SWF files in InDesign for export as Interactive PDF

I am creating an interactive PDF file which contains a multi-state slide show with navigation buttons that I created in InDesign. Since that will not display and "work" in an interactive PDF I exported a .swf file of the slide show to place in the final InDesign page layout. The interactive PDF works just fine when viewed in Acrobat, but the .swf file of the slide show moves around and changes scale depending on the view scale in Acrobat so that it no longer stays where it was intended in the InDesign layout. I suspect that I exported the .swf slide show from the InDesign file incorrectly but I can't figure out what the peoblem is.

What version of InDesign? Is it fully patched?
There was a bug in the initial release of CS5 that caused this type of behavior but it was fixed in a dot release.
Bob

Similar Messages

Is it possible to place a video into a circle frame for export as interactive PDF?

I've been trying to figure out how to embed video files into a circle shape frame for export as interactive pdf. Every time I export the document as interactive PDF, the video frame reverts back to a rectangle shape. Basically what I'm attempting to do is embed a .gif like animation of a face (saved as mp4 because it's my understanding that PDF can't support gif files) in a circle frame that plays on document load when exported as interactive pdf. Any suggestions, bypasses, solutions would be much appreciated.

Correct! Good solution!
But you missed a couple steps in your directions:
(1) Make a rectangle filled with Paper color.
(2) Make a circle filled with None (this will be the mask for the movie).
(3) Move the circle over the rectangle. Select both and choose Object > Path > Make Compound Path. This creates a paper-color rectangle with a hole.
(4) Position the rectangle-with-hole object over the movie to position the mask.
(5) Use the Buttons and Forms panel to make that object into a button. Give it an action of playing the movie.
(6) Choose File > Export > PDF (Interactive).
It works because the button (which has interactivity) is atop another object which has interactivity (the movie).
Brilliant!

InDesign crashes every time I export to interactive PDF??

I am using InDesign CS6 on Windows 7 professional.
I have restarted the computer several times. CS6 is all up to date.
I have experimented on several existing documents as well as brand new documents. It makes no difference.
Interestingly, InDesign DOES export the interactive PDF just fine, I can open it and it works. However, before the document finishes processing, InDesign pops up an error message saying that InDesign has stopped working and must shut down. So when I have many PDFs from various files to export, it's a major pain to have indd crash & recover documents every time.
Files crash no matter what the content, I've tried new doc with only a yellow circle. I've tried new doc using only system fonts.
I've never used interactive PDFs before today, so I have no idea if this is a recent problem or not.
Any help greatly appreciated, thanks!!
-Tia

Peter, ID is patched to version 8.0.2 & I followed the steps to replace my preference (and confirmed they were deleted) and I'm still having the same issue of ID crashing whenever I export an interactive PDF.
I've tested it on all four of our computers here, and it does it to everyone--so I'm guessing it's something system-wide on our part. I am going to trying uninstalling some plugins that we all have and report back later.

How do I add a zoom function to a digital magazine (.swf file) in InDesign CS6?

Hi,
Im creating an interactive digital magazine for our company which will go on the iPad, but also online for computers.
The iPad (.folio) has zoom functions, but on screen (.swf) the magazine is very static and peaple can't zoom and scroll (the zooming buttons function in InDesign doesn't work here).
So, how do I add a zoom function to a digital magazine (.swf file) in InDesign CS6?
(I read older posts regarding this problem in CS5... It's not possible for me to purchase an additional product for that. I have Flash, if there is a tutorial on how to do it, that'd be helpful too)
Thanks for your help!
Best regards!

Although the help implies this should work, and I've seen it written in a book to do things this way, it's not how I do things:
var content_req1:URLRequest = new URLRequest("text/hales.txt");
var content_ldr:URLLoader = new URLLoader(content_req1);
content_ldr.addEventListener(Event.COMPLETE, onComplete1);
Instead, try:
var content_req1:URLRequest = new URLRequest("text/hales.txt");
var content_ldr:URLLoader = new URLLoader();
content_ldr.addEventListener(Event.COMPLETE, onComplete1);
content_ldr1.load(content_req1);

InDesign document as an interactive PDF for mobile devices?

How can I export an InDesign document as an interactive PDF for mobile devices?

Avoid SWF at all cost and export using Adobe PDF (interactive).
The experience will depend on the PDF reader that the user has installed.

How do I use an Edge Animate project with SVG files in InDesign for DPS output?

Is there any way to include an Edge Animate web content using .svg files in InDesign for output to DPS?
Edge Animate works great with InDesign, except for when you're using SVG files. I've worked with SVG files on the web successfully (writing .htaccess files and such), but it seems like InDesign doesn't like them.
This is pretty important because I don't want to have to design multiple renditions on the DPS suite. Currently I have it setup as a PDF format (DPS) and that scales all of the vector-based type perfectly. It would be wonderful if the animations could also be in a vector format so that when the iPad (3) users see the designs, they will scale naturally through the PDF framework.
Any advice would be invaluable.
Thanks!

moved to the DPS forum....

Open a URL link in the same window as SWF file in indesign CS5

Hello,
I am trying to create a SWF file using indesign CS5. I have created buttons and placed in URL links but they always open another window. I would like to know if there is a way to have the URL open in the same window that the SWF file has been created. I tried, putting "_self" to target it in the URL bar, but nothing works.
Thanks in advance
TK

Okay, I found the code but I can't get it to work locally. If you have a web server maybe you can upload the files (swf and html) after you Publish them:
import flash.net.URLRequest;
import flash.events.MouseEvent;
var myURL:URLRequest = new URLRequest ("http://www.google.com");
testlink.addEventListener(MouseEvent.CLICK, clickText);
function clickText(myevent:MouseEvent):void {
navigateToURL(myURL, "_self");
you have to have on the stage a link element called "testlink" (see the code above) which would be a Movie Clip with the label testlink. It can be anything from InDesign: a button, a rectangle, a circle, a graphic, you get the idea. Just select that object in Flash and label it testlink or anything you choose but if you change the name from testlink also change the name in the code snippet where the line "addEventListener" is.

Indesign CS5.5 Crashes when exporting an Interactive PDF

My InDesign CS5.5 continues to crash when trying to export an Interactive PDF.
It begins to come up with a box titled WARNING but it all closes and i don't even see the error message.
Will it work if I deactivate and reactive? will that work by any chance?
Its really frustrating.
Yasmine.

Please upload the crash report to http://pastebin.com and post a link here.
I saw the "Replace, or "trash" your InDesign preferences" thread but am confused as to what I need to delete vs. rename or move.
It's teh same as the vulcan nerve pinch you tried -- I assume InDesign prompted you to delete preferences and you said OK.
What happens if you create a new document and Pages (panel) > Move Pages pages 1-83 to the new document, and then recreate 84 and 85 by hand? Does it work? Presumably this is document corruption of some sort.

CS6: Exporting to Interactive PDF Freezes

Hi guys, I'm relatively new with InDesign and currently I'm having a problem with exporting to interactive pdf. My version is CS6 8.0.1
I'm drafting a booklet for a school and each page looks something like this:
The picture here shows page 28-29 (top) and 30-31 (bottom). Each of these are linked AI files. These AI files have linked jpegs or psd files in them, with types and basic vector objects.
Then I tried exporting to interactive pdf -->
however, InDesign keeps freezing around these page ranges:
I cannot click cancel nor anything except force quitting InDesign. Tried again, same thing happened. I thought maybe I was too hasty so I went to grab dinner which took about 30 minutes. Walked back into my room, InDesign never completed the export, so I force it to quit again.
After a few times, I'd thought the problem could be with the AI links in page range 30-31 where it keeps getting stuck. I experimented by deleting 4 linked AI files on top of page 30-31:
And now I can export to interactive PDF successfully. I opened up the pdf with Acrobat Reader and everything seems normal.
So I'd figure that there's a problem with one (or more) of the four removed linked AI files. But just to be sure, I tried exporting it again [i]without the 4 linked files[/i]. This time though, the same problem occured - InDesign freezes while exporting PDF and I can't do nothing but force quit the program.
I then tried exporting page 1-29 by itself (the range which seems to be fine) multiple times - no problem. I've exported page 1-29 five successive times in a roll with no problem.
Then I tried exporting page 30-35 (the rest of the book), then here's what confused me even more. I can export it successfully the first time. The second time though, InDesign freezes again.
I then tried exporting page 30-35 over and over to see get a feel of ratio between successful vs failure. The result is erratic. I failed once, then successfully exported page 30-35 three times in a roll. After getting three successful export, I tried exporting the whole book again - to my surprise, this time it went through. Checked the pdf with Acrobat Reader, everything looks fine. Then I tried exporting the whole book once more, and again, it's successul. However, the third time I tried exporting the whole book, the program freezes again.
Now I'm not even sure what to think. What is root of the problem? Is it InDesign itself, or is it the linked AI files toward the end of the book? To give you more information:
- the first 29 pages are not entirely consisted of linked AI files unlike page 30-35. Page 1-29 overall is lighter while Page 30-35 consists off linked AI files that take more space
- I've updated all the links. There's no links with triangle + exclamantion.
- I use iMac 10.8.5 3.4 GHz Intel Core i7 16 GB
I can continue working for now since I've successfully exported a copy for my client, but it bounds to happen again. Any advice is appreciated, thank you!

Hi Ankit, thank you for your reply.
I've managed to update InDesign to 10.8.5 from 10.8.1
I downloaded the newest version of AAM, and after installing it, the updates under help menu in InDesign finally notified me that there were updates to be made.
Back on exporting to interactive pdf issue, still doesn't solve the problem.
If I export the whole document it keeps freezing; however, if I split by exporting page 28-31 (pages where it usually get stuck) by itself, then exporting the rest without page 28-31, then it works. I can get around it so it's not a big problem anymore, but I'd like to get answers to why InDesign would behave this way. Was the overall file too big so it froze? Would be nice if in the future I don't run into a similar problem - it takes time for me to export different sections of the book to avoid the program freezing, then it takes more time for me to merge two pdfs into one.
Here's what I've done so far:
- clear InDesign preferences
- disable Extensis plug-in
- migrate the pages to a new document
- update to newest InDesign version
- save as IDML then re-export
- package, then re-export
- first-aid on disk utility on my OSX (no problem found)
- delete all unused styles
- change all the embedded .ai files to .pdf (not editable)
If someone else has any idea, please advice. Thank you

Disable "Export to interactive PDF" default

For some reason, when I click on "Save Book to PDF", the "Export to interactive PDF" comes up automatically. This happened for the first time today, though I have never used that function. The problem is, I need to use my presets, but there is no way to access them. When I try a single file, there is no problem, but the Book just won't let me get to my presets.
     I have a PC, Windows 7, InDesign CS6, and Acrobat 10.1.6.
     I am really in a panic here since I have to get the PDF to the publisher and am stuck...

Yes, the "Export to interactive PDF" pops up without my asking for it, and when I "Cancel," the whole process cancels.
I tried PRINT BOOK and then PDF, but I could not choose the presets that way.
     Oooh, I got it. I missed the little open at the bottom of the SAVE dialogue box. It must have defaulted to that after the latest Acrobat update. Sorry for the stupidity.

InDesign CS6 not tagging interactive PDF

I don't know if I am doing something wrong but I can't get InDesign to export a properly tagged PDF.
Can anybody please try the following steps and confirm the results:
Create a new document in InDesign
Draw a text box on the document
Type "Text" in the text box
Create new paragraph style called "My heading"
Under Export Tagging in the Paragraph Style Options select "H1" under PDF->Tag
Add the text box to the Articles panel
In the Articles panel fly out menu activate Use for Reading Order in Tagged PDF
Export document as Adobe PDF (Interactive)
In the Export to Interactive PDF options window both options for Tagged PDF are checked
Open the document in Acrobat Pro
Open the Tags navigation pane
Expand the tag hierarchy
If the document is tagged correctly one of the tags should be labeled <H1> . Instead min is labeled what I called it within InDesign <My_heading>. This is essentially making larger documents with multiple heading levels inaccessible.
Can anybody else confirm this issue or provide a fix (other than manually changing tags from within Acrobat Pro)?

I tested in InDesign CC. (This bug would not be fixed in InDesign CS6.)
I can confirm that this bug is still in InDesign CC (see illustration below).
I don't know how to fix this except manually in Acrobat. (I don't normally work with accessibiility issues.)
I'd suggest reporting the bug here:
Adobe - Feature Request/Bug Report Form

InDesign CS5 Book to Interactive PDF

Hi all,
Now in InDesign CS5 there is a more convenient option under File > Export... to make interactive PDFs with links, buttons, etc.
In exchange, in the traditional PDF Presets export workflow there are some changes, in the dialog box. Now there is an option "Interactive elements" and two options: "Export appearance" or "Not include".
That means that when I am dealing with an InDesign document with buttons, if I choose to make the PDF with the traditional way, I have to choose either if preserve just the appearance of buttons (but they no longer work) or just exclude them. OK...
Then I use File > Export... and choose Interactive PDF, then everything it's just OK.
BUT.... I am making an InDesign CS5 Book, where every file involved has buttons. In the Book window, I can export the whole book to PDF, but using the old-fashioned way that either includes just the appearance of buttons or excludes them! I'd like to export my Book into a fully interactive PDF
So what can I do? or what am I missing?
Thanks a lot in advance.
Ignasi

When you choose to export the book out of the ID Book file, choose Interactive. The same settings come up as exporting the interactive PDF out of the individual ID file.

InDesign or Lifecycle to Interactive PDF

I am new to InDesign and LyfeCycle
I have put together a PDF Form that is interactive with dynamic navigation menu buttons on a master but have run into several roadblocks.
1) While I can get the Acrobat 10 Form Wizard to work perfectly and recognize the placeholder fields when the PDF is only three pages, it stops recognizing the fields when the it has 28 pages. I really dont want to have to add all the fields in on the Acrobat side. I tried layers and they didn't work. The wizard only recognizes the navigational buttons but not of the fields. We will be making frequent updates to this file and I dont want to draw 28 pages of radio boxes.
2) Is it possible to program the PDF so that when I select a particular item off a drop down, that it will show/hide defined pages based on the selection? So if I select product a and c from the PDF drop down, only pages 5,6,7 and 12,13,14 show up in the PDF? Everything I have been reading says probably not from InDesign. Some discussions say it can be done in LifeCycle but then dont tell me how.
3) When I import the PDF into LifeCycle it loses the master design and the navigational buttons from InDesign.
4) Can I solve the problem with JavaScrip in Acrobat? Do I have to use LifeCycle? What doesn't LifeCycle import InDesigned Masters from PDF?
Any ideas?

When you choose to export the book out of the ID Book file, choose Interactive. The same settings come up as exporting the interactive PDF out of the individual ID file.

How can i get to see a video UNDER a layer rectangle and a text box when i export an interactive pdf?

I'm trying to set a video as background of a page.. it all works as far as i watch the preview of that page, but when it comes to export the interactive pdf all i can see in that page is the video -.-''
please HELP!

this is what i see when i'm in indesign
this is what i get when i export -.-''

Every time I try to save my Indesign document as an Interactive PDF, the option of either saving it as Interactive PDF or PDF is not showing.

Every time I try to save my Indesign document as an Interactive PDF, the option of either saving it as Interactive PDF or PDF is not showing.

You export to PDF, not save.

SWF files in InDesign for export as Interactive PDF

Similar Messages

Maybe you are looking for