Suppress the pop dialog box in ALV report
Hi Gurus,
I have developed an ALV report where we can edit the data and save to data base.
For a field, it checks the value on value table and displays a pop with error "This value does not exsit". Automatically.
I have not written an validation for this field.
When i try to close the dialoge box it does not close.
Hi,
What the field reference you have given, there is check table which it is validating for the field, check it there might be a check table.
Regards,
Madhukar Shetty
Similar Messages
-
How to suppress the Print Dialog Box?
Running an (ASP.NET /Crystal Reports 2008) application and using CrystalReportViewer control. Is there way to suppress the print dialog box when I click the print icon on the report tool bar?
Edited by: juRamz on Aug 26, 2009 2:54 PMHello,
Sort of, CR needs the info. Only option is to create your own print button that has all the info filled in. It's a Windows Framework Common dialog box that CR calls so it's the OS that is prompting for the info.
Using ReportClientDoc here's a possible solution, note that this too has a dialog box to select the printer:
private void button1_Click(object sender, System.EventArgs e) // Print To Printer button
System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
//CrystalDecisions.CrystalReports.Engine.PrintOptions newOpts = new PrintOptionsClass();
pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
rasPROpts.PrinterName = cboCurrentPrinters.Text;
rasPROpts.PaperSize = (CrPaperSizeEnum)
pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
rasPROpts.PaperSource = (CrPaperSourceEnum)
pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
// new API added to allow changing printing options
newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
newOpts.DissociatePageSizeAndPrinterPaperSize = true;
rptClientDoc.PrintOutputController.ModifyPageMargins(0, 0, 0, 0);
rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don -
Suppress the pop-up box in iCal when "The server responded with an error"
So there are tons of questions already on this site about this pop-up error in iCal when trying to connect to Google calendars or MobileMe calendars. My issue is that the connection is fine 90% of the time, but every now and then the connection fails (it checks every 5 minutes) and I get this pop-up.
Now in a perfect world, this error would not result in a pop-up that demands my immediate attention, but would fail silently and simply try again 5 minutes later. Normally Apple's software design is sensible and would do things this way, so I'm totally confused why they think a pop-up (and bouncing dock icon) is anything but annoying, especially when I know it's not a big deal and will probably connect successfully next time.
Soooo... is there a top-secret way I can suppress this pop-up box? It is one of those things that can drive one insane. I even switched to BusyCal for a while but decided it wasn't quite worth $50 just to be rid of the pop-up.Is this the pop-up you get?
The request for account “[email protected]” failed.
The server responded with
“HTTP/1.1 502 Bad Gateway”
to operation CalDAVAccountRefreshQueueableOperation.
I've never seen it before but am getting it this evening (UK time). Also if I try to log in to MMe Calendar it's not logging in but going to 'find my iPhone' like it did when Mail was mucking about a few weeks back. -
Delete the entry from dropdown list in the pop up window in ALV report
Hi All,
I have a requirement in the ALV interactive report ZMM_IMPL .If we enter selection screen parameters its displaying the first screen.If we click on 'Goods Issue' tab ,it display the pop up window for Requirement Pick list with Batch number ,Storage location and Quantity.Here we have F4 option for batch number(MCH1-CHARG) and we could see all batches (with stock and without stock) in the drop down.
Now my requirement is i would need to delete the non stock batches from drop down values.
Ex:we clich F4 in batch number field(CHARG) ,could see 4 batches Test1 ,Test2 ,Test3 and Test4 .Here Test1 ,Test2 are Batch stock and other two are Non stock batches. We could see all these batches (with and without stock) in MCHB table.Now i would need to delete non stock batches(Batch with zero qty (MCHB-CLABS = 0) from drop down.
Any idea on this.
Regards,
RpnHi,
User wants to appear only batches with stock value in the drop down .Here Batches test1, test2 , test3 have stock but test4 has no stock value. Now the requirement is if stock does not exist in any of those batches it should not appear in the drop down and propose batches based on quantity.
Batch stock value can be seen through transaction MB52 and could see only Test1.Test2 and Test3.
They have arleady code in the program for F4 help to Batch number as following,
CLEAR: lips.
REFRESH: gt_lips.
lips-vbeln = f_vbeln.
lips-posnr = f_posnr.
lips-matnr = f_matnr.
lips-werks = f_werks.
lips-lfimg = f_bdmng. "store the requirement quantity for display
lips-pstyv = f_res_del. "use to store RES or DEL "DV1K919143
CALL SCREEN '0100' STARTING AT 10 2.
for the ok code to be BT_SAVE all the validation are complete
IF g_ok_code NE 'BT_SAVE'.
f_answer = 'A'.
ENDIF.
The logic for screen '0100' as follows
PROCESS BEFORE OUTPUT.
*&spwizard: pbo flow logic for tablecontrol 'TC_LIPS'
module TC_LIPS_change_tc_attr.
*&spwizard: module TC_LIPS_change_col_attr.
loop at GT_LIPS
into GS_LIPS
with control TC_LIPS
cursor TC_LIPS-current_line.
module TC_LIPS_get_lines.
*&spwizard: module TC_LIPS_change_field_attr
endloop.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
*&spwizard: pai flow logic for tablecontrol 'TC_LIPS'
loop at GT_LIPS.
chain.
field GS_LIPS-CHARG.
field GS_LIPS-LGORT.
field GS_LIPS-LFIMG.
module TC_LIPS_modify on chain-request.
endchain.
field GS_LIPS-SELKZ
module TC_LIPS_mark on request.
endloop.
module TC_LIPS_user_command.
*&spwizard: module TC_LIPS_change_tc_attr.
*&spwizard: module TC_LIPS_change_col_attr.
MODULE USER_COMMAND_0100.
MODULE USER_COMMAND_EXIT_0100 AT EXIT-COMMAND.
process on value-request.
field gs_lips-charg module lips-charg_values.
Logic for F4 help as following
DATA: mc_object LIKE dd23l-mconame,
help_lips LIKE lips.
DATA: dseltab LIKE dselc OCCURS 10 WITH HEADER LINE.
DATA: lf_shlpname LIKE dd30v-shlpname,
lx_shlp TYPE shlp_descr_t,
ls_interface LIKE ddshiface,
lf_rc LIKE sy-subrc,
lt_retvalues LIKE ddshretval OCCURS 0,
ls_retvalue LIKE ddshretval.
help_lips = lips.
IF NOT help_lips-matnr IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = help_lips-matnr
IMPORTING
output = help_lips-matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
exit. "Ignore conversion errors "50A
ENDIF.
ELSE.
EXIT.
ENDIF.
SET PARAMETER ID 'MAT' FIELD help_lips-matnr.
SET PARAMETER ID 'WRK' FIELD help_lips-werks.
Export parameters to memory to enable search help via classes
CLEAR dseltab.
REFRESH dseltab.
dseltab-fldname = 'MANDT'.
MOVE sy-mandt TO dseltab-fldinh.
APPEND dseltab.
dseltab-fldname = 'MATNR'.
MOVE help_lips-matnr TO dseltab-fldinh.
APPEND dseltab.
dseltab-fldname = 'WERKS'.
MOVE help_lips-werks TO dseltab-fldinh.
APPEND dseltab.
dseltab-fldname = 'CHARG'.
MOVE help_lips-charg TO dseltab-fldinh.
APPEND dseltab.
EXPORT dseltab TO MEMORY ID 'DSELTAB'.
Get description for search help
mc_object = 'MCH1'.
lf_shlpname = mc_object.
CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
EXPORTING
shlpname = lf_shlpname
shlptype = 'SH'
IMPORTING
shlp = lx_shlp
EXCEPTIONS
OTHERS = 1.
Enable value copy from search help to dynpro field
READ TABLE lx_shlp-interface INTO ls_interface
WITH KEY shlpfield = 'CHARG'.
ls_interface-valfield = 'X'.
MODIFY lx_shlp-interface FROM ls_interface INDEX sy-tabix.
Start search help dialog
CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
EXPORTING
shlp = lx_shlp
TABLES
return_values = lt_retvalues
EXCEPTIONS
OTHERS = 1.
IF sy-subrc EQ 0.
READ TABLE lt_retvalues INTO ls_retvalue
WITH KEY fieldname = 'CHARG'.
IF sy-subrc EQ 0.
lips-charg = ls_retvalue-fieldval.
gs_lips-charg = ls_retvalue-fieldval.
ENDIF.
ENDIF.
How to delete entry from F4 help.Any idea?
Regards,
Reddy -
How to suppress the protocol dialog screen in ALV grid ?
To check the values in the ALV grid we make use of the method add_protocol_entry from the class interface CL_ALV_CHANGED_DATA_PROTOCOL. The coloring of the wrong cells in the ALV grid is a nice feature but the popup screen that appears on every entry that is incorrect is not so nice. Is there a possibility to suppress this dialog screen without stopping the coloring feature? Or is there an other way to get this coloring feature in the specific cells of the ALV grid. We have already tried the emphasize option in the field catalog but in this case the coloring of a cell disappears when the cursor is set on the colored field in the ALV grid.
I hope somebody can help us.
Thanks and greetings,
Ad Pegels
Suiker Unie
NetherlandsAs I understand by adding the PROTOCOL you are trying to validate some fields and display those with a different color.
Instead, if you can validate and can change the color manually I think the pop ups can be avoided. All you have to do is to add a nested internal table to the main internal table that has the display data. This nested table will be of type LVC_T_STYLE. You can add rows, one for each field that you want to display in a different color and also spcify the style in which you want to display.
Once you do that those fields should be displayed with different colors.
Regards,
Ravi
Note : Please allocate points if you find this useful. -
Suppress the Print dialog box in Air /Flex
Hello,
I am trying to print the pdf files(which is located in my system) directly in the printer without showing print dialog box .
I tried to print the screen without displaying print dialog box using flash.printJob.start2().
but am not able to print pdf files in the printer its printing dark screen only also it just printing the UIcomponent size only. its not printing all d pages available inside pdf file.
Can you please help me to resolve this issue.Hi
I tried to open a new bug report , that screen itself not displaying properly and I couldnt able to enter any comments there ,I can see only the option buttons.
and I am trying to print the documents which is having mutiple pages using flash printJob . the following code I have used . here i am trying to Print Textfield .
Could you please me how can I add document/pdf file/text file instead of TextField.
va txt:TextField = new TextField();
txt.text = "Hello Test" ;
var sheet:Sprite = new Sprite();
sheet.addChile(txt);
and in printing
If(PrintJob.start2(null,false))
PrintJob.addPage(sheet);
PrintJob.send(); -
How to Suppress the POP UP window for Print out Device
Hi All,
I have One ALV Grid report and in this report I want to SUBMIT another report which, when executes gives the POP UP window for Printer Device and sends the output to that device. if we give LOCL, sends output to Spool.
So I want to Suppress that POP UP Window and by default that POP UP window should take 'LOCL' as Printer Device.
Thanks in advance,
Helpful answer get awareded.On the submit command is a spool parameters option.
The addition WITHOUT SPOOL DYNPRO suppresses the print dialog box that is displayed as standard when you use the addition TO SAP-SPOOL.
The addition SPOOL PARAMETERS is used to transfer the print parameters in a pri_params structure that belongs to the data type PRI_PARAMS from the ABAP Dictionary.
PRI_PARAMS-PDEST specificies the output device. -
Change File Name In The "File Download" Dialog Box For Web Reports
Hi All ,
I followed the below note to change the "File Download" name.
How To Change The File Name In The "File Download" Dialog Box For Web Reports? Doc ID: Note:418366.1
However its not working. Has anyone tried this and works fine ?
Basically I wanted to change the name "rwservlet" when a report is run in an
excel format.
Rajesh Alex
Rajesh AlexHello,
Have you checked if a HTTP header "Content-disposition" is returned ?
You can use ieHTTPHEaders for IE
http://www.blunck.se/iehttpheaders/iehttpheaders.html
and
Live HTTP Headers for FireFox
https://addons.mozilla.org/en-US/firefox/addon/3829
Regards -
Supressing Parameter dialog box on Refresh Report
After some tinkering, I've figured out how to get a parameter passed from a VB.NET form to a Crystal Report:
Dim paramFields As New CrystalDecisions.Shared.ParameterFields()
Dim paramField As New CrystalDecisions.Shared.ParameterField()
Dim discreteVal As New CrystalDecisions.Shared.ParameterDiscreteValue()
paramField.ParameterFieldName = "MyDateRange"
discreteVal.Value = Common.MyDates
paramField.CurrentValues.Add(discreteVal)
paramFields.Add(paramField)
crvBalances.ParameterFieldInfo = paramFields
This works just fine when the report is first opened in the Crystal Report Viewer. If I open the report a second time, however, using a different parameter, the old data is still on the report, and when I click the Refresh button in the report viewer, up pops that Parameter dialog box. I set the option to discard any saved data when loading the report, but that didn't help at all. Is there a way to KEEP the parameter dialog box suppressed and be able to refresh the report?
I'm running Visual Studio 2008, and using the version of Crystal that comes with same. Any help anyone can provide would be greatly appreciated.I am not sure I quite understand the flow, but here is my view of it:
Load report
Enter parameters
View report
Close report
Re-load the same report
Re-use the parameters entered in (2) above
View report
For ensuring that the previous data is not on the report (e.g.; step (3)), make sure that the report is disposed correctly ( use .close and .dispose on the report object). As long as the "Saved Data" option is not enabled (see KBA 1984381), the report should not have any data on re-use.
Re-using the same parameters as you used in (2) will require that you somehow save what the user entered and on second load of the report, step (5) you enter those parameters in your code. There are no CR APIs that will do this for you.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Suppress default editor dialog box
Is there any way to suppress default editor dialog box that comes at 1st launch of Dreamweaver CS5. I need to automate some stuff and cant figure out how to handle it.
I cannot attach screenshot of this dialog box here, but it says that "Dreamweaver CS5 will set itself as Default editor for the following file types:" and gives option as jsp, asp, css etc.
Any help would be appreciated.wsalopek wrote:
Suffice it to say for the purpose of this thread that when I did the ICS "upgrade" to my Droid 4, nothing but trouble followed until I did a hard reset and had to reinstall/customize everything...lots and lots of frustration and lost time, including a whole day when my phone was not usable at all (slow/rebooting on it's own/battery running hot/high cpu usage/battery dying in 90 minutes)...and I an NOT the only one.
Anyway, my wife has a Droid 4 as well, and she is being pestered by the dialog box that keeps asking her if she wants to do the upgrade. We do NOT want that "upgrade" installed on my wife's phone, but dealing with that dialog box is getting very tiresome.
Anyone know how to suppress that dialog box so it stops popping up?
Thanks...
There is no way to do this that meets the ToS on this board (as Verizon wants everyone to be at the same software level for a particular phone model). Search forums other than this one and the Motorola one for the information you need. -
How to create check box in ALV Reports?
how to create check box in ALV Reports?
Hi
check the report BCALV_TEST_GRID_EDITABLE
or
check this report
REPORT ZRFC346_TST.
TABLES:SFLIGHT,RL034.
TYPE-POOLS:SLIS.
INCLUDE:<ICON>,<SYMBOL>.
DATA: G_REPID LIKE SY-REPID,
G_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
G_IT_SORT TYPE SLIS_T_SORTINFO_ALV,
G_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_TABNAME_HEADER TYPE SLIS_TABNAME,
G_TABNAME_ITEM TYPE SLIS_TABNAME,
G_KEYINFO TYPE SLIS_KEYINFO_ALV,
G_VARIANT LIKE DISVARIANT,
G_EXTAB TYPE SLIS_T_EXTAB,
I_SLIS_EXIT_BY_USER TYPE SLIS_EXIT_BY_USER.
DATA: XEVENT TYPE SLIS_T_EVENT,
AEVENT TYPE SLIS_ALV_EVENT,
VARIANT LIKE DISVARIANT,
LAYOUT TYPE SLIS_LAYOUT_ALV,
ASP_GROUP TYPE SLIS_SP_GROUP_ALV,
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
EXTAB TYPE SLIS_T_EXTAB WITH HEADER LINE,
XFIELD TYPE SLIS_T_FIELDCAT_ALV,
AFIELD TYPE SLIS_FIELDCAT_ALV,
G_SUCOMM LIKE SY-UCOMM,
G_SELFLD TYPE SLIS_SELFIELD.
DATA: SAV_SY_REPID LIKE SY-REPID.
CONSTANTS: CON_SFLIGHT TYPE LVC_FNAME VALUE 'SFLIGHT',
CON_DISPLAY_FULL TYPE I VALUE 3.
Data to be displayed
DATA: BEGIN OF GT_SFLIGHT OCCURS 0.
INCLUDE STRUCTURE SFLIGHT.
DATA:ACTIVATE(1).
DATA: END OF GT_SFLIGHT.
INITIALIZATION.
*........Initialisierung...............................................
PERFORM INITIALIZATION_RL034.
*........Field cata....................................................
PERFORM FIELD_CAT.
*........SPECIAL GROUP.................................................
PERFORM E07_SP_GROUP_BUILD USING GT_SP_GROUP[].
START-OF-SELECTION.
Selection
SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
*........ALV CALL.......................................................
PERFORM ALV_CALL.
PERFORM USER_COMMAND_LOCAL USING G_SUCOMM G_SELFLD.
FORM USER_COMMAND_LOCAL *
--> G_UCOMM *
--> G_SELFIELD *
FORM USER_COMMAND_LOCAL USING G_UCOMM LIKE SY-UCOMM
G_SELFIELD TYPE SLIS_SELFIELD.
CASE G_UCOMM.
WHEN 'ACT'.
ENDCASE.
ENDFORM.
FORM ALV_CALL *
FORM ALV_CALL.
Call ABAP List Viewer (ALV)
G_LAYOUT-BOX_FIELDNAME = 'ACTIVATE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_BYPASSING_BUFFER = SPACE
I_BUFFER_ACTIVE = SPACE
I_CALLBACK_PROGRAM = SAV_SY_REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_LOCAL'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = 'SFLIGHT'
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = G_LAYOUT
IT_FIELDCAT = XFIELD[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS = GT_SP_GROUP[]
IT_SORT =
IT_FILTER =
IS_SEL_HIDE = 'X'
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = XEVENT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = GT_SFLIGHT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM status *
--> EXTAB *
FORM STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STAT' EXCLUDING EXTAB.
ENDFORM. " STATUS
*& Form INITIALIZATION_RL034
text
--> p1 text
<-- p2 text
FORM INITIALIZATION_RL034.
SAV_SY_REPID = SY-REPID.
ENDFORM. " INITIALIZATION_RL034
*& Form DEFINE_EVENTS_RL034
text
--> p1 text
<-- p2 text
FORM DEFINE_EVENTS_RL034.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = XEVENT.
exceptions
list_type_wrong = 1
others = 2.
ENDFORM. " DEFINE_EVENTS_RL034
*& Form FIELD_CAT
text
--> p1 text
<-- p2 text
FORM FIELD_CAT.
DATA: LS_FCAT TYPE SLIS_FIELDCAT_ALV,
L_LIN TYPE I.
REFRESH XFIELD.
1. per Default eingeblendete Felder *
*........Ikone/Symbol..................................................
CLEAR AFIELD.
DATA: LS1_FCAT TYPE SLIS_FIELDCAT_ALV,
L_LIN1 TYPE I.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = CON_SFLIGHT
I_BYPASSING_BUFFER = SPACE
I_BUFFER_ACTIVE = SPACE
CHANGING
CT_FIELDCAT = XFIELD
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
DESCRIBE TABLE XFIELD LINES L_LIN1.
ADD 1 TO L_LIN1.
CLEAR LS_FCAT.
LS1_FCAT-FIELDNAME = 'ACTIVATE'.
LS1_FCAT-CHECKBOX = 'X'.
LS1_FCAT-KEY = 'X'.
LS1_FCAT-INPUT = 'X'.
LS1_FCAT-EDIT = 'X'.
LS1_FCAT-INTTYPE = 'C'.
LS1_FCAT-DATATYPE = 'CHAR'.
LS1_FCAT-INTLEN = 1.
LS1_FCAT-COL_POS = L_LIN1.
LS1_FCAT-SELTEXT_S = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_M = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_L = LS1_FCAT-FIELDNAME.
LS1_FCAT-SP_GROUP = 'A'.
APPEND LS1_FCAT TO XFIELD.
ADD 1 TO L_LIN.
ENDFORM. " FIELD_CAT
FORM E07_SP_GROUP_BUILD USING E07_LT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV.
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = 'SPECIAL'.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
ENDFORM.
Regards
Shiva -
How to dispose the modal dialog box
hi all
can any one please tell me how to supress the modal dialog box.
Means iam triggering the a new pop up (modal dialog box) after this
when iam click ok or cancel buttons on this modal dialog box it is not returing to
the screen from where it is tiggering. Can any one tell how to achieve this.
what r the statements i have to write for this in the PAI.HI,
in PAI u have to write like..
CASE OK_CODE.
WHEN 'OK'.
UR CODE.........
WHEN 'CANC'.
SET SCREEN 0.
LEAVE SCREEN.
OR
LEAVE TO SCREEN XXX. " UR CALLING SCREEN NUMBER
ENDCASE.
Pls close the thread if the problem is solved and reward to all helpful answers.
Regards
SAB -
How to Change the position of Column in ALV report
Hi Follks,
Is is possible to change the position of column in ALV report?.If yes then how?
Basically my requirement is, that user want afacility where , he should be able to change the position
of column aftre he runs the report.
Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should
be able to drag column 5 at position 2 and vice versa.
Please help me, how to solve this issue.
Note : I am using NW 7.0 SP 9
Regards
PG
Edited by: PG on Apr 13, 2009 11:10 AMHI PG,
do below whie filling the filed catlog
wa_fieldcat-fieldname = 'Field1".
wa_fieldcat-COL_POS = '1',
append wa_fieldcat to it_fieldcat.
wa_fieldcat-fieldname = 'Field2".
wa_fieldcat-COL_POS = '2',
wa_fieldcat-fieldname = 'Field3".
wa_fieldcat-COL_POS = '3',
Thanks! -
How doi print Any variable at the end of page in ALV report?
Hi,
Anyone can tell me that How do i print Any variable at the end of page in ALV report?
Exmale: at the ende of alv report i want to print total no of employee who has taken house loan or education loan.Hi,
Go through these links
Thread in sdn regarding FOOTER IN ALV
[ALV FOOTER;
Wiki in sdn regarding HEADER AND FOOTER IN ALV
[https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP%20Objects%20-%20ALV%20Model%20-%20Using%20Header%20and%20Footer]
Header and Footer in ALV
[http://www.sap-img.com/abap/test-alv-display-with-header-footer.htm]
Hope this helps.
Thank you,
Pavan. -
This is not a question. I believe I've found a new issue and the fix for it.
The situation:
A brand new iMac 27" running Yosemite 10.10.1
MacMini server running 10.8.5 server.
The issue:
Client on iMac trying to work on MS Word documents stored on server was requiring him to save the documents to his desktop and then copy them back to the folder on the server. The exact error message was, "This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box."
The issue is unique to this computer in an office of 10 client computers and three servers.
Attempted fixes:
Verified that the ".Temporaryitems" folder existed and the permissions were set properly.
Repaired permissions on the client and the network share.
Definitive fix:
By default, Yosemite 10.10.1 uses SMB for connecting file shares. When I overrode the default and switched to AFP protocol, the issue went away.
I hope this helps someone else.
RobThat was it. What an operating system. It is very helpful to view files you are looking for. But if you have preview on you cannot save files.
Maybe you are looking for
-
How can I get rid of a split screen?
When I use my bookmarks I get the web site on the left side of the screen and fire fox opening page on the right side of the screen
-
C4780 ENV Printing in middle instead of the side as hardware requires
c4780 ENV Printing in middle instead of the side as hardware requires. is this a problem with the new dirvers? it started happening right after driver update.
-
I have this image on index, however image appears with border, I try to take a snapshot but do not show border, how can i take that out? Message was edited by: Alexandre Pereira
-
Where Can I Find My Elements Serial Number?
It came on the box but I lost the box and never registered it and my computer needs it to let me into Elements.
-
CS4 + 10.6.5 - Delete Photoshop Settings file?
I'm having major issues when starting Photoshop CS4 on an iMac running OS X 10.6.5. My keyboard almost becomes "stuck" and invokes strange actions. I am using Spaces and using the Option key + arrow key to move between Spaces. Tried opening up Fire