Suppress default editor dialog box

Is there any way to suppress default editor dialog box that comes at 1st launch of Dreamweaver CS5. I need to automate some stuff and cant figure out how to handle it.
I cannot attach screenshot of this dialog box here, but it says that "Dreamweaver CS5 will set itself as Default editor for the following file types:" and gives option as jsp, asp, css etc.
Any help would be appreciated.

wsalopek wrote:
Suffice it to say for the purpose of this thread that when I did the ICS "upgrade" to my Droid 4, nothing but trouble followed until I did a hard reset and had to reinstall/customize everything...lots and lots of frustration and lost time, including a whole day when my phone was not usable at all (slow/rebooting on it's own/battery running hot/high cpu usage/battery dying in 90 minutes)...and I an NOT the only one.
Anyway, my wife has a Droid 4 as well, and she is being pestered by the dialog box that keeps asking her if she wants to do the upgrade. We do NOT want that "upgrade" installed on my wife's phone, but dealing with that dialog box is getting very tiresome.
Anyone know how to suppress that dialog box so it stops popping up?
Thanks...
There is no way to do this that meets the ToS on this board (as Verizon wants everyone to be at the same software level for a particular phone model).  Search forums other than this one and the Motorola one for the information you need.

Similar Messages

  • Suppress pop up dialog boxes on error

    Hi, I was wondering if there is a way to suppress the error dialog boxes that appear when calling interface type commands. For example, I'm calling the TCP/IP Open command and if the port is not avaible it throws up a dialog box with an error stopping execution. I want to handle the error without stopping so I can report the error manually. I'm sure there is a way to suppress this from happening. Usually the general error handler is for showing the dialog errors if you want them.
    Thanks...
    Solved!
    Go to Solution.

    QRP wrote:
    That was a rude response! All I want to do is handle the error coming out of the TCP/IP open command without the error dialog box coming up, I still want the error reported though the error out, but just not the dialog. Whether it takes turning off the auto error reporting or not, I could really care less as long as the dialog box is not thrown. BTW, the only reason I turned off the auto reporting Altenbach is because someone else mentioned it previously that it might be causing the error dialog.
    What Altenbach is saying is if the error dialog is coming up, then, by definition you have an unhandled error. It is virtually impossible to handle an error if you are not capturing it, and you cannot capture it if you don't have something coming out of the error out terminal. The only way this dialog is shown is because you do not have an error out terminal wired, so the LabVIEW handling takes over. When a default error dialog comes up, it is basically to tell you you have an unhandled error.
    CLA, LabVIEW Versions 2010-2013

  • How to suppress the Print Dialog Box?

    Running an (ASP.NET /Crystal Reports 2008) application and using CrystalReportViewer control. Is there way to suppress the print dialog box when I click the print icon on the report tool bar?
    Edited by: juRamz on Aug 26, 2009 2:54 PM

    Hello,
    Sort of, CR needs the info. Only option is to create your own print button that has all the info filled in. It's a Windows Framework Common dialog box that CR calls so it's the OS that is prompting for the info.
    Using ReportClientDoc here's a possible solution, note that this too has a dialog box to select the printer:
    private void button1_Click(object sender, System.EventArgs e) // Print To Printer button
        System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();               
        PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
        CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
        //CrystalDecisions.CrystalReports.Engine.PrintOptions newOpts = new PrintOptionsClass();
        pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
        rasPROpts.PrinterName = cboCurrentPrinters.Text;
        rasPROpts.PaperSize = (CrPaperSizeEnum)
            pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
        rasPROpts.PaperSource = (CrPaperSourceEnum)
            pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
        // new API added to allow changing printing options
        newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
        newOpts.DissociatePageSizeAndPrinterPaperSize = true;
        rptClientDoc.PrintOutputController.ModifyPageMargins(0, 0, 0, 0);
        rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
        MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
    Thank you
    Don

  • How to suppress Output Type dialog box at printing time

    Hi all,
       Can anybody tell me how to suppress the dialog box of Output Type at the time of Print and Print Preview of Smartform through transaction? I mean there will be default for Print or Print Preview.
    Thanks,
    Manas

    hi,
    try with this
    gs_control-no_dialog = 'X'.
    gs_control-preview = 'X'.
    gs_control-no_open = 'X'.
    gs_control-no_close = 'X'.
    call function 'SSF_OPEN'
    exporting
    control_parameters = gs_control
    exceptions
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    others = 5.
    if not sy-subrc is initial.
    exit.
    endif.
    then call smartform function module after that
    call function 'SSF_CLOSE'.
    Regards
    vasu

  • In the expression editor dialog box my TAB key doesn't function correctly

    This is bizarre behavior that seems to have started recently.
    In Visual Studio 2012, an SSRS project, any expression editor dialog:
    The tab key doesn't work right.
    Open the expression editor and:
    * I see a blinking cursor and I can type in the expression box.
    * If I hit the tab key, the cursor disappears and I cannot type.  I appear to lose focus in the editor but focus doesn't appear to go anywhere else in the dialog box.
    * If I hit the tab key a 2nd time, the cursor is still gone and I cannot type. 
    * If I hit the tab key a 3rd time, I can finally type again and note that I am now
    3 tabstops in.  In other words it seems like the tabs were working but I lost the ability to type anything until I "tab" 3 magical times. 
    I can work around this by hitting tab key then grabbing the mouse and clicking where the cursor SHOULD be which returns focus to the text area.
    Hopefully this image helps clarify:
    Anybody know what is wrong?
    Microsoft Visual Studio Professional 2012
    Version 11.0.61030.00 Update 4
    Microsoft .NET Framework
    Version 4.5.50709
    Installed Version: Professional
    LightSwitch for Visual Studio 2012   04938-004-0034007-02367
    Microsoft LightSwitch for Visual Studio 2012
    Office Developer Tools   04938-004-0034007-02367
    Microsoft Office Developer Tools
    Team Explorer for Visual Studio 2012   04938-004-0034007-02367
    Microsoft Team Explorer for Visual Studio 2012
    Visual Basic 2012   04938-004-0034007-02367
    Microsoft Visual Basic 2012
    Visual C# 2012   04938-004-0034007-02367
    Microsoft Visual C# 2012
    Visual C++ 2012   04938-004-0034007-02367
    Microsoft Visual C++ 2012
    Visual F# 2012   04938-004-0034007-02367
    Microsoft Visual F# 2012
    Visual Studio 2012 Code Analysis Spell Checker   04938-004-0034007-02367
    Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
    Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
    The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
    Visual Studio 2012 SharePoint Developer Tools   04938-004-0034007-02367
    Microsoft Visual Studio 2012 SharePoint Developer Tools
    ASP.NET and Web Tools   2012.3.41009
    Microsoft Web Developer Tools contains the following components:
    Support for creating and opening ASP.NET web projects
    Browser Link: A communication channel between Visual Studio and browsers
    Editor extensions for HTML, CSS, and JavaScript
    Page Inspector: Inspection tool for ASP.NET web projects
    Scaffolding: A framework for building and running code generators
    Server Explorer extensions for Windows Azure Web Sites
    Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Windows Azure
    Color Theme Designer   1.0
    Designer for creating new color themes
    NuGet Package Manager   2.8.50126.400
    NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
    PreEmptive Analytics Visualizer   1.0
    Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
    SQL Server Analysis Services   
    Microsoft SQL Server Analysis Services Designer 
    Version 11.0.3369.0
    SQL Server Data Tools   11.1.40706.0
    Microsoft SQL Server Data Tools
    SQL Server Integration Services   
    Microsoft SQL Server Integration Services Designer
    Version 11.0.3369.0
    SQL Server Reporting Services   
    Microsoft SQL Server Reporting Services Designers 
    Version 11.0.3369.0
    BIDSHelper
    BIDS Helper 2012 - An add-in to extend SQL Server Data Tools - Business Intelligence (SSDTBI formerly BI Development Studio)
    (c) 2014 Version 1.6.6.0
    http://www.codeplex.com/bidshelper
    SQL Prompt 6
    For more information about SQL Prompt, see the Red Gate website at
    http://www.red-gate.com
    For customer support, call 1-866-733-4283.
    Copyright © 2006–2009 Red Gate Software Ltd

    Hi Bostaevski,
    Thank you for posting in MSDN forum.
    According to your description, as you said that the cursor disappears and cannot type issue. It seems that the issue may be not Visual Studio the VS IDE issue.
    In addition, I find a similar thread about the
    Expression Editor Cursor Issue,
    please see:  
    http://www.beta.microsoft.com/VisualStudio/feedbackdetail/view/780682/vs-2012-rdlc-expression-editor-cursor-issue#.
    Therefore, I suggest you could also try to press alt with left and right arrow keys and check if it is works fine.
    Thnank for your understanding!
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Suppressing smartforms Print dialog box

    Hi,
      I want to suppress Print Dialog Box in smartform and directly go to print preview. I have set the CONTROL_PARAMETERS ,NO_DIALOG to 'X' and PREVIEW 'X' but still print dialog box is not suppressed. i even set OUTPUT_OPTIONS-TDDEST but it disappear and each time it display the print dialog with output device(TDDEST) field empty.
    Thanks in advance.

    Hi,
    Chek this sample program in 4.7:SF_EXAMPLE_03
      control-no_dialog = 'X'.
      control-preview   = 'X'.
      control-no_open   = 'X'.
      control-no_close  = 'X'.
      call function 'SSF_OPEN'
        exporting
    *     ARCHIVE_PARAMETERS       =
    *     USER_SETTINGS            = 'X'
    *     MAIL_SENDER              =
    *     MAIL_RECIPIENT           =
    *     MAIL_APPL_OBJ            =
    *     OUTPUT_OPTIONS           =
          control_parameters       = control
    *   IMPORTING
    *     JOB_OUTPUT_OPTIONS       =
        exceptions
          formatting_error         = 1
          internal_error           = 2
          send_error               = 3
          user_canceled            = 4
          others                   = 5.
      if sy-subrc <> 0.
    *   error handling
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        exit.
      endif.
    *   now call the generated function module
        call function fm_name
             exporting
    *                   archive_index        =
    *                   archive_parameters   =
                        control_parameters   = control
    *                   mail_appl_obj        =
    *                   mail_recipient       =
    *                   mail_sender          =
    *                   output_options       =
    *                   user_settings        = 'X'
                        customer          = customer
                        bookings             = bookings
                        connections          = connections
    *        importing  document_output_info =
    *                   job_output_info      =
    *                   job_output_options   =
             exceptions formatting_error     = 1
                        internal_error       = 2
                        send_error           = 3
                        user_canceled        = 4
                        others               = 5.
        if sy-subrc <> 0.
    *     error handling
          message id sy-msgid type sy-msgty number sy-msgno
                  with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        endif.
      endloop.
      call function 'SSF_CLOSE'
    *   IMPORTING
    *     JOB_OUTPUT_INFO        =
        exceptions
          formatting_error       = 1
          internal_error         = 2
          send_error             = 3
          others                 = 4.
      if sy-subrc <> 0.
    *   error handling
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    * analyse internal error table of Smart Forms
      call function 'SSF_READ_ERRORS'
           importing
                errortab = errtab.
      if not errtab is initial.
    *   add your handling
      endif.
    I hope this will work.
    Regards,
    Anjali

  • Make magic mouse default to dialog box

    Is there a way to force magic mouse to automatically place itself over the default hot button when I open a dialog box? I remember being able to do that in windows years ago.. Scirpt? Setting? Tweak?  Anything... would sure save time and motion.
    Thanks!

    This is what I want:
    https://www.macupdate.com/app/mac/14845/lazymouse
    But it doesn't seem to be available anymore...

  • Suppress the pop dialog box in ALV report

    Hi Gurus,
    I have developed an ALV report where we can edit the data and save to data base.
    For a field, it checks the value on value table and displays a pop with error "This value does not exsit". Automatically.
    I have not written an validation for this field.
    When i try to close the dialoge box it does not close.

    Hi,
    What the field reference you have given, there is check table which it is validating for the field, check it there might be a check table.
    Regards,
    Madhukar Shetty

  • Suppress the Print dialog box in Air /Flex

    Hello,
    I am trying to print the pdf files(which is located in my system) directly in the printer without showing print dialog box .
    I tried to print the screen without displaying print dialog box using flash.printJob.start2().
    but am not able to print pdf files in the printer its printing dark screen only also it just printing the UIcomponent size only. its not printing all d pages available inside pdf file.
    Can you please help me to resolve this issue.

    Hi
    I tried to open a new bug report , that screen itself not displaying properly and I couldnt able to enter any comments there ,I can see only the option buttons.
    and I am trying to print the documents which is having mutiple pages using flash printJob . the following code I have used . here i am trying to Print Textfield .
    Could you please me how can I add document/pdf file/text file instead of TextField.
    va txt:TextField = new TextField();
    txt.text = "Hello Test" ;
    var sheet:Sprite = new Sprite();
    sheet.addChile(txt);
    and in printing
    If(PrintJob.start2(null,false))
    PrintJob.addPage(sheet);
    PrintJob.send();

  • Can I suppress sign in dialog box?

    We are deploying Adobe CC in an enterprise setting...labs..ect.  We are using the Packing Tools for deployment.  However, when you start up a CC application it prompts you to sign into your creative account.  We want to suppress that window when someone starts the application.  We have attempted to use the Provisioning tool, however the option regsuppress=ss does not seem to disable the sign in window. 
    Here is the Prov command we are using:
    adobe_prtk --tool=VolumeSerialize --generate --serial= --regsuppress=ss --eulasuppress --locales=en_US
    No issues generating the XML file
    Lab Environment
    Windows 8.1
    Adobe Creative Cloud Enterprise Edition

    Team Installer http://forums.adobe.com/thread/1363686?tstart=0
    http://helpx.adobe.com/creative-cloud/packager.html
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • How to suppress print dialog box from popping up under a condition

    Greetings...
    There may be a better way to accomplish what I'm trying to do, so I'm open to outside-the-box suggestions.
    I have a pretty simple page which lists a set of statuses and descriptions of each. The user can edit these status flags and their descriptions on the page as well. When I view the page in "printer friendly" mode, I see a nice simple report of what the statuses are and their descriptions. Everything works great so far.
    In our work request system built in ApEx, there's a page where someone can view the details of a work request, including the current status. When someone clicks on the help of that item, what I'd love to do is simple show the "printer friendly" version the status page mentioned above in a pop up window. My problem is that the print dialog box automatically shows up when a page is displayed in "printer friendly" mode and I do not want this to happen in this case.
    I see the javascript code in the Printer Friendly page template which causes the print dialog box to show up automatically, but I don't want to remove it in the template just for this one case. This would suppress the print dialog box on all "printer friendly" page views and the users are used to it showing up when they ask to print the page.
    I guess I could create a custom request to pass to the master status page which would pretty much do everything that the "printer friendly" mode is doing, but that seems like a lot of work when I'm so close to using something that is built in.
    Am I not seeing some simple other way of doing it or perhaps asking too much? Any suggestions?
    Shane.

    Hi,
    I think you have to call the FM GET_PRINT_PARAMETERS and pass NO_DIALOG = 'X'.
    Something like:
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          no_dialog      = 'X'
        IMPORTING
          out_parameters = ls_params
          valid          = lv_valid
        EXCEPTIONS
          OTHERS         = 1.
      NEW-PAGE PRINT ON PARAMETERS ls_params NO DIALOG.
    * Display Table
      lr_table->display( ).
    add: Spool numbers can be found in TSP01 or in system field SY-SPONO available in the submitting program...
    Hope it helps,
    Kr,
    m.
    Edited by: Manu D'Haeyer on Sep 28, 2011 10:02 AM

  • In Object Properties dialog box, modify "tab path"...

    For FrameMaker versions up to and including 8 (and I suspect 9).
    Select a graphic, then click in sequence
    ESC g o to open the
    Object Properties dialog box. By default the dialog box opens with the insertion point in the
    Width text entry area.
    Now press TAB four times: The insertion point moves sequentially to the
    Height,
    Top,
    Left, and then
    Color text entry areas.
    I wish the last movement, to the
    Color text entry area, was replaced with movement to the
    Percent text entry area. This would enable me to use the keyboard to efficiently configure the size, position, and scaling of a graphic.
    As it is, I virtually never need to select the graphic's
    Color text entry area and the movement of the insertion point to that essentially useless tool drives me crazy: It makes me TAB all the way 'round the dialog box or grab the pointing device to get it to the
    Percent text entry area...
    Cheers,
    Riley

    Odd... What does your properties dialog look like? Can you post a screenshot of the dialog box? Also, what version of LabVIEW are you running?
    Message Edited by smercurio_fc on 06-03-2008 04:56 PM

  • How to suppress Compare documents dialog in Acrobat 8 using Visual Basic

    Hi,
    We are having one utility developed in VB and we are using this to compare PDF documents with Adobe 8.0.
    Before comparing the PDFs,first Compare Documents dialog is displayed and then we have to say OK. Then,
    mismatches between the documents is shown. I want to suppress the Compare dialog box and is there anyway
    in VB to suppress the compare dialog and to click on OK programmatically.
    Thanks for your Help in advance.
    Raju

    No there is nothing in the API that allows you to automate the pushing of buttons in the UI. You could try and use something like SendKeys to see if it worked but a word of warning. Doing so would be a real HACK and totally unsupported.
    Sabian

  • Crystal 10 RCD and Windows (Advanced) Print Dialog Box

    Years ago I wrote a Crystal Viewer program and Crystal Support showed me how to change the Viewer Print Dialog box so it would use the Advanced Print Dialog (I believe it used the Windows Print Dialog). Does anyone know how to set the RDC Viewer to use a Print Dialog that allows changing the printer and not just the default Print Dialog box that only shows settings for the default windows printer? I no longer have the source code for the program I wrote before and can't remember what to set and I have now written a new Viewer that I want to include the ability to change printers.

    Ahhh, what you're looking for is descibed in note #[1212245|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] - How to use the Printer Setup dialog box.
    Ludek

  • Field Tree Dialog box - Detached

    Here's my problem,  I accidently clicked and dragged the field tree dialog box in the editor and detached it from the main editor dialog box and now it just kind of floats out there.  I work with two monitors and now when I open the editor, I get the editor dialog box on one screen and my field tree dialog box on the other.  I know that I have done this before and never found a solution.  Luckily we had an upgrade to Crystal and the reinstall fixed my problem.  But alas, I have done it again.  Does anyone know if there is anyway besides a reinstall to fix this problem?

    Hi -
    Thanks for your fast response.  When I right click on the top bar where it says Field Tree I get this menu:  Restore, Move, Minimize, Maximize and Hide.  If I right click on the bottom bar of the Field Tree or in the dialog box, I get the options to Allow Docking, Hide, Find in Formulas.  So I click on u2018Allow Dockingu2019 - nothing happens.  Then I double click on the dialog box and nothing happens either.  I can still move the Field Tree box anywhere, but can't seem to dock it.  It seems like the u2018Allow Dockingu2019 option is for an item in the Field Tree and not really for the box itself. 
    Can you tell what I am doing wrong?

Maybe you are looking for