Swapping of request through prompt selection

Hi!
can i swap the request with the help of propmt? My requirment is, in dashbord i have to give prompt selection and according to the prompt valve my request should be changed ,how can i achive it?
thanks
Deepak

Link????
That article will not talk about link..
it just displays the requests it self that you added in the dashboard sections, but depends on the prompt value you select the guided navigation properties are changes and will hide that particular section and will only show the section where the condition you specify is met...
Hope you are clear..
if not.. give clear idea what you want exactly?

Similar Messages

Request based on Prompt selections.

Hi All,
Please let me know if this requirement is feasible through OBIEE.
I have a dashboard Prompt which has three columns. These three columns are constrained as per the hierarchy.
Country
State
District.
I have three requests which show Region, Sales based on the Region
Request 1 : Shows District level sales
Request 2 : Shows State level sales
Request 3 : Shows Country level sales.
Now the requirement is:
a) When I select District only( State and Country as All Choices) or State and District or Country and State and District
then the lowest level only should be shown i.e. Request 1 should show up ( only for District).
b) When only State is selected ( Country and district as All Choices) or Country and State is selected then show only the State level request (Request 2).
c) When only Country is selected ( State and District as All Choices) then show only the Country level request ( Request 3).
That means based on the Prompt selection, only One Request should be shown in the dashboard any time.
Please let me know if this is achievable.
Thanks in advance.
Bhavik

Hi Bhavik,
Put each request in a seperate section and control which section is shown via Guided Navigation.
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Sending Outlook Meeting Requests through Outlook using JSP?

Hi all,
I'm trying to develop a web application that's able to invoke the Create New Meeting Request dialog from the client's Outlook (they are using Outlook 2002/2003), and populate some data from server-side into the Meeting Request, so that users can customize the Request if necessary and send it out.
Have looked at a few solutions as follows:
1) HTML's mailto
This is not good, coz the body can only accept plain text, whereas I need to be able to send HTML text (which Outlook can accept).
2) Outlook View Control
This was more hopeful, as I was able to invoke the new Meeting Request dialog. However still no way to send my data to the Meeting Request :-(
Basically, what I need is to be able to send a customized Meeting Request through some means, like for example getting Outlook to do it like the above, or sending out via some Java APIs (do they exist?)
Any ideas if the above is possible at all? Or if there are other ways to do this, other than relying on Outlook?
I'm open to any suggestions, even commercial solutions, since I'm quite urgently in need of options.
Note that I can't connect direct to Exchange (there are some solutions for doing that), because of some security issues which doesn't allow me to connect to the Exchange Server.
Thanks in advance for any advice!

Hi whartung,
Thanks for the reply! Appreciate it.
I think what you are suggesting is exactly what Outlook View Control is. Unfortunately, as I've mentioned, it seems that Microsoft did not give it sufficient controls to be able to pre-populate a new Meeting Request. You can only invoke the Outlook UI to create the Meeting Request, but there's no APIs to populate the new Meeting Request.
Have however found a possible alternative in the meantime:
Outlook supports iCalendar files which is a standard for calendaring information storage, and it is able to process a Meeting Request from an iCalendar file which contains details of the Meeting Request.
So what I'm looking to do is this:
1) Create the iCalendar file in the backend with Java.
2) Send an email to the user(s) who is intended to receive the Meeting Request, with the iCalendar file attached.
3) User clicks on the iCalendar file, which prompts them to process the Meeting Request.
Somewhat indirect, but gets the Meeting Request across, and all the 3 steps are actually possible.
Furthur to this, it opens up the possibility of sending Outllook Contacts (which supports iCard format) through similar mechanisms as well!

Error While Making a Request Through API

Hi everyone,
I'm trying to submit a request through the API for the "Assign Roles" template, I used http://java.net/projects/openptk/sources/svn/content/branches/Oracle/OIM11g/examples/java/OIMClient/src/oim/client/request/RequestRoleCreate.java?rev=1489 as a basis for my code. Pretty much line for line.
This is my code.
public static RequestStatusSummary[] applicationAccessRequest(String email, String templateName, String roleName) {
String userKey = getUserKey(email);
Beneficiary beneficiary = null;
RequestBeneficiaryEntity entity = null;
List<RequestBeneficiaryEntity> entityList = null;
List<RequestBeneficiaryEntity> entityAttrList = null;
// add role requested
entityList = new ArrayList<RequestBeneficiaryEntity>();
entity = new RequestBeneficiaryEntity();
entity.setEntityKey(getRoleKey(roleName));
entity.setEntityType(RequestConstants.ROLE);
entity.setEntitySubType(roleName);
entityList.add(entity);
// set beneficiary to user
beneficiary = new Beneficiary();
beneficiary.setBeneficiaryType("user");
beneficiary.setBeneficiaryKey(userKey);
beneficiary.setTargetEntities(entityList);
// add benficiaries to the request data
List<Beneficiary> beneficiaries = new ArrayList<Beneficiary>();
beneficiaries.add(beneficiary);
requestData.setBeneficiaries(beneficiaries);
System.out.println(requestData);
// submit request
String reqId = requestSvc.submitRequest(requestData);
RequestStatusSummary[] requestStatusSummary = requestSvc.getRequestStatusSummary(reqId);
return requestStatusSummary;
getRoleKey() and getUserKey obtain the correct values. Directly before calling this method I log in to OIM using OIMClient this works correctly as well. The issue is that submitRequest() throws this. Any suggestions would be greatly appreciated. Thank you for your time.
javax.ejb.EJBException: ; nested exception is:
     java.io.EOFException; nested exception is: java.io.EOFException
     at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:345)
     at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:826)
     at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:760)
     at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:941)
     at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
     at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
javax.ejb.EJBException: ; nested exception is:
     java.io.EOFException; nested exception is: java.io.EOFException
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.unwrapRemoteException(RemoteBusinessIntfProxy.java:121)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:96)
     at $Proxy6.submitRequestx(Unknown Source)
     at oracle.iam.request.api.RequestServiceDelegate.submitRequest(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
     at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
     at $Proxy7.submitRequest(Unknown Source)
     at testoimlogin.TestOIMLogin.applicationAccessRequest(TestOIMLogin.java:350)
     at testoimlogin.TestOIMLogin.main(TestOIMLogin.java:537)
Caused by: java.io.EOFException
     at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:345)
     at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:826)
     at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:760)
     at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:941)
     at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
     at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)

How are you creating OIMClient ?
Make sure that you are using proper OIM URL: t3://ManagerServer:MANAGEDSERVERPORT
getting error while calling RequestService interface

Can't highlight, underline, strike through or select text in iOS 7 Adobe Reader

I have enjoyed using Adobe Reader to proofread clients' documents, but since the last two iOS 7 updates I can't highlight, underline, strike through or select text in PDFs generated by the same source that previously presented no problems.
The drawing and insert text functions do work.
I am using an up-to-date iOS 7 iPad 4. The latest Adobe Reader update and a hard reset, as advised elsewhere on the forum, didn't help.
I have read What's New and looked at the Help manual. I am aware of the new long tap to select one word followed by another tap.
What am I doing wrong? Adobe Reader used to work so easily. I won't be paid for the time lost while I try to fix this. Any help would be appreciated.

Hi Krissy,
I found it extremely frustrating and I don't have a technically sensible answer for you.
Mine started working again suddenly, but slowly, after many hours of not working, and then improved in speed and responsiveness with use.
The conventional wisdom is to ensure you have the latest update of Adobe Reader first. There has been more than one since the iOS 7 change.
The first time it started working again for me was when I was trying in a pdf that I had previously edited in Adobe Reader before the problem began, where I know all the tools used to work (i.e. no problems caused by the file itself) but it is now also working in the new doc that wouldn't work the other day.
Shradha above gave me the clue that triggered it. I usually go straight to the "Pick a Tool" comment/annotate button in the main/first toolbar at the top, then use the toolbar at the bottom, where the highlight, underline and strikeout tools wouldn't work.
These functions started working when I tried selecting text directly from the first screen that has the toolbar for "View Modes" (an eye), save/export options, "Pick a Tool", share options and search, without selecting any of these options.
So, instead of choosing the Pick a Tool button at the top, try just holding down some text for a while, as if to select it (mine wouldn't even select for a long time) and see if the grey tool menu pops up right above that text.
Initially, I only got the options that were already working to pop up ("Note, Text, Freehand and Signature"). I tried a few different spots in the file and eventually the "Copy/Highlight/Strikeout/Underline/Define" menu popped up. The first time it apppeared was after holding down the text selection action for about 20 seconds, and it didn't appear every time, but then it became quicker and more reliable, and then these functions also started to work from the bottom toolbar that I usually use after choosing Pick a Tool.
Even today, checking that it still works, it was a bit stuttery to start with and then it came good.
Perhaps any of the technically-minded members could explain this or perhaps tell us if there is a difference in the action that is supposed to bring up the "Note" etc versus the "Highlight" etc pop-up menus. I'm stumped.
So try holding down text to select as soon as you open the file, and see if that grey menu will start to appear with the "Highlight" etc options after several attempts. I hope it starts working for you soon.
C

How to add Objects to transport request through FM/BAPI?

Hi All,
I am creating a workbench request through program. I am able to create it by using BAPI but i am unable to add objects to it through program.
Can anybody tell me the funcion module/bapi to add object to transport request?
i have the list of objects that are suppose to be added.
No BDC please.
Thanks ,
Swarup

Hi Swarup,
Check FM TRINT_MODIFY_COMM. Also look at program TH_TKANL for the usage of FM.
Thanks
Lakshman

Submitting concurrent request through oa framework page

want to submit a concurrent request through oa framework page and i wrote this code in controller
try
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
Vector param = new Vector();
param.add("21092008");
int reqId = cr.submitRequest("XXC", "XXC_DATE_VALIDATION_TEST_1", "XXC DATE VALIDATION TEST 1", null, false, param);
transaction.commit();
System.out.println("Request ID >>> "+reqId);
String id = "" + reqId + "";
HashMap parameters = new HashMap();
String url = "OA.jsp?akRegionCode=FNDCPREQUESTVIEWREGION&akRegionApplicationId=0";
//parameters.put("akRegionApplicationId", "0");
// parameters.put("akRegionCode", "FNDCPREQUESTVIEWPAGE");
//parameters.put("akRegionCode", "FNDCPPROGRAMPAGE");
parameters.put("requestMode", "DEFERRED");
parameters.put("requestId", id);
pageContext.setForwardURL(url,
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
parameters,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
catch (SetDeferredException e)
throw new OAException("Munish SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e)
throw new OAException("Munish RequestSubmissionException " + e.getMessage(),OAException.ERROR);
catch (Exception e)
throw new OAException("Munish Exception " + e.getMessage(),OAException.ERROR);
but i dont know whether it is submitted or not
when i find my request using request id through e bussiness suite i can see ant thing regarding this id
and i m getting this error
java.lang.NullPointerException
at oracle.apps.fnd.cp.viewreq.webui.ViewRequestsPageCO.processRequest(ViewRequestsPageCO.java:213)
could anyone help me please
Thanks

Check the "Adding Request Monitoring to Your Product" section from dev guide.
--Shiv

I can no longer scroll through app selections in Genius iPad

I can no longer scroll through app selections in Genius on my iPad in the App Store. I see the first row and half of the second row and cannot scroll. This is a new condition. Landscape or portrait is the same.

Just adding my voice as well.
Had this issue for awhile now. Believe it must have surfaced after last iOS update.
Quite annoying since Genius was a good way to quick browse for new app suggestions.

Error occured when giving down payment request through Tcode F-47

Dear All,
Following error occured when giving down payment request through Tcode F-47 by
inserting purchase contract in Purch. Doc. field :
Purch. doc. 4600000442 neither a purch. order nor a schedul. agmt.
Message no. ME703
please suggests
Regards
Shailesh

Hi
As error message states, you should put PO number instead of Purchase Contract number in downpayment request.
You can create a PO for that Purchase contract if you want purchase contract should also be used in that process.
Brgds
Abdulla

How to send POST HTTP Request through PI .

Hi ,
I am trying to send a XML mesage at HTTP server from SAP PI 7.1 .
but not able to , reason is HTTP guy telling me is that ,i am sending a get request through SAP PI 7.1 and it should be POST.
Where to change this this thing , so that only post request should go.
There is one more thing , i am facing following request only in Quality . In Development request is going as Post and every thing running fine ...
Regards
PS

It was always HTTP from our end , some config was missing at HTTP guys end , which solve the problem ..
So there was no issue at PI end.

Multiple HTTP requests through same connection

Hi...
I am writing an application which connect to its server through HTTP protocol and the server is basicaly a bunch of servlets hosted somewhere (Right not it in the tomcat running in my PC)
I know that with Connection Keep-Alive header you can keep the connection alive and do multiple requests from the same server.
Can some one point me to where can I find some sample code which shows how to send multiple requests through same URL conection or URL object. What i cant figure out is how to reset the URL connection or its streams a and make them send anotehr request message to the serverso server can respond.
Or do I have to do this manualy (using sockets)

You SHOULD be able to do a HttpUrlConnection method. However, I have hand-coded HTTP server and client apps and the keep-alive is rarely enabled in servers.
This is due to better handling of millions of unique hosts requesting, unlike a network os, which is made the other way around.

Incorrect data after activating the request through Process chain.

Dear SDN chaps.
Today morning. I encountered a strange issue in DSO..
I have DSO which is updating from the AL11(application server) flat file.
While i am loading it to PSA there were no issues and after loading it to the DSO there is no issue and its passing through the routine and the data is populating properly in NEW data Table .But after successful activation of the request through process i am getting the wrong records in active data table.
Then i deleted the request and reran it manually i mean triggered the DTP and ran the manual activation surprisingly accurate records are coming through manual process..
I am just wondering why it is not working through process chain and why it is showing incorrect records through process chain execution and how it is showing accurate records through manual uploading process..'
Could some one please help to come out from this..By the way mine is SAP BI 7 SP20 &SP05 for BW 7.01
Thanks
K M R

Hi Pra
Thanks for your response..
We are doing PSA deletion and then we are uploading the data to PSA as well as DSO.
Now the issue is not in the part of loading we are facing the issue in Actiation of request if i am executing the activation through process chain it is sucess but the values are incorrect. If i am doing the manual activation it sucess with correct data.
Even i tried with a new chain but still i am facing the issue.
Surprise thing is in new data table the data is perfect in both the ways like manual upate and Process chain update only during activation i am getting incorrect record in the active data table..
Appreciate your help on this....
Thanks
K M R
Edited by: K M R on Jul 9, 2010 11:09 AM

Re: (forte-users) HTTP request through proxy server

Daniel -
No, it does not. ;)
How do you say to HTTPRequest to go through proxy?
Thanks,
Taras
Daniel Nguyen wrote:
>
Hi,
It works very well. I have experienced this model for a distant Forte client
calling a Forte Server service Object for instance without any environment
and without TCP access (passing through firewall for instance).
It has also worked very well to make an injectot to improve Web Enterprise
and IIS using the SendRequest from HTTPAccess.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Taras Katkov a écrit:
HTTP request through proxy server using forte HTTP library?
Any experience?
Thanks,
Taras
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

You can also use the HTTP-DC project.... You don't
need Web Enterprise for this. From what I can tell,
this is available in L.x on....
There is api documentation in M.2 (with scant
examples.)
There's a special process to put the project in your
repository (it isn't installed in the repository in
the standard install,) the documentation in M.2
(probably in M.0 too, AFAIK) that tells you how to do
this (look for HTTP-DC in the online help.)
I haven't done much with it yet, I've just installed
it. If anybody out there has examples, that'd be
great. I'll try to contribute more the moment I get a
chance to explore it....
Christopher Fury
BellSouth Communications Systems
--- Daniel Nguyen <dnguyenclub-internet.fr> wrote:
Hi,
If you have Web Enterprise, you can user
HttpAccess.SendRequest().
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Amin, Kamran a écrit:
Is there any way to make a HTTP request from TOOLto another HTTP Service?
thanks in advance.
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. Tounsubscribe, send in a new
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

Need to Display columns depending on the prompt selection

I need to show the only the columns as per the prompt selection given by the user.
Suppose there are 5 prompts say (first name, last name, phone number, address, DOJ). All the prompts should be optional. If the user gave input for first name and last name then only this two columns must be displayed in the report.

Yes it is possible but you will have to write down formulas for these columns.
First add all required object in your report and format them in your report.
Now say you want Last name to appear when you user enters last name in prompt.
Write down following formula
Report Detail Area
=If(UserResponse("Last Name"))="USER INPUT" Then [LNAME]
For column Heading you can use
=If(UserResponse("Last Name"))="USER INPUT" Then "Column Heading"
The same pattern may be applied for other columns.
Regards,
Bashir Awan

Create Credit Memo Request through txn. FB65

Hi Experts,
I want to create Credit Memo Request through txn. FB65.I am using Bapi 'BAPI_ACC_DOCUMENT_POST' to create it.
Can anyone please tell the the minimum parameters which I will pass in this BAPI to create CreditMemo Request?
Helpul answers will be rewarded by points.
Thanks
Naveen Rana

Hi Naveen,
You run this BAPI by giving input till you get the result and then use it in your code.
Some of the structure to post credit memos are
*--Populating Header strucuture
*--To upload the Header Structure required By BAPI
wa_docheader-bus_act     = c_bus_act.
wa_docheader-username    = sy-uname.
wa_docheader-header_txt = wa_lineitem-header_text.
wa_docheader-comp_code   = wa_lineitem-header_company.
wa_docheader-doc_date    = wa_lineitem-invoice_date.
wa_docheader-pstng_date = sy-datum.
wa_docheader-fis_period = '00'.
wa_docheader-ref_doc_no = wa_lineitem-invoice_number.
wa_docheader-doc_type = wa_lineitem-document_type.
Document type is KR for Invoice and KG for Credit Memos.
*--Populating Accounts Payable table
*--Populating Currency Item Structure
Thanks
Sudharshan

Swapping of request through prompt selection

Similar Messages

Maybe you are looking for