I'm using the J2EE Server that comes with the J2EE 1.3.1 package from Sun. I'm trying to load a datasource using the free MS SQL Server 2000 Driver for JDBC, but I'm always getting this error (I've run out of ideas so maybe someone in this forum can help):
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is: java.rmi.RemoteException: nested exception is: javax.ejb.EJBException: Unable to connect to database. No suitable driver; nested exception is: javax.ejb.EJBException: Unable to connect to database. No suitable driver ...
I'm using MS SQL Server 2000 Driver for JDBC, my classpath setting is:
CLASSPATH=D:\j2sdk1.4.0_01\jre\lib\ext\mysql-connector-j-2.0.14;D:\MS-JDBC-Driver\lib\msbase.jar;D:\MS-JDBC-Driver\lib\mssqlserver.jar;D:\MS-JDBC-Driver\lib\msutil.jar;E:\Installers\Java Related\jdbc dirvers\JSQLConnect3_27\JSQLConnect.jar
I have the same J2EE_CLASSPATH setting in my userconfig.bat file.
I've loaded this driver class in deploytool:
com.microsoft.jdbc.sqlserver.SQLServerDriver
and my connection url is:
jdbc:microsoft:sqlserver://localhost:1433;databasename=test
What's weird is that I've also tested these settings with a simple Java Application and they worked fine, but when I try to use the same for the j2ee server from sun, I always get the annoying "no suitable driver" error.
If anyone has ever come up with a solution that works, please help. You may post you reply here or better yet, email me at [email protected]
Thanks a lot in advance !

Hi,
The error "no suitable driver" occurs when something goes wrong with the connection URL.so make sure that u are using the correct URL format (check if any of the info is case sensitive etc) or atleast try other URL alternatives (for MS jdbc driver).
try these changes only through deployment tool->tools->server configuration->datasources->standard.(instead of editing resource.properties directly).
last not the least - make sure that there is NO "rem" keyword before "set J2EE_CLASSPATH" in the userconfig.bat file :)
HTH,
- asharafkk

Advantaged of SUN LDAP Server over OID

Hi all,
Can any body tell me the use of SUN LDAP Server instead of Oracle Directory Server......What all advantages we have to use SUN LDAP Server instead of OID....
Regards
Kumar

If no one tells you can assume there is no advantage, simple.

Updating Sun LDAP Server through custom create group forms

Hi,
we have requirement whererin we must create a create group form (custom form) and then update the new group details to the Sun LDAP server. After defining the LDAP Resource, how do I proceed in creating the resource object and configuring the same with the 'create group form ' for updating the necessary attributes in LDAP server.

There is no way to perfrom LDAP authentication using our product without a mapped group. I haven't used it in a while but the Sun LDAP mamagement tools were very straight forward, creating users/groups issn't much trouble
First creat the users and groups wherever in the direcotry, then in the group properties you must make the users members of the groups. Map the groups into BO and your done.
If you wanted someone to setup both your LDAP directory and Business Objects typically a 3rd party professional service may be used. For configuring BO you can open a case with the authentication team in support if stuck. You could get some tips as most of our engineers have set up sun a few times for internal testing.
Regards,
Tim

Linked Servers - Sql server 2005 to connect to Oracle 11g using ldap.ora instead of tnsnames.ora

We have a SQL Server 2005 64bit box that needs a linked server created to Oracle 11g 64bit box. I have all the Oracle client software installed and can successfully connect to the Oracle database using SQL+ on the SQL Server 2005 64bit box. When I create
the linked server and select the OraOledb.Oracle provider, I get the TNSNames error. The Oracle server does not use tnsnames.ora it uses OLAP.ora to resolve. How do I get Linked server to stop trying to connect via TNSNames and use the OLAP.ora file instead?
I can't find any articles for this specific issues. All Oracle examples tell you to use TNSNAMES. The Oracle server is not under my companies control so I can not force the vendor to use tnsnames instead of OLAP.

Hi,
Have you got a resolution?
Thank you.

Configure MS SQL Server 2000 DataSource in Sun Java Systema App Server

How can I configure Sun Java Systema App Server 8 to use a DataSource of MSSQL Server 2000?

This has been covered in this forum multiple times. It is also documented in the SJSAS developers guide jdbc chapter. If you still have questions, please post, but the info has previously been discussed here and recently

Query ODSEE from windows SQL server

Hello,
I have a windows server running SQL EXPRESS 2012 and I need to retrieve some data from an external server that uses LDAP.
Normally I'm able to query this server using LDP.exe and it shows the version as:
vendorname: Oracle Corporation;
vendorversion: Sun-Directory-Server/11.1.1.5.0;
I have found some examples on how to connect the SQL instance to a Microsoft Active Directory Server and make queries in a SQL-like way, and I was wondering if there is any connector that will allow me to do the same with an ODSEE LDAP server.
Thanks in advance.

Hello,
Yes, as I said, I have no problems in launching queries from ldp.exe, but I want to automatize it using a SQL query from SQL server.
SQL Express 2012 has a built-in controller for Active Directory that can be configured somehow to run queries to a LDAP server. Has anyone configured something like this?
Thanks

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

Sun LDAP to SQL server provisiong

Similar Messages

Maybe you are looking for