Svrmgrl - disable password for connect internal
I have installed Oracle 8.1.5.
When I tried to create a database using svrmgrl manually, I entered the following:
svrmgrl
svrmgrl> connect internal;
Password:
Please advise how I can turn off the Password option for connect internal as in previous version of Oracle.
Thanks
Christian is absolutely right. The user must be a member of the
dba group which you identified as the default database grup
during the installation.
The default is dba. If you chose another group, run the installer
again and choose Perform Adminstration Tasks, relink the
executables and try again.
Peter CARON
Senior Technical Consultant
Oracle Internal Training
Munich, GERMANY
Christian Pomar (guest) wrote:
: M.Menzel (guest) wrote:
: : Hello linux-users,
: : if i start svrmgrl i have the ora-12546 error, and
: : i have no idea of the password from user internal!
: : Whats my fault?
: : Thanks
: : Mikel
: There is not too much information about your problem, but ...
: are you in the dba group? I you are working directly on the
: server and you are in the dba group, you should be able to
: connect as internal with no problem...
: Hope it helps.
: Christian Pomar
null
Similar Messages
-
ERROR: Could not encrypt password for Connection
Hi
I am trying to create and run demo application for 'Dveloping RIA using ADF and JDeveloper 11g'.
When I try to run the application it throws the error- ERROR: Could not encrypt password for Connection 'MyDatabaseConnection'.
Anyone please guide me how to resolve this issue.
ThanksCan you try delete the Connection and re-create another one to see if it fixes the issue?
-Arun -
Weblogic 10.3 deployException: Could not encrypt password for connection
Well, I guess this is my first time posting in a forum.
My problem is that, when trying to run my servlet, using a jdbc:odbc connection
to an Access-database, I get the following error in the server log:
Running dependency analysis...
2009-03-27 16:59:40.106: Writing WAR file to C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\TableViewApplication\TableViewApplication-tableviewproj-webapp
2009-03-27 16:59:40.12: Wrote WAR file to C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\TableViewApplication\TableViewApplication-tableviewproj-webapp
ERROR: Could not encrypt password for Connection TBLViewConnect.
The connection I'm using works fine when testing it with the JDeveloper's SQL editor.
It's properties are:
Connection Name: TBLViewConnect
Connection Type: JDBC-ODBC Bridge
as well as username, password and a local datasource
I'm running JDeveloper 11.1.1 on Vista 32bit
Besides, it's my first time using a database-connection with a servlet
thanks for your helpguess I could have found that earlier ;)
I just had to uncheck the "save password" option in the connection menu and write it in the getConnection() method instead. -
How to disable password for Diagnositics
Hi,
I want to disable the password option while I am doing Diagnostics. It is asking for password everytime when I select
Navigation Menu -> Help -> Examine -> Diagnostics
Please let me know how to disable this.
Thanks in Advance!!
Madhu KumarHi,
To disable password protection, set 'Utilities: Diagnostics' profile option to 'Yes'.
Note: 160151.1 - How to Make Help Diagnostics Examine be Password Protected?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=160151.1
Regards,
Hussein -
How to disable password for mount partitions
Hi.
I want disable password Aunthenticate for mounting partitions.
I searched in wiki and google. But nothing found.
Thanks.And/or https://wiki.archlinux.org/index.php/Udisks
What exactly did you search for? How did you not find these (and other) results? Or have you ruled these out? -
Disable password for privileged Exec mode via Telnet
I've looked around for an answer for this specific issue but haven't been able to find one yet. Hoping this is easy and someone can point me in the right direction.
When logging into a 2950 switch via Telnet, I'm prompted for a password when attempting to "enable" privileged mode. I want to disable the password requirement for now (home lab, not production). When I initiate the "no enable password" or "no enable secret" command (via a console connection), and try to initiate the enable command, I receive the message "% No password set". If I now attempt to enable privileged mode from the console, I'm not asked for a password. How can I disable the password prompt for VTY mode?
Thanks!Thanks for the suggestion; I've tried it but am still asked for a password.
From global config, I entered:
line vty 0 15
privilege level 15
exit
Am I missing any steps there?
Thanks! -
Can we avoid specifying User ID & password for connecting to LiveCycle server through code?
Hi,
I am developing a JAVA program that connects to the LiveCycle ES server to assemble two PDF files. Here is some part of the code I am using. The code works fine.
Properties connectionProps = new Properties();
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
If I do not use the credential info (user ID and password) I get some credential exceptions. Is there a way that I can avoid providing the credential information? The reason for this is I do not want to hardcode the user ID and password information as the password can change. Is there any other way to solve this issue?
Regards,
RaghaYou can turn security off from your process.
Go under adminui under Services/Application and Services/Service Management.
Search for your process and under the security tab you can disable the security or use the 'Run As' feature to run under a specific user context.
Jasmin -
How to disable password for free apps/songs?
Is there a way to disable having to enter your password in the App Store or on iTunes to download free songs or apps? I've looked all over in settings, so perhaps I've just overlooked it?
If you purchase again within 15 minutes of the first purchase it will not ask for your password. After that it will. I don't believe it can be changed.
-
Disable DSN for specific messages
Hi,
i have a problem, where i wish to disable DSN for specific internal users.
Scenario :
Interal User a sends a mail to special address c,
if mail host of special address c is not available or anything else i wish that internal user a is never informed that c didnt recieve his mail.
Can this be done ?
i thought about doing this with sieve.. but i dont know if DSNs generated by the IMS Master itself are also checked by sieve mechanism....Please do notice that your bits do not support many of the features you want. And that later bits do. If you offer that to your company, perhaps you could update more often, or at least this time. We're not talking about a new package, here, but just an update to the one you have, that's not doing the job properly.
Also, if you had asked for what you needed at the beginning, I could have helped you better.
What you want is the sieve command, save-copy, or, perhaps monitor. Please see whitepaper, quoted below:
Saving Messages for Document Retention
If the reason you want to capture a copy of the message is for document retention, then you will want to take advantage of the new "capture" sieve action. You have to have iMS v5.2 or better to use this facility. The capture action can only be specified in a system or channel sieve; it is not available in user sieves. The general syntax is
capture "monitoraddress"
The monitor action is the same as the capture action. Users are encouraged to use the 'capture' instead of monitor as it best reflects the function being performed.
This action sends a DSN containing the original message in its entirety to the specified capture address. Since this is a DSN it is effectively a completely separate message so there's little chance of it causing side effects that will alert anyone to the monitoring. In particular, no addresses from the original message appear in the DSN header so there's very little chance of the capture copy getting forwarded to the wrong person by mistake. And even though the original message is encapsulated, it is a MIME encapsulation which means the content is easily accessible in any MIME-compliant user agent.
The capture action is nonstandard and undocumented. It was originally intended to be part of the habanero release, but the backporting of direct LDAP support to 5.2 means it is available in 5.2 as well. We certainly intend to support it in the future.
Saving Messages for Replay
There is an undocumented functionality in iMS for making a copy of messages for archival purposes. It's intended for saving sent messages in the event that they need to be replayed. We did this for folks who send mail via bad links to places where the mail may be received OK by an intermediate host but then subsequently lost on its way to the final destination.
This is done with the MESSAGE-SAVE-COPY mapping table. Entries in that table have the form
MESSAGE-SAVE-COPY
out-channel|from-address|D|msg-filename result
where
out-channel -- name of the channel the message is flowing out
from-address -- originator's address (envelope From: address)
D -- the letter "D" (stands for "dequeue" )
msg-filename -- name of the message file being dequeued.
result -- where to rename the file
Outbound Traffic
To save only messages out to the Internet, do
MESSAGE-SAVE-COPY
tcp_local|*|D|/instance-root/queue/tcp_local/*/* (tab-or-space)$Y/msg_save/$1/$2
Be aware that the archive isn't made until the message is actually dequeued from iMS (i.e., sent successfully or bounced). A rename operation is done (as opposed to a copy operation). As such, the message file has to remain on the same disk that the IMTA_QUEUE lives on.
Inbound Traffic
To capture inbound mail will want to have good control of what machines/pathways a message will take on its way into your systems. If your setup is such that mail always enters the site via an INBOUND relay and leaves the site via know outbound gateways, then inbound message flow is from INBOUND-MTA --> MsgStore machine.
Since you can have multiple MsgStore machines behind any one INBOUND-MTA, you will want to make configuration on the INBOUND-MTA machine such that it will use a dedicated queue to talk to the MsgStore machines. For instance, on the INBOUND-MTA machine, you could setup a rewrite rule in your imta.cnf file for MsgStore-A, MsgStore-B, ... MsgStore-Z like:
Node-A.store.domain.com.au $U%$D@tcp_to_store-daemon
Node-Z.store.domain.com.au $U%$D@tcp_to_store-daemon
and a corresponding 'tcp_to_store' channel which looks like:
! tcp_to_store
tcp_to_store smtp mx single_sys subdirs 20 noreverse maxjobs 7 \
pool SMTP_POOL maytlsserver allowswitchchannel \
saslswitchchannel tcp_auth
tcp_to_store-daemon
This has the effect of routing all mail to any of your MsgStore machines through tcp_to_store channel. Transactions to other machines in your setup will take the tcp_intranet channel.
With this in place you can then throw in a MSG-SAVE-COPY mapping table which reads:
MESSAGE-SAVE-COPY
*|*|D|/instance-root/imta/queue/tcp_to_store/*/* $Y/msg_save/tcp_to_store/$2/$3
the net effect will be a number of queue files in the /msg_save/tcp_to_store directory which are ready for replay. Note the $2 in the sample represents the subdir that the message was already in. As such if you have 'subdirs 20' on your tcp_to_store channel, you will want to precreate the /msg_save/tcp_to_save/000 thru 019 subdirectories with the appropriate ownership and permissions.
To initiate the replay, you want to simply move the /msg_save/tcp_to_store/### directories to the /instance-root/imta/queue/reprocess and issue the command 'imsimta cache -synch'. The MTA will start pushing out those messages to the store(s).
If you want to have multiple replays happening you can kick off parallel runs of the reprocess channel by doing 'imsimta run reprocess &' a number of times.
And, If you want to segregate the storage for each MsgStore machine, you can make new channel in addition to the one suggested 'tcp_to_store' channel. You would then have groups of rewrite rules directing traffic over those channels or you could have one rewrite rule per channel block that you setup. That way you can have distinct entries in your MSG-SAVE-COPY mapping table.
Finally, since there is a rename operation taking place when you use the MSG-SAVE-COPY mapping table, you will want to make sure that at the first pass that /msg_save is on the same device that your queues live on.
Short Term Arvchival
You could setup a process in cron to move those files to a new device on a periodic basis. Better yet, schedule this via the job_controller. For instance, these lines at the top of your job_controller.cnf file:
[PERIODIC_JOB=archive_mover]
command=/usr/iplanet/sitescripts/arc_mover.sh
time=/00:10
will run the arc_mover.sh script for you every 10 minutes. Your arc_mover.sh could look something like:
#!/bin/ksh
# ***Script is untested - should generate some ideas though****
DUMMY=`test -d /var/tmp/timestamp.dir || mkdir -p /var/tmp/timestamp.dir`
cd /msg_save
# First pass
for dir in `find ./ -type d`
do
DUMMY=`test -d /real/storage/area/$dir || mkdir -p /real/storage/area/$dir`
cd $dir
for msgfile in `find ./ -type f -newer /var/tmp/timestamp.dir -name "*.00"`
do
mv $msgfile /real/storage/area/$dir/
done
cd /msg_save
done
touch /var/tmp/timestamp.dir
# Second pass cause we do not know how long we took.
for dir in `find ./ -type d`
do
DUMMY=`test -d /real/storage/area/$dir || mkdir -p /real/storage/area/$dir`
cd $dir
for msgfile in `find ./ -type f -newer /var/tmp/timestamp.dir -name "00"`
do
mv $msgfile /real/storage/area/$dir/
done
cd /msg_save
done
exit -
What User authorization objects needed for connecting to SAP from xMII?
We eneter a SAP user and password for connecting to SAP from xMII to retrieve the metadata of the incoming IDocs.
When I specify a user with SAP_ALL user profiles, the IDocs are received properly in xMII. If I specify a user with privileges to run only certain transactions, IDocs are not received in xMII.
What user authorization objects are needed for this user to connect to SAP from xMII?
Thanks,
SaraSam,
I turned on the SAP System trace for this user and figured out the following auth. objects are required for receiving IDocs in xMII:
C_TCLA_BKA
S_RFC
S_CTS_ADMI
B_ALE_MAST
S_IDOCDEFT
The following auth. object is required for making JCO call to SAP from xMII:
C_AFRU_AWK
Thanks,
Sara -
HT5625 I forgot my password for my icloud backup, how can I retrive?
I forgot my password on my icloud backup, how can I retrive?
There is no password for connecting a mouse. There's passwords for logging in. Perhaps passwords from waking from sleep or screen saver.
Perhaps you mean how do you pair it to your machine. If it works as it should go into your mouse system preferences and click the "Set up bluetooth mouse" button. -
Portal user creation- Disable password Option
Hi all,
Can i disable password for all my users.
we have an option to disable password while creating users.
i tried creating but it doesnot allow me to login with password field left balnk--it says "Authentication failed. Logon with password not allowed"
hariHi,
Disable password doesn't mean you can login without password. It doesn't allow the user to logon directly i.e., This deactivates password-based logon. This means that the user can no longer log on using a password, but only with Single Sign-On variants (X.509 certificate, logon ticket).
This is useful if you do not require password-based logon because logon is performed exclusively in other ways (such as using logon tickets, see SAP Note 177895). In this case, deactivating the password increases security, as passwords that are not used are usually still initial.Although the deactivation of passwords cannot be made retrospectively, the administrator can define a new initial password at any time.
Check this out.
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/0edf3d0eb8af5ee10000000a114084/frameset.htm
Regards,
Harini S -
How can I change password for ora8?
How can I change the default password for the default internal
account with password oracle 8?
nullwhere i find the orapwd and how i use it.
Use the tool orapwd80 to change the password for the internal account. -
Svrmgrl: connect internal requires password after system crash
Please help.
I'm running Oracle 7.3.4 on SunSolaris 2.6.
It seems we had a system crash.
Message when I try to restart the database
with the runscirpt (rtc2.d....)
"Database "SID" possibly left running when system went down (system crash?).
Notify Database Administrator.
Kennwort:
Kennwort:
SVRMGR> ORA-01031: insufficient privileges
SVRMGR> ORA-01031: insufficient privileges
SVRMGR>"
also when I attemting:
svrmgrl connect internal
I'm prompted for a password (Kennwort).
I don't know the password.
I tried it as root and oracle user.
Any suggestions or help?
Thank you.
nullIn the password file I set the password of the os
user oracle which owns installation.The Password for the password file is supposed to be the SYS password and not OS User oracle which owns installation.
I do not think the Oracle OS user password change is the problem. When you alter SYS password using the alter user command, it should change the password file automatically.
Try
SVRMGR> connect sys/sys_password as see whether it works. If it does not, then check other issues. -
I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Maybe you are looking for
-
My purchases are not showing up.
A bit of background: I had to wipe my hard drive and I don't have my itunes library anymore. When I went to download all my songs again, only 166 of them were shown to have existed and almost all of them were songs that I did not have on my ipod, bu
-
This never happened before. I have a table in a pages doc in which I have text to amend. The cursor will not click in the box and I cannot type or delete text. Any ideas?
-
My serial number is not registered in apple how to solve this problem?
My serial number is not registered in apple how to solve this problem? Cant update my free apps from the store due to discrepancies with the iTunes, with no reason, although they owe my a great deal of money
-
Problem with labelfunction with checkbox itemrenderer
I have a DataGrid with a column that looks like this: <mx:DataGridColumn headerText="Buy online?" dataField="onlineshop" itemRenderer="mx.controls.CheckBox" rendererIsEditor="true" labelFunction="checkBoxLabel" editorDataField="selected" /> My label
-
Servlet Applet object communication problem???!!!
Hy folks, I need to validate the ability of complex Servlet Applet communication an run into my first pb right at the beginning of my tests. I need to have around 200 Applet clients connect to my servlet and communicate by ObjectInput and ObjectOutpu