Support for additional apis
hello i to all
my question is that
Mobiles only support MIDP 1.0,2.0
but how these mobiles can support additional apis
like bluetooth and mmapi etc
please reply it
I do think that the j2me has some specific apis for bluetooth and mime... but the implementation of these technologies varies from cel to cel. So, you must make program including these kind of technologies but if the cell phone doesn't have this technology support in it, I'm not sure, but I do think that it'll not work. If I'm wrong in it... plz... correct me. =)
Similar Messages
-
Why is there no WSDL type support for Web Api?
So I am just getting started with .Net WebApi and one thing that I am noticing straight away is that there is no Contract defining how the Api looks and should be consumed (Request/Responses from each Action), this is usually in the form of a WSDL for WCF/Soap.
It seems to me like this is something that would be very valuable and make life a lot easier for consumers of your Api.
Is there a reason there isn't one? Is there a programming paradime or principle that I am unaware of? Is there a way I could create one?SOAP, REST AND PEOPLE'S CREATIVITY
SOAP needs a description document like WSDL because each resource can be consumed with different messages, there are no definition on the protocol about constraints to the possible names/messages that you can manipulate a resource.
For example, in SOAP your web service that allow clients manipulate an user can expose the operation that create an user in many different messages, like:
addUser
createUser
insertUser
Of course, these are just few sample messages, because I've see a lot of funny web services method names. There are really creative people out there.
In other hand, if you are exposing your underlying system using web api that really respect the REST principles, the client just need to know that you have a resource named Users, because there is 99% of chance that you can create an user in this way
POST /Users
And this occurs for each operation you want to expose using SOAP or a web api REST.
Despite being SOAP a protocol, which restricts what you can or can not do, and be REST a style architecture, which leaves many open points of how to do things. There are efforts to define conventions of how to expose and consume REST web apis.
DESCRIBING A WEB API REST
In the field of how to describe a web api REST I can cite
Swagger. It is not a attempt to create a WSDL like to web api REST, but it is a good attempt to create an open standard for describing web apis REST.
Swagger is a specification and complete framework implementation for describing, producing, consuming, and visualizing RESTful web services.
I use Swagger a lot and really love it, mainly because
Swagger UI that allow you generate a nice live console and documentation for your web api.
There are many implementations of Swagger for most of languages: C#, Java, Python, Ruby, etc.
If you are using ASP .NET Web API, there a some projects to auto generate the Swagger specification, like
Swagger.NET
GENERATING CLIENTS TO A WEB API REST
Because the constraints of REST, like the limited set of verbs (GET, POST, PUT, DELETE, etc) is not so difficuty to generate a client library to a web api REST.
Projects like
WebApiProxy can easily generate clients do C# and Javascript.
CONVENTIONS FOR WEB API REST
To keep our lifes as developers easier is good define some conventions of how our web api REST will behave, the best effort I know in this field is the very good
Apigee - Web Api Design ebook. The e-book is not an attempt to create a bible or a mantra about how to design your api, but rather a collection of conventions observed in large web REST apis, like Twitter, Facebook, Linkedin, Google, etc. -
allison.moore
Any plans for adding following objects under Bulk API V2.0 for data extraction from Eloqua. Extracting the data using the REST API for these objects makes it complicated.Thanks for quick response. Extracting these objects using REST API in depth=Complete poses lots of complication from the code perspective since these object(s) contains multiple nested or embedded objects within it. is there any guideline on how to extract these objects using REST so that we can get all the data which is required for analysis/reporting.
-
Does the BEA Portal Server support portlets written
to the proposed Portlet API?
Specifically, I've played with Jetspeed before
and have some portlets for Jetspeed. How easy
is it to port those portlets to the Portal Server?
From what I've gone through so far with the Portal
Server 7 sampleportal site and looking through the
sample code, it seems to be very different from
what I'm used to in Jetspeed.
I would appreciate any pointers on documentations
geared more for developers. While the tutorials
are useful, they are a bit light on customization.
LewI doubt it since the Portlet API isn't finalized yet, so BEA's API (along
with others) is still very proprietary.
My best guess is that it won't be compliant untill one release version after
the spec has been completly finished and accepted. 1-2 years? And that is
if BEA decides to conform to the spec at all.
"Lew Davis" <[email protected]> wrote in message
news:[email protected]..
>
Does the BEA Portal Server support portlets written
to the proposed Portlet API?
Specifically, I've played with Jetspeed before
and have some portlets for Jetspeed. How easy
is it to port those portlets to the Portal Server?
From what I've gone through so far with the Portal
Server 7 sampleportal site and looking through the
sample code, it seems to be very different from
what I'm used to in Jetspeed.
I would appreciate any pointers on documentations
geared more for developers. While the tutorials
are useful, they are a bit light on customization.
Lew -
GetRealPath("/") supported for Servlet API 2.0?
Can anyone tell me if the getRealPath("/") method is suppored in the Servlet API 2.0? Or where I can find documentation from 2.0? Thanks!
I guess a better question would be: I've written code in Servlet API 2.3 and I've been testing w/ Tomcat 4.0.3 on my local machine. Everything is fine. The people I'm developing for just got a new server (b/c their old one didn't support servlets at all) which uses JServ which only supports servlet api 2.0. Now my servlet is throwing errors. getRealPath() was returning a path in Tomcat, but now it just returns null. And getResource() doesn't seem to be a valid method in api 2.0. Is there 2.0 code that I can use instead? And if so do I need to use an older api to compile it?
-
Apia, Samoa time zone support for iCloud
There does not seem to be support for the Apia, Samoa time zone in iCloud. This is an idiosyncratic time zone being UTC +13hrs with daylight savings (UTC +14hr) during the "summer" commencing at 3am on the last Sunday in September and ceasing at 4am on the first Sunday in April.
http://www.timeanddate.com/time/zone/samoa/apia
Tonga, Tokelau and Rawaki (Kiribati) have the same time zone but no DST.
American Samoa has the same time but a day earlier and no DST.
I tried to make an Apple support request but it wants an Apple hardware ID and I'm using iCloud on a Sony Vaio.It looks like the reminders don't "float" - so all the dates and times I set for reminders while in St. Lous are reporting at weird times because of the time change from Tokyo time. Is there any way of fixing this short of resetting all the times?
Thanks,
doug -
Squiggly 0.5 now available with native support for TLF TextFlow objects!
I am happy to announce the release of Squiggly 0.5 on Adobe Labs!
The two new enhancements to this version of Squiggly are:
1. Native support for TLF TextFlow objects
Now you can add spell checking to native ActionScript applications without any dependency on Flex
2. Modularization of code for greater customizability
One of the cool things about Squiggly was the SpellUI class, which gave you a single line integration of spell checking to your Flex apps. With this release of Squiggly, we have exposed some of the sub-classes that make up SpellUI, which will allow you to further customize Squiggly's behavior. It is now much easier to write your own Squiggly UI or control how the spelling engine behaves.
Please let us know how this suites your needs, and what direction you would like to see us take this technology. Now that we have completed some critical refactoring work in the underlying technology, our next focus will be in adding support for additional languages, such as German and French.
Happy Spell Checking!
- Bruce, AdobeHI,
I need to add Squiggly to my TLF 2 editor.
Could you please tell me where I can find some samples or guidelines on how to add Squiggly 0.5 with TLF TextFlow.
Thanks -
Support for DbXml specific functionality in XQuery vs. Shell or API
Is / will there be any support for doing common commands in pure XQuery rather than just programmatically or through the shell? For example, in the shell I can create / list / delete indexes on a container, output query plans, etc. Are the same functions that are called through the shell available as XQuery functions? possibly in a dbxml function namespace?
In a related question, but possibly deserving of a new thread if it doesn't already have one - I know XQuilla has the ability to call registered external functions from parsed XQuery, is there a way to tell DbXml to register a function with XQuilla's static context before using it? that would make it possible for me to add the functionality described above myself without disturbing your distributed code.Not so handy with C++ (my everday languages are PHP and Java), but if you say it can be done then I'll take a hack at it. If you happen to have examples of how other people have done it and you could point me at them it would be marvelous.
To answer your second question: "bingo." It mostly means less interface work and brings it closer to what SQL can do in relational databases.
The project allows the end user to define their own document structures (schema definitions more or less) and then create instances of these documents in a XML editing interface. For each document type, the end user is also able to define a set of named queries (abstracted function declarations) which lets us captures business rules without customizing our PHP code. Because the structure and queries that will be used against the documents are user defined its fairly impossible for me to automatically setup adequate indexes for the container of each set of documents. So I need an interface to allow the user to create / review / delete the indexes themselves.
We've already created an interface that allows the user to execute arbitrary queries against a selected document. In the future we'd also like this same interface to do result set based content updates (through the XmlModify class) and whole document addition / replacement. So inclusion of index control makes sense as well. We can find ways to use the APIs, it just seems like this could benefit more than just our project.
Placing the functionality from the shell into xquery extension functions seems analogous to having the UPDATE, DELETE and CREATE syntaxes of SQL. -
Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this! Any one have any suggestions not being offerd by tech support or Apple? Anything at all?
mdjb wrote:
I just lost a big opportunity to get a new client because of this!! almost 24 hours now without any email service. I was one of the original.mac customers. I am over this time to move on. It is an inferior product.
My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service. -
I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed. -
GroupWise 7.0 API Gateway is supported for Exchange 2007?
Can someone confirm that GroupWise 7.0 API Gateway is supported for Exchange 2007?
I found a note in a guide that stated it was not YET supported as of 1/27/2008.bwalker2,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Revision: 10959
Author: [email protected]
Date: 2009-10-09 13:38:19 -0700 (Fri, 09 Oct 2009)
Log Message:
Adding support for FXG 2.0 additional blend modes that do not have a SWF equivalent. For the optimized FXG case, we now generate an ActionScript SymbolClass and set the corresponding blend shader. This requires checking in the additional shader classes and PBJ files, but note we do not yet use them in MXML graphics.
Note: This change does not address luminosity masks.
QE notes: Please update FXG opt. testsuites for additional blendModes.
Doc notes: No
Bugs: N/A
Reviewer: Paul
Tests run: checkintests, mustella spark/core/fxg
Is noteworthy for integration: Yes, this change includes support for the additional blendModes of FXG 2.0 (though only for the optimized FXG case, and not MXML graphics).
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/SparkClasses.as
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java
Added Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/Color.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/ColorBurn.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/ColorBurnShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/ColorDodge.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/ColorDodgeShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/ColorShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/Exclusion.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/ExclusionShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/Hue.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/HueShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/Luminosity.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/LuminosityShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/Saturation.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/SaturationShader.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/SoftLight.pbj
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/shaders/SoftLightShader.asIve resolved vertical refresh and resolution issues by declaring VideoRam value in fglrx section of my xorg.conf.
-
NLS ISO88595 support for ldap OID C API
Please Help!
How to order from Oracle Internet Directory C API to process single byte
string (ISO-8859-5) instead of
Unicode string ( in input and output parameters values ) ?
#include <ldap.h>
char* base ="cn=�������_�����, cn=com"; /* in ISO */
ldap_search_s(ld , base .... ); /* not detecting base with russian word */
How to switch NLS ISO support for ldap OID C API ?
If any other approach to solve it problem?
(for example in Oracle OCI C API it solved by setting client NLS_LANG
environment variable .
In my case NLS_LANG not working)UP plz
-
API support for color extraction feature
Is there API support for color extraction feature? if not, is
it scheduled?Hello, thanks for the post.
In order to provide the best user experience for color
extraction, we had to split the functionality between client-side
and server-side, so we are not able to offer an API for this
functionality at this time. We are, however, very interested in
feedback on what kinds of APIs are interesting to you and how you
are interested in using them, so folks, please let us know.
Current APIs, including the new Random theme browsing view
and to view comments to your themes, are available on the
kuler API
wiki. We've seen some really fabulous and creative use of the
kuler APIs, and we look forward to more.
Sami -
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks
Maybe you are looking for
-
Unable to create PDF in MS Publisher
I am attempting to create a PDF of a large, poster sized document that I created using Microsoft Publisher. The size of the MS Pub. document is 48" wide by 24" high. I am using Acrobat Pro 9 and Microsoft Office 2007. The PDF is created, unfortunatel
-
I replaced my iMac and want to put apps from my phone onto my new iMac. How do I do that?
-
HT1277 Why is mobile me no longer accepting my password?
My password still works for other application. However, mobile me no longer accepts it and no, I have not changed it nor mistyped it.
-
Crystal reports XI Release 2 constantly configuring after SP4 installed
I had this issue before and bookmarked it before SAP bought businessobjects and now that solution forum thread no longer exists. But there is some problem with updating the registry when installing sp2 or Sp4 on Crystal Reports XI 2. After the succes
-
I have a following scenario : File(Sender) ->XI->IDOC(receiver) The partner profile is defined in the receiver with a partner type of KU. However, when I run the scenario, the results in the IDOC show the partner profile with a type of LS. Where is t