[svn:cairngorm3:] 16326: Removing LCDS 2.6. x depedencies from Integration and IntegrationRPC libraries.
Revision: 16326
Revision: 16326
Author: [email protected]
Date: 2010-05-26 00:25:44 -0700 (Wed, 26 May 2010)
Log Message:
Removing LCDS 2.6.x depedencies from Integration and IntegrationRPC libraries.
(only IntegrationDMS is dependent on LCDS)
Modified Paths:
cairngorm3/trunk/libraries/Integration/pom.xml
cairngorm3/trunk/libraries/IntegrationRPC/pom.xml
Removed Paths:
cairngorm3/trunk/libraries/Integration/libs/fds-2.6.1.swc
cairngorm3/trunk/libraries/Integration/libs/fds_rb-2.6.1.rb.swc
Hi Nicolas, and Thx for the fast reply.
In fact I've solved my problems.
There were some namespace error (referencing bad/old cairngorm namespace) and I've forget the tags
<fx:Declarations>
<parsley:Configure/>
</fx:Declarations>
which is really stupid...
I've also have some trouble with module generation in the bin-debug folder (I don't know why but one of my module project didn't have the build part "flex application" correctly referenced (eg. the test application based on module was declared but not the module itself... so the module SWF was never generated...)
Now everything is working perfectly and I find the new Cairngorm really gorgeous ! Module is incredibly simple to create and set/gather, Observer/Navigation libraries are really helpfull and injection+event dispatching is genious
Many thanks !!!
Similar Messages
-
Revision: 11292
Author: [email protected]
Date: 2009-10-30 02:28:09 -0700 (Fri, 30 Oct 2009)
Log Message:
Removing 'libs' as a library path from the Flex Builder project properties.
Modified Paths:
osmf/trunk/framework/MediaFramework/.actionScriptProperties
osmf/trunk/framework/MediaFramework/.flexLibPropertiesRevision: 11292
Author: [email protected]
Date: 2009-10-30 02:28:09 -0700 (Fri, 30 Oct 2009)
Log Message:
Removing 'libs' as a library path from the Flex Builder project properties.
Modified Paths:
osmf/trunk/framework/MediaFramework/.actionScriptProperties
osmf/trunk/framework/MediaFramework/.flexLibProperties -
Revision: 16673
Revision: 16673
Author: [email protected]
Date: 2010-06-25 09:43:24 -0700 (Fri, 25 Jun 2010)
Log Message:
Removed selectors and tags, We are now using dispatchers and explicit event types to handle commands
Modified Paths:
cairngorm3/trunk/samples/insync/insync-basic/src/InsyncContext.mxml
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/RefreshSearchAfterSav eController.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/RemoveContactCommand. as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/RemoveContactIntercep tor.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/SaveContactCommand.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/SearchEvent.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ContactFormPM.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ContactsListPM.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ContactsNavigatorPM. as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ToolbarPM.as
cairngorm3/trunk/samples/insync/insync-basic/test/insync/application/RefreshSearchAfterSa veControllerTest.as
cairngorm3/trunk/samples/insync/insync-basic/test/insync/application/RemoveContactCommand Test.as
cairngorm3/trunk/samples/insync/insync-basic/test/insync/application/SaveContactCommandTe st.as
Added Paths:
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/AddContactEvent.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/EditContactEvent.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/RemoveContactEvent.as
cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/SaveContactEvent.asbleach wrote:
i see these
URxvt*background: #171717
URxvt*foreground: #B2B2B2
URxvt*color0: #171717
URxvt*color1: #3D3D3D
URxvt*color2: #ffffff
are not commented out
3d3d3d is for red but you have a blackish and color2 is for green but you have it white the rest should be the default colors. it uses the same colors only it changes the vairiant of the color you choice there or normally moc uses colors such as green blue and such which will call your console colors for those respective fields I know moc has /user/share/moc/themes/ that you can edit or make your own for instance copy one and edit it. I think htop uses the same color count which is 8 but with so green will be white when you use urxvt. 8 for normal colors 16 for bright dark and urxvt is 256 which is 16 but can use any of the 256 colors for 16.
just to clarify you have commented out your colors 4-15 and your green and red is weird, and htop aswell as moc is 8 bit. moc theme_yellow_red is default for background so it will use urxvts background
Haahaha, that is simple. And it works!!!
I didn't bother with commenting that because i thought they are not applied. Anyway, thanks man. My urxvt terminal si grateful to you and your thorough explanation. SOLVED! -
Removing adobe reader icon from excell and outlook
How can I permanently remove the adobe reader V9 icon from Excel and Outlook? I used toolbar customize to delete the icons but they come back when I restart the programs.
Sorry, your question is not clear. Can you give us the exact wording (or a screenshot) of that notification?
What is your operating system? -
Revision: 11376
Author: [email protected]
Date: 2009-11-02 11:39:44 -0800 (Mon, 02 Nov 2009)
Log Message:
Remove external image support from BitmapImage and BitmapFill.
QE notes: none
Doc notes: ASDoc updated. Any other docs that mention loading external images in BitmapImage, BitmapFill, or Border need to be updated.
Bugs: none
Reviewer: Jason
Tests run: checkintests, cyclone
Is noteworthy for integration: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/BitmapFill.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Border.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/BitmapImage.asThat PKGBUILD doesn't work, primarily because _svnmod is not set correctly. The remaining problems are mostly down to not being in the $srcdir directory when checking out the ImageMagick source. It's also good practice to copy the source and do the build in the copy. That way, it will be possible to successfully update the source and rebuild the package at a later date. Otherwise, the PKGBUILD certainly works with the following modifications but I've no idea whether the package is viable because I didn't try installing and testing it.
_svntrunk=https://www.imagemagick.org/subversion/ImageMagick/trunk
_svnmod=ImageMagick
build() {
cd ${srcdir}
if [ -d $_svnmod/.svn ]; then
cd $_svnmod
svn up
else
svn co $_svntrunk $_svnmod
fi
rm -r ${srcdir}/${_svnmod}-build
cp -r ${srcdir}/${_svnmod} ${srcdir}/${_svnmod}-build
cd ${srcdir}/${_svnmod}-build
if [ "${CARCH}" = "x86_64" ]; then
patch -Np1 < ../libpng_mmx_patch_x86_64.patch || return 1
fi
Etc., etc.
Last edited by azleifel (2010-04-11 22:15:09) -
Revision: 14372
Revision: 14372
Author: [email protected]
Date: 2010-02-23 15:17:18 -0800 (Tue, 23 Feb 2010)
Log Message:
PARB changes: Remove metadata from MediaContainer and LayoutTargetSprite constructors. Instead, metadata is set on LayoutTargetSprite via a non-public setter used by the framework. Update a bunch of ASDocs, make some enum classes final, remove elementIDs from sample apps (since they rely on metadata, and we want to keep samples focused on the public API).
Modified Paths:
osmf/trunk/apps/samples/framework/MediaContainerSample/MediaContainerSample.as
osmf/trunk/apps/samples/framework/NestedMediaContainersSample/NestedMediaContainersSample .as
osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as
osmf/trunk/framework/OSMF/org/osmf/containers/IMediaContainer.as
osmf/trunk/framework/OSMF/org/osmf/containers/MediaContainer.as
osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/CompositeDisplayObjectTrait. as
osmf/trunk/framework/OSMF/org/osmf/layout/HorizontalAlign.as
osmf/trunk/framework/OSMF/org/osmf/layout/ILayoutTarget.as
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutMode.as
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutTargetSprite.as
osmf/trunk/framework/OSMF/org/osmf/layout/VerticalAlign.as
osmf/trunk/framework/OSMFTest/org/osmf/containers/TestMediaContainer.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestLayoutRenderer.as
osmf/trunk/framework/OSMFTest/org/osmf/layout/TestMediaElementLayoutTarget.as -
Revision: 3418
Author: [email protected]
Date: 2008-09-30 10:24:48 -0700 (Tue, 30 Sep 2008)
Log Message:
Remove obsolete poll-sync responders from PollingChannel and other impacted protocol-specific channels.
QA: No
Doc: No
Checkintests Pass: Yes
This stuff was originally used by a PollingChannel to directly monitor subscribe/unsubscribe commands issued by higher-level components in order to drive a count of active subscriptions, and from that, whether or not the channel needed to issue poll requests.
However, DataService, and then Consumer ended up managing this directly because they had better insight into when they considered themselves subscribed and they notify the PollingChannel of their state changes directly (mx_internally). When this was added, the underlying poll-sync responder machinery didn't go away, and it generally doesn't cause problems except in the case of a client disconnect without a preceding explicit unsubscribe. In this case the higher level component moves to an unsubscribed state when it disconnects (and lets the PollingChannel know) but because no unsubscribe command is sent by a poll-sync responder, the extra count it added never decrements and the channel continues to poll incorrectly.
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/AMFChannel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/HTTPChannel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/NetConnectionChannel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/PollingChannel.as -
Revision: 3026
Author: [email protected]
Date: 2008-08-28 11:35:50 -0700 (Thu, 28 Aug 2008)
Log Message:
Bugs: LCDS-370 - Passing user credentials from Flex app to WAS 6.1 returns java.lang.ClassCastException
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-370
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/websphere/flex/messaging/security/WebSphereLoginCo mmand.javaPlease test with the new Java Plug-In available in 6u10 at http://jdk6.dev.java.net/6u10ea.html. The Java/JavaScript bridge has been completely rewritten and is now more complete and portable than ever before. Longstanding issues should be fixed with this new version. Please try it and post if you continue to have problems.
-
Revision: 13401
Revision: 13401
Author: [email protected]
Date: 2010-01-09 07:37:48 -0800 (Sat, 09 Jan 2010)
Log Message:
PARB changes: removing nesting capabilities from MediaContainer, and introducing a separate MediaContainerGroup class (that is not a MediaContainer) that now holds the functionality.
Modified Paths:
osmf/trunk/apps/samples/framework/NestedMediaContainersSample/NestedMediaContainersSample .as
osmf/trunk/framework/MediaFramework/.actionScriptProperties
osmf/trunk/framework/MediaFramework/.flexLibProperties
osmf/trunk/framework/MediaFramework/org/osmf/containers/HTMLMediaContainer.as
osmf/trunk/framework/MediaFramework/org/osmf/containers/IMediaContainer.as
osmf/trunk/framework/MediaFramework/org/osmf/containers/MediaContainer.as
osmf/trunk/framework/MediaFramework/org/osmf/display/MediaPlayerSprite.as
osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/MediaFrameworkTests.as
osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/containers/TestMediaContainer.as
Added Paths:
osmf/trunk/framework/MediaFramework/org/osmf/display/MediaContainerGroup.as
osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/display/TestMediaContainerGroup.asHi,
these concepts are used and implemented in jGuard(www.jguard.net) which enable easy JAAS integration into j2ee webapps across application servers.
cheers,
Charles(jGuard team). -
Revision: 9385
Author: [email protected]
Date: 2009-08-19 08:54:55 -0700 (Wed, 19 Aug 2009)
Log Message:
SkinnableTextBase.as - remove code to redispatch UPDATE_COMPLETE event from RET. For each property setter, even though they are just proxies to RET, call invalidateProperties() to generate UPDATE_COMPLETE events and add handler for the TextOperationEvent.CHANGE and call invalidateDisplayList() to generate UPDATE_COMPLETE events for RET size and display list changes. SDK-22705
TextArea.as - remove code to set scroller horizontalScrollPosition to off if "toFit". Need to do it "virtually" rather than actually change the scroller property. SDK-22680
RichEditableText.as
Changes to rememasureText() and measure() since not all combinations of constrainted width/height worked correctly, particularly if auto sizing. SDK-22727
Changes to textContainerManager_compositionCompleteHandler() to try to keep "contentWidth" seen by scroller constant if lineBreak="toFit" so the scroller doesn't think it needs to add a horizontal scroll bar. If the text is "toFit" there should never be a hsb. SDK-22680
Change to updateDisplayList() to scroll after updating the container if it was delayed when EditManager.updateAllContainers() last ran. SDK-22705
Removed default params from scrollToRange() since they don't make sense. SDK-22696.
Some cleanup based on TLF cleanup.
RichEditableTextContainerManager.as - in drawBackgroundAndSetScrollRect(), if auto sizing, should use the display list width and height for the scroll rect and background for the text rather than the content width and height. SDK-22727 and SDK-22678 ended up fixed too.
RichEditableTextEditManager.as - flag to know if scroll is needed after updating the container in updateDisplayList. SDK-22696
QE notes: be sure to make automated tests for SDK-22727, SDK-22705, SDK-22678 please
Doc notes:
Bugs: SDK-22727, SDK-22626, SDK-22680, SDK-22705, SDK-22696, SDK-22678
Reviewer: Gordon
Tests run: basictests, checkintests, TextArea, TextInput, NumericSteeper
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22705
http://bugs.adobe.com/jira/browse/SDK-22680
http://bugs.adobe.com/jira/browse/SDK-22727
http://bugs.adobe.com/jira/browse/SDK-22680
http://bugs.adobe.com/jira/browse/SDK-22705
http://bugs.adobe.com/jira/browse/SDK-22696
http://bugs.adobe.com/jira/browse/SDK-22727
http://bugs.adobe.com/jira/browse/SDK-22678
http://bugs.adobe.com/jira/browse/SDK-22696
http://bugs.adobe.com/jira/browse/SDK-22727
http://bugs.adobe.com/jira/browse/SDK-22705
http://bugs.adobe.com/jira/browse/SDK-22678
http://bugs.adobe.com/jira/browse/SDK-22727
http://bugs.adobe.com/jira/browse/SDK-22626
http://bugs.adobe.com/jira/browse/SDK-22680
http://bugs.adobe.com/jira/browse/SDK-22705
http://bugs.adobe.com/jira/browse/SDK-22696
http://bugs.adobe.com/jira/browse/SDK-22678
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextArea.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/SkinnableTex tBase.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextContainerManager.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextEditManager.asPotomac wrote:
check these bugreports :
https://bugs.archlinux.org/task/42505
https://bugs.archlinux.org/task/42353
it seems that this bug related to i915 chip ( or intel graphic card ) is fixed in kernel 3.18rc3 mainline ( we can find this kernel package in AUR )
there is also another and complete different bug when we use a kernel 3.17 and even 3.18 ( it's a random bug ) but with a similar effect : boot can hang ( the boot process suddenly stops ) :
https://bbs.archlinux.org/viewtopic.php?id=189622
https://bbs.archlinux.org/viewtopic.php?id=189324
downgrading to kernel 3.16.x is the workaround
I assume my computer is affected by one of these bugs. While I can get to the point where my window manager is loaded, everything almost immediately hangs (but doesn't freeze). Terminal windows become non-responsive and Chromium will refuse input. It's very weird. This happens with both of the 3.17 kernel updates but not in any of the 3.16 releases (including 3.16.7).
This is on an AMD system (cpu/gpu w/ open source driver). Overall 3.17 seems rather buggy. -
JDK + JRE installation from AUR, and OPENJDK6 removal...
Seems to me most of the discussion about this is outdated, so here I go:
I have been running into some issues with programming Arduino. Replaced my avr-gcc with avr-gcc svn, but to no avail. So now I'm going for the standard distribution package of Arduino on most, if not on linux, systems (MACOSX, Windows) that uses JDK and JRE from Sun Oracle. Got the PKGBUILD tarballs from AUR and successfully built my own JRE install, but here is my issue:
[denizen@FIDO-ARCH jre]$ sudo pacman -Rdu openjdk6 && sudo pacman -U jre-7-3-x86_64.pkg.tar.xz
checking dependencies...
warning: removing openjdk6 from target list
there is nothing to do
resolving dependencies...
looking for inter-conflicts...
:: jre and openjdk6 are in conflict (java-runtime). Remove openjdk6? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: eclipse: requires java-environment
:: netbeans: requires java-environment
So I'm assuming I need JDK as well, but when I build JDK from AUR I get:
[denizen@FIDO-ARCH jdk]$ makepkg PKGBUILD
==> Making package: jdk 7-3 (Fri Sep 30 00:45:39 PHT 2011)
==> Checking runtime dependencies...
==> Missing Dependencies:
-> jre
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.
So has anyone done this without issue already? Am I missing a step or command? I'm at a loss at the moment.
Last edited by reidel (2011-09-29 16:56:58)Now, can you tell me how to recycle the JDK packaged in the JRE AUR PKGBUILD script fetched from the internet? Its such a bother having to download it again when I already have a viable copy.
Edit: What I mean is reuse the JDK package gotten from Sun Oracle which currently resides in the src dir of my JRE AUR package build. I tried copying it straight to the src folder of the JDK builder, but to no avail... currently looking through makepkg wiki...
Last edited by reidel (2011-09-29 17:15:08) -
How to remove the sort function on the drill down and then save
how to remove the sort function on the drill down and then save in the change local view of the Query
Is it possible to change the porperties of any characteristic in the local view and then save?
If so please post the answer.I do not think that option is possible.
Regards,
Venkata Boga. -
Q:-
How can I remove my very old Apple ID from my Iphone 4S. The old ID is still staying on my mobile but that email doesn't exist anymore. I cant rest my mobile as everytime i tried it asks ID password which I don't remember.Hello mushysun,
Thanks for using Apple Support Communities.
If you did not sign out of your Apple ID on your iPhone before creating a new one, then you will need to sign back in with your previous Apple ID and then sign out. If you do not remember your password and do not have access to the email account, then you can reset your password by using the security questions.
If you forgot your Apple ID password - Apple Support
Have a great weekend,
Alex H. -
How can i remove my phone number from imessage and just use email address ?
Hi all
I've searched all the forums and still can't find an answer for what i need (what i think i need!)
I have an iphone without a data plan so whenever anybody who is registered with imessage sends me a message i will not
receive it until i am back on wifi.
What i want to achieve is to be able to receive sms messages from imessage users when i am not on wifi and then imessages when i am back on wifi.
My assumption is that if i can unlink my mobile number from iMessage and only have it associated with my email address that this should work, but i cannot seem to remove my phone number from imessage, in the settings > iMessage > send and receive it will allow me to un-tick the associated email addresses but my phone number is greyed out and will not allow me to untick.
On my home Mac i can go into messages app and deselect the phone number but not on the iphone.
One solution says to deregister my phone on https://supportprofile.apple.com/ which i have tried (i can't see how that would work anyhow as there is no phone number in that registration)
Any advice would be greatly appreciated,
thanks, AndyRegardless if using your cell phone number or your Apple ID email address, iMessage requires an internet connection via an available wi-fi network or via your carrier's cellular network. Without a data plan and no internet access with your carrier's cellular network, an iMessage addressed to your email address can be received only when your iPhone is connected to an available wi-fi network no different when an iMessage is addressed to your cell phone number.
You cannot deselect or remove your cell phone number below you can be reached by iMessage at with iMessage on an activated iPhone. The iPhone's phone number is activated along with your Apple ID. -
Help. Need to remove one of the listed QuickTimes from the "open with" menu
When I bring up the 'Open with' menu on an audio file I have QuickTime Player (7.3.1) and just below that I have QuickTime Player (7.2.1). I would like to remove the 7.2.1 listing from this menu. There is on one version on my computer (7.3.1). The last update must have placed the newer listing in this menu and left the older listing. Is there a way to remove the older listing from the open with menu?
Did you ever do an archival and install of your OS? If so, you have what is called previous system fold on your main hard drive. This is where you can find the player to the version. If not I guess what happen to you is strange...mmm... And I guess it could happen.
Maybe you are looking for
-
MY IPOD Touch has a permanent white screen. I am unable to switch it off or reset and it is not recognised in i-tunes thus preventing me from performing a 'restore' Any suggestions?
-
Last field not shown in MONI if its empty during content conversion-urgent
Hi All, I have my input structure like <RECORDSET> <EMPLOYEE> <FIRSTNAME> <LASTNAME> <PHONENUMBER> </EMPLOYEE> </RECORDSET> I have given my sender Conversion parameters like Employee.fiel
-
Where is the best place to buy second hand iPhones?
Someone said that Melbourne had the longest turnaround times for Apple service work. Let me tell you the guys at the St Kilda Apple Service Centre turned my job around in 2 days... but my question is where is the best place to buy second hand iPhones
-
GRMG Availability for the Adobe Document Services
Hi, in GRMG I have message: Scenario: ADS 001 001; status message: Reason for HTTP POST failure:HTTP communication failure. When I try oren URL [http://<server>:<Java port>/AdobeDocumentServices/Grmg/App] I had received message: 405 Method Not Allo
-
Hi experts, Could any one help me in solving this issue please............ I have installed CI and started DB installtion in windows 2003 server with oracle10g At the database statistics i got struck and could not rectify why this error happens brcon