Supress Warning on SQLPLUS output

Hello!
So, how can i supress warnings on sql plus output?
Let me explain
I have a install script with procedures and somethings have error dependences, this is ok, but i would like remove the "Warning: Procedure created with compilation errors" when execute.
Now, my header is
set verify off
set head off
set echo off
set feedback off
ALTER SESSION SET PLSQL_WARNINGS='DISABLE:ALL';
Thanks for help
Best regards
Felipe.

sb92075 wrote:
when all else fail Read The Fine Manual
http://download.oracle.com/docs/cd/E11882_01/server.112/e16604/ch_twelve052.htm#i2700066
WHENEVER SQLERROR WARNING CONTINUESb, thanks for your reply
But the WARNING clause works only with EXIT.
I've tried WHENEVER, ALTER SESSION and DBMS_WARNING but without sucess.
Regards,
Felipe.

Similar Messages

How to format sqlplus output

In previous OTN Forum format we used {code} to format sqlplus output , how to do in this version ?

Click on "Use Advanced Editor".
Highlight your code.
Click on the symbol >>
Select Syntax Highlighting
Select SQL...output looks like below:
select sysdate from dual;

FORMATTING SQLPLUS OUTPUT

I am running a shell script
shell script
#!/bin/sh
sqlplus /nolog <<EOF>/ora01/file1
CONNECT aaa/bbb@abc
select table_name from user_tables;
exit
EOF
output
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Sep 13 17:01:53 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected.
SQL> SQL> SQL> SQL> SQL>
COUNTRIES
REGIONS
JOBS
JOB_HISTORY
EMPLOYEES
DEPARTMENTS
LOCATIONS
SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
desired result
COUNTRIES
REGIONS
JOBS
JOB_HISTORY
EMPLOYEES
DEPARTMENTS
LOCATIONS
how can i format my sqlplus output so that my desired result is as above.
Thanks!

Yes, this seem to work, however, only if connect is done not from within sqlplus but from the shell prompt.
~ >cat s.sh
#!/bin/sh
sqlplus -s scott/tiger <<EOF
set term off feed off head off pages 0
select table_name from user_tables;
exit
EOF
~ >./s.sh
DEPT
EMP
BONUS
SALGRADE
SCHEME_CBFOWF1
DR$SCHEME_CBFOWF1_IDX$I
DR$SCHEME_CBFOWF1_IDX$R
PROVATAB1
DR$PROVAINDEX1$I
DR$PROVAINDEX1$R
CREATE$JAVA$LOB$TABLE
X
SYS_IOT_OVER_57950
SYS_IOT_OVER_57953
JAVA$OPTIONS
PROVA1
DR$PROVAINDEX1$N
DR$PROVAINDEX1$K
DR$SCHEME_CBFOWF1_IDX$N
DR$SCHEME_CBFOWF1_IDX$KBest regards
Maxim

Supress warning message in Query Analyzer after free characteristic removed

Hi
I have a query and several workbooks looking to the same query.
When I remove a free characteristic from the query (not the cube) I am presented with a warning message when opening Analyzer indicating that the removed field is no longer available on the report.
Is there any way to supress these warning messages? I am aware of the option Settings > Supress warnings from server but I would not want to ask every people to do this in the company. Is there a way I can supress the warning from the query?
We are running 3.x for this particular query and report.
Thanks

Hi,
In RSRT, you have an option for the suppressing the messages.
Have a look on the below link -
http://wiki.sdn.sap.com/wiki/display/BI/SuppressquerymessagesusingRSRT
Regards,
Geeta

Supressing warning messages

Hi,
Whenever we create a condition, warning messages appear while running the query like ' condition created on..'
How to supress those warning messages.
Regards

Hi,
Go to RSRT t.code , give your query name and there will be icon called 'message' in the top, click over there and then click 'others' button in left hand side and you will find a warning message with message no in righthand side ..
You can checkmark the box which you doesn't want to display in the query and save it.
Regards,
Siva.

Supress warning msg during RRI

We have a query that jumps to R/3 tcode. when we try to jump, for some document no's the jump goes smooth .. for some other doc's, it throws a warning msg saying that the infosource is not linked to the source system. this happnes with some of the docs only. But the jump does go thru to R/3.
I want to supress the warning msg during the jump. I tried in RSRT, but it doesnt help. the error code i get is RSBBS206. where do i have to exactly supress this warning?
Any pointers or clues would be appreciated.
thanks,
Voodi

Hi Vodi,
In RSBBS, go to the sender query in change mode. There should be a tab in the middle column where you have to give your infosource name..
For. eg If you want to jump from Cost centre report (BW) to Masterdata transaction in R/3, you ust assign this particular infosource in RSBBS settings..
Hope it helps.

Dbms_output.put_line and sqlplus : output truncated to 100 Characters.

HI all,
please see the following script where the variable length is more than a 100 charecters...
When i run this in sqlplus with SERVEROUTPUT ON, i see the ouput being truncated to 100 charecters.
sql> ed
Wrote file afiedt.buf
1 declare
2     l_var varchar2(400);
3 begin
4     l_var := 'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefgh
5     dbms_output.put_line(length(l_var));
6     dbms_output.put_line(l_var);
7* end;
8 /
130
abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvI think I am looking for a sqlplus "SET XXXX..." command, but my search has been futile so far.
Please advice.
Thanks,
John.

Thanks for your reply .. Frank.
Sorry... I Previewed the post but did not notice my code being truncated in my sqlplus sesssion.
The actual script has the output to 130 charecters. but when i close the edit (afeidt.buf) and execute it, the display only shows 100 charecters...
My SQLPLUS version is 9.2.0.1.
I am using the "WE8ISO8859P1" charecter set.
declare
    l_var varchar2(500) := 'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz';
begin
    dbms_output.put_line(length(l_var));
    dbms_output.put_line(l_var);
end;
130
abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuv
1 declare
2      l_var varchar2(500) ;
3 begin
4      for i in 1 .. 5 loop
5          l_var := l_var || 'abcdefghijklmnopqrstuvwxyz';
6      end loop;
7      dbms_output.put_line(length(l_var));
8      dbms_output.put_line(l_var);
9* end;
sql> /
130
abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuv

SqlPlus, output to file ONLY?

Hey,
I use SPOOl to write my output to a file but i dont want the result to be printet in the terminal.
Is there a way to do this?
Thanks
//Kenny

Hi,
782069 wrote:
Hello and sorry for my late response,
I call the script with the following command:
sqlplus user/pass@database @/path/to/script
Let's say in the script.sql there's a sql query like this:
select * from table;
exit;
Then the out put would be:
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jul 21 09:06:13 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Ansluten till: <---- Swedish for "Connected to" :)Men svenska är ett vackert språk! Varför vill du inte se så mycket som möjligt?
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Column_name1
Column_name2
Data1
Data2
Swedish for "Disconnected from" Frånkopplad från Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
I can remove the query output with:
set termout off
But i want to remove the stuf like:
Swedish for "Disconnected from" Frånkopplad från Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Is there a way to remove this? Sorry, not that I know of. I believe Oracle produces that stuff before it even starts to execute your script, so nothing in the script can change it. If there's a way to suppress that output, it's probably some Operating System command.
Sorry for the messy text but i dont know how i create code boxes :)Type these 6 characters:
\(all small letters, inside curly brackets) before and after each section of formatted text. Otherwise, this site compresses whitespace.
Thanks in advance :DVarsågod!

SQLPlus output within bash script

Hey everyone, I wasn't sure if this should go here or in the SQL forum or the Linux forum, but here goes:
Using Oracle10g on Linux, I'm using a bash script to run an sql script, but when I try to echo the results, it shows the output in a single line.
Here's the script
USERLIST=`sqlplus -s / AS SYSDBA <<EOF
   set head off
   set verify off
   set feedback off
   SELECT username from dba_users;
   exit;
EOF
`
echo $USERLIST;And here's the output:
oracle@apps scripts]$ ./userl.sh
PAYROLL HR2 CORE DEMO TIMEKEEPING SYS EXPENSE Is there anyway so that the output can be shown with line breaks, where all the output is not on one line? I understand I can spool to a file using the spool command, however I'd like to try and get it working this way first.
Any help would be much appreciated, thanks.
Edited by: oscrub on Sep 22, 2010 6:46 PM

Handle:      oscrub
Status Level:      Newbie
Registered:      Oct 5, 2008
Total Posts:      7
Total Questions:      4 (3 unresolved)
so many questions & so few answers.
sh t.sh
SYSTEM
SYS
MGMT_VIEW
DBSNMP
SYSMAN
USER1
DBADMIN
HR
OE
SH
BONGO
SCOTT
OUTLN
OLAPSYS
SI_INFORMTN_SCHEMA
OWBSYS
ORDPLUGINS
XDB
ANONYMOUS
CTXSYS
ORDDATA
OWBSYS_AUDIT
APEX_030200
APPQOSSYS
WMSYS
EXFSYS
ORDSYS
MDSYS
FLOWS_FILES
SPATIAL_WFS_ADMIN_USR
SPATIAL_CSW_ADMIN_USR
APEX_PUBLIC_USER
DIP
IX
MDDATA
PM
BI
XS$NULL
ORACLE_OCMHow do you spell S-Q-L?

Supress errors in SQLPlus

Hi,
Does anyone know of a way to suppress a specific ORA error in SQLPlus?
What I want to do is to Create a View with Force option and supress the informational error:
ORA-24344: success with compilation error.
Regards
HÃ¥kan

SYS cannot connect by itself, it can connect only with the SYSDBA or SYSOPER roles. Those roles are roles enabled by Oracle even before creation time, and those are used to perform specific adminstrative tasks such as install, recover, startup and shutdown, among others.
If you want to perform other administrative tasks when the database instance is already open you may use any other user with DBA privileges, such as SYSTEM.
In order to enable access as SYSDBA/SYSOPER your os user must be authenticated, either from the os (privilged dba group) or by means of the sysdba password , stored at the database password file.
~ Madrid.

SQLPlus Output issue

Running mutiple versions of SQLPlus with the same issue : 11.1.0.6.0, 11.1.0.7.0, 11.2.0.1.0 connecting to an external suppliers 9.2.0.8 database
Batch file calls a number of sql scripts and creates and then appends the output to a file like this :
sqlplus -s user@server @SQLStatement.sql >> %FILENAME%.TMP
Within the SQL Statment we've got the following set statements then the select :
set pagesize 0
set heading off
set echo off
set verify off
set linesize 3999
set long 1000000
select lots of XMLELEMENTs Where .......
Within the output there are single space's, when the end of the line should be a space it actually drops the space and has the next line just after the last character.
Changing the linesize has no effect other than decressing the number of times it happens by having a less rows by having a larger number.
Is there a way to get the missing space back within Oracle or will I need to modify the tmp file with something like sed ?
Many Thanks

... But honestly I wasn't facing to any problem with the older version.Neither I, but who knows... Here is a list of add-ons and bugs fixed since version 0.24. The list is extracted from rlwrap's "NEWS" file.
0.28 rlwrap bug that caused termcap problems on Fedora Core 6
fixed (thanks Tung Nguyen)
0.27 when stdin is not a terminal, rlwrap will now exec() the
specified command instead of complaining
when stdout or stderr is not a terminal, rlwrap will re-open
it to /dev/tty (the users terminal) after forking off the
specified command (so "rlwrap cat > file" will work as a
quick and dirty line editor)
rlwrap now remembers inputs of length 1
-D option to tell rlwrap how agressively it should weed out
duplicate history entries
-H option added (history format string)
Added temporary fix for termcap weirdness on Fedora Core 6
new -t option for a quick check of terminal capabilities
(requires configuration with --enable-debug)
rlwrap -s 0 <command> will now zap <commands> history
fixed broken reporting of unrecognised options
0.26 configure on FreeBSD 6.0 still didn't find libutil
some files were unnecessarily kept open (thanks Stephan Springl)
on each platform, rlwrap -h now accurately reflects whether
rlwrap can use long options or optional arguments
0.25 rlwrap would print input twice when in vi-mode
rlwrap under FreeBSD 6.0 now uses openpty() from libutil (config
script fixed)
-P option added (one-shot rlwrap with pre-given prompt)
Until now, whem the underlying command was killed by a signal,
rlwrap would just exit with exit code 0. Now rlwrap will
cleanup, reset its signal handlers and then send the same signal
to itself - so that rlwraps parent (usually a shell) doesn't see
the difference with an un-rlwrapped command
Regards
N.J.

Weird sqlplus output error

I have a user here experiencing some bizarre behavior w/ sqlplus.
If she logs into database ABDC as user X and executes any script that utilizes dbms_output, she gets the following printed out repeatedly:
SQL> set serveroutput on
SQL> spool gradeload
SQL> exec dummy_package.dummy;
before v-user
before v-user
before v-user
before v-user
before v-user
before v-user
etc....
If I log into the same database, as the same user, from my own computer, or toad, or a terminal window, then I do NOT experience the same behavior.
Seems to me like some sort of variable stored to her sqlplus exe, but I don't really know how that works. Anybody know what's causing this and/or how I can get rid of it?

Dear Abdujaparov!
SQL*Plus writes it's output through stdout. Even ORA-XXXX errormessages are written through stdout. The stderr channel is only used if SQL*Plus is suffering an error and terminates abnormaly so you won't get ORA-XXX errormessages into your error file with 2>>.
I think that's not the answer you wanted to hear but I hope that it could be of any help to you.
Yours sincerely
Florian W.

Misaligned SQLPlus output

Hi,
Yes, I know this should go in the SQLPlus (tumbleweed) forum, but somebody there asked exactly the same question over a month ago and it still hasn't received even one attempted reply!
So, simple question; why is the following output misaligned? Specifically, the value 14 for SAMPLE_SIZE is placed in the middle of its column, and consequently LAST_ANALYZED (21-feb-13) is shoved into the SAMPLE_SIZE column:
1 select column_name, data_type, avg_col_len, density, num_distinct NDV, histogram, num_buckets buckets, sample_
size, last_analyzed,data_type
2 from dba_tab_cols
3 where owner = 'SCOTT'
4 and table_name = 'EMP'
5 and column_name = 'EMPNO'
6* order by internal_column_id
SYS@ORCL> /
COLUMN_NAME               DATA_TYPE AVG_COL_LEN     DENSITY          NDV HISTOGRAM       BUCKETS SAMPLE_SIZE LAST_
ANAL DATA_TYPE
EMPNO                     NUMBER               4 .071428571           14 NONE                  1       14 21-FEB-1
3 NUMBER
SYS@ORCL>Btw, the **** above should read A N A L (without the spaces) as in LAST_ANALYZED but a rather enthusiastic filter seems to be at work.
Second question - I was wondering if I had entered a COLUMN ... FORMAT command that had screwed things up..but as far as I can tell, there is no way to retrieve the list of column formats that SQLPlus is currently using - or is there?
*****Edit - ignore the second question - I just found that you can simply type
COLUMNto get a listing of all column formatting instructions currently in use. I checked to see if SAMPLE_SIZE has any formatting applied to it and it does not.
Many thanks,
Jason
Edited by: Jason_942375 on Mar 25, 2013 9:53 PM
Edited by: Jason_942375 on Mar 25, 2013 9:55 PM

Jason_942375 wrote:
Hi guys
Sorry, forgot to "watch" the thread.
Well, thanks for your advice, which all seems to boil down to setting linesize. I should have said, I had already looked at this and discounted it as responsible for the issue. I've been able to refine the problem with the following use case:
SCOTT@ORCL> SHOW LINESIZE
linesize 120
SCOTT@ORCL> DROP TABLE T;
Table dropped.
SCOTT@ORCL> create table T (X number);
Table created.
SCOTT@ORCL> insert into t values (14);
1 row created.
SCOTT@ORCL> commit;
Commit complete.
SCOTT@ORCL> select * from t;
X
14
SCOTT@ORCL> select lpad('Z',100,'Z') dummy , X from T;
DUMMY                                                                                                      X
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ      14
SCOTT@ORCL>What you can see is that the formatting of the column X changes. When just that column is selected, all is fine. When it is output next to other column output, it gets misaligned.
I think it may have something to do with the Window width, which I currently have set to 115.
If I set the linesize to a few less (not one less) than 115, it seems to wrap the next column okay. But more testing is needed (though it's not exactly the kind of thing you want to waste hours on...although it's bloody annoying!!).Probably a combination of your window width, AND the font. If it is a 'proportional' font, a space will not be as wide as a "Z" or a "W" ... a string of spaces will tend to pull everything following it to the left. Oracle and SQLPlus have no control over how your windows client renders things.

Sqlplus outputs everything in 1 line

Hello,
A colleague just logged in in his Unix system with sqlplus for the first time in 9i.
The output of a statent is displayed in 1 coninued row and not in collumns.
What can be wrong.
Any ideas ?
Thank you

Oracle is 9i
EVERY statement will output results in one line
SQL> show linesize;
linesize 80
SQL> show pagesize;
pagesize 14
SQL> show newpage;
newpage 1
SQL>
/app/oracle/product/9.2.0.8/sqlplus/admin:cat glogin.sql
-- Copyright (c) Oracle Corporation 1988, 2000. All Rights Reserved.
-- NAME
-- glogin.sql
-- DESCRIPTION
-- SQL*Plus global login startup file.
-- Add any sqlplus commands here that are to be executed when a user
-- starts SQL*Plus on your system
-- USAGE
-- This script is automatically run when SQL*Plus starts
-- For backward compatibility
SET PAGESIZE 14
SET SQLPLUSCOMPATIBILITY 8.1.7
-- Used by Trusted Oracle
COLUMN ROWLABEL FORMAT A15
-- Used for the SHOW ERRORS command
COLUMN LINE/COL FORMAT A8
COLUMN ERROR FORMAT A65 WORD_WRAPPED
-- Used for the SHOW SGA command
COLUMN name_col_plus_show_sga FORMAT a24
-- Defaults for SHOW PARAMETERS
COLUMN name_col_plus_show_param FORMAT a36 HEADING NAME
COLUMN value_col_plus_show_param FORMAT a30 HEADING VALUE
-- Defaults for SET AUTOTRACE EXPLAIN report
COLUMN id_plus_exp FORMAT 990 HEADING i
COLUMN parent_id_plus_exp FORMAT 990 HEADING p
COLUMN plan_plus_exp FORMAT a60
COLUMN object_node_plus_exp FORMAT a8
COLUMN other_tag_plus_exp FORMAT a29
COLUMN other_plus_exp FORMAT a44

Retrieve sqlplus output in a windows variable

How can I put a script output variable in a Windows batch file variable? I am looking for the Windows equivalent of something like this in Unix:
MY_VAR=`sqlplus -s un/pw @myscript`
where myscript.sql is
variable myvar varchar2(20);
begin
<<some code>>
end;
print myvar
exit

You could spool the output to some other file, then use this file somehow.
Also what I do occasionally is using some unix commands under windows. E.g. Search the web for "cygwin".

Supress Warning on SQLPLUS output

Similar Messages

Maybe you are looking for