SWF plays in preview but not in browser

http://e-supplylink.com/
The SWF file works pefectly fine in the previewer but on the site the file doesnt. If the file was working properly it would be seen under the "Integration Specialists" header. Can somebody please point me in the right direction??
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="90">
                    <param name="movie" value="Logos.swf">
                    <param name="quality" value="high">
                    <param name="wmode" value="opaque">
                    <param name="swfversion" value="11.0.0.0">
                    <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
                    <param name="expressinstall" value="../../../Scripts/expressInstall.swf">
                    <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
                    <!--[if !IE]>-->
                    <object type="application/x-shockwave-flash" data="Logos.swf" width="150" height="90">
                      <!--<![endif]-->
                      <param name="quality" value="high">
                      <param name="wmode" value="opaque">
                      <param name="swfversion" value="11.0.0.0">
                      <param name="expressinstall" value="../../../Scripts/expressInstall.swf">
                      <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
                      <div>
                        <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                        <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
                      </div>
                      <!--[if !IE]>-->
                    </object>
                    <!--<![endif]-->
                  </object>

The code posted above is not the code used on that page:
Above shows:
<param name="movie" value="Logos.swf">
and
data="Logos.swf
while code on page has this path to the .swf:
<param name="movie" value="../raw images/flash/Logos.swf">
and
data="../raw images/flash/Logos.swf"
see the diff?
And as Martin pointed out, the path to the express install (which can install the flash pluggin) is most like wrong also. But, you really don't even need to use that. But you do need to get the path to Logos.swf right.
http://e-supplylink.com/Logos.swf
is the correct path by the way (the code you posted above...Not what's on the site).
Adninjastrator

Similar Messages

  • SWF plays in preview but not when published

    I have seen similar issues posted but none dealing with this
    precise problem. I have two SWFs, one of which loads at the end of
    the other. When SWF 1 is played back in Flash or when published in
    HTML format, SWF2 plays as is should. When SWF is exported to
    another program (e.g. Frontpage or Ektron, CMS), SWF2 will not
    play. Interestingly, when SWF2 is exported to the other program on
    its own, it plays fine so font support is not an issue.
    I have also tried altering the level in the LoadMovieNum
    script (0, 1, 2) as well as republishing both SWFs from the
    original FLA file. So far zippo.
    Any ideas??

    At least on my side it only plays the first video and does not progress.  There are twenty-five videos after this, they are all very short  but they progress.   Is this progressing for you?  Perhaps it is my computer if so. Please let me know.
    Thanks again,
    Mark.

  • Flash plays in preview but not online

    My flash video plays fine in dreamweaver and in preview just not when loaded to my hosting server. Which makes me think it but be file target related.
    Any help would be appreciated
    Site is at www.florencevilleagltd.com
    AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','498','height','325','src','webslide','quality','high','flashvars','flashlet={imageLinkTarget:\'_blank\',captionFont:\'Verdana\',titleFont:\'Verdana\',showControls:fal se,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:10,transitio nsType:\'PixelDissolve\',titleColor:#333333,slideAutoPlay:true,imageURLs:[\'1200gallon.jpg \',\'ck27 HST right side(1).jpg\'],slideLoop:true,frameThickness:2,imageLinks:[\'www.florencevilleagltd.com/p arts\'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','flas h_component','ImageViewer.swc','movie','webslide' ); //end AC code
                </script>
                  <noscript>
                  <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="498" height="325">
                    <param name="flash_component" value="ImageViewer.swc">
                    <param name="movie" value="webslide.swf">
                    <param name="quality" value="high">
                    <param name="FlashVars" value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showC ontrols:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:1 0,transitionsType:'PixelDissolve',titleColor:#333333,slideAutoPlay:true,imageURLs:['1200ga llon.jpg','ck27 HST right side(1).jpg'],slideLoop:true,frameThickness:2,imageLinks:['www.florencevilleagltd.com/par ts'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}">
                    <embed src="webslide.swf" quality="high" flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',s howControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSi ze:10,transitionsType:'PixelDissolve',titleColor:#333333,slideAutoPlay:true,imageURLs:['12 00gallon.jpg','ck27 HST right side(1).jpg'],slideLoop:true,frameThickness:2,imageLinks:['www.florencevilleagltd.com/par ts'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="498" height="325"> </embed>

    I uploaded the js file to the site root folder now and changed the
    <script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
    Still not loading

  • Swap images works in preview but not in browser

    Hi everyone,
    I am attempting to get a swap images to work.  It works in the preview window but not when I preview it in the browser.  When I open it in a browser the states seem to "cycle" through really quickly in rapid succession.  I have linked my png file for you to see.  Any thoughts?
    Thanks,
    denbeck

    Your swap image slice is set to Animated GIF. Change it in the Optimize panel to plain GIF or PNG 8
    Jim Babbage

  • Menu audio will play during preview but not when disc is burned.

    Encore CS6.
    Menu music plays fine in preview. I know that the file is good. No menu audio after disc is burned. Have tried several different transcoding options. There is menu video too that is working fine.

    Here are notes I couldn't find before I posted that; just general re testing methods:
    Mounting an iso (or building to a folder) is a great way to test.  There are some differences, but it is a great method prior to burning to a disk.  The main difference is simply computer vs dvd player - autoactivate on a button doesn't work with a mouseover, and you can be fooled into thinking your navigation does, or does not, work.  (Even on the computer, don't use the mouse for testing, use the "remote" in the player controls.)
    Encore preview is an emulator, like computer DVD players, that attempts to predict what will happen when a disk is played on a set top DVD player. It has always had issues with some predictions not being accurate. Some inaccuracies are like this one: Encore preview does not work, and a burned disk will. Others are the opposite; it works in Encore preview, and not in a DVD player. The point to be made here is that you cannot rely on Encore preview. You also cannot rely on computer playback of a built image or folder. And, in the end, you cannot rely on playback on one DVD player - some disks work on some players and not on others.

  • Music player shows & plays on preview but not online

    Hi. I'm using a Windows 7 laptop. I'm trying a quick & dirty update on an old site, so I'm updating the music clip(s) player, 3 actually.  They show up and play the clips in Dreamweaver, they show & play the clips when I preview from Dreamweaver using Chrome, Firefox and IE browsers.  But when I uploaded them online the players show but the music clips don't play(!?!).  The clips are between 2-5 mins.
    I thought Windows did something funny like make the files look back to my local drive, so I copied & pasted from "my documents" window & uploaded the files again overwriting them from an XP desktop.  Still nothing.  Help, please.  This is a portfolio piece, but I don't want to spend too much time on it more than I have already.  The page can be found at http://www.pinkturtle.us/felicite/sample.html
    Thanks,
    VB

    Hello everyone.  Thank you very much for your advice and help -- and your time looking into this project for me.  I really do appreciate it.
    Gramps, the folder wouldn't show anything if one types in that url directly because there are no html files there, right?  Only my music files (m4a (which are mpeg 4 audio files that worked on ie5 and play when previewed through Dreamweaver)) and music playlists, which reference said audio files, are there, oh and maybe a txt file or two.
    Hans would a server have issues with m4a files now if they haven't before?  In any case, I have replaced the 1st player's "playlist" with just 1 aria bypassing the m3u playlist altogether.  The second player goes to one of Charlotte Church's pieces as an mp3; the last player has the playlist m3u extension.  These m3u files, mp3 & m4a files are all in the folder called music_samples.  They are referenced from this experimental/mark-up page: http://www.pinkturtle.us/felicite/samples_fr.html
    And, it works in Chrome -- when browsed through Dreamweaver. (I'm having no luck with IE...)
    So what's up w/ that?  It was all working from my laptop last week.  I can't imagine what I did to this site.
    Again, all your help is appreciated.
    VB
    Message was edited by: VB after re-testing.

  • .SWF Links work in Preview, but not in Browser

    I'm sure this question has been asked plenty of times before, but i can't seem to find the answer. I have created an advertisement with Flash CS6, Actionsript 2.0 (because it has a pageflip). When i test the file on my computer I can click on a Button that I created and it pulls up a webpage. If I upload that same .SWF file to the webserver, the button doesn't work. I have adjusted the Publish settings so that Local playback security is set to "access network only", and still it does not work.
    Any help would be greatly appreciated.
    Thanks
    TK

    Hello!
    Thank you for checking my pages. I did clear the cache. Updated software. Repaired permissions. Rebooted (a million times). I also made sure I had no overlapping graphics. The problem appears to be on the pages linked from This Week (in the navigation bar), the pages are Probability and Measures of Central Tendency. The links are in Text Boxes with frames on them.
    I tried viewing the pages using Safari on my iBook, on an iMac using Safari and on a PC using Firefox. I get the same links not working. It's just odd that they appear to function "normally" in iWeb. I was hoping I did something dumb that I could fix quickly. If not, I'm having to do the pages over.
    Your suggestions are greatly appreciated.

  • FLV files plays in preview, but not showing up on my LMS

    I have imported a single .flv file into Captivate 4, which was created in Flash 8. It shows in preview mode, as well as when I preview in IE browser, but when I launch from my LMS, I get nothing on the page. I can embed an .swf  video file that was published out in Flash 8, and when I embed that into Captivate 4, it plays fine in preview mode and in my LMS. I have tried using different settings in Flash to render out the same video and nothing has worked. Any thoughts?

    Jp,
    Thanks for the info. I did check with Tech Support from the LMS, and they assured me that the LMS does support .flv files. However, our online modules are launched from a webserver separate from the LMS, and that server needed to have the proper MIME type configured. By default, Windows 2003 Server does not have an associated MIME type to support deploying FLVs.
    Specifically, it needed to be set up to recognize .flv files with the correct file association and content type specified. That took care of it.
    Thanks,
    Steve Sieberts
    Instructional Designer
    Education and Workforce Development Branch
    Kentucky Department for Public Health
    275 E. Main St.
    Frankfort, KY 40621
    Phone: 502-564-4990 x3789
    Fax:     502-564-2626
    [email protected]
    "The price of success is hard work, dedication to the job at hand, and the determination that whether we win or lose, we
    have applied the best of ourselves to the task at hand."
    - Vince Lombardi
    NOTICE OF CONFIDENTIALITY:  This e-mail, including any attachments, is intended only for the use of the individual or entity to which it is addressed and may contain confidential information that is legally privileged and exempt from disclosure under applicable law.  If the reader of this message is not the intended recipient, you are notified that any review, use, disclosure, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please contact the sender by reply e-mail and destroy all copies of the original message.

  • Flash videos play in preview, but not live website...

    I have embedded .FLV video files into my website.  The videos play in my preview browser with no problems.  When I upload them to my live site, and try to view them on the web, there is just a white space where they are supposed to be, and they do not play.  The url of the webpage with the video is :
    http://www.centrometalcut.com/Photos/abrasivephotos.asp
    I have searched for all kinds of answers and solutions, tried tons of different things, and I cannot seem to fix this. I am so frustrated, please help!!   Thanks.

    Hi,
    may I show you how I did it? (Translated from my German DW):
    Header 1
    Header 2
    Ganz neues Unterverzeichnis anlegen
    Datei html neu
    DesignMode:
    Einfügen Flash-Video
    Durchsuchen ---> myFLV.flv
    Skin: Halo Skin 3 (min. Breite 280)
    Breite 640
    Höhe 480
    alle Kästchen angeklickt
    create a really new subdirectory
    create a new html-file
    DesignMode: Insert Flash-Video
    search/browse ---> myFLV.flv
    skin: Halo Skin 3 (min. width 280) ( it's only my choice)
    width 640 ( it's only my choice)
    height 480 ( it's only my choice)
    I clicked all the boxes
    ---> And now up and away with ALL these files in a directory of your server:
    YourFlv.flv
    YourFlv.php (or YourFlv.html or ......
    Clear_Skin_1.swf (my choice, but created from DW)
    FLVPlayer_Progressive.swf (created from DW)
    Hans-G.

  • Applet loads/plays in preview, but not on live web host server

    When I use FireFox 3 to browse to the “flexdc08.htm” document (yes, javascript is turned on) I get this message in the browser status bar – “Applet llp3 started”.
    But, only a blank page is ever displayed, nothing ever gets loaded, the application never starts.
    Specifically, I am questioning this line of code in the “flexdc08.htm” file –
    <APPLET CODE="llp3.class" ARCHIVE="llp3.jar,skinw.jar" width=664 height=453 MAYSCRIPT>
    The files “llp3.class” and “skinw.jar” do not exist. “llp3.jar” does exist.
    Here is a complete listing of the code in “flexdc08.htm” –
    <HTML><HEAD><TITLE></TITLE></HEAD>
    <BODY BGCOLOR='#FFFFFF' leftmargin=0 topmargin=0 rightmargin=0>
    <DIV ID='TDemoID' STYLE='position:absolute; left:10; top:10; visibility:visible'>
    <APPLET CODE="llp3.class" ARCHIVE="llp3.jar,skinw.jar" width=664 height=453 MAYSCRIPT>
    <PARAM NAME="ProjectFile" VALUE="flexdc08.ctd" />
    <PARAM NAME="LB" VALUE="0xFFFFFF" />
    <PARAM NAME="TC" VALUE="0x000000" />
    <PARAM NAME="SynchLoad" VALUE="1" />
    <PARAM NAME="FromSkin" VALUE="1" />
    <PARAM NAME="LoadingMsg" VALUE="Loading Demo..." />
    <PARAM NAME="ExpiredMsg" VALUE="Time limit expired." />
    <PARAM NAME="CorruptedMsg" VALUE="Demo File is corrupted." />
    <PARAM NAME="LoopMsg" VALUE="Loop" />
    <PARAM NAME="ProjectName" VALUE="Project Name" />
    <PARAM NAME="ProjectVer" VALUE="Project Version" />
    <PARAM NAME="Author" VALUE="Author" />
    <PARAM NAME="AURL" VALUE="Author's URL" />
    <PARAM NAME="AEMail" VALUE="Author's E-Mail" />
    <PARAM NAME="StopMsg" VALUE="STOP! The HTML page has been modified." />
    <PARAM NAME="IsLoop" VALUE="0" />
    </APPLET>
    </DIV>
    </BODY></HTML>
    And, here is a complete listing of all of the files on the web host server –
    autorun.inf
    autostart.exe
    autostart.ini
    flexdc08.ctd
    flexdc08.htm
    flexdc08_1.au
    flexdc08_10.au
    flexdc08_11.au
    flexdc08_12.au
    flexdc08_13.au
    flexdc08_14.au
    flexdc08_15.au
    flexdc08_16.au
    flexdc08_17.au
    flexdc08_18.au
    flexdc08_19.au
    flexdc08_2.au
    flexdc08_3.au
    flexdc08_4.au
    flexdc08_5.au
    flexdc08_6.au
    flexdc08_7.au
    flexdc08_8.au
    flexdc08_9.au
    llp3.jar
    playbutton.gif
    The applet starts and plays fine when previewing from within Dreamweaver. It's just when it is published o the web host server and tried to access from there in a browser that it will not start.
    Is there a good way to debug the applet startup?
    These files were provided to us from a vendor on a CD, which plays when inserted into the PC drive.
    Thanks,
    Mark

    Are you sure you are uploading the pages to the correct location?
    Could you post a screen capture of your expanded files window, showing the remote server and local file structures?
    I'm guessing they're not identical and that you may be uploading to a redundant root folder.

  • Plays in preview but not when posted on internet CS4

    Hello,
    I created a quiz that has several small video in AS2.  It works fine when I preview it, but when I post in on the internet it plays the first video and goes to a black screen.  I created the page and clicked to publish it.  I then exported the swf by hitting file/export/export movie then saved this and posted it to the internet.  This is how I have done it in the past, but now I get a blank screen.  Any help would be appreciated.
    Mark.

    At least on my side it only plays the first video and does not progress.  There are twenty-five videos after this, they are all very short  but they progress.   Is this progressing for you?  Perhaps it is my computer if so. Please let me know.
    Thanks again,
    Mark.

  • Movie plays in preview but not playing in chm

    I've tried several different methods of adding flash video
    files to a HTML Help project.
    I've added the files to the Baggage Files and the Multimedia
    folder (at least I think they're in the Multimedia folder!!).
    When I preview the help page in RH, the movie plays as
    expected. But, after compiling the help, the page looks blank and
    the movie does not play.
    Any suggestions?

    Unfortunately because it's a conversion problem from copy protected discs we are unable to discuss the matter under the Terms of Use for these communities.

  • .swf displaying in preview, but not on actual web page

    As above really. I don't really use Flash, but was just trying to put up a little video demo online.
    Just dragged the video onto the canvas, published it as an .swf, but when I upload it all and visit the web page, the video clip / swf isn't displaying.
    Its fine in the preview though.
    The page is here :
    http://www.hpwebdesign.co.uk/demo.html
    Any ideas what I'm doing wrong?
    Thanks.

    OK - I didn't think you needed to upload the original video clip.
    Anyway - I've recreated my steps.
    1. Opened Flash.
    2. Created a new ActionScript 3 page
    3. File > Import > Video with Load external video with playback component
    4. Save file
    5. Publish SWF
    6. Switch to DW and Insert > Media > SWF
    Before switching to DW, it all looks OK in the preview.
    How do I get Flash to create the HTML page? I had a quick look through the menus, but didn't see anything....

  • Flash work in preview but not in the browser!?

    Hi there:)
    I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
    Thanks!
    V

    Hi John!
    Yes, sorry about that.. here it is.
    http://farmingtonfarm.com/appraisal.html
    Thanks for your help!!
    v
    Date: Thu, 8 Apr 2010 18:52:05 -0600
    From: [email protected]
    To: [email protected]
    Subject: flash work in preview but not in the browser!?
    Can't really help without a link to the site. Can you provide one?
    >

  • Button hyperlinks work in project preview but not in published .swf

    Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
    Any ideas?
    Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
    Using Captivate 6 on WIndows 7

    Hello,
    Welcome to Adobe Forums.
    Once your project published, add the .swf file in Flash Global Setting :
    1) Right Click on the content (Published .swf file) and click on Global Settings
    2) Go to Advanced Tab and Click on Trusted Location Settings  (Scrool down to see this button)
    3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
    4) Launch the .htm file again (Location where Captivate publish your project)
    Hope this helps !!
    Thanks,
    Vikram

Maybe you are looking for

  • ITunes Won't Open -- Uninstalled and Reinstalled

    I am unable to open iTunes on my pc. I tried uninstalling QuickTime and reinstalling and it did not work. Then I uninstalled iTunes and reinstalled, and still it will not open. Whether I try through the icon or through the programs menu, it just will

  • How to add a border to image

    I am a newby to Photoshop.  All I want to do is add a border to my image.  Can't find a tutorial. Help?

  • Data Transfer from Flat file To SAP system,

    Hi SAP Guru's, My query is : How to update Material master data by using idoc type MATMAS05 . The data is present in flat file at application server. I am  new to idoc area.Please provide me the sample program that how to update material master data

  • Vector help

    hi im making a level editor for my breakout game now and I use a vector to store the game objects.. However when painting I want to go through the vector and call each objects draw method..but that doesnt work. Im just used to use arrays but they can

  • Question regarding Digital Out (COAX) not mini plug on Audigy ZS

    Hi. I have a question regarding the Digital Out and Digital In (COAX/RCA) Inputs I have on the back of my computer and if theres an easy way to hook the digital out with only a regular Digital Coax cable to a Home Theater receiver and get 5./DTS, OR