[svn:bz-trunk] 18694: Checkin the JUnit test that was left behind in the previous check-in.
Revision: 18694
Revision: 18694
Author: [email protected]
Date: 2010-11-18 04:45:52 -0800 (Thu, 18 Nov 2010)
Log Message:
Checkin the JUnit test that was left behind in the previous check-in.
Modified Paths:
blazeds/trunk/modules/core/test/src/flex/messaging/io/amfx/DeserializationConfirmation.ja va
Noise on line problem now solved, here are my new stats - not really a great improvement over what I was getting intermittently, but at least now it seems pretty constant. Do you think this will improve over time or is there anything else that can be done to make things faster?
ADSL line status
Connection information
Line state
Connected
Connection time
2 days, 21:09:44
Downstream
1,344 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
15.1 dB / 14.0 dB
Line attenuation (Down/Up)
62.0 dB / 31.5 dB
Output power (Down/Up)
16.4 dBm / 12.3 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
9383 / 504
CRC Errors (Down/Up)
180 / N/A
HEC Errors (Down/Up)
N/A / 284
Error Seconds (Local)
110
BT wholesale perfomance test is giving me the following:-
Download Speed
0.9 Mbps
0 Mbps
1 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.9 Mbps
For your connection, the acceptable range of speeds is 0.2 Mbps-1 Mbps.
Additional Information:
Your DSL Connection Rate :1.34 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 1 Mbps
Similar Messages
-
Revision: 7891
Author: [email protected]
Date: 2009-06-16 13:38:37 -0700 (Tue, 16 Jun 2009)
Log Message:
Fixed bug in effects that was fallout from renaming offsets property to postLayoutTransformOffsets.
QE Notes: none
Doc Notes: None
Bugs: SDK-21839
Reviewer: Evtim
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-21839
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateTransfor mInstance.asLots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh. -
Revision: 8389
Author: [email protected]
Date: 2009-07-06 13:19:11 -0700 (Mon, 06 Jul 2009)
Log Message:
Removed a trace() statement that I left in TextFlowUtil's importFromXML() method.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Carol to review
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/TextFlowUtil.asRevision: 8389
Author: [email protected]
Date: 2009-07-06 13:19:11 -0700 (Mon, 06 Jul 2009)
Log Message:
Removed a trace() statement that I left in TextFlowUtil's importFromXML() method.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Carol to review
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/TextFlowUtil.as -
Hi I have taken my daughters iphone and wiped it and resetted it but it will now not let me activate it via itunes and will not even go onto the home screen of the phone so i can go to settings etc and i do not know what to do to enable the phone to be activated
"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked. -
Revision: 5137
Author: [email protected]
Date: 2009-03-02 10:28:59 -0800 (Mon, 02 Mar 2009)
Log Message:
Fix failing security tests on BlazeDS/trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new/clean session. It looks like some test methods were leaving some things in a bad state which was causing the next test that ran to fail. These may be legitimate bugs/issues so we should investigate further to see what sequence of events gets things into a bad state but for these tests we want all of the test methods to run in isolation.
Modified Paths:
blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/services-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/MessagingAuthProSendTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/MessagingAuthProSendTest.mxml
Added Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/src/qa/messaging/SessionManager.javaIn general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
Revision: 10459
Author: [email protected]
Date: 2009-09-21 08:42:44 -0700 (Mon, 21 Sep 2009)
Log Message:
Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking, etc.
Improving revision 10199 a bit, to allow for single line comments.
QE notes: None
Doc notes: None
Bugs: SDK-22027
Reviewer: Paul
Tests run: Checking, Compiler cyclones
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22027
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.javaIn general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
Revision: 12673
Revision: 12673
Author: [email protected]
Date: 2009-12-08 14:41:28 -0800 (Tue, 08 Dec 2009)
Log Message:
Integrating latest FXGUtils now that TLF 566 is in trunk (which includes a fix for TLF 2497992).
Changelist: 646928
Implementation-Title: FXG Compiler
Implementation-Version: 1.414471
BuildDate: 2009/12/04:03:06:24
Notes:
Made bitmap clipping implementation more efficient.
Bug(s) Fixed:
- #2491501 (Inconsistent word spacing results between MXMLC static and runtime compilation)
- #2492932 (MXMLC gets null pointer exception on this FXG)
- #2489341(FXG with a large BitmapImage results in a malformed SWF)
- Added code to break down straight edges whose dx or dy exceeds 65535 twips into smaller segments.
- #2495874 (many objects are missing in Opacity.fxg renders via MXMLC static compiler)
- FXGUtils now ignores gradient entries of more than 15 gradient entries.
- It logs warnings for such violations and continues processing.
QE notes: Yes, please remove whiteSpaceCollapse="preserve" from static FXG mustella test cases or please regenerate bitmaps.
Doc notes: N/A
Localization: No, there are just resource strings removed in this changelist, no new strings.
Bugs: N/A
Reviewer: Sujata
Tests run: Checkintests, mustella spark/core/fxg (25 failures all relating to tests that have whiteSpaceCollapse="preserve" but the reference bitmap do not expect this behavior and should be regenerated or tests modified).
Is noteworthy for integration: Yes
Modified Paths:
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGException_en.properties
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/swf/FXG2SWFTranscoder.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/AbstractFXGNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/ContentPropertyNode.j ava
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/fills/LinearGradientF illNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/fills/RadialGradientF illNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/filters/GradientBevel FilterNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/filters/GradientGlowF ilterNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/strokes/LinearGradien tStrokeNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/strokes/RadialGradien tStrokeNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXGSAXScanner.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/ShapeHelper.java
Added Paths:
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/PreserveWhiteSpaceNod e.java -
I have ran the diagnostics test on iTunes and iPod. The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability. What can I do? iPod nano 3rd generation. All updates are current.
It had not been used for awhile and most of the songs that were on there were gone when I turned it on. I was trying to sync to update the library.sklshrnk wrote:
It had not been used for awhile
Weeks, months, years? It's possible your battery is dying. Take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.
Syncing Music to iPod -
Warning: The disabled test "SomeTest" was removed from the test run.
Hello,
When I mark test with Ignore attribute, mstest show the next message: Warning: The disabled test "SomeTest" was removed from the test run. And I don't want to see this warning.
The question is: Is there any option to hide this warning, turn it off.
Sincerely,
AlexHi Alex,
I think I could repro this issue. For the Ignore attribute, it would share us this warning message by design when we run it in MsTest.exe.
You could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio.
The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can anyone help me find a song I heard over and over in St. Lucia in April, 2007? It was a reggae or soca song that was played regularly in the resort we stayed at and all over the island where we visited.
SeanD - message sent - any chance of a follow up
Getting Worse
. Best Effort Test: -provides background information.
Download Speed
13083 Kbps
0 Kbps
24198 Kbps
Max Achievable Speed
> Download speedachieved during the test was - 13083 Kbps
For your connection, the acceptable range of speedsis 12000-24198 Kbps .
Additional Information:
IP Profile for your line is -24198 Kbps
2. Upstream Test: -provides background information.
Upload Speed
1607 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 1607 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 2000 Kbps
We were unable to identify any performance problem with your service at this time. -
Every time We have been closing the browser for the last few days when we restart the browser, regardless of weather we shut down the computer or not, it reopens to the last page that was opened. I cleared out and deleted the history but it did not help.
Maybe you currently have your home page setting to "Show my windows and tabs from last time" instead of "Show my home page".
*Firefox button > Options > Options > General tab > Startup > "When Firefox starts"
*If using the Menu Bar: Tools > Options > General tab > Startup > "When Firefox starts"
*See --> [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page How to set the home page]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that is around 2 hours on my computer appears as 2003 minutes on my iPad. It's a smart playlist limited to 25 songs if that makes any difference. Is this happening to anyone else? Any help would be appreciated!
Greetings,
First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps. -
Error message: The data for filename was already added to the form
I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang -
test\
test
my friend playing"crime city hd" (he buy the stuff in that game for twices, but the third time can't, it's said to contact the itunes support to complete this transaction, about the credit card, he hv contact bank, said nothing wrong, pls adviseI suspect he needs to contact iTunes support
-
We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.
Maybe you are looking for
-
Can I install 9.0.3 Production on top of 9.0.3 Preview?
Can I unzip the 9.0.3 production version into the same directory as 9.0.3 preview? I want to make sure I don't lose 'mywork'. Thanks
-
Audio Dropouts on H.264 Quicktime movies playing from CD ROM or DVD ROM
I've been consistently having trouble getting H.264 .mov files saved on a CD-Rom or DVD-ROM to play back smoothly on Windows computers. The files will open, but there always seems to be sporadic audio dropouts, every 5-10 seconds the audio will drop
-
Need info about Hyperion Upgrade
Hi, I have below questions regarding the Hyperion upgrade. 1. Please let us know whether we can upgrade 11.1.2.1 to 11.1.2.3.500 2. Is the FDM 11.1.2.3.500 is compatible with EPM 11.1.2.4 (Essbase & HFM)? Thanks, Aravindh K
-
Best CC App for creating "animated" menu?
Picture this on the home page of a website: a rectangular frame (size irrelevant for this question), empty inside, every 2 or 3 seconds a new graphic/slide appears (transitions) inside the frame, each has text describing a page in the site; when you
-
Dear Experts, I have created Journal Entry Template with header Information Category,Group Time. I have entered one Journal Entry and saved it. While Posting the same, I am getting the error as follows Failed Reason: Write-back failed Write