SW bug in E90 new SW: V 07.40.1.2

I updated recently my E90 to V7.40.1.2. It has got a problem, when I am working on any application (e.g. Maps) on the communicator and receives a call and tries to answer the call from the front cover, the front cover display remains dimmed!
Although the display shows the application I was working on and the ringing call, yet it remains dimmed till I answer and finish the call!

12-Dec-200707:54 AM
w00t wrote:
Thx for the reply.
I already figured out it's impossible to delete the app, but how do I get Nokia Maps working then?
I doubt downloading the Western Europe map is the solution, since I should already have it on the purchased sd card, or am I wrong?
The only thing I can do is pop in the sd card and go to Options, Extra Services, Add Services, Add Navigation, etc... and finally enter a licence code.
Is it really that simple? Is there a way I can check if it's really activated and/or check how long the license stays active?
*confused*
Unfortunately, it seems NOKIA is rather telling lies to the consumers on the E90 issue.
I was unfortunate enough to buy it two weeks ago and the NOKIA shop in Greece promised to install maps to it. They did not, telling me that they cannot help me.
After a lot of effort (find a machine with .NET, persuade it to recognise the phone as a mass storage device through USB, install Maploader from the web, etc.) I got a message on Maploader telling me that the version of maps my phone wants is not compatible with the version of maps the Maploader software could download, therefore no maps could be downloaded.
I have referred the problem to NOKIA Greece, but got no answer though telephone and neither through e-mail.
It seems to me that NOKIA tries to con customers by advertising non-existing facilities on the E90. The next step for me is to refer the case to the authorities here in Greece requiring compensation for faulse advertising.
Iannis

Similar Messages

  • A Bug with the new ms-6729 Bios (6729v5.30)

    Hi
    After updating my Bios to the new version, the motherboard detect my CPU(Athlon 2400+) as a 1800+.
    I tried to change settings manually without success.
    Anybody has encountred a similar problem?
    Best Regards

    Dir Sir,
    Thank you very much for your quick answer, but i believe you didn't try
    the mentioned Bios.
    I'm not a novice, i mounted more than 300 computers for my clients, and
    around 30 of last 50 computers are with MSI Motherboards.
    Cpu Fsb for Athlon 2400+ is 133 but the ddr/fsb is 4:5 because i'm using
    DDR 333 and the K7N2-V (MS-6729) is DDR 400 ready.
    With all MSI motherboards i mounted, it’s enough to put the correct CPU
    FSB and (Auto) to detect everything by the SPD.
    Certainly it's a BUG with the new version because the Bios and Windows
    detect CPU as Athlon 1800+ (1500) instead of 2400+ (20000.
    Best Regards,
    Lostan

  • How reporting a bug in the New Portal ?

    Hi,
    I found a bug in the new Azure Portal in preview, but I don't find how to report it to the team ?
    Thanks,
    Yan Grenier
    Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.

    I just find how to open a request, when I tried I selected "Technical" in request type, but I don't have support plan. But if I choose "Subscription Management" there are a free support.
    Sorry
    to
    not
    have
    look
    further
    before
    posting my question.
    Regards,
    Yan Grenier
    Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.

  • Downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

    downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

    You could just disable updates. Change these settings in about:config.
    * app.update.auto - set to false
    * app.update.enabled - set to false
    You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
    * http://sjc.mozilla.com/en-US/firefox/new/

  • Bugs in the new 3D graph (LV 8.6)

    I already posted this report in the Breakpoint board, breaking the rules...
    Therefore this is not exactly a duplicate post, since it should allow some discussion.
    I just downloaded LV 8.6, as I could not wait to have a look at the new long time awaited 3D graphs primitives, said to run also on MacOS. This is a GREAT new feature. The 3D surface graph works great, but I also found some new bugs (probably known already by the development team since they are pretty obvious, but who knows...).
    Additionnaly, I enjoy the idea that this seems to be the first LV 8.6 bug report in this forum.
    OK, here we go : (all the bugs have been found on a WindowXP machine)
    1 - As shown in the attached picture, a transparent cursor plane hide the 3D surface graph (but shows the axis)
    2 - As shown on the same picture, the boundaries of a cursor plane are locked to the axis values defined by the axis autoscale mode. The cursor plane appears much wider than the axis.
    3 - While in "perspective" mode, when the 3D indicator size is changed the graph switches to "orthographic" mode. An access to the property window is required to return to "perspective" mode.
    4 - after an access to the property window, the graph (perspective mode) in the Render window is streched to fit the window area, but returns back to a normal aspect ratio as soon as the window size is slightly changed.
    5 - As shown in the second attached picture, after a slight modification of the window size, the 3D surface is chopped of during a zoom-in.
    6 - When the 3D indicator size is streched, the graph is also streched. That gives the graph a poor look during rotation. In the old 3D activeX the aspect ratio of the graph was preserved.
    7 - (Not a bug, but a major lack of functionnality) I could not find a way to draw a 3D surface and a line on the same graph. This is easy with the old ActiveX and is a very usefull function when you want to represent the trajectory of an object moving onto a surface.
    8 - (Not a bug, but a strong inconvenience) A predefined color spectrum is lacking
    9 - (Not a bug, but a minor inconvenience) No logarithmic mode for the axis scales
    I better stop now since my wife is desperately asking me to pack my luggage before we leave for NIweek ! See (some of) you soon in Austin !
    Message Edité par chilly charly le 08-03-2008 08:20 AM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    3D graph (LV 8.6) bug1.png ‏83 KB
    3D graph (LV 8.6) bug 5.png ‏129 KB

    I wasn't studious enough : adding a line (problem #7 above) is easy : just drop another 3D graph on the front panel, this will brings in a new create_plot_line.vi on the diagram. Get rid of the additionnal 3D graph indicator, and wire the previous one to the new vi. See the attached graph, where two yellow lines have been drawn on each side the base of the peaks.
    Not yet possible to change the line thickness, but works nicely.
    I now have to customize my function palette to make the "native 3D graphs" directly accessible.
    One additionnal concern though : with the old ActiveX, it was possible (if not simple... ) to insert functionnal 3D graphs in Powerpoint presentations (see this thread). Is there any way to achieve a similar result with the native 3D graphs ?
    Message Edité par chilly charly le 08-03-2008 09:32 AM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    mix 3D graphs.png ‏6 KB
    mix 3D graphs2.png ‏73 KB

  • A potential bug on the new feature (12c) of Identity Column?

    Hi,
    I am testing a newly introduced feature of Identity Column in Oracle 12c. I used EclipseLink (JPA) to access the database.
    I may have found a potential bug with this feature. I am getting "ORA-30667: cannot drop NOT NULL constraint on a DEFAULT ON NULL column" when I try to insert a row. My code doesn't explicitly drop "NOT NULL" constraint.
    When I delete all the tables under the user and re-define the user and the tables, the error disappear.
    Here are the details:
    Error:
    DatabaseException Internal Exception: java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-30667: cannot drop NOT NULL constraint on a DEFAULT ON NULL column Error Code: 604 Call: INSERT INTO MyTable (ID, SOMEID, SOMEDATE) VALUES (?, ?, ?) bind => [null, 100100147, 2013-11-29 Query: InsertObjectQuery(cus.entity.MyTable@1a9ea5b)
    Table definition:
    CREATE TABLE MyTable (id NUMBER GENERATED BY DEFAULT ON NULL AS IDENTITY PRIMARY KEY,
          someId INT NOT NULL,
          someDate DATE NOT NULL,
          PARTITION BY range(someDate)
          interval(numtodsinterval(1,'year'))
          SUBPARTITION BY HASH ( someId)
          SUBPARTITIONS 20
           PARTITION p0 VALUES LESS THAN (TO_DATE('01-12-2013', 'DD-MM-YYYY'))
    Could anyone tell me if there might be a bug associated with the new feature or if there was something wrong with my code?
    I would be appreciated if anyone can help.

    "here is a reproducible test case in the SCOTT schema - if it reproduces for you open an SR with Oracle"
    Yes. I have just followed the instruction you posted and managed to re-produce the same error I reported earlier. Here are the details of the script output following your posted instruction:
    table MYTABLE dropped.
    purge recyclebin
    table MYTABLE created.
    1 rows inserted.
    table MYTABLE dropped.
    OBJECT_NAME                                                                                                                      ORIGINAL_NAME                                                                                                                    OPERATION TYPE                      TS_NAME                        CREATETIME          DROPTIME               DROPSCN PARTITION_NAME                                                                                                                   CAN_UNDROP CAN_PURGE    RELATED BASE_OBJECT PURGE_OBJECT      SPACE
    BIN$6NCDTxmXTb2QBpUWF0kGqw==$0                                                                                                   SYS_C0010655                                                                                                                     DROP      INDEX                     USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030808                                                                                                                                  NO         YES            98789       98789        98812          8
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:30:56 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98790       98789        98789          0
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                                  NO         NO             98833       98789        98789       1024
    BIN$Ka0sgN7XRBeCsjyXTQ76cA==$0                                                                                                   MYTABLE                                                                                                                          DROP      Table Composite Partition USERS                          2013-12-01:10:31:37 2013-12-01:10:32:17    4030812                                                                                                                          &

  • There's a bug on the new iMovie 1.2

    Sorry for bad English. If you have problems with my writing, please let me know that part.
    I don't know these '' things in correct English. I translated in into Korean->English.
    Hello, It's about location things in editing the movie.
    1) Select the theme 'simple' thing.
    2) Double-tap a clip and select 'subject style'thing.
    3) Tap 'opening' and insert the subject.
    4) Tap twice and tap 'location'.
    5) Edit the location name. e.g., '2011.3.13'
    6) Then, split a clip into two clips.
    7) Tap twice on second, behind, or splited clip. (what the **** is the correct language in this thing? I don't know it in my mother language either. I just named it 'the second clip'.)
    8) Then, edit the location to another name. e.g., 'When she laughs,'
    9) Then, see the first clip. It's also changed with the second clip. It's same when I edit the first clip, it changes the second clip, too.
    10) You can prevent this bug through, when edit the location name on second clip, tap 'locate button'(a button which can tell where here is), and change the location name.
    11) Then, you can see the first clip and second clip have different location name.
    When I make my movie, I use the 'opening style subject' on two clips. Both of the big subject have a name of that video, or characters. Usually I take the character's name on big subject.
    And for the small subject, on the first one, I put the date when I took it. On the second clip, I put the location or tell the content of the movie, like 'sub-subject'.
    You can see my videos on this: http://www.youtube.com/results?search_query=franceskisrevolution&aq=f
    and find the 4 things start with '코코먼지샤넬, ~~~하다', see the very first part of that subjects.
    It can tell better than my bad English.
    And, the conclusion is, FIX THAT BUG ASAP. It really annoyed me and two movies are already made with that bug before I solve the problem.
    Or, can you tell me how I don't caught on that bug no more, please?
    To tell this bug report for you, I needed to write these in my rough second language!
    And, I want PRECISION EDITOR RIGHT ON MY iPHONE. I promise, to buy the new iPad and I can use that function on my iPad, as soon as it ships? shipped? in my country. I loved the iPad but it's too old when it shipped on my country. iPad 2 is new, as you very well know.
    But I'll not use the iPad on my way to get around. For 20~60 seconds of video, I don't need that 4x big iPhone without phone. Okay? It's too much and I love apple's things because they are absolutely not 'too much', it's easy to use. Why you just disabled that very best cool thing on really cool app of iMovie, on that very smart phone? I really disappointed on it. Don't do that stupid thing again.
    Thanks.
    This is Korean version. If you have some Korean engineers, use this script and tell that iMovie makers. It'll be better than that rough English.
    테마 '심플함'으로 선택해서, 제목 넣을 때 오프닝으로 선택하고, 위치에 바로 내 맘대로 이름을 넣습니다. 그러고 나서 클립을 자르고, 뒷쪽 또는 두번째 클립을 선택합니다. 그러고 다른 이름을 바로 적어 넣으면, 앞의 잘려서 따로 있어야 할 클립의 위치 이름 또한 바뀝니다. 첫번째 클립의 이름을 바꿔넣어도 마찬가집니다. 이러면 제가 '위치'를 넣는 위치에 다른 것을 넣고 싶어도 계속 엉뚱한 부분이 바뀌니 미치는거죠. 그런데 '여기찍는' 버튼을 누른 다음 위치 이름을 바꾸면 또 앞의 클립과 뒤의 클립의 위치 이름이 달라질 수 있습니다. 그렇다면 같이 바뀌던 건 분명히 버그입니다.
    여기서 동영상들 앞부분만 확인하면 충분히 알 수 있습니다.
    http://www.youtube.com/results?search_query=franceskisrevolution&aq=f
    '코코먼지샤넬, ~~~하다' 라는 제목의 4개 영상입니다.
    앞부분만 보면 됩니다. 그럼 제목의 위치를 바꾼 것이 있고, 제목을 바꾼 것이 있습니다. 위치를 쉽게 바꾼 것은 아마도 무슨 버튼인지 보려고 먼저 눌러봤기 때문에 그리 된 것 같네요. 이미 제목을 바꾼 영상은 프로젝트와 원본 영상을 아이폰에서 삭제했기 때문에 이 방법을 알아챈 지금은 이미 새로 편집하기는 어려운 상황입니다. 그래서 이게 제대로 버그임을 확인한 순간 대학교에서도 아직 안 써본 영.어. 리포트를 여기에 쓰고 있습니다.
    반드시 이 버그를 다음 업데이트에서 고쳐주시고, 또, '정밀편집'기능도 빼지 말고 아이폰에도 넣어주세요. 아이패드 살거라서 아이폰에 바로 있어야 할 필요까진 없을지도 모르지만, 한국 출시까지 1달은 더 걸릴것같고, 그 전에 편집해서 올릴 영상은 100개가 넘습니다. 타이밍 맞추는 게 보통 일이 아닙니다. 프레시젼 에디터만 넣어줬어도 타이밍에 고생할 일이 없고 그래서 아이무비 업데이트를 기대했는데 왜 아이폰용에선 뺐는지 정말 이해가 안 되네요. 그런 멍.청.한. 짓은 하지 말라고 담당자들에게 알려주시기 바랍니다. 애플의 성공은 '쉽게 쓸 수 있는 어려운 기능'에도 있습니다. 그런 걸 포기해버리다니 정말 애플답지 않은 멍청한 결정이라 봅니다. 다신 그런 실수를 해선 안될겁니다.

    In these forums you are only talking to other users like yourself, not Apple. Be sure to repost your info in the channel Apple has set up for it:
    http://www.apple.com/feedback/imovie_iOS.html

  • Is chroma bug solved in new version of AME5.5 when transcoding to ProRes?

    About a year ago I had posted to the forums about a "chroma bug" observed by me and others when using Adobe Media Encoder v.5.0.1  to transcode AVCHD to Pros Res 422.   It would result in chroma bleed and a softer image versus a sharper transcode using Apple's Compressor.   I have attached a link here to my previous posting which shows jpeg images of what AME v.5.0.1 was doing to the image.
    Adobe Forums: For Adobe Premiere users encoding to...
    I would download a trial version of the new Adobe Media Encoder 5.5 (but I believe because it's a trial version that they disable transcoding from AVCHD feature).
    Are there any current users of AME 5.5 out there encoding to Pro Res?  If so, what have been your results? 
    My hope is that this chroma bug issue is solved for v.5.5 but I really have no definitive way to test it unless I purchase the upgrade...as the trial version won't allow me to transcode from AVCHD. 
    The catch 22 is that I didn't want to purchase the upgrade until I knew the bug was fixed.   I reported it to Adobe at the time of my initial posting but received no feedback or acknowledgement of the issue.  Most of my editing is done in Pro Res rather than natively...hence this is an important item for me.
    Thanks for any thoughts other users can share. 
    John

    as the trial version won't allow me to transcode from AVCHD.
    Sure it will. The CS5.5 trial now has all MPEG limitations removed, so you can fully work with all supported formats for 30 days in the trial.
    I seem to recall reading something about the chroma sampling bug being fixed, or at least, improved. But give the trial a shot and you'll know for sure.

  • A bug in the New Array(); code?

    Can anyone explain to me why this code:
    var myArray:Array = new Array(0119);
    doesn't work, but this code:
    var myArray:Array = new Array(0120);
    does?
    I've reported it to Adobe as a bug, because I can't see why a
    particular number causes an error.
    BTW, this same error:
    "**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 1: ')' or
    ',' expected
    var myArray:Array = new Array(0119);"
    also shows up using the number 0118.

    Thanks for the answer. I just got this e-mail from the Adobe
    bug report department which essentially says the same thing.
    "The compiler is getting confused because when you start a
    number with '0' it gets treated as a base-8 number. Since you can't
    have digits greater than 7 when using base-8 numbers, the compiler
    gets confused when you use a 9.
    Please use 119 if you meant to use decimal numbers. If you
    want to use
    base-8 numbers, then please convert 0119 to a valid base-8
    number."

  • E90 new version WHEN?

    Hello there,
    being a E90 user since almost 6 months now, i really can not understand why Nokia has not overworked the E90 yet.
    Hey guys at Nokia, are you sleeping? Every day i hear and read new users' opinions of the E90, how great the device is, but how bad it performs in terms of quality, how ugly the screen scratches are and how unusable the device is because of the microphone noise problem. However, it seems that even the newest devices (production October/November) do commonly have the noise problem again (Nokia said it was solved).
    Whats going on here? I can not believe how ignorant Nokias customer service behaves. There is a 1000$ smartphone and Nokia is unable to make is usable!?
    Just unbelievable...

    12-Dec-200702:54 PM
    sapporobaby wrote:
    You must be the only person that does not get how the mapping system work. It has been mentioned completely throughout this forum.
    Here goes again. The maps you download are topographical maps of a region, area, etc....
    Slight correction of the otherwise perfect description on the GPS functionality of the E90: the maps you download are vector street maps (topographical are maps that illustrate the contours of the landscape).
    12-Dec-200702:54 PM
    sapporobaby wrote:
    When you use the GPS system on the phone it gets updates to your location via the GSM network and the Satellites in space. Combined they give you your location plus or minus 10 meters. The only way to get this GSM is data is to......(say it with me) make a connection to the GSM network and download the info via GPRS/3G/HSDPA etc... (if you are inside, you can do the same via wifi).
    I wasn't aware of this--and I'll check to verify. I was under the impression that the packet data connection being formed was to download Points of Interest (which, apparently, isn't provided in the map downloads of Nokia Maps)--but I could be wrong.
    I found that an extremely easy way to check if the Nokia Maps download works properly is to simply turn the phone to the "offline" mode, and start Nokia Maps. When it says "allow network connect" simply say "No."... if the Nokia Map download works properly, you should still get the street maps... and be able to zoom out to see the entire downloaded area.
    Now back to the topic... Will there be an E90? I doubt it. The E90, unlike the communicator predecessors can have complete updates via firmware downloads. So there is no reason to make a "9210i" or "9290" version to give new software functionality to the "9200." From a hardware perspective, I can't think of much the E90 NEEDS. There may be some fixes (i.e., a new microphone or a new screen), but that will probably still be called just an "E90."
    I can believe, though, that a new E90 may be available if such a platform catches on in the U.S.--simply because some carriers here use a different frequency than the 3G networks in Europe. So I could see a U.S. E90 version akin to the "9290" coming, but I wouldn't hold my breath.

  • Mavericks bugs: open in new tab, slow type, slow Safari, slow wake

    I just upgraded to Mavericks in order to get Pages, which I needed for a project. Otherwise, Lion was working fine. Now, Safari seems slow, it often won't do the open in new tab click, it's slow sometimes when typing things in the web address area, and it has a slow wake-up (everything hangs there in black for a few before it finally wakes up). There's probably more, but those are the problems I've run into so far. Are these bugs that Apple is fixing soon? (Hopefully?!)

    I just upgraded to Mavericks in order to get Pages, which I needed for a project. Otherwise, Lion was working fine. Now, Safari seems slow, it often won't do the open in new tab click, it's slow sometimes when typing things in the web address area, and it has a slow wake-up (everything hangs there in black for a few before it finally wakes up). There's probably more, but those are the problems I've run into so far. Are these bugs that Apple is fixing soon? (Hopefully?!)

  • Old AppleWorks bug with a new twist

    Previously I posted
    "After upgrading to 10.5 recently, Appleworks when I select the "recent items" tab, I will hear the drive accessing for 13 seconds then the app disappears. After another 12 seconds I get the "quit unexpectedly" alert box."
    I was told this was an old bug and removing deleted files from the recent visit folder stopped the problem. I thought the problem was solved. No.......................
    The new twist is the following: I have some sparseimage files that are password protected. If I open the file, Appleworks keeps it in recent visits. Then when the sparseimage file is closed and AppleWorks is opened again, it crashes because it can't find the sparse image file open. BUT, in 10.4.11 under those exact same circumstances, the icon was greyed out but didn't cause a crash. My only solution now is to go into the recent items/starting points folder and delete the sparse image file to keep Appleworks from crashing the next time.
    This is a change of behavior between 10.4 and 10.5 and is a royal pain in the behind!!!!!!!!!!!!!!!!

    I have gone the plist route but the only thing that will solve the crashes is to physically delete the alias file in the recent file. Other situations with aliases (except AppleWorks) just say they can't find the original document. Escapes me why these aliases are now handled differently in 10.5 in this specific program.
    I have now made startup preferences (and what is seen when a file is closed) to be just showing the open dialogue. I will sacrifice the easy locating of recent files to having to remembering to delete culprit situations/having crashes.

  • E90 : New FW release ???? When =D

    Hi all,
    any news about the new FW release for our "future" perfect E90 ???
    I remember a date round 25th to 29th september... ???
    Domdom

    26-Sep-200710:52 AM
    vmoisa wrote:
    Instead of releasing a new FW update, what about releasing a new Communicator ? Let's call it 9700i, which would have all features of 9300i / 9500 plus 3G / HSDPA, 800 x something screen and 400 MHz processor. Would you scrap your E90 for this ?
    FW update is for free, new Communicator release means yet another amount of euros to pay !
    E90 would be OK if soft was correct !
    FW update should help it this way.
    Domdom
    Btw : If they can correct the E90 problems, a 9700i+++ may become my next one.
    If not I'll have a look at HTC !

  • E90 new firmware 210.34.75 Flash player problems

    After upgrading my firmware few weeks ago, all seemed to work fine.
    IN the mean time, after some backups, restores, new application installations etc i cant play Youtube movies anymore.
    The webrowser simply stops.
    I reinstalled the firmware 210.34.75. It doenst solve the issue. Factory resetted the phone with *#7370#. This doesnt solve the issue. Switched languages to english. Doesnt solve the problem.
    So what can i do to solve the issue? Is there an option to fully format internal memory?
    Plz help nokia

    Changes/improvements made from MCU SW
    version 07.40.1.2 to version 210.34.75:
    Release was done to enhance general SW maturity and stability, introduce upgrades to FlashLite and QuickOffices. Support for VoIP Clients added.
    Improvements to backup and restore
    * NITZ update improvements
    Active notes
    Improvements to sending and receiving notes via IrDA or Bluetooth
    Barcode reader
    * Support for 1-P codes removed
    * General stability improvements
    Bluetooth
    * Improvements to Nokia BT accessory interoperability
    and to 3rd party
    * BT accessory interoprability
    Browser
    * Flash Lite 3 i.e. YouTube video support
    * Widget support
    * Several improvements to browser stability
    Calendar
    Calendar restored from memory card
    Improvements to calendar fluency and stability
    Nokia E90 Communicator
    Camera
    * Automatic white balance fails with flash
    * Screensaver resets Scene modes setting from Camera
    Connections
    * Stability improvements to dialup and packet data connections
    FM radio
    Click Here To Have Your Say On This Story
    Stability improvements
    JAVA
    * Stability improvements
    Maps
    * Stability improvements
    Quickoffice
    * Stability improvements
    WLAN
    * Stability improvements

  • Minor bug in SMS - New Contact

    If someone texts me a phone number, and I want to create a new contact from the sms text, touching "create new contact" initiates facetime instead. If I click add to existing contact, the New contact page is displayed.

    Luc -
    Thanks for reporting this. I've filed bug 6111686 to track the issue.
    Regards,
    Lynn Munsinger
    Oracle JDeveloper & ADF Team

Maybe you are looking for

  • FB4 is not installing on Vista

    Hi All, I have a problem while installing the FB4 this is what the installer returns: Exit Code: 7 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 4 error(s), 1 warning(s) WARNING: Payload {7B

  • UPDATE TERMINATED ERROR

    Namaste Gurus, I am getting a paculiar error while after creating the sales order and out bound delivery while raising the invoice by using "VF01" I am getting an error " EXPRESS DOCUMENT UPDATE WAS TERMINATED RECIEVED FROM AUTHOR" and by igonring th

  • JSP import Statement importing a Class File giving ERROR

    Hey guys, There is a problem to which I dont know the reason, Consider the code below: <%@ import Converter, ConverterHome %> It gives me a Compile Time error of this type: '.' Required in import Converter ; but when i put these classes in a package

  • Link to attachment not working in Collaboration Task

    Hi All, We found an issue when we are attaching documents to a Collaboration Task which is created from a Collaboration Room: When we link documents that have been already stored in KM everything works fine. However when we use the direct upload at T

  • HT1349 what is the answer to my security question?

    how can i find?