[svn] 4290: Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel .
Revision: 4290
Author: [email protected]
Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
Log Message:
Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-288
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.as
Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
Similar Messages
-
Revision: 7197
Author: [email protected]
Date: 2009-05-21 14:49:44 -0700 (Thu, 21 May 2009)
Log Message:
Bug: BLZ-354 - Client still polling after calling ChannelSet.logout() when subscribed to messaging destination.
QA: Yes
Doc: No
Checkintests: Pass
Details: In polling channels, stop polling as soon as logout ack is received.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-354
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asAny advice would be helpful. Thanks
-
Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asRunning the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric -
I just bought a new ipad and shared my documents in Pages from the old ipad to my cloud, but the only documents showing on my new pad is the ones that was not in folders. Have I lost my documents for ever?
Thank you, but after an hour with apple support on the phone we came to the conclusion that the documents are lost... So the lesson is, don't trust icloud as a back up solution! A month worth of work down the drain...
-
Every since my Bionic updated to the new Google Play Market, I can only download or update apps when I am in a WIFI location, regardless of the size. This is very upsetting. Does anyone know why this is?
Have you checked the app settings for the Play Store?
Motorola also has data or power management settings that can restrict how applications can downloads updates. -
I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened with the window full screen it immediately closes and will only work with window smaller than maximum. Driving me mad! Any help please!!
Hi Linc
Thank you for your response.
I'm a bit of an amateur so I hope below is the information you've asked for:
Step 1
23/11/2014 09:19:14.007 ReportCrash[294]: Saved crash report for Finder[4349] version 10.10.1 (10.10.1) to /Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091914_BBBB-MacBoo k-Pro-2.crash
23/11/2014 09:19:14.008 ReportCrash[294]: Removing excessive log: file:///Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091840_BBBB -MacBook-Pro-2.crash
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x103809000): p=4357[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: process 4357[Finder]: rejecting invalid page at address 0x103809000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder[4357]) Binary is improperly signed.
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder) Service only ran for 0 seconds. Pushing respawn out by 1 seconds.
23/11/2014 09:19:15.584 Finder[4359]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x10bfbf000): p=4359[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: process 4359[Finder]: rejecting invalid page at address 0x10bfbf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
Step 2
Process: Finder [4626]
Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier: com.apple.finder
Build Info: Finder_FE-932001003000000~1
Responsible: Finder [4626]
PlugIn Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
PlugIn Identifier: com.apple.finder
-0 sec CODE SIGNING: cs_invalid_page(0x10c9a5000): p=4626[Finder] final status 0x3000a00, denying page sending SIGKILL
-0 sec CODE SIGNING: process 4626[Finder]: rejecting invalid page at address 0x10c9a5000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-2 sec CODE SIGNING: cs_invalid_page(0x10c5b3000): p=4624[Finder] final status 0x3000a00, denying page sending SIGKILL
-2 sec CODE SIGNING: process 4624[Finder]: rejecting invalid page at address 0x10c5b3000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-3 sec CODE SIGNING: cs_invalid_page(0x10f4bd000): p=4622[Finder] final status 0x3000a00, denying page sending SIGKILL
-3 sec CODE SIGNING: process 4622[Finder]: rejecting invalid page at address 0x10f4bd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-5 sec CODE SIGNING: cs_invalid_page(0x105ecf000): p=4620[Finder] final status 0x3000a00, denying page sending SIGKILL
-5 sec CODE SIGNING: process 4620[Finder]: rejecting invalid page at address 0x105ecf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-7 sec CODE SIGNING: cs_invalid_page(0x1012cd000): p=4617[Finder] final status 0x3000a00, denying page sending SIGKILL
-7 sec CODE SIGNING: process 4617[Finder]: rejecting invalid page at address 0x1012cd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
--> __TEXT 000000010c966000-000000010ce55000 [ 5052K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
__DATA 000000010ce55000-000000010cf53000 [ 1016K] rw-/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
0 com.apple.finder 0x000000010c9a521f 0x10c966000 + 258591
10 com.apple.finder 0x000000010c9977b5 0x10c966000 + 202677
11 com.apple.finder 0x000000010c988154 0x10c966000 + 139604
12 com.apple.finder 0x000000010c987e15 0x10c966000 + 138773
13 com.apple.finder 0x000000010c987d35 0x10c966000 + 138549
14 com.apple.finder 0x000000010c987cfd 0x10c966000 + 138493
28 com.apple.finder 0x000000010c96b960 0x10c966000 + 22880
1 com.apple.finder 0x000000010c98a69d 0x10c966000 + 149149
2 com.apple.finder 0x000000010c98aba7 0x10c966000 + 150439
3 com.apple.finder 0x000000010c9795d2 0x10c966000 + 79314
4 com.apple.finder 0x000000010c98aa0b 0x10c966000 + 150027
5 com.apple.finder 0x000000010c98a952 0x10c966000 + 149842
6 com.apple.finder 0x000000010c98a78a 0x10c966000 + 149386
7 com.apple.finder 0x000000010c979496 0x10c966000 + 78998
8 com.apple.finder 0x000000010c98a548 0x10c966000 + 148808
9 com.apple.finder 0x000000010c98a410 0x10c966000 + 148496
10 com.apple.finder 0x000000010c983df6 0x10c966000 + 122358
0x10c966000 - 0x10ce54ffb com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Many thanks
David -
I can not get ny updates and therefore not use Java, as it only run updates for MAC 10.7. and later. How do i get the updates to install and use JAVA ?
In Snow Leopard you update Java from Software Update (in the Apple menu). You can check your version by opening Terminal and typing
java -version
(don't get creative and type anything else)
The latest version is 1.6.0_65. -
I am only receiving my imessages through my macbook, and not my iphone anymore, I want to be able to receive them from both, how do I do this?
This user explains it all in this post:
iMessage on iPad and iPhone Explained and De-Mystified -
I cant send pic messages to iphone users. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones. I like this phone but have had nothing but trouble since day one. I am so tired of being on the phone with verizon and still not getting all the problems corrected. Someone please help!
Hello christina267,
Help is right here, front and center! Let's get your mms working properly. May I ask are you using the original stock messaging app to send texts and mms? Also, are you using any special characters or emojis in your message? Since you state that the issue is to iPhones, did you happen to have used an iPhone on your mobile number just before you were using the Galasy S 5? As you share the details then we can investigate.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport -
Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions
Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions
Sure. Take it back. If you got it from new it has a warranty.
Or describe the problem fully in case we can help. "Having trouble with the Home button" doesn't give much of a clue.... -
Why won't my pandora work when I'm not on wifi? I have the cellular data on for it but I never works. Also pandora isn't the only app of mine that does that.. What's wrong with it??
You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception. -
Revision: 1751
Author: [email protected]
Date: 2008-05-15 14:21:43 -0700 (Thu, 15 May 2008)
Log Message:
Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtopic value (which may contain wildcards) that the Consumer is using.
QA: No - customer verified the fix.
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-174
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageClient.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/MessageService.javaIf you create a metadatatype with a single metdata block, and you reference that in your vm/cm cell attribute using a *one* based index, Excel seems to see the link and it honors it when saving the spreadsheet.
So, I ended up with something like:
<c ... cm="1"/> (I'm dealing with cell metadata, but the concept is equivalente to value metadata)
<metadataTypes count="1">
<metadataType name="MyMetaType" .../>
</metadataTypes>
<futureMetadata count="1" name="MyMetaType">
<bk>
<extLst><ext
uri="http://example" xmlns:x="http://example"><x:val>87</x:val></ext></extLst>
</bk>
</futureMetadata>
<cellMetadata count="1">
<bk><rc
t="1" v="0"/></bk> <!-- this is what gets referenced as cm=1 on the cell -->
</cellMetadata>
Hope this helps. -
[svn] 869: Bug: BLZ-92 - catch IOException and log at the info level to keep from polluting the logs
Revision: 869
Author: [email protected]
Date: 2008-03-19 15:21:25 -0700 (Wed, 19 Mar 2008)
Log Message:
Bug: BLZ-92 - catch IOException and log at the info level to keep from polluting the logs
QA: Yes
Doc: No
Details:
Tomcat 5+ throws a ClientAbortException when it receives a TCP RST while writing a response to a client that has exited. This custom exception extends IOException, and we were only doing lighter INFO-level logging for SocketExceptions so the ClientAbortException was getting past this leading to ERROR level logging. This little tweak will mean less pollution of the server logs during QE load tests.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-92
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/endpoints/BaseHTTPEndpoint.ja vaHi AbhijitRoy2005,
Other then climbing in the phone and calling the vendor, you could try:
1. To use a BufferedInputStream to wrap the SocketInputStream before you wrap that in the DataInputStream. So basically:
DataInputStream dis = new DataInputStream(new BufferedInputStream(socket.getInputStream());On one of my implementations this made a difference of a factor of 200+! So instead of processing 500 messages per second, I could process 10000 messages per second!
2. Or to take it to the next level and take a look at using NIO. That is New IO, available since Merlin (Java 1.4). But that would take you way more time then the first attempt.
The thing addressed by the possible solutions above is the blocking nature of the Stream based socket handling. Using a buffered input stream reads ahead. The NIO thing is all about non-blocking IO, which uses Channels and Buffers instead of Sockets and Streams (note that these are not equivalent!).
Of course, if you didn't change something in your own code, it might just very well be that the vendor just screwed up his ;)
Regards,
Frens -
[svn] 939: Bug: BLZ-67 - Should turn off session persistence in the Tomcat server we ship.
Revision: 939
Author: [email protected]
Date: 2008-03-26 13:35:44 -0700 (Wed, 26 Mar 2008)
Log Message:
Bug: BLZ-67 - Should turn off session persistence in the Tomcat server we ship.
QA: No
Doc: No
Checkintests: Pass
Details - Turning off session persistence in the version of Tomcat that ships with BlazeDS. We don't store much in the session so session persistence doesn't make much sense for us. Users should feel free to turn this back on if they feel they need it.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-67
Modified Paths:
blazeds/branches/3.0.x/servers/apache-tomcat-6.0.14/conf/context.xmlHi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya -
Revision: 1338
Author: [email protected]
Date: 2008-04-22 07:45:18 -0700 (Tue, 22 Apr 2008)
Log Message:
Bug: BLZ-123-Attempting to use a channel that doesn't support messaging (AMFChannel/AMFEndpoint withtout polling enabled) should throw error
QA: Yes
Doc: No
Details: Added logic in Consumer such that when the Consumer is connected over a non-realtime channel (i.e. non-polling and non-streaming channel), a warning is logged to let the user know that channel is not going to automatically receive updates via client poll or server push. We can't really throw an error here because one might want to disable channel polling and manually send poll requests when needed and this is a valid configuration as well.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-123
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/rpc/src/mx/messaging/AbstractConsumer.asThanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.
Maybe you are looking for
-
Problems Moving to New Drive For Time Machine Backups
I'm moving to a new, bigger drive for my TM backups. So with the help of some suggestions here, I: 1. Turned off Time Machine 2. Formatted the new drive with "Mac OS Extended (Journaled)" 3. Cloned the old drive to the new with SuperDuper (Erase and
-
Hi everyone, I recentely bought a new mbp retina and I'm pleased to be able to be able to switch to the 1680x1050 resolution, mostly for work! Does someone know about the impact this resolution has on the battery life? Apple doesn't say a word about
-
Atheros ar5001x+ no wlan0 adapter
since the ath5k driver is already part of the kernel i just popped in the card in my dell d410 and used mod probe on the system to start ath5k. i removed the old ipw2200 drivers to prevent conflicts and followed the wiki and blacklisted all the modul
-
I am purchasing my first Mac but I have two questions. My first question is which version of Windows should I use Vista Premium or XP Home and will XP work better on it or is Vista glitchy on Mac? My second question is if I use Vista or XP and run on
-
I have the following .ctl file and I am having problems creating a custom control out of it. It is a push button and LED tied together with a frame around it. How can I create this as one control that I can use in my other .vi's? Thanks