Is RTMT can monitor when the first Route Group of a Route List is not used ?

Hi everyone,
I want to find how monitor this event in RTMT without success. I hope someone will have an idea to suggest !
My problem :
I have one Route List (RL_Remote) wich is used to route calls between two sites. This Route List has two Route Group :
- the first is a SIP trunk connected to my remote site (RG_SIP)
- the second is a local route group wich used PSTN (RG_PSTN) [BACKUP]
Is it possible that RTMT sends me an alarm when calls are routing via RL_Remote but are not using RG_SIP ?
In fact, I want to receive an alarm as soon as the Backup Route Group (RG_PSTN in my example) is used.
Thanks for your help !
Have a nice day,
Franck-Emanuel

More or less correct yes:
Core Issue
This issue can occur if an available route is not found in the indicated route list.
If the call fails on the current gateway, Cisco CallManager attempts to extend the call to the next route in the route list. This occurs until it reaches the last route. If the call cannot be completed with the last gateway, the Route List Exhausted event is logged.
These are possible reasons for a failure on the current gateway:
Unallocated number, such as a non-existing destination
Busy user
Out of bandwidth
Gateway fails to respond to the call setup request
The user receives alerts similar to this in the Real-Time Monitoring Tool (RTMT):
Most Recent Alert Raised: At 09:19:27 on 12/21/2005 on cluster CALLMANAGER1-Cluster. Number of RouteListExhausted events exceed 0 within 60 minutes.
There are at least five RouteListExhausted events (up to 30) received during the monitoring interval from 09:07:27, 12/21/2005 to 10:07:27, 12/21/2005.
https://supportforums.cisco.com/docs/DOC-29032

Similar Messages

I can only print first 80 or so pages after I download firefox - if I do a system restore and uninstall firefox, the problem goes away... until I download firefox again and then I again can only print the first 80 or so pages - even if I am using IE!

This began when business increased in January and our print jobs got big (printing invoices off the internet). It can print any small job no problem but if it's over 80 or so pages, it will stop and show a spooling error. I have done system restores and uninstalled firefox and then Internet Explorer will print the big jobs UNTIL I REINSTALL FIREFOX. Then the problem resurfaces whether using firefox or IE!!! Why?! I don't care why - how do I fix it? All 13 other computers use firefox and that is how my staff is trained. I hate IE.

-> '''Is my Firefox problem a result of MALWARE ??'''
* Popups Not Blocked - http://kb.mozillazine.org/Popups_not_blocked
-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free Internet Security - http://www.lavasoft.com/products/ad_aware_free.php
Check and tell if its working.

Can we control the output screen area of alv grid list

Hi All,
can we control the screen area of grid control in alv's , not using ooalv's. By default grid list is displaying in the whole screen, but i want to display this grid list in specific area in output screen , not in full screen, how to set these screen area for this grid control. Please let me know.

Hi,
If you use the following parameters
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
you will get the output in the size expected but it will be in the form of a pop up box and a blank screen at the back and user action like cancel etc will take you back to the selection screen.

An image comes on my screen, but I can only see the first page. When I try to print, I get a blue question mark and can't print.

Recently when I pull up a multi-page document from an internet site, I can only see the first page. I can't scroll through it. When I try to print, I get a big blue questionmark. What's the solution to this, please?

Thank you so much!! So simple, yet so effective! Am happy!

My iTunes Match automatically charged me for a second year when the first year finished. In spite of that, I have lost all of my playlists on my iPhone. How can I get them back?

My iTunes Match automatically charged me for a second year when the first year finished. In spite of that, I have lost all of my playlists on my iPhone. How can I get them back?

Hi,
No need to post three times!
Is iTunes Match still turned on on your iPhone? If not, you need to turn it back on.
If it is still on, go to settings, music app and turn off match- sign out of iTunes Store. Reboot iPhone, sign back into iTunes and turn on match. Poem music app. Does this help?
jim

Creating PDFs using Adobe Acrobat 9 Pro and can only see the first 10 pages in PDF even when the page numbers on bottom state 10 of 13 (or any number greater than 10).

PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.

Hi stephaniec0103,
Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
Have you tried repairing Acrobat from the Help menu?
Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
You may download a 30-day free trial version of Acrobat from the below mentioned link:
Download Adobe Acrobat free trial | Acrobat XI Professional
Let me know how it goes.
Regards,
Anubha

How can I stop when the first character I type into start page search matches my thunderbird password the whole password is revealed.

Typing into the Mozilla start page my thunderbird/gmail password is revealed as a suggestion pop-up when the first character is typed.

See:
* http://kb.mozillazine.org/Deleting_autocomplete_entries

My ipod went to the ''connect to itunes mode'' and i want to use my itunes backup but how can i do that. also when the ''recover your ipod screen'' appeared i accidentally chose not to show it anymore.

My ipod went to the ''connect to itunes mode'' and i want to use my itunes backup but how can i do that. also when the ''recover your ipod screen'' appeared i accidentally chose not to show it anymore. please help i just had it for half a day.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

When starting a Lync group message from a Mac, anyone else using a Mac cannot see the first message.

When a group conversation is started from a Mac, any other Mac user will not see the first message unless they reply to the message immediately. Here's what I've tested:
Mac User 1 starts a group conversation with 4 people invited.
Mac User 2 sees the popup but does not immediately open the conversation window.
PC User 1 opens the conversation window and sends a reply.
PC User 2 opens the conversation window and sees all the text.
Mac User 2 finally opens the window about 30 seconds later and can see all text except the first message.
Why does the first message disappear for Mac User 2?
Note: This does not happen if the original message was started from a PC, in that case Mac User 2 would be able to see the first message.
Thank you for any help.

Hi,
Did the issue happen only for single Mac computer or for multiple computers?
Please try to login Lync client on another Mac computer with the same Lync account and test again.
Please also try to login Lync client on the issued Mac computer with other Lync account and test again.
Please check if the Lync client on Mac computer update to the latest version, if not, please update to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How can i show the first item in the list as selected item

Aslam o Alikum (Hi)
Dear All
How can i show the first item in the list as selected item when user click on the list. Right now when user click the list the list shows the last item in the list as selected or highlighted. Furthermore if the list item have large no of value and a scroll bar along with it then the list scroll to last item when user click it with mouse. I want that when user click the list item with mouse list should show the first item as highlighted.
Take Care
Allah Hafiz

Hi!
You can set list "initial value" using When-Create-Record trigger.
I.g.
:<Block_name>.<list_item_name> := Get_List_Element_Value('<Block_name>.<list_item_name>', 1);

How can I have the first letter after a sentence ending period automatically capitalize? Can't seem to figure it out...thanks!

How can I have the first letter after a sentence ending period automatically capitalize? Can't seem to figure it out...thanks!

You need to fix capitalization in Pages Preferences > Auto-Correction. When you select this option, you can just keep typing in lower case and the first letter of the next sentence will automatically promote to upper case.

Triggering a job when the first job gets cancelled...

From BMV0, we can trigger a job once the first job is completed using the 'After Job' option. Can u tell me if its also possible to start another job when the first job gets cancelled ?
Message was edited by: Sushma Anuprava
Message was edited by: Sushma Anuprava

Hi,
Go to the database view V_OP and check for the column 'STATUS' which gives the background job status , based on value from this column (cancelled status ) , start the new job with FM : 'JOB_START' .
Regards
Appana

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right.

Time Machine - using multiple drives when the first is not available

Hello I have been succussfully using Time Machine with my USB external drive. I have been connecting it to my MacBook Air from time to time. Manual backups as well as the hourly backups when the drive has been connected worked without any problem.
Recently, I connected Synology DiskStation (NAS) to my network and I have added it to the list of drives in my Time Machine setup. When my original external drive (first in the list) is not connected to my MacBook the hourly backup is not initiated by the Time Machine at all. Manually started backup is runnign fine without any problem.
The external drive is annotated with exclamation mark in Time Machines list with "not available" error - and it seems that this is causing the interruption of automatic hourly backup to any drive.
Is there any way how to debug Time Machine? Or to get some logs of Time Machine?
Any similar experience with multiple drive backup when the first of them is disconnected most of the time...?
Thanks a lot for any help
Petr

Perhaps you should address this to Synology's tech support. Apple doesn't provide any support for third-party NAS, so your best bet is with Synology.

Is RTMT can monitor when the first Route Group of a Route List is not used ?

Similar Messages

Maybe you are looking for