Swing : login with error checking
Hi all,
I am trying to write a login with error checking on the password. If password validation fail. It will remain there. If it passes it will go to the application. any samples and sites please.
thanks
andrew
CardLayout would be good for this sort of thing - allows you to lay panels on top of one another and then switch the display accordingly.
Thus, when your app starts up you show the login screen and then once a user successfully logs on you switch to the main application screen.
I put a basic example on another thread earlier:
http://forum.java.sun.com/thread.jsp?thread=341205&forum=421&message=1404092
Similar Messages
-
Exchange 2013 : OWA failing after login with error "HTTPS 400"
Greetings,
I am in phase of Upgrading my existing Exchange 2007 Infra to Exchange 2013.
The environment is as mentioned below:
4 Mailbox Server (DAG)
4 CAS Servers (NLB)
Everything has been configured and working properly, except Only one CAS server is able to pass the login request
https://servername/owa
Rest of all the CAS servers are failing with error "HTTPS 400" while accessing OWA
https://localhost/owa
Its happening only while accessing OWA, ECP works fine.
Please let me know the fix to counter this strange issue.
Thanks in advance.
RegardsHi,
Please check if IIS log is enabled on the CAS server, if not, please enable it.
Then check the detailed error code from IIS logs (Path: inetpub\logs\Logfiles\W3SVC1 ) , some code like 400.1, 400.2 ect.
Refer to this KB for more details
http://support.microsoft.com/kb/943891
After that, please post the OWA related login entry with error code shows 400.
Thanks for your time and patience.
Meanwhile, please check the OWA authentication method by command
Get-OWAVirtualDirectory –Server “Ex2013 CAS server” | fl *authentication*
We should set the authentication as the below:
Get-OWAvirtualdirectory -Server “Ex2013_CAS_server” | set-OWAvirtualdirectory -windowsAuthentication $False -BasicAuthentication $True -FormsAuthentication $True
Then perform iisreset and try to access OWA again.
Best Regards. -
Essbase Login with Error 1042006 Network Error[111]
Hi Guys,
It is not new installation and worked well before.But recently can't login and retirive error emsg "1042006 - Network error [111"
Basic infor
=========
Essbase Release:11.1.2.0
System Platform: Linux-86
=========
Used the essmsh login. it retrived below error message
=========
ERROR - 111 - Unable to connect to localhost.
ERROR - 1042006 - Network error [111]: Unable to connect to [localhost:1423]. The client timed out waiting to connect to Essbase Agent using TCP/IP. Check your network connections. Also make sure that server and port values are correct.
============
tried to restart essbase agent with opmnctl. it also occured error to start this component.
checked ohs_component and got below error messages.
=============
pid file /Oracle/Middleware/user_projects/epmsystem1/httpConfig/ohs/diagnostics/logs/OHS/ohs_component/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
=============
stop all EPM and restart it but it doesn't work and with above error " Unclean shutdown of previous Apache run"
Confused about this prb. Can anybody here give me some advice about this issue?
Thanks.
Regards,
Chelsea1. Open the Windows Registry.
2. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.
3. Add new DWORD Value named "TcpTimedWaitDelay"
- right click and select Modify
- Select "decimal" radio button, type in 30.
4. Add new DWORD Value named MaxUserPort
- right click and select Modify
- Select "decimal" radio button, type in 65534
5. A reboot of the server is necessary.
hi Steave :)
out of curiosity how skype will effect?.. -
Hello all,
As per my sample VI.
I gave Empty array to For Loop. As we know this Loop will not execute because N value “0”.
But, I want to know why Error out always giving True value. This Error Indicator value changing to “True” irrespective of Error In.
BR,
Munna
Munna
Solved!
Go to Solution.That''s exaclty what I said.
If you use plain tunnels and the loop iterates zero times, the output will give the default value for the datatype, which is FALSE for errors.
If you use shift registers, whatever is wired to the initializer terminal will be output unchanged on the right if the loop iterates zero times. Since you initialize with a error=TRUE, that's what you get.
This is all as expected. In your first post you claimed that the output is error=true using plain tunnels, which cannot be. Agreed?
If you want error=false with the shift register, change the diagram constant accordingly.
LabVIEW Champion . Do more with less code and in less time . -
Multithrea​ding with error check
hi
how to use orror in and orror out in multithreading procedure?
for single threading procedure ,we can use error in and error out to controll error
for multithreading procedure, we can use one error in but have many error out ,I only want to use one error out.
thanks your helps .
sonic
Sonic
Diffrent Strokes for Different FolksHi sonic,
there's a 'Merge Errors' function. Up to LV7.1 it can be found in the time&dialog palette.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Difference between the way of login with ip address and SAProuter when checkin original file
Hi, experts
We found out:
① Login with ip address, check in a file with file name less than 22 Chinese character, OK.
② Login with ip address, check in a file with file name more than 22 Chinese character, error message 26253 appeares: Error while checking in and storing: &
③ Login with SAProuter, check in a file with file name more than 22 Chinese character, OK.
What casues error in condition ②? The only difference between ② and ③ is the way of logining to SAP system.
Best Regards
YemiHi Yemi,
based on your description I would kindly ask you to check the application log transaction SLG1 after getting the error message with your userID. Here normally further background information is listed that might help to get a hint what is going wrong.
Best regards,
Christoph -
Error Checking in iTunes - do I set it to ON of OFF and WHY?
So I have a disk that looks good but iTunes fails to RIP a couple of tracks in their entirety (i.e. - it only copies a portion of the track ) and this is when the _Error Checking_ option is "checked".
If I de-select the Error Checking option and retry the import, the track is imported completely
So my questions are:
1. if Error Checking is selected and the RIP is unsuccessful is this reported anywhere?
- it would be nice after ripping 18 tracks to be informed that 1 or 2 were not completed
- I could not find any errors reported - it simply skipped to the next track
- I only found it on listening to the track, which terminated abruptly
- I re-ripped the faulty tracks and noticed the Rip terminated prematurely from the status bar
2. if Error Checking is de-selected
- I assume the Ripping process simply copies what data it is able to read?
- if that is the case - I assume burning a CD will propagate the problem?
Is anyone able to provide some clear and concise information on the Ripping process WRT Error Checking - no conjecture or assumptions please, the web is full of that.
Many Thanks in advanceThanks Limnos for confirming the propagation issue - I didn't know if apple did stuff behind the scenes.
If anyone else knows if iTunes has errors flagged or reports located somewhere I would love to know where.
For know I'll accept that turning on error checking will cause the Rip to fail and not use it.
One other thing I noticed was with Error Checking turned on the quality of some tracks were pretty poor, but once turned off the quality got better - this appears contrary to some other posts I have read.
Any feedback on the quality issue would be appreciated -
ID login comes up with error message
I have changed my I'd login password three times and have logged in but after authinticating it comes up with error! I have compared my blackberry to friends of mine and it looks like my phone didn't download the app world properly when I registered! I am unable to deregister because there's no link! What do I do now? Blackberry has no customer service contact number to check my phone.my service provider can't help they say blackberry is working on it!
"itunes has stopped working microft is checking for a solution"
Fingers crossed, your Vista problem history may give us more information on what is going on.
Go into your Problem Reports and Solutions Control Panel, click on the Problem History, and look for iTunes problem reports that occur at the same time as those error messages. Open the problem reports. Do they all say the same thing? If so, paste the contents of a typical problem report into a reply here. -
Background job failing with license check error
Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = hostname
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = host
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login. -
SSPI handshake failed with error code 0x8009030c and Login failed for user''
I got the following error when tried to connect to local machine in the
non-domain environment with Windows Authentication by SSMS.
"SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
"Login failed for user''. the user is nothing associated with a trusted SQL server connection."
questions
1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
2,Any ideas for this issue?
Please click the Mark as Answer button if a post solves your problem!Hi Michael,
Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
FAQ.
Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
1.Click Start, click Run, type regedit, and then click OK.
2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3.Right-click Lsa, point to New, and then click DWORD Value.
4.Type DisableLoopbackCheck, and then press ENTER.
5.Right-click DisableLoopbackCheck, and then click Modify.
6.In the Value data box, type 1, and then click OK.
7.Exit Registry Editor.
8.Restart the computer.
There is a similar blog about your scenario for your reference.
http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
After running adstrtal.sh with error code 0, unable to login
Dear All
I have successfully installed 11i on SLES 9. After installation, i was able to run the script adstrtal.sh successfully as root with error code 0. I get the home page with out any problem. When i tried to logon to the application, i get the following error message on the browser, when i click on the log on link on the application home page.
error message:
Internal Server Error(500)
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Any guidance on this problem would be very helpful.
thanks in advance
Shan
email: [email protected]I am getting same problem....I am unable to solve it out..I have tried all posibilites...
My Apps Version 11.5.10.2(10.2.0.2 Database) on SuSe 9.0 server. I have applied ATG_RUP4 and Latest HRMS Family packes in this instance before 5 months.....all are successfull....Till Last Night..no problem...I am getting this problem from today morning...
GUEST user password is correct in dbc file and in profile option...
All services are up and running...
Today morning I got this error..when all the users login into apps...Home page is succesfully loaded...when we try to login into login page...it is throwing this error...
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
till last night...This is working...from today morning it is giving problem.
we are able to login via
http://appsever.xyz.com:8000/dev60cgi/f60cgi
but
we are getting this problem when login via
this
http://appserver.xyz.com:8000
what may be the problem??????
Errors in mod_jserv.log
[03/05/2007 10:37:21:684] (ERROR) ajp12: Servlet Error: oracle.apps.fnd.cache.CacheException: null
[03/05/2007 10:37:21:684] (ERROR) an error returned handling request via protocol "ajpv12"
[03/05/2007 10:37:21:684] (ERROR) balance: 13830 internal servlet error in server appserver.xyz.com:16010
[03/05/2007 10:37:21:684] (ERROR) an error returned handling request via protocol "balance"
Errors in mod_jserv.log
[03/05/2007 11:15:46:935] (EMERGENCY) ajp12: auth did not receive challenge size
[03/05/2007 11:15:46:935] (EMERGENCY) ajp12: function auth fail
error in $access_log.<Number>
appserver.xyz.com - - [03/May/2007:11:15:50 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:15:58 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:05 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:12 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:19 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:26 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:34 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:41 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:48 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010 HTTP/1.1" 200 15
appserver.xyz.com - - [03/May/2007:11:16:55 -0700] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19010
HTTP/1.1" 200 15
error in the error_log
[Thu May 3 11:19:39 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5671, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:19:46 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5710, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:19:54 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5749, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:20:01 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5784, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:20:08 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5823, group:XmlSvcsGrp) died, restarting.
[Thu May 3 11:20:15 2007] [warn] OPM: EW: Process appserver.xyz.com:19010 (pid:5862, group:XmlSvcsGrp) died, restarting.
error in the error_log_pls
[Thu May 3 09:07:13 2007] [notice] FastCGI: process manager initialized (pid 5399)
[Thu May 3 09:07:14 2007] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Thu May 3 09:43:57 2007] [notice] caught SIGTERM, shutting down
[Thu May 3 09:55:33 2007] [notice] FastCGI: process manager initialized (pid 5002)
[Thu May 3 09:55:34 2007] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Thu May 3 10:06:03 2007] [notice] caught SIGTERM, shutting down
[Thu May 3 10:08:43 2007] [notice] FastCGI: process manager initialized (pid 13851)
[Thu May 3 10:08:44 2007] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
(1) I have run the autoconfig in all tiers
(2) I have compiled all invalid objects.
(3) I have checked the guest user password in all places..it is correct
(4) I am able to login via dev60cgi/f60cgi screen..
(5) I have checked the Application Database ID profile optin it is corect..
(6) I have checked the DBC file..it is having right values in that file..
(7) I have cleared the cache (OA_HTML/_pages)
(8) Recheced the issue...still getting same problem
Still I am unable to solve out this issue...
Please suggest to solve this...
Message was edited by:
bsubbu
Message was edited by:
bsubbu -
While send/receive email, I have received an error message "Sending of password d"?
However with same login details, I am able to login with other application.
I have changed password still the issue remains as it is.https://support.mozilla.org/en-US/kb/cannot-send-messages
-
AppContainers_test fails with error during pre-test configuration checks
Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem -
I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?
Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.) -
Check DB is finished with error
Hi Guys, I need your help in solving the following issue.
Here are the logs...I schedule it from db13.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000009, user ID DDIC)
No application server found on database host - rsh/gateway will be used
Execute logical command BRCONNECT On host cscappnoi023
Execute logical command BRCONNECT On host cscappnoi023
Parameters: -u / -jid CHECK20070918154051 -c -f check
BR0801I BRCONNECT 7.00 (27)
BR0252W Function fopen() failed for '/oracle/IRP/102_64/dbs/initIRP.ora' at location BrInitOraCopy-2
BR0253W errno 13: Permission denied
BR1301W Error message from likeywlib: likey_init:Couldn't open verify PSE file ("/oracle/IRP/LASVerify.pse") for writing, errno
BR1302W Initialization of license key library likeywlib failed, return code 1
BR1304W Checking SAP license failed at location BrLicCheck-104
BR0602W No valid SAP license found - please contact SAP
BR0805I Start of BRCONNECT processing: cdwekkbc.chk 2007-09-18 15.40.52
BR0252E Function fopen() failed for '/oracle/IRP/sapcheck/cdwekkbc.chk' at location main-11
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/IRP/sapcheck/cdwekkbc.chk failed
BR0806I End of BRCONNECT processing: cdwekkbc.chk2007-09-18 15.40.56
BR0280I BRCONNECT time stamp: 2007-09-18 15.40.57
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Enviroment is ECC 6.0 with Oracle and AIX 5.3
Thanks in advance
BaniHi Bani
Edit: sorry i was mistaken, i guess the guys below are right, just ignore my post, sorry
<b>BR0602W No valid SAP license found - please contact SAP</b>
Please check if you have a valid license installed. Use transaction SLICENSE or command
saplicense -show
Regards
Michael
Message was edited by:
mho
Maybe you are looking for
-
I want to use numbers on my iPad mini for a team I coach. I have a spreadsheet on my mac I want to import onto the iPad mini for players to enter in wellness ratings. On this spreadsheet (on the mac) I have a conditioning formatting rule that when a
-
Is RTMT can monitor when the first Route Group of a Route List is not used ?
Hi everyone, I want to find how monitor this event in RTMT without success. I hope someone will have an idea to suggest ! My problem : I have one Route List (RL_Remote) wich is used to route calls between two sites. This Route List has two Route Grou
-
Interactive presentation with hyperlinks on iPad (Keynote,ppt)
Hey there, since 4 month I am trying to find a solution to this problem (See title). How is it possible that Apple can´t bring out an update for that? This is in my opinion one of the most important functions especially for companies who are presenti
-
Watch failing to notify me to stand up, doesn't track when I stand up
Got my watch yesterday, and aside from three times total in the past 24+ hours of having it and wearing it, it doesn't alert me to stand up once per hour. The watch also doesn't seem to track when I stand up of my own accord, be it to just stand up f
-
Hi, I have a problem with DW. I´d like to develop a site using PHP and SQL Server. Anyone knows if is there a extension to do this kind connection inside DW? I´ve tried to use the string that DW generates to connect with MySql and change it to connec