Switching between multiple tabs?

I am currently running Safari 3.2.1, haven't updated to 4 yet...Does anyone know a keyboard shortcut to switch between multiple tabs? Like you can "command+tab" to switch between multiple applications...If I have 2,3,4, etc tabs open in a single window, is there a command to switch between those multiple tabs without using my mouse???

Simpatico wrote:
it´s such a pity that Safari cannot abide by industry practice (IE, Chrome, Firefox) some command key + no of tab, instead of associating that to bookmarks.
What happens after 9 tabs? I regularly have 15+ open.

Similar Messages

Fastest way you switch between multiple images (CS3) ?

I'm originally a Fireworks user (from 2001) and am starting to learn Photoshop as it is in my CS3 set and it's superiority in image editing.
BUT, I was suprised/shocked/P.O.-ed to notice Photoshop doesn't have tabs to easily switch between images like Fireworks has had for the last 7 years.
(Yes, I realize CS4 has that option now, but I'm not willing to dole out another $600 bucks for another upgrade )
Anyway, enough ********.
My question is:
"Can you tell me how you switch between multiple images opened in Photoshop CS3?"
I'm assuming there must be a keyboard shortcut I can't find, or something besides having to shrink down the images and routing through them . . .
Thank you for your time and help,
Brad

Hi again My,
Thanks for the reply on my other post as well.
Ctrl+Tab
Got it. Thank you.
Quick and easy enough. I'm happy :-)
Brad

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

Switching between multiple input languages.

I use English, Korean and Google Japanese. I used to use Windows with the same set of languages and it was even more difficult than in OS X, because each IME may have multiple languages (for example, Korean IME has both Korean and English mode). Now in OS X it is better than Windows because each IME has only single language, but still there are some troubles.
I use long command + shift. It shows the list in the middle of the screen, but the order is change depending on the current IME. And it only has text, no flag icon, so it is difficult to get the IME I want without carefully watching the screen.
It looks like OS X does not support assinging a shortcut for each langauge. For example, if I could assign F1 for English, F2 for Korean and F3 for Japanese it would be much easier. Or if only the popup language screen had flag icons...
Is there any third-party app that helps switching between multiple IMEs?

If you stop holding down the keys so long, the list should not appear. Instead, use the flag icons at the top right of the screen to tell which keyboard is active. If you don't see those icons, go to system prefs/language & text/input sources and check the box for Show Input Menu in Menu Bar.
I don't know of any way to use keyboard shortcuts in general for this, but the app Nisus Writer has preference settings that let you set that up for that app.

What idiots created the "Switch between apps" tab?

Really?
Microsoft, you've created a major screw up and offer no solution for this. I purchased a new laptop, (has a touchscreen), and I can not get rid of the "Switch between apps" tab without restarting the computer.
Swiping it does nothing, it stays. Clicking the top left corner or touching there does nothing. It just sits there determined to be a pain and take up part of the screen.
What idiot designed this function. Have they been fired? Why does Microsoft refuse to respond with a fix or answer to all of the people asking to resolve this?
Really ticked off customer.

Hi Ticked at Microsoft over the Switch between apps,
Sorry for this annoying phenomenon, it should not be like this in most situation.
I want to provide my help to help you get rid of this issue, instead of restarting your computer.
Open Local Group Policy Editor, you can press Win+R to get the prompt, type
gpedit.msc and press Enter.
In the left pane, click/tap on to expand User Configuration, Administrative Templates, Windows Components, and Edge UI
In the right pane of Edge UI, double click/tap on Disable help tips to edit it:
Set the configuration to Enabled.
Select Apply and exit Local Group Policy Editor.
Alex Zhao
TechNet Community Support

Why is switching over multiple tabs in Firefox so slow? how solve this problem please

My problem is just the slow switching over multiple tabs in Firefox. Each time I go to another tab it takes a while (sluggish), or you can say the ‘click’ on the tab takes time to happen. The rest Firefox is working perfect in speed.
Don’t know how to solve it, followed all the steps on the MakeUseOf Firefox Speed Up Guide, still having same problem.
please help me

Hi tahas,
Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-slow-or-takes-too-long-start performance troubleshooting section]? There is a lot of good information in there that should help.
Hopefully this helps!

Why does my screen blank and need to be refreshed when I switch between multiple open tabs and is there a fix to this?

If I have one tab open at a site, and then open a new tab to a different website, when I click back on my other tab the screen is a blank gray color and I have to refresh it to get the site back. This happens almost every time I switch between my open tabs, no matter which tab I am going back to. I am not having this problem in any other browsers. This has only started happening in the last couple of months and it has gotten really annoying. Does anyone know how I can stop this?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How can I switch between multiple windows of the same application (e.g. Safari) over several desktops ?

Hi All,
I have one application, for example safari, open and running with multiple windows (with or without tabs) spread over several desktops.
How can I switch between the windows only via keyboard? CMD+> and CMD+< let me only swicht between windows open on the one desktop I am currently looking at.
thanks for your replies,
equi

Barney,
many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
Unfortunately, moving the focus to the next window only works with windows on the same desktop.
btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
Thanks,
equi

Switching between multiple desktops while using VNC

Hi All,
Encountering a minor inconvenience with switching between desktops while VNC-ing. I frequently telecommute and VNC into my work imac, which has parallels + windows 7 installed. My personal machine is a retina macbook pro, and both my macbook and the imac have the newest mavericks installed. I will frequently have multiple desktops open on my imac, but I find that when I am VNC-ing into the imac and then open up parallels in a full window that I am then unable to switch back to my other OS X desktops unless I completely shutdown my windows VM. Normally hotkeys works for me to switch between desktops (and still works when switching from OS X window to OS X window), but it just doesn't do the trick here. I know could just configure my imac so that parallels doesn't open up in full screen mode, which would solve the issue, but I feel like there's gotta be a way to switch desktops while VNC-ing! All tips appreciated!
Thanks,
KP

Hi,
This is possible using access restrictions in Universe designer based on user login.
For eg. there is user A,B and C and three connections C1,C2 and C3.
In Manage access restrictions you have to create a three restrictions(R1,R2 and R3): one using C1,second C2 and third C3.
Apply these three restrictions to corresponding to the users. i.e. R1-->A,R2-->B and R3-->C.
So based on user login the instance will be used for same report.
In IDT , I think this can be done using Data Level Security, but the concept wil be same.
Thanks
Gaurav

Is there a way to switch between different tabs using your keyboard (eg CTRL+T) instead of clicking with the mouse?

I would like to you use the keyboard to switch between tabs but I couldn't find if this is possible.

Ctrl + Tab

Switching between multiple takes?

Hi,
I am having a problem. I am recording multiple passes of drum tracks on top of each other. Is there any way to switch between them, so I can compare? I cannot figure this out. Any help? Thanks.

I'll second mr loops suggestion of using folders. It's absolutely the best way to take advantage of the multiple tracks in Logic, while maintaining some form of organization.
Especially when a typical drum tracking session can range from 8 to as many as 16 (or God forbid more) tracks, per take.
I like to throw take one into a folder, name it take 1, and even color code the folder. So now, all the drum tracks within that folder have taken on that color.
Record take 2, pack those tracks into a folder, name it "Take 2", and color that folder something different.
After you have recorded all your takes (for sanity's sake, let's say there's 4 takes). You can then make cuts on all those folders, over the various sections of the song, and place all the different sections of the different takes into a "Master Folder".
When you find the various sections from the various takes that you want to use, simply merge that master folder. Then, when you double click into that folder, you'll see all the various colored tracks, from the multiple takes, that were used to make the final comp.
From within this folder, you can add your cross fades, and fine tune your edit points.
Lastly, when your satisfied with it all, you can utilize the "Export All Tracks as Audio Files" function. Since you're doing this from within the folder, only those tracks will be exported.
You then have continuous audio files to bring back into the song, if you prefer to work that way. You can always keep the original folder takes around, should you later decide to re-address a section.

Switching between multiple libraries

So heres the deal. I have a 30G Video and my father has a 30G Video also. He likes his music the way it is and I do too. I have heard that you can create multiple libraries so you dont have to create different Login names (windows, we both share one computer.) So the thing is, how do you switch between those libraries? I tried just opening the library but all that does is add my library to the current one.
How can I swith between multiple libraries with ease and without messing any of the music in them up.

I downloaded a program that allows me to use it, thanks

Is there a short key to switch between the tabs ?

Just like you alt+tab to switch between windows, is there a short key to switch between tabs?

Hi ssagaji,
You should take a look at the [[Keyboard shortcuts]] Knowledge Base article. You can use ''CTRL + 1'' through ''8'' to switch between tabs.
Hopefully this helps!

Switch between multiple quicktime movies on a single page

I want them to play in a single window but use clickable links to switch between .mov files. I am working in DW CS5.

It depends on the code you are using to play the movies but it could be done with javascript. Although unless you are streaming the Quicktime movies, like a youtube, you will be forcing the user to download all the movies to load the page. If they are not setup to stream then you might want to load a separate page for each movie. If you show us the code you are currently using to play the movie we can help you through the process.

Crystal Reports - Switch between multiple databases at runtime (esp. DB2)

Hi,
we are currently developing a reporting application in .NET (C#) with an integrated Crystal Viewer. We want to be able to change the databse dynamically at runtime, especially between different DBMS.
We encountered no problems when switching between a SQL Server and an Oracle DB, but we ran into big trouble if trying to connect to a DB2 db.
In the report itself we have a SQL Server connection defined that is used during the design phase.
In our application we change the connection at runtime using the following code:
CrystalReportViewer viewer = new CrystalReportViewer();
ReportDocument document = new ReportDocument();
document.Load("<<path>>");
Tables tables = document.Database.Tables;
foreach (Table t in tables)
    ConnectionInfo info = new ConnectionInfo();
    info.UserID = "<UserId>";
    info.Password = "<Password>";
    info.ServerName = "<DSN of DB2 DB>";
    info.DatabaseName = "<DB2 DB Alias>";
    TableLogOnInfo tableInfo = t.LogOnInfo;
    tableInfo.ConnectionInfo = info;
    t.ApplyLogOnInfo(tableInfo);
// ... Setting parameter values ...
viewer.ReportSource = document;
We also tried to add the following lines of code after the "ApplyLogOnInfo" call without any success:
t.LogOnInfo.ConnectionInfo.UserID = "<UserId>";
t.LogOnInfo.ConnectionInfo.Password = "<Password>";
t.LogOnInfo.ConnectionInfo.ServerName = "<DSN of DB2 DB>";
t.LogOnInfo.ConnectionInfo.DatabaseName = "<DB2 DB Alias>";
Especially we are wondering because we don't get any error message. The Crystal Viewer just opens and shows an empty report without any data records. The TestConnectivity method called on each table (we are only using one table at the moment) also returns true.
Furthermore it seems that whenever we call ApplyLogOnInfo, the UserID, password, server name and database name is resetted to the values defined in the data connection within the report (SQL Server, used in the desing phase as mentioned above).
Any ideas, what we are doing wrong?
Kind regards,
Markus
Edited by: X-Giesi-X on Feb 10, 2010 4:53 PM

Hi Markus
OK. Make sure you have the latest updates. First apply SP 2:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Than FP 2.4:
https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
Next, open the report in the CR designer and enable the "Verify on first refresh" option (File | report Options)
If that does not help, export the report to rpt file format and try to view the exported report in the CR designer. What do you see?
Ludek

Switching between multiple tabs?

Similar Messages

Maybe you are looking for