SVN support

Is there any plugin to make Flash 8 support SVN(Subversion)
in "project"
I only saw that support FTP and Visual SourceSafe but none of
the others in site definition
is Flash 9(CS3) will support for others third party version
control system?
thankyou

As far as I know the only change in the Project panel itself
is support for Adobe Version Cue.
Of course, others have found ways to make Flash work with
their version control systems (
http://rantworld.blogs.com/flashlit/2003/12/version_control.html,
for example).
And some are using SVN:
http://osflash.org/admin/new_project
(just not in the Flash Projects panel itself...)

Similar Messages

SVN support in JDev 9.0.5???

Hi!
I was wondering if there's svn support on JDev 9.0.5.16.27? (our team has already tried cvs and didn't like it) I've been looking for some information about it, but I couldn't find anything. Could anyone help me with some urls?
In case there's no support, I'ld like to know if there's a lot of difference between jdev 9.0.5 and 10g in case we decide to migrate to this version.
Thanks in advance, have a nice day!

Duplicate : branches in Jdeveloper???

Svn support in Oracle BPM 10.3 Studio

I am trying to use the SVN support of the Studio, but for some reason, neither of the the SVN Interface happen to be installed.
In the menu, in Window > Preferences > Team > SVN the SVN inteface client appears:
SVNKit (Pure Java) Not Available
JavaHL (JNI) Not Available
Im running Oracle BPM 10.3.1 in Ubuntu 8.10
also JavaHL packages seems to be installed correctly (apt-get install libsvn-javahl).
Any idea? Is someone being able to use the SVN feature in linux?
Thanks
Pablo

Hi there
We use SVN with OBPM 10.3.
I had to disable the subclipse - Mylyn plugin before updating/installing the Installed products from Find and Install.
It worked.
HTH

SVN support in CFB leaves something to be desired

One of the nice features about CFB is its ability to link to source files outside of the project folder. I prefer this to what I would normally do in CFEclipse, where the project folder and the source folder were the same.
What's no so good is that I can't check in/out of files in SVN from the Navigator view that are linked in this way, which basically prevents SVN from having any use in CFB. Note this is for LINKED source files, not files that are in the project folder.
Possibly there's something config-wise that can be done with this - any suggestions appreciated.
Jeff

Product Review wrote:
Date: July 14, 2012
Rating: 3
My old DSL modem/wireless router had started to experience problems (requiring a power down a couple of times a week), so I decided to purchase a separate DSL model and wireless router. This one came from a name manufacturer and the price (since it was refurbished) was very good.
My old modem/wireless router (with g-band WiFi) wasn't strong enough to get to the other end of our house: we live in a ranch and the computer equipment is on one end of the house. I was hoping that wireless n would give better range, but didn't find that to be the case, with this device anyway. I've relocated it at a higher place (on a bookshelf) and sometimes get a usable signal in the other end of the house but it isn't consistent. I will say, however, that it is faster when I do have a signal.
I'm not sure I would buy this again. I might spend a little more and get a more powerful device.
Did you check if it's in the latest firmware?

Use SVN build number in my pom.xml in JDeveloper

I wonder if someone has already used the buildnumber-maven-plugin or any other way to insert the SVN revision number into their builds in JDeveloper.
The way I have found requires svn to be installed separately because there is a commandline call to svn, but I'd like to use the SVN support JDeveloper gives me, mainly because JDeveloper already has my connection available to the repository.
Who's done this before?
thanks!
Wendy

Hi Pittsburgh,
Thanks for your post.
Do you mean that you have added the custom activity in your build template to generate the custom build number, and the custom build number shows as expect in your TFS build result after build completed, but the custom build number doesn’t display in work
item Found in Build dropdown?
After the TFS build completed and the custom build number be generated, please check the
Builds-teamprojectname global list in your TFS Server, please check if the completed custom build number be added in that global list or not.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crash when using Dimensions version plug-in - key Failed to {0} file {1}

Oracle JDeveloper 11.1.1.3.0 (JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660)
Versioning Support (for Dimensions) 11.1.1.3.37.56.60
I've used "Versioning | Configure" to disable SVN support so that Dimensions is my only enabled extension. No matter what I have selected in the Application Navigator, I cannot get anything enabled on the 'Versioning' menu other than Download and Configure. If I download, I'm prompted to login (testing the connection works fine), and then the "Log Out" menu option is enabled, but no others.
I've got an application with one project that I've created and added to Dimensions via the Dimensions client. Attempting to download this project into JDeveloper using either the "Download" option from the versioning menu, or the right-click | download from the "Versioning Navigator" fails. If I do it from the Versioning menu, I get the 'Download' dialog and the OK button is enabled, but after entering a destination and clicking OK nothing happens (no error, dialog remains).
If I use the Versioning Navigator and right-click, I can select my Dimensions project, enter a destination, and click ok and a crash occurs. Details of the error are below:
Performing action Download...[ from oracle.jdevimpl.vcs.nav.VersioningNavigatorManager$2 ]
Invoking command: [ from oracle.jdevimpl.vcs.nav.VersioningNavigatorManager$2 ]
java.util.MissingResourceException: Can't find resource for bundle oracle.jdevimpl.vcs.dimensions.res.Resource, key Failed to {0} file {1}
j.util.ResourceBundle.getObject(ResourceBundle.java:384)
j.util.ResourceBundle.getObject(ResourceBundle.java:381)
j.util.ResourceBundle.getString(ResourceBundle.java:344)
o.ji.vcs.dimensions.res.Resource.get(Resource.java:23)
o.ji.vcs.dimensions.res.Resource.format(Resource.java:31)
o.ji.vcs.dimensions.session.DMVersionOperation.convertToDMException(DMVersionOperation.java:98)
o.ji.vcs.dimensions.session.DMDownload.downloadFolder(DMDownload.java:84)
o.ji.vcs.dimensions.nav.cmd.DMDownloadCommand$1.doInvocation(DMDownloadCommand.java:308)
o.j.vcs.spi.VCSDirectoryInvokable.runInvokableImpl(VCSDirectoryInvokable.java:199)
o.j.vcs.spi.VCSDirectoryInvokable.runInvokable(VCSDirectoryInvokable.java:117)
o.ji.vcs.dimensions.nav.cmd.DMDownloadCommand.invokeCommandImpl(DMDownloadCommand.java:258)
o.ji.vcs.dimensions.op.DMAbstractOperation$1.doCommitOperation(DMAbstractOperation.java:102)
o.j.vcs.spi.VCSDialogCommitter$1.run(VCSDialogCommitter.java:82)
Any thoughts?

I get that error too, only when checking in a new item.
Got it in Dimensions 2009R02 and 2009R03
/Kim

History stack in Dreamweaver?

A number of my students work in Dreamweaver CS6, and one of them accidently deleted a chunk of their php code last term during the final week, causing a lot of distress, obviously.
Which brings me to my question: in Netbeans there is a revision/history stack that automatically keeps track of all your changes to a particular file, and you can compare versions. In the above case that would have saved the student a lot of time and anxiety.
Does anyone know if there is an extension available that offers similar functionality in Dreamweaver? I looked a bit on google, but perhaps I am using the wrong search terms.
Here's a screen shot of aforementioned functionality:

Hi Nancy,
Yes, I know about SVN support in Dreamweaver, but was hoping for an extension that adds a personal file history, similar to the ones available in IDEs like Netbeans, PhpStorm, Eclipse, etc. SVN is great and all, but often a developer merely/also wants access to a local file history. Also very handy in a class situation.
I was just hoping that perhaps such functionality would be available through a third party plugin.

Help on java/j2ee application development framework

hello java-gurus,
I'm new to java and is working in java for just 15 months.i want to know more about the platform/framework which is used in the development of java/j2ee projects.To be more specefic i want to build a java/j2ee project .
-->The project will be located in the eclipse workspace.
-->The eclipse will be connected to the cvs and will save the latest code in the repository.
-->The project will have a build.xml file which on being executed
will check the latest code from cvs.
will run j unit test.
on success from the junit it will compile the project.
It will make a .war,.ear etc file..
It will then be deployed in the application server.
So i want to make a framework of this kind.So i want help from u guys how to proceed.
I'm just a starter with ant scripts .know how to clean,build and make war files ..I also know about eclipse like connecting to cvs,generating ant script from it etc..
i'm also comfortable with struts,java,servlet etc..
So do give me some guidelines how to proceed .
thanks

Hello,
i'm working in project same style of what you want. here are details :
- eclipse for development - lomboz plugins for j2ee support.
- using subclipse plugin for svn support checkout and commit, in case of cvs i think it is default in eclipse.
- the framework is Struts, which is a very very powerful J2EE framework.
- eclipse plugin lomboz supports creating and deal with struts project
it also offers GUI for configuring struts xml files.
- lomboz contains plugin for creating and define application servers and containers like tomcat and jboss, so you can compile, run and debug your code from your eclipse.
- i use many other tools for creating UML diagrams and ERD diagram and reflect contents to existing projects.
i think with struts,eclipse and lomboz you need nothing else.

Branches in Jdeveloper???

hello! I'm using JDeveloper with subversion, I want to create branches of a project. I read about a branches dialog which I cant find. I know there's a command, but I would like to work just in JDeveloper.
Do I need to update subversion or jdeveloper or collabnet to get it? I could use some help with tags too ;)
I have jdeveloper 10.1.3, svn 1.5.6 collabnet 1.6.1.2
Edited by: user1764541 on 28/05/2009 08:35 AM

Thanks!
I've tryed jdev 11g and it works fine, also its easier to integrate svn, but it needs 2gb and other requirements that doesnt meet the ones on our developer's computers.... I was wondering if there's svn support on JDev 9.0.5.16.27? (they've already tried cvs and didn't like it) I've been looking for some information about it, but I couldn't find anything. Could anyone help me with some urls?
In case there's no support, I also need to know if there's a lot of difference between jdev 9.0.5 and 10g in case we decide to migrate to this version.
Thanks in advance, have a nice day!

[svn] 3275: Initial check in for support for asdoc comments in mxml files.

Revision: 3275
Author: [email protected]
Date: 2008-09-19 15:01:57 -0700 (Fri, 19 Sep 2008)
Log Message:
Initial check in for support for asdoc comments in mxml files.
For adding comments at the class level or to properties defined inside mxml use the syntax
Other tags supported in asdoc should also work. for example @see, @includeExamples etc.
QA: Yes
Doc:
Reviewed By: Paul
Tests: checkintests
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationGenerator.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/MxmlCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/MxmlScanner.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/Node.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/ClassDef.vm
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Model.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/decl/PropertyDeclaration .java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/decl/UninitializedProper tyDeclaration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/ValueInitializer.ja va
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/ASDocConfiguration.java
Added Paths:
flex/sdk/trunk/asdoc/templates/images/AirIcon12x12.gif
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MxmlCommentUtil.java

@John - no luck on the plugin angle. In checking both JDev installs that previously had the problems, they have the default extensions.
@Dave - at the time I can't say we noticed any migration notices, we certainly didn't see the migration dialog though. However the application in SVN was built on the same version of JDev so I don't expect a migration to find any changes anyhow.
However on your second point we always check out into an empty directory, as we're checking out the whole application. As such if as you say the migration utilities is always called, shouldn't that mean we always see the projects modified? We certainly don't, we're on a day by day basis checking out whole applications to different directories and we don't see that behaviour.
In turn reconsidering the modified .jpr file, from what I saw it looks to me that the whole project file is re-set to it's original state. Initially the problem detected was the libraries attached to the project were gone so we couldn't compile, but in close inspection it seems the whole .jpr file has been modified to a rather vanilla setup.
One thing I can say when we originally experienced the problem (and from memory this was true in the dim dark past when it also occurred another time), is it was a check out from a SVN tags directory, not the trunk. In thinking about it, it may be the first check out from the tags directory that we see the issue. However to get around the issue we just revert the project file in the tags directory, we don't actually change the SVN repository code (ie. commit), so the issue should keep occurring. Yet at the moment if we check out the same tags directory, the issue doesn't occur?
Hmmm?
Btw Dave, are you an Oracle employee?
CM.

JDeveloper 11g & ADF: supported version of svn server/client question

Hi all,
I would like to setup a repository for our dev team, we are coming from jdev 10g with svn server 1.3.2 and tortise svn 1.4.8. After reading through John Stegeman's ADF Development Essentials documents, I noticed this article was published back in 2008 and the supported version at that time was 1.4x. What is the current supported svn server and client (i would like to use tortise svn in conjunction with jdev plugin) version for JDeveloper 11g?
Thanks,
Wes

Check out this: http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html
For 11.1.1.4:
Subversion 1.5, SVNKit 1.2
Subversion 1.6 2 , SVNKit 1.3 2
GNU CVS 1.11, CVSNT 2.5
Amit

[svn:fx-trunk] 11376: Remove external image support from BitmapImage and BitmapFill.

Revision: 11376
Author: [email protected]
Date: 2009-11-02 11:39:44 -0800 (Mon, 02 Nov 2009)
Log Message:
Remove external image support from BitmapImage and BitmapFill.
QE notes: none
Doc notes: ASDoc updated. Any other docs that mention loading external images in BitmapImage, BitmapFill, or Border need to be updated.
Bugs: none
Reviewer: Jason
Tests run: checkintests, cyclone
Is noteworthy for integration: Yes
Modified Paths:
 flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/BitmapFill.as
 flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Border.as
 flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/BitmapImage.as

That PKGBUILD doesn't work, primarily because _svnmod is not set correctly. The remaining problems are mostly down to not being in the $srcdir directory when checking out the ImageMagick source. It's also good practice to copy the source and do the build in the copy. That way, it will be possible to successfully update the source and rebuild the package at a later date. Otherwise, the PKGBUILD certainly works with the following modifications but I've no idea whether the package is viable because I didn't try installing and testing it.
_svntrunk=https://www.imagemagick.org/subversion/ImageMagick/trunk
_svnmod=ImageMagick
build() {
cd ${srcdir}
if [ -d $_svnmod/.svn ]; then
cd $_svnmod
svn up
else
svn co $_svntrunk $_svnmod
fi
rm -r ${srcdir}/${_svnmod}-build
cp -r ${srcdir}/${_svnmod} ${srcdir}/${_svnmod}-build
cd ${srcdir}/${_svnmod}-build
if [ "${CARCH}" = "x86_64" ]; then
patch -Np1 < ../libpng_mmx_patch_x86_64.patch || return 1
fi
Etc., etc.
Last edited by azleifel (2010-04-11 22:15:09)

[svn] 3203: Add support for inline two-way data binding (syntax is @{expr}) .

Revision: 3203 Author: [email protected] Date: 2008-09-14 05:11:47 -0700 (Sun, 14 Sep 2008) Log Message: ----------- Add support for inline two-way data binding (syntax is @{expr}). Also add support for two-way data binding via the <mx:Binding> tag and the new property twoWay=boolean (default is false). Code Reviewer: Paul QA: tests for this feature need to be added to the regression test suite Doc: new feature which needs to be documented Modified Paths: -------------- flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/analyzer/SyntaxAnalyzer.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AnonymousObjectGraph Builder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ModelBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ServiceRequestBuilde r.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/XMLBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/XMLListBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/BindingNode.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/TextParser.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/BindingExpression.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties

EvilDave UK wrote:
Surely there's a more practical way around this without having to reboot?
Before you go to the trouble of going through all those steps, be warned that attempting to use Dreamweaver CS4 with SVN could even cause Dreamweaver to crash after updating to SVN 1.6.2. I, too, have abandoned SVN integration with Dreamweaver until the problems are sorted out. I reported this problem to Adobe a couple of weeks ago, and spent a long time working with an Adobe engineer, who was able to reproduce the problem, but not offer a solution. Hopefully, the next version of Dreamweaver will have more robust support for Subversion.

[svn] 3045: Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

[svn:fx-trunk] 11454: ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items .

Revision: 11454
Author:   [email protected]
Date:     2009-11-04 18:17:33 -0800 (Wed, 04 Nov 2009)
Log Message:
ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items.
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run:
Is noteworthy for integration:
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/AsyncListView.as

SVN support

Similar Messages

Maybe you are looking for