[svn] 4877: 1.
Revision: 4877
Author: [email protected]
Date: 2009-02-06 11:27:45 -0800 (Fri, 06 Feb 2009)
Log Message:
1. In textFlow_compositionCompleteHandler(), handle rounding error if returned contentWidth/Height is just over requested width/height. This should never be the case but it is, so deal with it so an infinite loop between the TextView and the scroller can be avoided.
2. Make the in-focus cursor, black, with inverted blend mode, so it will have max. visibility against whatever background color is being used.
3. Check pointer before access in focusInHandler()/focusOutHandler() since it is null if the component is not editable and not selectable.
4. If halo text component inherits it's styles from a gumbo component it's possible that there are invalid style properties for halo. Handle the narrow case where textAlign is "start" or "end". There are probably other cases and we need to look for these.
QE Notes: for SDK-19106 also test cursor against black/dark background (contentBackgroundColor="black")
Doc Notes:
Bugs: SDK-19144/SDK-19155, SDK-19106, SDK-19025, SDK-19140
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19106
http://bugs.adobe.com/jira/browse/SDK-19144
http://bugs.adobe.com/jira/browse/SDK-19155
http://bugs.adobe.com/jira/browse/SDK-19106
http://bugs.adobe.com/jira/browse/SDK-19025
http://bugs.adobe.com/jira/browse/SDK-19140
Modified Paths:
flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/components/TextView.as
flex/sdk/branches/i10/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/branches/i10/frameworks/projects/framework/src/mx/core/UITextField.as
my mistake about gaim-svn in aur, someone might have posted the pkgbuild in the forums at some point. Maybe the name at the top will give it away
If you want the latest version, grab this PKGBUILD (or the other posted) and install versionpkg - then run versionpkg in the same dir as this PKGBUILD. That should build you the current version
#Contributor: SaintShakaJin <saintshakajin>
pkgname=gaim-svn
pkgver=18081
pkgrel=1
pkgdesc="A GTK+-based messaging client"
url="http://gaim.sourceforge.net"
depends=('startup-notification' 'libao' 'gnutls>=1.2.0' 'gtk2' 'gtkspell'
'audiofile' 'perl' 'python' 'libxss' 'dbus' 'ncurses' 'nss' 'aspell')
provides=('gaim')
conflicts=('gaim' 'gaim-cvs' 'gaim-devel')
makedepends=('subversion' 'intltool' 'pkgconfig')
source=()
md5sums=()
_svnmod=gaim
_svntrunk=https://svn.sourceforge.net/svnroot/gaim/trunk
build() {
cd $startdir/src
msg "Getting source..."
svn co $_svntrunk $_svnmod -r $pkgver
cd $_svnmod
msg "Starting make..."
./autogen.sh --prefix=/usr
--enable-aspell --enable-gnutls=yes --enable-nss=yes
--enable-dbus --with-x
--disable-mono --disable-gstreamer
--disable-gevolution
--disable-tcl --disable-tk
--disable-doxygen
make || return 1
make prefix=$startdir/pkg/usr install || return 1
rm $startdir/pkg/usr/lib/perl5/*/$CARCH-linux-thread-multi/perllocal.pod
mv $startdir/pkg/usr/lib/perl5/?.?.? $startdir/pkg/usr/lib/perl5/current
find $startdir/pkg -name '*.la' -exec rm {} ;
Similar Messages
-
Domain Guideance and Clarification using SVN and an Export suggestion
Hello Oracle SQL Data Modeler Support,
Apologies if this has been documented somehwere and I have missed reading it, but have gone through the User Guide and cannot find the clarification I want regarding domains.
1) WHAT IS BEST PRACTICE TO SAVE WHEN USING SVN
From the forum I have picked up that the domains file is in the following directory:
~\datamodeler\datamodeler\types
File name is 'defaultdomains.xml'
When I come to save the file using SVN I get 'Choose versioned folder for storing system types'
I assume this is where the domains file is stored.
I require the Domains to be avialable centrally to all Designs I create, what should I do?
a) Set the folder to ~\datamodeler\datamodeler\types
b) Create a design called 'Domains' and store it in this folder
c) Any thing you may suggest
2) EXPORT OF DOMAIN FILE SUGGESTION
This should be a quick win for you, can you please add an Export Domains function, seems this needs to do no more than make a copy of the defaultdomains.xml file and create it in a specified export directory.
Will avoid having to go through the forum to pick up that the defaultdomains.xml file needs to be copied and transfered over for new SQL Data Modeler installations.Hello,
I require the Domains to be avialable centrally to all Designs I create, what should I do?Default location is fine if SVN is not used and if all designs are used only on that computer.
If versioning is used then it's better to have separate directory for domains and this directory shouldn't be part of any design's directory - i.e. for designs you can have directories c:\des_1, c:\des_2 ...c:\des_n - one directory per each design and that directory will contain design DMD file and design folder. For domains you can have directory c:\DM_Sys_types and you need to set this directory in "Tools>Preferences>Data Modeler>system types directory" - logical types, RDBMS sites and scripts also will be stored there.
Philip -
Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Try expose svn via http, but Location directive does not work.
Hello everyone,
I used svn exposed via http in OSX 10.6 and 10.7 using collabnet.
Now I take OSX server 10.8 and installed svn inside XCode.
SVN is correctly installed, apache respond to default site.
I copied the modules dav_svn_module and authz_svn_module compiled on my machine with same svn version of XCode [version 1.6.18 (r1303927)] .
I created a file into /etc/apache2/other called svn.conf that contain follow code:
LoadModule dav_svn_module libexec/apache2/mod_dav_svn.so
LoadModule authz_svn_module libexec/apache2/mod_authz_svn.so
<Location /repo>
DAV svn
SVNPath '/Volumes/VMware HD/svn/repository'
</Location>
Checking if module are loaded with sudo apachectl -t -D DUMP_MODULES i obtain:
Loaded Modules:
dav_svn_module (shared)
authz_svn_module (shared)
Syntax OK
So file svn.conf is loaded and the module too.
When I try to check via browser with http://localhost/repo I obtain in /var/log/apache2/error_log the following error:
[Wed Feb 13 12:41:12 2013] [error] [client 192.168.1.114] File does not exist: /Library/Server/Web/Data/Sites/Default/repo
Is Location directive failing?!
How can I expose the right repository location instead of default site?Oeren,
I stumbled across this little tidbit buried in the BI Publisher forum: Dynamic Images in rtf
Glad you are up and running!
Joshua -
Problem with Xfce-svn & thunar
Hi, I've got a problem with Xfce-svn installed via pacman from
Server = http://arch.os-zen.net/pkg/xfce-svn
After logging, Xfce is loading and after while I can see 2 panels and black screen (and without icons on desktop) although I set the wallpaper. It shows up after ca 5 minutes. What's more - when I want to start Thunar I must wait few minutes. I thought it was caused by some error with thunar package, but I've updated thunar few times since it happened first time.
I post this problem on polish forum, but it's unsolved... Can somebody help me?xaerxess wrote:
Hi, I've got a problem with Xfce-svn installed via pacman from
Server = http://arch.os-zen.net/pkg/xfce-svn
After logging, Xfce is loading and after while I can see 2 panels and black screen (and without icons on desktop) although I set the wallpaper. It shows up after ca 5 minutes. What's more - when I want to start Thunar I must wait few minutes. I thought it was caused by some error with thunar package, but I've updated thunar few times since it happened first time.
I post this problem on polish forum, but it's unsolved... Can somebody help me?
How did you start xfce? Was it using CPU while you're waiting? You could try to start xterm after x (without desktop), then run the following to see if each of them works:
· xfdesktop &
· xfce4-panel &
· xfwm4 --daemon -
[SVN] checking out takes ages..
Hello all,
Do you have the same problem with it? Arch seems to be the only distro I have this problem on. Checking out repositories just takes several minutes. Downloading the files is just as fast as it should be. It's just the initializing part. Maybe svn has too many unneeded dependencies?
Thanks in advance,
--Ronnysvn works fine for me. Perhaps you should mess with some 'verbose' flags or something and try to figure out exactly where the bottleneck is.
DeliQ wrote:Maybe svn has too many unneeded dependencies?
depends=('neon>=0.25.5-4' 'apr-util>=1.2.7-2') -
How can I use an existing local svn workspace with SQL Developer?
I have a couple directories of files on my local drive that hold my current working files from the svn repository. I use both TortoiseSVN and Cygwin to keep the local files in sync with the repository, depending on my mood. I have created a connection to the repository in SQL Developer, and I can browse the repository just fine. My goal is to have SQL Developer play nice with the local files, just like the other two Subversion clients do. Is there a way I can inform SQL Developer of my local files without re-importing them through the Versioning -> Import... wizard, without changing anything (or putting anything at risk) in the local workspace?
Thanks in advance for your help -
WallyThen can her computer be authorized to both accounts?
Absolutely. You can authorize any given computer to up to five iTunes Store accounts.
If purchases are made on her account, to a computer authorized to my account, can I put those songs on my iPod?
If you connect your iPod to her computer, yes. Tracks download only to the computer from which they're purchased, regardless of which iTunes Store account is used for the purchase. Or you could copy the tracks from her computer to yours and then authorize your computer to her iTunes Store account. But that's sort of defeating the original purpose, it would seem to me.
is it better to buy music through Amazon downloads and/or actually purchasing CDs to avoid the security features iTunes puts on its music?
That's certainly an option. If it's an entire album I want, I buy CDs. That way I can import them at the quality I want and to whichever of my systems I want. Amazon or one of the other download stores that offer tracks as MP3 are also an option, though for me download stores are best when you just want a couple of tracks off a given CD. -
Visarc generates dirty project using SVN source control
Hi,
I've read in different topics some issues related to the visarc file, but unfortunately, none of them helped me out. I was wondering if any of you came across this issue and found a solution or workaround to it.
The problem relates to a LabVIEW project which opens dirty, as you commonly say, under some circunstances. Below I will explain some of the problems I encountered as I tried to track this problem down.
1. I'm running a large LabVIEW Run-Time project using a PXI with several FPGA - cRIO.
2. I found that when opening the project file, this is perfectly clean and no asterisk shows in the title bar. I close the project and no saving is needed.
3. I open the project again and I open a sub-VI which contains the following code:
4. Straight away, the file visarc shows up under the Dependencies tree of the Real-Time PXI and the asterisk shows now on the title bar of the project (not the VI).
5. The VI closes without needed to be saved but the project says that an item was added, removed and added, and it has to be saved (as soon as I close the subVI above, the visarc file dissapears from the Dependencies section).
6. What I do next is to add this file visarc (located in Program Files\National Instruments\LabVIEW 2012\resource) to the project under the PXI tree. I then save the project and close it.
7. I open the project again, and it keeps being clean (not dirty, as you say).
8. I open the same sub-vi than before and everything keeps being clean and no saving is needed neither on the sub-VI nor the project. Everything goes smooth in my local computer from now on.
However, the issue that I can not resolve follows:
9. We are two people working on this project, and we're using SVN as source version control. Everything works fine in my computer, but when my partner update the files on his computer, the project opens dirty as soon as it opens (only the project, the sub-VI is no needed to be saved).
10. My partner just save the project and close it, and it becomes clean straight away in his computer. The files which are saved are the aliases file (I expected that), the labview project file, and the LVLPS File of the project.
This issue will happen again as soon as any of us downloads the SW committed by the other.
I hope any of you can help me out with this issue. Any suggestion or idea are welcome.
Thank you very much in advanced.
Best regards,
danidprAs far as I know, the resource manager does not support version control. If you map the version control folder to a local folder, you can use that in RoboHelp. But I'm afraid that any changes in the resource manager files will require you to manually check them out first. This is how I'm doing it anyway.
Kind regards,
Willam -
[solved]make error when using svn in PKGBUILD
Hi, all
I want to install the development package of R software using PKGBUILD. My PKGBUILD file is like this:
pkgname=r
_svnmod=r
pkgver=0.0.0
pkgrel=1
pkgdesc="R is a language and environment for statistical computing and graphics"
arch=('i686' 'x86_64')
license=('GPL')
url=('http://www.r-project.org/')
depends=('blas' 'lapack' 'bzip2' 'libpng' 'libjpeg' 'libtiff'
'ncurses' 'pcre' 'readline' 'zlib' 'perl' 'gcc-libs'
'tk' 'libxt' 'libxmu' 'pango')
#makedepends=('subversion' 'openjdk6' 'gcc-fortran')
makedepends=('subversion' 'jre7-openjdk')
options=('!makeflags')
conflicts=('r')
provides=('r')
source=('r::svn+https://svn.r-project.org/R/trunk/')
md5sums=('SKIP')
pkgver() {
cd "$SRCDEST/$_svnmod"
svnversion
build() {
cd "$srcdir/$_svnmod"
./configure --prefix=/usr \
--libdir=/usr/lib \
--datarootdir=/usr/share \
rsharedir=/usr/share/R/ \
rincludedir=/usr/include/R/ \
rdocdir=/usr/share/R/docs/ \
--enable-memory-profiling \
--with-readline \
--with-x \
--with-system-zlib \
--with-system-bzlib \
--with-system-pcre \
--enable-R-shlib \
--with-lapack \
--with-blas \
--without-recommended-packages \
F77=gfortran \
LIBnn=lib
make
package() {
cd "$srcdir/$_svnmod"
make -j1 DESTDIR=${pkgdir} install
# Fixup R wrapper scripts.
sed -i "s|${pkgdir} ||" ${pkgdir}/usr/bin/R
rm ${pkgdir}/usr/lib/R/bin/R
cd ${pkgdir}/usr/lib/R/bin
ln -s ../../../bin/R
But i encounter a make error like this:
ERROR: not an svn checkout
make: *** [svnonly] ERROR 1
Did anyone give me some advices? Thanks a lot!
PS. I was noticed that in wiki page "VCS PKGBUILD Guidelines", "The copy in $srcdir is made using svn export which does not create working copies. Any svn related command has to be used in the local repo in $SRCDEST." So when I change the cd line in build() and package() function into
cd "$SRCDEST/$_svnmod"
the error message vanished. But the local repo are changed when configure and make the project.
Last edited by januslian (2013-05-06 08:50:09)Scimmia wrote:This will be fixed in pacman 4.1.1. For now, just copy the ".svn" dir yourself. cp -r "$SRCDEST/$_svnmod/.svn" "$srcdir/$_svnmod"
Great, it works. Thanks. -
Best practice when developing APEX apps and using a SVN repository
Hi experts,
I wanted to get your opinion on best practice regarding how to use SVN and APEX combined.
The idea is basically how to structure and how to save APEX apps the best way in a repository.
I am currently working with a custom SVN structure, not using the default TRUNC/TAGS one : every app has a folder , under every app folder i have PAge number folders, and for each page reports, regions and global objects separated.
This helps me because its more readable then saving the whole page export, its good for small changes and i have a clear overview of every bit and piece.
What is everybody else using or is there a best practice to follow here that i dont know?
Kind regards,
Alex@tomaugerdotcom
Something like this might help: https://testflightapp.com/
Concevably, you could roll your own internal service if that particular one doesn't suit you. (I don't have any knowledge about how they are doing it, but it shouldn't be hard to figure out since Apple's constraining rules would only allow a few possibilities.)
USB app install and debugging isn't supported on iOS. You have to use wireless.
Another option specifically for multi-touch dev/testing, is to use an Android device. -
SVN repository on local IP address?
I installed all the remote/SVN stuff I could find in Eclipse, and I'm trying to create an SVN repository on a local intranet IP address, but no matter what I do it gives me an error "Location information has been specified incorrectly" with a more specific error message.
If I specify http:// intranetip/thesvnfolder (no spaces), it says
RA layer request failed
svn: Unable to connect to a repository at [the URL]
svn: The OPTIONS request returned invalid XML in the response: XML parse error at line 1: no element found
By the way, I had to break up the URL because this page is saying "You can only use links to eclipse.org sites while you have fewer than 5 messages."Hi,
I am facing the similar issue.
I have installed my remote system Eclipse and SVN within it , to my local system.
Tried to import the project from SVN location while being connected to my remote server. But getting error
Sharing the screenshot of the error message which I am getting.
What could be the possible reason.
Thanks ,
Pramit -
Connecting to an SVN server | Digital Design CS4 | Adobe TV
Set up a connection to an SVN (Subversion) version control server.
http://adobe.ly/wI7Q1rCurious... is there a way to set this up locally?
-
Greetings everyone,
I am experiencing some weird behavior while using External Subtitles, e.g. Playing an AVI file with PS3MediaServer works fine but playing the very same AVI file with external subtitles gives me the video with subtitles and no sound.
My Server configuration is as follows :
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RAM :2048 Mo
OS : Archlinux 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011 x86_64
Target : Playstation 3 Slim, firmware 3.60
Here are the various Sofware versions I use :
PMS version I am using is PS3 Media Server 1.21.0 (built from AUR, PKG: pms-svn)
Java version is Java: 1.6.0_22-Sun Microsystems Inc.
MPlayer version is "MPlayer SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team" and so is "MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team"
TSMuxer version is "1.10.6-10"
FFMpeg version is "FFmpeg version git-2611e52"
The network configuration of the server is : 192.168.0.20, netmask 255.255.255.0 ; 100MBits Full Duplex (Wired)
The network configuration of the Playstation 3 is : 192.168.0.15, netmask 255.255.255.0 ; Auto (Wired, no WiFi !)
Both are linked on a 100MBits Switch : Playstation 3 <--> Switch 100 Mbits <--> PS3 Media Server
My PMS.conf is :
thumbnails = true
language =
prevents_sleep_mode = true
folders = \/srv\/shares
network_interface = eth0
hide_empty_folders = true
hide_media_library_folder = true
hide_transcode_folder = true
hide_enginenames = true
enable_archive_browsing = false
audio_thumbnails_method = 2
mencoder_subfribidi = false
mencoder_disablesubs = false
autoloadsrt = true
hostname =
port = 5001
thumbnail_seek_pos = 10
nbcores = 4
turbomode = true
minimized = false
hidevideosettings = false
charsetencoding = 850
engines = mencoder,avsmencoder,tsmuxer,mplayeraudio,ffmpegaudio,tsmuxeraudio,mencoderwebvideo,mplayervideodump,mplayerwebaudio,ffmpegdvrmsremux
avisynth_convertfps = true
avisynth_script = #AviSynth script is now fully customisable
transcode_block_multiple_connections = false
tsmuxer_forcefps = true
tsmuxer_preremux_pcm = false
tsmuxer_preremux_ac3 = false
audiochannels = 2
audiobitrate = 384
maximumbitrate = 0
skiploopfilter = false
mencoder_fontconfig = false
mencoder_font =
mencoder_forcefps = false
mencoder_usepcm = false
mencoder_intelligent_sync = true
mencoder_decode =
mencoder_encode = keyint=1:vqscale=1:vqmin=2
mencoder_nooutofsync = true
# mencoder_audiolangs = fre,eng
# mencoder_sublangs = fre,off;fr,off;eng,off;en,off
mencoder_audiosublangs = fre,off;fr,off;eng,off;en,off
mencoder_ass_scale = 1.0
mencoder_ass_margin = 10
mencoder_ass_outline = 1
mencoder_ass_shadow = 1
mencoder_noass_scale = 3
mencoder_noass_subpos = 2
mencoder_noass_blur = 1
mencoder_noass_outline = 1
mencoder_subcp = cp1252
mencoder_ass = false
mencoder_yadif = false
mencoder_scaler = false
mencoder_scalex = 0
mencoder_scaley = 0
ffmpeg = -g 1 -qscale 1 -qmin 2
# The next value has to be chosen very carefully: to low = possible stuttering if the network is congested, but
# to high causes the java heap to be to small. Check the -Xmx-setting in /opt/pms/PMS.sh and raise it to 1024M
# or higher if you see unexplainable Out Of Memory-errors in the debug.log
maxvideobuffer = 400
use_mplayer_for_video_thumbs = false
# The next value sorts your media files. 0 (default) = A-Z while 1 = Z-A
sort_method =
usecache = true
forcetranscode=
Here are the tests I have run :
MediaInfo output
General
Complete name : test without subs.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 350 MiB
Duration : 42mn 24s
Overall bit rate : 1 153 Kbps
Writing application : transcode-1.0.6
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 42mn 24s
Bit rate : 978 Kbps
Width : 624 pixels
Height : 352 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.186
Stream size : 296 MiB (85%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 42mn 23s
Bit rate mode : Variable
Bit rate : 160 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 49.4 MiB (14%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.58 video frame)
Writing library : LAME3.90.
Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
And its very same but with external subtitles :
-rw-r--r-- 1 svc-pms svc-pms 77159 Oct 12 12:57 test with subs.srt
-rw-rw-r-- 1 svc-pms svc-pms 366711578 Oct 23 10:50 test with subs.avi
MediaInfo output, just to acknowledge it is the same file, but with a different name
General
Complete name : test with subs.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 350 MiB
Duration : 42mn 24s
Overall bit rate : 1 153 Kbps
Writing application : transcode-1.0.6
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 42mn 24s
Bit rate : 978 Kbps
Width : 624 pixels
Height : 352 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.186
Stream size : 296 MiB (85%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 42mn 23s
Bit rate mode : Variable
Bit rate : 160 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 49.4 MiB (14%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.58 video frame)
Writing library : LAME3.90.
Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
A- I tried playing the AVI file without external subtitles and it is working fine.
/var/log/pms.log :
GUI environment not available
Switching to console mode
[main] TRACE 06:17:02.228 Starting PS3 Media Server 1.21.0
[main] TRACE 06:17:02.237 by shagrath / 2008-2011
[main] TRACE 06:17:02.237 http://ps3mediaserver.org
[main] TRACE 06:17:02.237 http://ps3mediaserver.blogspot.com
[main] TRACE 06:17:02.238 http://code.google.com/p/ps3mediaserver
[main] TRACE 06:17:02.238
[main] TRACE 06:17:02.238 Java: 1.6.0_22-Sun Microsystems Inc.
[main] TRACE 06:17:02.238 OS: Linux amd64 2.6.37-ARCH
[main] TRACE 06:17:02.238 Encoding: UTF-8
[main] TRACE 06:17:02.238 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
[main] TRACE 06:17:02.238 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
[main] TRACE 06:17:02.245 Temp folder: /tmp/ps3mediaserver
[main] TRACE 06:17:02.652 Loading configuration file: FreeboxHD.conf
[main] TRACE 06:17:02.662 Loading configuration file: XBMC.conf
[main] TRACE 06:17:02.666 Loading configuration file: FreecomMusicPal.conf
[main] TRACE 06:17:02.669 Loading configuration file: XBOX360.conf
[main] TRACE 06:17:02.685 Loading configuration file: PS3.conf
[main] TRACE 06:17:02.705 Loading configuration file: Streamium.conf
[main] TRACE 06:17:02.708 Loading configuration file: WDTVLive.conf
[main] TRACE 06:17:02.710 Loading configuration file: N900.conf
[main] TRACE 06:17:02.712 Loading configuration file: Philips.conf
[main] TRACE 06:17:02.715 Loading configuration file: Bravia4500.conf
[main] TRACE 06:17:02.718 Loading configuration file: WMP.conf
[main] TRACE 06:17:02.720 Loading configuration file: Samsung.conf
[main] TRACE 06:17:02.722 Loading configuration file: Bravia5500.conf
[main] TRACE 06:17:02.724 Loading configuration file: Realtek.conf
[main] TRACE 06:17:02.726 Loading configuration file: Kuro.conf
[main] TRACE 06:17:02.729 Loading configuration file: Android.conf
[main] TRACE 06:17:02.731 Loading configuration file: BraviaEX.conf
[main] TRACE 06:17:02.734 Loading configuration file: PopcornHour.conf
[main] TRACE 06:17:02.736 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
[main] TRACE 06:17:04.173 Done!
[main] TRACE 06:17:04.210 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
[main] TRACE 06:17:04.227 No plugins found
[main] TRACE 06:17:04.257 Registering transcoding engine FFmpeg Audio
[main] TRACE 06:17:04.300 Registering transcoding engine MEncoder
[main] TRACE 06:17:04.300 Registering transcoding engine MPlayer Audio
[main] TRACE 06:17:04.301 Registering transcoding engine MEncoder Web
[main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Video Dump
[main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Web
[main] TRACE 06:17:04.303 Registering transcoding engine TsMuxer
[main] TRACE 06:17:04.303 Registering transcoding engine Audio High Fidelity
[main] TRACE 06:17:04.303 Registering transcoding engine VLC Audio Streaming
[main] TRACE 06:17:04.304 Registering transcoding engine VLC Video Streaming
[main] TRACE 06:17:04.304 Registering transcoding engine Raws Thumbnailer
[main] TRACE 06:17:04.401 Scanning network interface eth0 / eth0
[main] TRACE 06:17:04.403 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
[main] TRACE 06:17:04.403 Created socket: /192.168.0.20:5001
[main] TRACE 06:17:04.548 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
[main] TRACE 06:17:04.930 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
[main] TRACE 06:17:05.001 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
[New I/O server worker #1-1] TRACE 06:17:08.787 Renderer Playstation 3 found on this address: /192.168.0.15
[main] TRACE 06:17:09.902 It's ready! You should see the server appear on the XMB
[New I/O server worker #1-1] TRACE 06:17:10.794 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
/opt/pms/debug.log :
available at : http://dpaste.org/774i/
B - I tried playing the AVI file with external subtitles (SRT) and the file is playing with subtitles but no sound :-(
/var/log/pms.log :
GUI environment not available
Switching to console mode
[main] TRACE 06:20:24.967 Starting PS3 Media Server 1.21.0
[main] TRACE 06:20:24.968 by shagrath / 2008-2011
[main] TRACE 06:20:24.968 http://ps3mediaserver.org
[main] TRACE 06:20:24.968 http://ps3mediaserver.blogspot.com
[main] TRACE 06:20:24.968 http://code.google.com/p/ps3mediaserver
[main] TRACE 06:20:24.969
[main] TRACE 06:20:24.969 Java: 1.6.0_22-Sun Microsystems Inc.
[main] TRACE 06:20:24.969 OS: Linux amd64 2.6.37-ARCH
[main] TRACE 06:20:24.969 Encoding: UTF-8
[main] TRACE 06:20:24.969 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
[main] TRACE 06:20:24.969 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
[main] TRACE 06:20:24.973 Temp folder: /tmp/ps3mediaserver
[main] TRACE 06:20:25.038 Loading configuration file: FreeboxHD.conf
[main] TRACE 06:20:25.040 Loading configuration file: XBMC.conf
[main] TRACE 06:20:25.041 Loading configuration file: FreecomMusicPal.conf
[main] TRACE 06:20:25.044 Loading configuration file: XBOX360.conf
[main] TRACE 06:20:25.047 Loading configuration file: PS3.conf
[main] TRACE 06:20:25.055 Loading configuration file: Streamium.conf
[main] TRACE 06:20:25.057 Loading configuration file: WDTVLive.conf
[main] TRACE 06:20:25.059 Loading configuration file: N900.conf
[main] TRACE 06:20:25.061 Loading configuration file: Philips.conf
[main] TRACE 06:20:25.063 Loading configuration file: Bravia4500.conf
[main] TRACE 06:20:25.065 Loading configuration file: WMP.conf
[main] TRACE 06:20:25.068 Loading configuration file: Samsung.conf
[main] TRACE 06:20:25.069 Loading configuration file: Bravia5500.conf
[main] TRACE 06:20:25.071 Loading configuration file: Realtek.conf
[main] TRACE 06:20:25.073 Loading configuration file: Kuro.conf
[main] TRACE 06:20:25.076 Loading configuration file: Android.conf
[main] TRACE 06:20:25.077 Loading configuration file: BraviaEX.conf
[main] TRACE 06:20:25.080 Loading configuration file: PopcornHour.conf
[main] TRACE 06:20:25.082 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
[main] TRACE 06:20:25.144 Done!
[main] TRACE 06:20:25.153 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
[main] TRACE 06:20:25.153 No plugins found
[main] TRACE 06:20:25.160 Registering transcoding engine FFmpeg Audio
[main] TRACE 06:20:25.166 Registering transcoding engine MEncoder
[main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Audio
[main] TRACE 06:20:25.167 Registering transcoding engine MEncoder Web
[main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Video Dump
[main] TRACE 06:20:25.168 Registering transcoding engine MPlayer Web
[main] TRACE 06:20:25.169 Registering transcoding engine TsMuxer
[main] TRACE 06:20:25.169 Registering transcoding engine Audio High Fidelity
[main] TRACE 06:20:25.170 Registering transcoding engine VLC Audio Streaming
[main] TRACE 06:20:25.170 Registering transcoding engine VLC Video Streaming
[main] TRACE 06:20:25.170 Registering transcoding engine Raws Thumbnailer
[main] TRACE 06:20:25.223 Scanning network interface eth0 / eth0
[main] TRACE 06:20:25.224 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
[main] TRACE 06:20:25.224 Created socket: /192.168.0.20:5001
[main] TRACE 06:20:25.279 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
[main] TRACE 06:20:26.010 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
[main] TRACE 06:20:26.017 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
[New I/O server worker #1-1] TRACE 06:20:28.867 Renderer Playstation 3 found on this address: /192.168.0.15
[New I/O server worker #1-1] TRACE 06:20:30.872 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
[main] TRACE 06:20:32.488 It's ready! You should see the server appear on the XMB
[New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
So, obviously here, the only thing which changes from before was that, this time, the PS3 Media Server did a transcode/remux of the file (for the subtitles to be streamed)
/opt/pms/debug.log :
available at : http://dpaste.org/6XMI/
I have pasted the complete debug.log but I believe the problem is around this :
[New I/O server worker #1-6] DEBUG 06:20:56.874 Opened request handler on socket /192.168.0.15:64494 // Playstation 3
[New I/O server worker #1-6] DEBUG 06:20:56.874 Request: HTTP/1.0 : HEAD : get/0$0$4$0/test+with+subs.avi
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Accept-Encoding: identity
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Cache-Control: no-cache
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Connection: close
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Host: 192.168.0.20:5001
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: User-Agent: PLAYSTATION 3
[New I/O server worker #1-6] INFO 06:20:56.874 HTTP: get/0$0$4$0/test+with+subs.avi / 0-0
[New I/O server worker #1-6] DEBUG 06:20:56.874 Searching for objectId: 0$0$4$0 with children option: false
[New I/O server worker #1-6] DEBUG 06:20:56.875 Asked stream chunk [0-0] timeseek: 0.0 of test with subs.avi and player MEncoder
[New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
[New I/O server worker #1-6] DEBUG 06:20:56.875 Looking for an audio track with lang: eng
[New I/O server worker #1-6] DEBUG 06:20:56.883 Looking for an audio track with lang: fre
[New I/O server worker #1-6] DEBUG 06:20:56.884 Looking for an audio track with lang: jpn
[New I/O server worker #1-6] DEBUG 06:20:56.886 Looking for an audio track with lang: ger
[New I/O server worker #1-6] DEBUG 06:20:56.887 Looking for an audio track with lang: und
[New I/O server worker #1-6] DEBUG 06:20:56.888 Matched audio track: Audio: MP3 / lang: und / ID: 1
[New I/O server worker #1-6] DEBUG 06:20:56.888 Search a match for: und with fre and off
[New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with fr and off
[New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with eng and off
[New I/O server worker #1-6] DEBUG 06:20:56.890 Search a match for: und with en and off
[New I/O server worker #1-6] DEBUG 06:20:56.891 Found subtitles track: Sub: SubRip / lang: und / ID: 100 / FILE: /srv/shares/test_with_sub/test with subs.srt
[New I/O server worker #1-6] DEBUG 06:20:56.891 Found external file: /srv/shares/test_with_sub/test with subs.srt
[New I/O server worker #1-6] DEBUG 06:20:56.892 channels=2
[mkfifo] INFO 06:20:56.979 Starting mkfifo --mode=777 /tmp/ps3mediaserver/mencoder1300252856978
[mkfifo] INFO 06:20:56.995 Unix process ID (mkfifo): 4390
[mencoder] INFO 06:20:57.029 Starting mencoder -ss 0 -quiet /srv/shares/test_with_sub/test with subs.avi -quiet -quiet -oac lavc -of mpeg -quiet -quiet -mpegopts format=mpeg2:muxrate=500000:vbuf_size=1194:abuf_size=64 -ovc lavc -channels 2 -lavdopts debug=0:threads=4 -lavcopts autoaspect=1:vcodec=mpeg2video:acodec=ac3:abitrate=256:threads=4:keyint=1:vqscale=1:vqmin=2 -spuaa 3 -subfont-text-scale 3 -subfont-outline 1 -subfont-blur 1 -subpos 98 -quiet -quiet -sid 100 -quiet -quiet -ofps 24000/1001 -sub /srv/shares/test_with_sub/test with subs.srt -utf8 -mc 0 -noskip -af lavcresample=48000 -srate 48000 -o /tmp/ps3mediaserver/mencoder1300252856978
[mencoder] INFO 06:20:57.048 Reading pipe: /tmp/ps3mediaserver/mencoder1300252856978
[mencoder] DEBUG 06:20:57.049 Opening file /tmp/ps3mediaserver/mencoder1300252856978 for reading...
[New I/O server worker #1-6] DEBUG 06:20:57.129 Sleeping for 6000 milliseconds
[mencoder] INFO 06:20:57.395 Attaching thread: mencoder
[Timer-1] DEBUG 06:20:57.396 Buffered Space: 0 bytes / inputs: 0
[mencoder] INFO 06:20:57.396 Unix process ID (mencoder): 4395
[Thread-30] DEBUG 06:20:57.396 MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team
[Thread-30] DEBUG 06:20:57.397 161 audio & 351 video codecs
[Thread-30] DEBUG 06:20:57.397 success: format: 0 data: 0x0 - 0x15db931a
[Thread-30] DEBUG 06:20:57.397 AVI file format detected.
[Thread-30] DEBUG 06:20:57.397 [aviheader] Video stream found, -vid 0
[Thread-30] DEBUG 06:20:57.397 [aviheader] Audio stream found, -aid 1
[Thread-30] DEBUG 06:20:57.397 VIDEO: [XVID] 624x352 24bpp 23.976 fps 977.5 kbps (119.3 kbyte/s)
[Thread-30] DEBUG 06:20:57.397 [V] filefmt:3 fourcc:0x44495658 size:624x352 fps:23.976 ftime:=0.0417
[Thread-30] DEBUG 06:20:57.397 ==========================================================================
[Thread-30] DEBUG 06:20:57.397 Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
[Thread-30] DEBUG 06:20:57.397 AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
[Thread-30] DEBUG 06:20:57.397 Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
[Thread-30] DEBUG 06:20:57.397 ==========================================================================
[Thread-30] DEBUG 06:20:57.397 PACKET SIZE: 2048 bytes, deltascr: 884
[Thread-30] DEBUG 06:20:57.397 Opening video filter: [expand osd=1]
[Thread-30] DEBUG 06:20:57.397 Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
[Thread-30] DEBUG 06:20:57.397 ==========================================================================
[Thread-30] DEBUG 06:20:57.397 Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
[Thread-30] DEBUG 06:20:57.403 Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
[Thread-30] DEBUG 06:20:57.403 ==========================================================================
[Thread-27] DEBUG 06:20:57.403 [ac3 @ 0xd37ca0]No channel layout specified. The encoder will guess the layout, but it might be incorrect.
[Thread-27] DEBUG 06:20:57.437 Limiting audio preload to 0.4s.
[Thread-27] DEBUG 06:20:57.437 Increasing audio density to 4.
[Thread-30] DEBUG 06:20:57.463 Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
[Thread-30] DEBUG 06:20:57.463 videocodec: libavcodec (624x352 fourcc=3267706d [mpg2])
[Thread-30] DEBUG 06:20:57.463 [VE_LAVC] Using constant qscale = 1.000000 (VBR).
[Thread-30] DEBUG 06:20:57.617 Writing header...
[Timer-1] DEBUG 06:20:59.396 Buffered Space: 26595328 bytes / inputs: 0
[Thread-28] DEBUG 06:21:01.227 freeMemory: 25791584
[Thread-28] DEBUG 06:21:01.227 totalMemory: 81592320
[Thread-28] DEBUG 06:21:01.228 maxMemory: 715849728
[Thread-28] DEBUG 06:21:01.228 Extending buffer to 419430400
[Timer-1] DEBUG 06:21:01.397 Buffered Space: 49999872 bytes / inputs: 0
[Thread-28] DEBUG 06:21:01.726 Done extending
Thing is, I do not have the same issue with files that are not (yet) MP3-Audio powered, for instance :
General
Complete name : /srv/shares/media03/directories/toto.avi
Format : AVI
Format/Info : Audio Video Interleave
Format profile : OpenDML
Format settings : rec
File size : 1.59 GiB
Duration : 1h 46mn
Overall bit rate : 2 140 Kbps
Writing application : AVI-Mux GUI 1.17.8.3, Feb 16 201019:42:50
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : Yes
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 1h 46mn
Bit rate : 1 620 Kbps
Width : 1 280 pixels
Height : 544 pixels
Display aspect ratio : 2.35:1
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.097
Stream size : 1.20 GiB (76%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio #1
ID : 1
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 2000
Duration : 1h 46mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 292 MiB (18%)
Alignment : Aligned on interleaves
Interleave, duration : 64 ms (1.53 video frames)
Interleave, preload duration : 192 ms
Title : UW 6ch audio
Audio #2
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 2000
Duration : 1h 46mn
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 97.4 MiB (6%)
Alignment : Aligned on interleaves
Interleave, duration : 64 ms (1.53 video frames)
Interleave, preload duration : 192 ms
Title : UW 2ch audio
This file is well played by PS3 Media Server.
I am quite confused with this issue ; did anyone experienced the same thing ?
Best Regards,Having the same problem. I'm watching all of my movies without subs now, because transcoding kills the 5.1 audio (no problems with 2 channel audio). A workaround is posted in the comments of the pms-svn package.
I will post the URL to this thread to another thread with probably the same problem (mplayer/x264). I have not yet seen a real solution to this, and I'm not really familiar with the bugzilla's from both projects.
Other threads with similar problems:
https://bbs.archlinux.org/viewtopic.php?id=112219 (devede also uses mplayer and x264)
https://bugs.archlinux.org/task/22654 (related bug in Archlinux)
http://bugzilla.mplayerhq.hu/show_bug.cgi?id=1865 (related bug in mplayer)
https://bbs.archlinux.org/viewtopic.php?id=115165 (this thread)
Another workaround might be to trick pms into using ffmpeg or vlc rather than mencoder. I'm also streaming to a ps3 - I didn't try it, but it could be as easy as temporarily changing settings inside the profile for a ps3-client.
Last edited by zenlord (2011-03-22 16:15:38) -
[svn:fx-trunk] 10506: New TLF file missing from svn 10505.
Revision: 10506
Author: [email protected]
Date: 2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
Log Message:
New TLF file missing from svn 10505.
Added Paths:
flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.asRevision: 10506
Author: [email protected]
Date: 2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
Log Message:
New TLF file missing from svn 10505.
Added Paths:
flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.as -
How to add a new created table to SVN repository
Hello,
I am using SQL Developer and Data Modeler both with SVN repository.
If I am adding a new object (fe procedure) in SQL Developer, I have a right mouse menu option to add the new object to SVN. This works fine. When adding a new object (fe table) in Data Modeler, there is no option to add this new object to SVN. Does anyone have an idea how to achieve this?
Data Modeler version 3.3.0.734
JoopHello Philip,
thanks for your answer, but the OLL wasn't very helpful.
I found an option to add the object: you can add the object using the pending changes. In the outgoing changes you will find the new object with the icon with + symbol. Here you can commit in SVN.
Joop
Maybe you are looking for
-
How do I add a photo to day one
I can't see how to add a photo to a day in Day One since the last update. There used to be a camera icon at the bottom of each day, now there is not. Please help. Thank you
-
Error while testing sender SOAP scenario from XMLSpy-but can test from RWB
HI, I developed one scenario with sender SOAP adapter and Receiver side ABAP proxy. Now I want to test my scenario. I tested my scenario successfully from RWB-->Integration server Integration Engine. ( it posted successfully and I can see checked f
-
Converting output into PDF in RFQ
Hi, Could anybody suggest me on how to convert an output generated through message determination into PDF form. The output can be seen in spool requests. Does any setting require for this?? Regards, Pradeep
-
I have tried to convert '30/08/2014 12:00:00 AM' to datetime for comparison however I keep getting 'The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.'. I have been doing research for the last 3 hours and
-
Persistent search connection not released
Hi, We are using DS6.1 and have set up two persistent search job using LDAP JDK4.1 to monitor some directory entry changes. During testing, we've found that client connections are not released on DS server when network problems caused the socket conn