Supplier Registration Information

Hi Everybody,
I have couple of questions on supplier registration. We are implementing ROS on SRM 5:
1. Is the supplier registration information searchable? In other words can I write a report to get all suppliers who have registered themselves for certain categories? If the information is not searchable how can I make the information searchable?
2. Is it possible to use Supplier Registration to gather quality & certification information periodically? Let's say i have 100 suppliers who initially registered in ROS. I send out detailed questionaire that also captures quality and certification information. After a year I want to check with these suppliers if quality and certification information they submitted are still valid?
3. If bullet#2 is possible, is it possible to extend the functionality in bullet#2 to vendors that have been created in the R3 system (without having these vendors to first register themselves first).
4. Can bullet#3 be automated (i.e depending on when the supplier registered every year I would like to send out the quality and certifications automatically)?
Any help you can provide will be highly appreciated.
Thanks
Venkat

Ramki -
Thanks for your quick response. Want clarification on your point#1:
- The information in BUPA (that can be viewed through BP txn) is only generic in nature. Where can we see what categories the vendor signed up for or certifications the vendor says he has that were provided in the surveys?
Appreicate your help.
Thanks
Venkat

Similar Messages

How can I stop Firefox from blocking sites that do not supply ownership information?

I am trying to access a website and I get a 400 Bad Request message. Further "research" leads to the "This website does not supply ownership information" message. I have cleared history and cookies, reloaded the page and followed all the answers given in relevant support pages but nothing works. All other browsers allow me to see the page, but I do not want to keep switching to chrome or IE. There must be a security setting somewhere that must be switched off. I find it extremely annoying to be saddled with settings I have not asked for, have no information on have no way to control. This is what Microsoft does and why I use Mozilla.

It would help if you could provide the address for an example of such a site so others may check it. Give as an example something publicly accessible and not needing registration.
Is any other software interfering?
* what is ''Intel web components for Intel® Identity Protection Technology ''
Have you tried clearing site cookies, reloading using Ctrl+F5 and maybe clearing the Firefox cache.
If you have problems with only one site and only in Firefox, the problem is often outdated or corrupt files relating to that web page. I suggest you try the following.
*Note It '''looks''' complicated but check the site after each numbered step, the first or 2nd step may solve the problem The linked articles have '''pictures''' ( screen shots) of the actions you need.
# Try using the sites home page or a direct link and not a bookmark.
# Reload website using an extra step to use avoid using the cached info.
#* Hold down the Shift key and left-click the Reload button OR Press '"Ctrl + F5"' |(Mac ) "Cmd + Shift + R"
#Clear the cache, and cookies only from problem websites.
##Remove the cookies for a single problem website Use: FirefoxButton / Tools → Options → |Privacy| → "Remove individual cookies" See: [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]'''_delete-cookies-for-a-single-site'''
## Clear the cache Use ''FirefoxButton / Tools → Options → |Advanced | → Network >'' See: [[How to clear the Firefox cache#w_clear-the-cache]]_clear-the-cache
# If the above did not work try in Firefox'[http://kb.mozillazine.org/Safe_Mode s] Safe Mode to check if an extension or some other factor causes the issue. Use: FirefoxButton /Tools → Help → ''Restart with Addons disabled... ''. See: [[Troubleshoot Firefox issues using Safe Mode]] also see [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Duplicate vendor check during supplier registration

Hi Gurus,
Does SAP SRM ROS check for duplicate vendor during supplier registration? if it is not done in standard, can it be enhanced to do so?
Thanks and regards,
Ranjan

Hi Ranjan,
Every supplier who registers will have a unique BP number in the ROS client. However checking for duplicacy by name is not supported in standard ROS.
One option is that when a strategic purchaser accepts these suppliers and creates a BP in SRM, he notices a duplicacy and informs the vendor. However this will fail if there is a huge volume of vendors registering everyday.
Possible workaround: When the new vendor fills in the registration form, he provides the name of organisation and this is stored in tables using BAPIBUS1006_CENTRAL_ORGAN. May be you can sit with an ABAP guy and find out in which table this entry sits. You can then have a Z table where you store all these organisation names whenever a new vendor registers and for checking duplicacy you could run a loop through this Ztable Column which stores the name and display a message on 'ROS_SELF_REG' BSP reg page whenever a duplicate entry is found.
PS : Entries like 'IBM' and 'IBM Ltd' will still be created as 2 different entities even though they mean the same.
Nikhil
Edited by: Nikhil RGupta on Jun 21, 2011 11:31 AM

Response Questionnaire of Supplier Registration

Hi all!
We have a problem with the supplier self registration process...
After the supplier complete the self registration (BSP ROS_SELF_REG), receives a questionnaire in his mail box. This questionnaire have a button (Send Questionnaire) to response and send back the questionnaire to SRM.
But our button doesn´t have any effect, because it is a link to nothing (href="#").
We don´t know if we have to configure something before...
Can you help us? Thanks in advance!
Regards,
Roberto

HI all.
I am setting up the Supplier registration via SUS. client 120(SRM), 130(SUS).
We know the registration form works with the default URL and is sending questionaires from SRM using the service ID in 120. However I have the email forwarding etc for the questionaires response setup on 130 to go to our exchange server and then back to SUS on port 25130... If I try to add parameters to the registration url sap-client=130 it bombs on me and I get this error...
Error when processing your request
What has happened?
The URL http://dp2dca0u.state.pa.us:8001/saP/bc/bsp/sap/ros_self_reg/main.htm was not called due to an error.
Note
The following error text was processed in the system DP2 : Parameters required to call function module COM_CATEGORY_READ_TEXT_MULTI are missing
The error occurred on the application server dp2dca0u_DP2_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Function: COM_CATEGORY_READ_TEXT_MULTI of program SAPLCOM_CATEGORY_TEXT_API
Method: GET_TEXT_FOR_CATEGORIES of program CL_ROS_SURVEY_CUSTOMIZING=====CP
Method: ONCREATE of program CLO251NVV1MH7YR6J7P0CT3KBE4BDCP
Method: %_ONCREATE of program CL_O251NVV1MH7YR6J7P0CT3KBE4BDCP
Method: DO_INIT of program CL_BSP_PAGE===================CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DP2 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server dp2dca0u_DP2_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server dp2dca0u_DP2_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 130 -u: SRMSVC -l: E -s: DP2 -i: dp2dca0u_DP2_01 -w: 0 -d: 20060624 -t: 145259 -v: ERROR_MESSAGE_STATE -e:
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
1.) Am I approaching this right if I want the registration system to be in SUS(130)?
2.) how do I figure out what these missing parameters are ? and where do I update them?
Many thanks in advance for any help you can offer.
regards
Andrew
[email protected]

Supplier Registration - Is it possible to push new created vendor in SRM?

Hi SRM / SUS experts,
We are defining Supplier Registration processes and had a question with regards to it. After getting supplier information through forms and questionnaire, let's say I approved it and then converted it to Vendor in SRM. Then, is it possible to push newly created vendor back to ECC? I see (database) icon to push vendors to ECC in monitor Business partners transaction, but it is disabled. I am thinking since I have not set up XI integration with ECC, the icon is disabled.
Will you please share your experience with this functionality?
If it can be pushed, then which account group will it take when it is created inECC and which views are created (General data views?)? Is it created under same number as SRM business partner?
Your inpur is highly appreciated.
Thanks,
Chandra

please refer to the following SAP help for more details on the Montior Business Partners --> and what can be done there
http://help.sap.com/saphelp_srm50/helpdata/en/e6/4b4b3c99c53c33e10000000a11405a/frameset.htm
--> you have to open the tree --> Business Partner Monitor..
and for the option --> to be enabled --> to transfer to backend -> it is looking for two flags
1) Xi should be active in your system
and please refer to the following code --> which decides wether the backend transfer should be enabled (or) disbaled...
technically i know where it happens
transaction se38 --> enter --> LBBP_SUPP_MONIF05..
find the code which starts with -->
Enable Icon For XI backend Transfer

Supplier Registration in ESourcing ( Vendor integration with ECC or MDM )

Hi All,
SAP ESourcing has the functionality of Supplier Registration. As per the functionality, Supplier will provide all the required information in the registration form. The Supplier form will go for approval to the Buyer / Purchaser. Once approved, the supplier will considered for RFx event. My questions are :
1 :Is there OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with ECC so that system will automatically create new vendor in ECC.
2 : Is there OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with MDM (Master Data Management system ) .
Please through some pointer on this ?
Regards,
Kalandi

Hi Kalandi
For your first question, if you deploy standard integration package provided by SAP for e sourcing-ECC integration, you can replicate approved e sourcing vendor to ECC using standard script (I think script name is "Publish to ECC" ).
In case you prefer a custom option,you can write a customized script to get a flat file (.CSV) download of e sourcing vendor whcih can be used to update ECC
As far as OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with MDM (Master Data Management system ) is concerned, there is no standard solution provided by SAP but again since it is possible to get a CSV export of vendor field, it can be used to update MDM as well
Hope this helps!
Regards
Mudit Saini
Edited by: Mudit_UCB on Jun 28, 2011 1:20 PM

Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

Hi All,
I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
I have set the authentication scheme to Oracle Application server Single Sign On.
When i run the application i am getting the below error.
Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
Please help me to resolve this.
Thanks and Regards,
Suhas

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

Error in portal_sso_redirect missing application registration information:

Hi,
I am getting the following error message, when i run any of my APEX Page. Please help me to resolve this issue.
Error in portal_sso_redirect missing application registration information:
p_partner_app_name:g_listerner_token:HTML_DB:stbp5.oracle.com:80
please register this application as described in the installation guide.
What is the issue? What is the fix for that?
Regards
Balaji S

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

Error "Registration information is invalid" when you start Premiere Elements 7 (Windows)

Issue
When you start Adobe Premiere Elements 7 for the first time, Premiere Elements returns the error message "Registration information is invalid. Please reinstall Adobe Premiere Elements."
Solution
Do one of the following solutions:
Solution 1: Install Premiere Elements 7 using the Premiere Elements 7 serial number.
If you purchased Premiere Elements bundled with Photoshop Elements, you may have used the Photoshop Elements serial number included in the pack to install Premiere Elements. Uninstall Premiere Elements and reinstall Premiere Elements using the Premiere Elements serial number.
Note: The Premiere Elements serial number starts with the number set 1143. The Photoshop Elements serial number starts with the number set 1057.
Solution 2: Use a Company Name with 40 single-byte characters or fewer, or 20 double-byte characters or fewer.
When installing Premiere Elements, you are asked to provide a user name, a company name, and a serial number. While the company name field is not a required field for installation, if you choose to enter data, do not enter a name that contains more than 40 single-byte characters or more than 20 double-byte characters.
Note: A single-byte character is any character in the standard ASCII character set. English language characters are all single-byte characters. Double-byte character code uses two bytes to represent one character. The double-byte character set was developed for the Japanese, Chinese, and Korean characters sets. Many extended ASCII characters are also double-byte.
Solution 3: Install Premiere Elements to a location that does not contain extended ASCII characters in the file path.
Do not install Premiere Elements to a location that uses extended ASCII characters in the file path. Extended ASCII characters include characters such as , –, ›, †, ‡, ‘, Ÿ.
Note: The default installation path for Adobe Premiere Elements does not contain extended ASCII characters.

Thanks. I thought of that. But won't I get whammied for registration again? I just registered this at adobe last month after rebuilding a crashed system. In other words, will Adobe know that I've uninstalled it, and therefore have an available license? Thanks for the welcome. I've been a Studio premium user for 3 years, and now that my product is no longer supported....I need support!
Thanks.

Homesite keeps asking for registration information

I have been using Homesite 5.5 for several years. I was using it successfully in Windows 7, 64 bit. I recently upgraded my desktop to Windows 8, 64 bit, and when I went to use Homesite for the first time since the upgrade, it asked for my registration information, including serial number, as if it hadn't been registered. After I entered it, it asked for the serial number of the program I had upgraded from, which I also entered. It then brought up the registration screen again, followed by the previous serial number screen, etc. After going through this three or four times, I was finally able to get into the program, but after I closed the program and tried to open it again, the same thing happened. Even though I have Dreamweaver (and the entire CS 5 Design Premium suite), I prefer to use Homesite, and want to find out how to get it functional again. I assume this is something to do with the registry, but have no idea how to fix it. Any suggestions would be appreciated.

Hey Folks, I think I have found a solution - even if I cannot prove if it can be reproduced on any other machine:
After having the same Problem I tried several workarounds - and suddenly one crazy idea I had worked out:
Run Homesite under "compatibility mode"***
Enter registration information
Homesite will run - but most of the menu bars won't appear. Don't mind: compatibility mode was only necessary once to remember the registration information...
Close Homesite and switch back to normal mode
Homesite will start and stop asking for registration info...
This worked well on my Windows 8.1 Pro 64 Bit System - I hope, it works well with all your Systems too! Homesite is such a perfect simple editor and I'd badly miss it if it would not run on my system...
*** For compatibility mode:
Open the Homesite program folder in Explorer and look for Homesite.exe
Right click on homesite.exe --> properties
Select "compatibilty mode"*
* I am using a German Windows and am not quite sure, if "compatibility mode" is the correct translation into English. If not, look for something similar...
Good luck to all of you Homesite-Lovers!

Query related to supplier registration

Hi,
During the supplier registration process can we rate the supplier based on the questionnaire which they have completed and submitted, means is it possible to convert the data i recieve from the supplier in the questionnaire to numberic format and then decide whether to approve or reject the supplier considering it as supplier rating.
Please advise.
Regards
GGL

it would be something like this, Try this
1 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swaptxt
2 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans3
3 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swapxml
4 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans2
5 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swappdf
6 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans1
7 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
swapxml -> swap.keyName -> payload-name
swapxml> swap.keyValue> file2
swappdf -> swap.keyName -> payload-name
swappdf> swap.keyValue> file1
trans1> Transform.ContentDescription>file1
trans1> Transform.ContentDisposition>attachment
trans1> Transform.ContentType>application/pdf;name="file1.pdf"
trans2>Transform.ContentDescription>file2
trans2>Transform.ContentDisposition>attachment
trans2> Transform.ContentType>application/xml;name="file2.xml"
trans3> Transform.ContentDescription>file3
trans3> Transform.ContentDisposition>attachment
trans3> Transform.ContentType>application/txt;name="file3.txt"
mail --> mime.contenttype --> multipart/mixed
I have not tried this myself. but it should work

Supplier Registration without SUS or XI?

Can I do Supplier (Vendor) Registration without SUS or XI? If not, what are my limitations?
I am using SRM server 5.5, and am not using CCM as the supplier directory. I am not using questionnaires. ROS_SELF_REG works. However, I cant notify vendors via email of acceptance. Because I dont have SUS, I cant use SRMSUS_SELFREG and SRMSUS_SELFEDIT, correct? To do User Registration, can I use ROS_SELF_EDIT?
How is workflow WS10000209 (Approving External User Master Record) used?
I appreciate any feedback.

Hi Scott
It's difficult to give a reply hre, but let me give it a try...For more details, try the links given above by other friends.
You do not need SUS for Self-registration.
COnfig
1)Create another client for ROS.
2)Create RFC destination for EBP system in new client. Similarly, maintain RFC dest for ROS client in EBP system.
3)Maintain backend systems for ROS system in EBP and EBP system in ROS.
4)Configure some product categories (need not replicate from ERP) to be used during registration.
5)Configure the IMG settings for Supplier Self-registration (they are easy..just go through them once.
6)Configure SCOT settings (check notes 455140) for outbound & inbound mails.
7)Maintain org plan for purchasing org (ppoma_bbp)& vendor group(ppomv_bbp). No need for elaborate org plan like in EBP...just simple org plan.
8) Maintain table BBP_marketp_info (Txn:SM30)
9) Activate ROS_SELF_REG, ROS_prescreen etc ROS services in SICF
10) Maintain client and logon info in ROS_SELF_REG service (SICF)
11) In EBP client, maintain SAP client parameter for role SAP_EC_BBP_ST_PURCHASER for BSP link preselect suppliers (right click and change node details).
12) Maintain catalog call structure settings in EBP client IMG for the ROS supplier directory. The URL shd be taken from ros_prescreen attributes in ROS client.
Process:
1) With the service ROS_SELF_REG, a partner can register. System creates a BP (prospect) in the ROS client.
2) An email is sent to the given email id
3) Fill the attachment and click 'send survey' button. An email is sent to the system and system copies the survey response to the registered business partner
4) From EBP client, click on preselect suppliers. System launches the ROS client registrations listing screen.
5) Check the suppliers registered, check the data and accept/reject the supplier registration
6) Accepted suppliers data can be pulled into EBP through 'Maintain Business Partners' transaction and create supplier (bidder/vendor) in EBP client.
Hope it helps
Best regards
Ramki

Supplier registration

Hi,
Is supplier registration a separate system all together.
Pls let me know I wan to cinfigure Supplier registarion with MM (SRM isan addon to ERP)
Regards,
Manu

While accesing the supplier registration screen the following error is displayed:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (wipro statt wipro.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team
Pls advise.
Regards,
Manu

Rcv'ng message: This web site does not supply ownership information. Connection not encypted. Q: What setting can I change in Firefox to allow access?

Website: g01cdwascl002.ahe.pok.ibm.com
Owner: This web site does not supply ownership information.
Verified by: Not specified
Technical Details:
Connection not encrypted

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

After starting my computer today and trying to visit and open bookmarked web sites, I cannot open them because I am getting this error message: This web site does not supply identity information. What happened? How do I fix it? Thanks

Today, when I tried to open web sites in Firefox from my Bookmarks, I could not. I continually received the following error message: This web site does not supply identity information.
I noticed that when I put the cursor on the box to the left of the address, that message appears. There is also '''no''' https:// before the address.
Can anyone help correct this problem? I believe sometime last week I may have fiddled with the Secutity settings in the Tools/Security option box and may have screwed up something trying not to have sites use cookies to track me?
Thanks,
Bob

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Supplier Registration Information

Similar Messages

Maybe you are looking for