Support 4Gb files on Oracle 9.0.1

Why new version of Oracle Database 9.0.1 on Linux has no support for files more than 4Gb (bug 1759839)?
Linux works with large files and modern hard disks are 45-60Gb in size.
Oracle 9i on Linux still is a disabled...

Apply the latest 9.0.1.3.1 core database patchset then apply the OLAP Patch 9.0.1.2.1, these are available on metalink.

Similar Messages

Does Oracle Tutor support ".xlsm" file format ?

Does Oracle Tutor support ".xlsm" file format ? Where to find the list of supported file formats?
Customer is using Microsoft Office Professional Plus 2010 and EBS R12.1.3.
Thx,
Phil.

Fonzi,
Good, then we are talking about the same thing when it comes to states. The following defines all the digital logic states our hardware supports:
http://zone.ni.com/reference/en-XX/help/370520K-01/hsdio/flogic_states/
A note in that document states the hardware modules that can support all the digital states. The 6541 can still accept the WDT data type, since in your code it did let you. It just doesn't support some of the digital states that it contains. Since it doesn't have hardware compares, it can't handle the compare states. If the WDT only had
You are correct, you must use the WDT when using the extended digital states. Its documented here:
http://zone.ni.com/reference/en-XX/help/370520J-01/hsdio/digitalwaveformdata/
All of my resources have been found in the NI-HSDIO Digital Waveform Generator/Analyzer Help file, which is installed onto your computer with the HSDIO driver. An online version can be found here:
http://zone.ni.com/reference/en-XX/help/370520K-01/
Product Support Engineer
National Instruments

I am trying to import BPM Project.zip file into Oracle enterpriserepository

I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
I am getting the following exception. please help if any one know the solution.
Performing import...
Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
     at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
     at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
     at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
     at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
Audit results stored in:
C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
Thanks in Advance.

Hi
Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
They are something that need to be deployed from the process admin on BPM.
There would be the .exp file you would need as its BPM 10g that you would need to use.

Getting Error while using LKM File to Oracle(SQLLDR) KM in ODI

Hi All ,
Could anyone please help me out on this error which i am getting while using LKM File to Oracle(SQLLDR)
My Scenario :
1. I have my CSV file created in one location with some records .
2. Created a new interface having this CSV file as source(File Technology) and Table as target (Oracle technology)
3. Here i want to get the contents from csv and store into the target table by using SQLLDR .For that i am using this KM- LKM File to Oracle(SQLLDR)
4. By Executing the Interface i am getting following error at step 6 -call sqlldr
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 22, in <module>
Load Error: See E:\demo1\file/SALES.log for details
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 22, in <module>
Load Error: See E:\demo1\file/SALES.log for details
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.doRaise(PyException.java:219)
at org.python.core.Py.makeException(Py.java:1166)
at org.python.core.Py.makeException(Py.java:1170)
at org.python.pycode._pyx2.f$0(<string>:59)
at org.python.pycode._pyx2.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
... 19 more
Here the sales.log file is not created in the above directory .I am not getting where it is actually went wrong.
I searched for the solution and i could not find any.Please help me out as it is high priority for me.
I tried to run SQL*Loader through command prompt and i am able to generate the data in the target table and not getting it through ODI.
Atleast is there any workaround .Please suggest me.
Environment Details: ODI_11.1.1.7.0, Oracle DB 11g
Thanks,
keerthi

Which agent are you using to execute?
Standalone? If standalone, did you start it with OPMN? I've seen such issues with standalone agent started with OPMN.
Generally these kind of issues occur when you try to run with standalone agent started with OPMN.
Because OPMN does not have access to the environment shell variables PATH or ORACLE_HOME and therefore the sqlldr.exe binary (or other Oracle product binary) is not found for execution.
In this case, you need to specify PATH and ORACLE_HOME variables in opmn.xml file like below for your agent(say "MyStandaloneAgent" in this case)
<ias-component id="MyStandaloneAgent">
<process-type id="odiagent" module-id="CUSTOM">
<environment>
<variable id="ORACLE_HOME" value="C:\oracle\product\11.2.0\client_1"/>
<variable id="PATH" value="C:\oracle\product\11.2.0\client_1\BIN;$PATH"/>
After that, start and stop the agent and try the execution once again.

Error while loading data from flat file to Oracle DB

I am new to ODI. I am trying to load data from a flat file to Oracle DB using the LKM File to Oracle (External Table) and using the IKM Oracle Incremental Update. I am getting the following exception during the "Create External Table" stage:
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2473)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:561)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.<init>(PyException.java:43)
at org.python.core.Py.JavaError(Py.java:455)
at org.python.core.Py.JavaError(Py.java:448)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx1.f$0(<string>:50)
at org.python.pycode._pyx1.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
... 1 more
Caused by: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
... 33 more
Could anyone please provide any pointers.
Thanks,
Srini.

The code that is executed is as follows:
createTblCmd = r"""
create table ODITEMP.C$_0PARTNER
C1_C1 NUMBER(14),
C2_C2 VARCHAR2(12),
C3_C3 VARCHAR2(18),
C4_C4 NUMBER(7),
C5_C5 TIMESTAMP(11)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY dat_dir
ACCESS PARAMETERS
RECORDS DELIMITED BY 0x'0D0A'
CHARACTERSET 'WE8ISO8859P1'
STRING SIZES ARE IN CHARACTERS
BADFILE 'partners.txt_%a.bad'
LOGFILE 'partners.txt_%a.log'
DISCARDFILE 'partners.txt_%a.dsc'
SKIP 0
FIELDS
MISSING FIELD VALUES ARE NULL
C1_C1 POSITION(1:14) ,
C2_C2 POSITION(15:26) ,
C3_C3 POSITION(27:44) ,
C4_C4 POSITION(45:51) ,
C5_C5 POSITION(52:62)
LOCATION ('partners.txt')
PARALLEL
REJECT LIMIT UNLIMITED
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit()

Where can I change the buffer size for LKM File to Oracle (EXTRENAL TABLE)?

Hi all,
I'd a problem on the buffer size the "LKM File to Oracle (EXTRENAL TABLE)" as follow:
2801 : 72000 : java.sql.SQLException: ORA-12801: error signaled in parallel query server P000
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04020: found record longer than buffer size supported, 524288, in D:\OraHome_1\oracledi\demo\file\PARTIAL_SHPT_FIXED_NHF.dat
Do you know where can I change the buffer size?
Remarks: The size of the file is ~2Mb.
Tao

Hi,
The behavior is explained in Bug 4304609 .
You will encounter ORA-29400 & KUP-04020 errors if the RECORDSIZE clause in the access parameters for the ORACLE_LOADER access driver is larger than 10MB and you are loading records larger than 10MB. Which means their is a another limitation on read size of a record which is termed as granule size. If the default granule size is less then RECORDSIZE it limits the size of the read buffer to granule size.
Use the pxxtgranule_size parameter to change the size of the granule to a number larger than the size specified for the read buffer.You can use below query to determine the current size of the granule.
SELECT KSPFTCTXPN PARAMETER_NUMBER,
KSPPINM PARAMETER_NAME,
KSPPITY PARAMETER_TYPE,
KSPFTCTXVL PARAMETER_VALUE,
KSPFTCTXDF IS_DEFAULT,
KSPPIFLG MODIFICATION_FLAG,
KSPFTCTXVF VALUE_FLAG
FROM X$KSPPI X, X$KSPPCV2 Y
WHERE (X.INDX+1) = KSPFTCTXPN AND
KSPPINM LIKE '%_px_xtgranule_size%';
There is no 'ideal' or recommended value for pxxtgranule_size parameter, it is safe to increase it to work around this particular problem. You can set this parameter using ALTER SESSION/SYSTEM command.
SQL> alter system set "_px_xtgranule_size"=10000;
Thanks,
Sutirtha

MAPPING FLAT FILE TO ORACLE ERROR!! Please help

hello all
I am using OWB on Oracle9i.
Trying to map flat file (file.txt) to oracle table,
Validate: okey, some warning
Generate/Deploy: successful.
But when I check to the database sqlplus there is no rows existed. I verify that I connect to the right database.
My question is:
When doing a map from flat file to oracle table. Do I have to have some thing in the middle such as (filter, join) or I just can do a straight mapping if I don't have any condition to filter out.
Please response if you know the answer.
Your answer greatly appreciated. Thank you for your help
Regards,

If you are using an OWB version which is 9.0.3.x or earlier, to load a flat file into the database, you should generate SQL loader files and run them either manually or by using a scheduler.
The new version (9.0.4) supports external tables, so you don't have to use SQL loader. Please refer to the user manual for more details.
Regards:
Igor

4GB File Size Limit in Finder for Windows/Samba Shares?

I am unable to copy a 4.75GB video file from my Mac Pro to a network drive with XFS file system using the Finder. Files under 4GB can be dragged and dropped without problems. The drag and drop method produces an "unexepcted error" (code 0) message.
I went into Terminal and used the cp command to successfully copy the 4.75GB file to the NAS drive, so obviously there's a 4GB file size limit that Finder is opposing?
I was also able to use Quicktime and save a copy of the file to the network drive, so applications have no problem, either.
XFS file system supports terabyte size files, so this shouldn't be a problem on the receiving end, and it's not, as the terminal copy worked.
Why would they do that? Is there a setting I can use to override this? Google searching found some flags to use with the mount command in Linux terminal to work around this, but I'd rather just be able to use the GUI in OS X (10.5.1) - I mean, that's why we like Macs, right?

I have frequently worked with 8 to 10 gigabyte capture files in both OS9 and OS X so any limit does not seem to be in QT or in the Player. 2 GIg limits would perhaps be something left over from pre-OS 9 versions of your software, as there was a general 2 gig limit in those earlier versions of the operating system. I have also seen people refer to 2 gig limits in QT for Windows but never in OS 9 or later MacOS.

Generated pdf file from oracle reports show bad characters

Hello all,
Iam fighting with a problem with generated pdf file from oracle reports which show some bad characters. I was searching for some information but it didnt help...
I have Oracle Database 11g R2 (or 10g R2) on Oracle Linux or Windows, Oracle forms and reports 6i (i know that is very old and not supported with 11gr2 but we are in this scenario).
NLS parameters are set like this
server:
NLS_CHARACTERSET EE8MSWIN1250
NLS_TERRITORY AMERICA
NLS_LANGUAGE AMERICAN
client:
NLS_CHARACTERSET EE8MSWIN1250
NLS_TERRITORY SLOVAK
NLS_LANGUAGE SLOVAKIA
When I run Oracle Reports it show perfect in display and when I try to print them, they are all good with good characters, but when I try to generate pdf file, some characters like č,š,ľ are not displaying corectly... This happen only when try to generate to pdf...
I try to work with uifont.ali on client side but without any result. Fonts for reports were installed on client and server side... Can someone help me with this problem? Thank you very much for every advice.
Martin

Hi Sergiusz,
Thank you for your reply. I look at what you wrote and try to make some test...
1) For first I download FontForge, which can generate type1 font from true type. So I open FontForge and open my Arial.ttf font and use "Generate Fonts" to save my Arial.ttf font to pfb and pfm (whoch are need to set in uifont.ali). I have to change encoding, because my font has 2byte encoding so I reecondode the font from ISO10646-1 to ISO8859-2 and generate to pfb.
2) Then I navigate REPORTS_PATH from regedit to my *.pfm and *.pfb files.
3) I add these lines to end of my uifont.ali
[ PDF:Embed ]
Arial = "Arial.pfm Arial.pfb"
ArialNarrow = "ArialNarrow.pfm ArialNarrow.pfb"
4) Then I generate my report but nothing change... I check "Font used" in my pdf file, but there were not my fonts embedded I guess..
I also try PDF:Subset, but it doesnt change anything... I try PDF aliasing to see if my uifont is working - this work very well, but I dont need to change font...
Any other advice? Thank you so much to everyone!
Martin

Sending data from flat file or oracle table view to a IBM MQ

Hi,
We need a help in developing solution.
We have a scenario, where data(multiple records) in source (table/file) needs to populated into a queue(JMS IBM MQ) as a single message. To achieve this we are trying a two step process.
1)     We created a temp table to store multiple records from file, this temp table is having one column of *‘clob’* data-type which will store data from file into a single row. We are facing issue while loading data from file to staging area using LKM FILE TO ORACLE (SQLLDR)
When we are executing interface, while creating C$ table it is going error out . Instead of taking clob (target write data type) it is taking varchar with +5000+ size whereas varchar supports only *4000*.
create table SNPM.C$_0SINGLERECORD
C1_C1 VARCHAR2(5000) NULL
NOLOGGING
Error message:
910 : 42000 : java.sql.SQLException: ORA-00910: specified length too long for its datatype
java.sql.SQLException: ORA-00910: specified length too long for its datatype
Need help in sending data into destination table.
2) After populating this data into destination(temp table) as a single record we need to send each row as a single message to JMS MQ. currently we are using LKM FILE to SQL to load into Staging area and IKM SQL TO JMS APPEND to put message in JMS MQ. We are succeeding in putting message of length < 4000 as these KMs are converting the data using varchar2, but we have data of large size+(>4K)+.
Pointer/ solution will be of great help.
Please let me know in case you need more description.

The error message that is showing while using clob as datatype(which we created as user data type in data types section of respective technology)
java.lang.NumberFormatException: For input string: "4294967295"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
while using varchar2 in creating C$ table following is the error:
910 : 42000 : java.sql.SQLException: ORA-00910: specified length too long for its datatype
java.sql.SQLException: ORA-00910: specified length too long for its datatype
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)

How i will run copy the file in oracle 7.3 ?

how i will run copy the file in oracle 7.3.
new version of oracle copy function is available in util_file but in oracle 7.3 this is not available.here i am using 7.3.
please help
Thanks
Deepak S.

The technique used to be to send messages from your procedure to a waiting shellscript listener using DBMS_PIPE. You would write a script (could be ksh, Perl, Ruby etc) on the server with a loop in which it connects to the database and waits for DBMS_PIPE messages. When it gets one, it executes the command that was contained in the message and loops around to continue waiting again.
7.3 is really ancient though. If you're running it at all this far out of support it should really just be ticking over and not subject to new development.

ODI 10g R2 LKM File to Oracle (sql*ldr) ctl file

Hi,
ODI release 10.1.3.4
I need to load a file into an oracle db. For big file I use the LKM file to oracle (sql loader). It is a delimited file with ' " ' enclosed text. I give in the datasotre all parameters record separator, field separator, text delimiter, decimal separator. Despite in the control file for sql*ldr it miss the line [optionnaly enclosed '"' ] so in my db it is loading "nn" instead of nn ...
Do someone know this issue ?!
Best regards,
BL

It would be best to you look in to the LKM code to see if its even there "optionally enclosed by"
This is an old version of ODI and its quite possible that the support for this clause was not added to the step that builds the ctl file.
If its not there, then you can add it your self.

What file format Oracle Database 11g can spool data w chinese characters?

Hi,
I have a batch job that spools data into a text file for further processing but now I have data that contains chinese characters.
From what I know text file (.txt) cannot support chinese characters.
Anyone has any idea what file format Oracle Database 11g can spool data with chinese characters?
Thank you!
Regards,
Fel

I'm not sure this can work with SQL*Plus in character mode on Windows DOS mode. But this should work with SQL Developer: see Re: How to display Chinese characters in Oracle?
I can also make this work with Linux:
$ locale
LANG=fr_FR.UTF-8
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
$ cat chinese.sql
cat tchinese.sql
set echo on
spool tchinese.log
select * from v$version;
select unistr('\8349') from dual;
exit
$ cat tchinese.log
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE     10.2.0.1.0     Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> select unistr('\8349') from dual;
UNIS
草                                                                              Edited by: P. Forstmann on May 27, 2009 10:30 AM
Edited by: P. Forstmann on May 27, 2009 10:33 AM

Problems with LKM File to Oracle (SQLLDR)

Hi,
when executed the command Generate CTL file in the LKM File to Oracle (SQLLDR) I get this message:
Code:
SnpsOutFile "-File=/prueba2.ctl" "-CHARSET_ENCODING=ISO8859-1"
OPTIONS (
     SKIP=0,
     ERRORS=0,
     DIRECT=FALSE
LOAD DATA
INFILE "E:\PruebaFichero/prueba2.txt" "STR x'0D0A'"
BADFILE "/prueba2.bad"
DISCARDFILE "E:\PruebaFichero/prueba2.dsc"
DISCARDMAX 1
INTO TABLE USER_01.TC$_0PEDIDOS_CLIENTES
     C1     POSITION(1:3)
Error message:
java.io.FileNotFoundException: \prueba2.ctl (Acceso denegado)
     at java.io.FileOutputStream.open(Native Method)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:194)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:116)
     at com.sunopsis.dwg.tools.OutFile.actionExecute(OutFile.java:110)
     at com.sunopsis.dwg.function.SnpsFunctionBase.execute(SnpsFunctionBase.java:276)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3437)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1509)
     at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:44)
     at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Please, if somebody could give me a tip. Thanks!!!

Hi aetl,
The work scheme had not been stored properly...
SnpsOutFile "-File=E:\PruebaFichero/prueba2.ctl" "-CHARSET_ENCODING=ISO8859-1"
OPTIONS (
     SKIP=0,
     ERRORS=0,
     DIRECT=FALSE
LOAD DATA
INFILE "E:\PruebaFichero/prueba2.txt" "STR x'0D0A'"
BADFILE "E:\PruebaFichero/prueba2.bad"
DISCARDFILE "E:\PruebaFichero/prueba2.dsc"
DISCARDMAX 1
INTO TABLE USER_01.TC$_0PEDIDOS_CLIENTES
     C1     POSITION(1:3)
Thanks!!!
Regards.

LKM File to Oracle (SQlLDR) giving errors

Hi,
I am using ODI to load data from an ascii file ( pipe separated) to an Oracle Table. So I created a Interface with LKM as "File to Oracle (SQlLDR)" and IKM as "SQL Control Append". CKM is "CKM Oracle".
I am using ODI Studio 11g with jdk 1.6 and am trying this on my windows XP machine. I also have sqlldr installed on my local machine. But still the interface fails with an error. The interface works if i use "LKM File to SQL" but i want to use SQLLDR because i will have high volumes coming in.
Can you please help.
Interface Error on Step Call sqlldr :
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 34, in ?
Load Error: See K:\Project Galaxy\Tech Team\ODIDataFiles/NIN_GL_BALANCES.log for details
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1818)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:559)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:481)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1040)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)
Jython Code :
import java.lang.String
import java.lang.Runtime as Runtime
from jarray import array
import java.io.File
import os
import re
import javaos
def reportnbrows():
f = open(r"K:\Project Galaxy\Tech Team\ODIDataFiles/NIN_GL_BALANCES.log";, 'r')
try:
for line in f.readlines():
if line.find("MAXIMUM ERROR COUNT EXCEEDED")>=0 :
raise line
finally:
f.close()
ctlfile = r"""K:\Project Galaxy\Tech Team\ODIDataFiles/NIN_GL_BALANCES.ctl";""
logfile = r"""K:\Project Galaxy\Tech Team\ODIDataFiles/NIN_GL_BALANCES.log";""
outfile = r"""K:\Project Galaxy\Tech Team\ODIDataFiles/NIN_GL_BALANCES.out";""
oracle_sid=''
if len('')>0: oracle_sid = '@'+''
loadcmd = r"""sqlldr apps/<@=snpRef.getInfo("DEST_PASS") @>%s control="%s" log="%s" > "%s" """ % (oracle_sid,ctlfile, logfile, outfile)
rc = os.system(loadcmd)
if rc <> 0 and rc <> 2:
raise "Load Error", "See %s for details" % logfile
if rc==2:
reportnbrows()

If the log file is not created, are any of the other files getting created. eg: K:\Project Galaxy\Tech Team\ODIDataFiles/NIN_GL_BALANCES.ctl ?
If not, what is the Agent you are using to run this interface ? Local or any other ?
I can think of 2 possibilities:
1.) The user with whose credentials the agent is has been started, doesnt have permissions to write into the directory above. But if you are using a local agent, then this possibility doesnt hold.
2.) Try using K:\ProjectGalaxy\TechTeam\ODIDataFile as the path *(REMOVE THE SPACES from the directoryname)*. Create new directories without spaces.
I think the call to sqlldr is choking on these spaces.

Support 4Gb files on Oracle 9.0.1

Similar Messages

Maybe you are looking for