Switching OFF the custom switch

Hi Experts,
I am planning to use switch mechanism to work on system enhancement. On this way, I have created a custom Switch and package, Using transaction code SFW1 I have activated same. If I want to deactivate the switch what is the procedure? Any Tcodes??
Can I switch ON/OFF custom switches? How about in case of standard switches?
Thanks in advance,
Chand

Dear Linda,
I recall switching off the buffer in one of my projects. We did not encounter any problems, since it was a rare activity. Therefore, I do not expect any performance issues on this matter. Anyway, I presume, one can always switch it back.
Regards,
Eli

Similar Messages

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How to switch off the induction furnace with LabView efter an LCF test is finished?

Hi,
I am working with low cycle fatigue testing at Instron 8801 and are
using Instron Fast Track2 LabView LCF software for controlling tests,
read the files, calculate modulus, etc. and produce figures. For
heating of the specimens during LCF-tests I use induction furnace with
Eurotherm 2604 controller. The problem I have is how to stop or switch
off the induction furnace when the test is finished?
I would be very grateful if You have any suggestions how to solve this
problem.
Regards

That depends on how you want to turn it off. I am not familiar with the Instron Fast Track, but the Eurotherm can be controlled directly from Labview using the modbus comms. When the test is finished, you can send a reset program command(if a program is running), or send a different setpoint, etc.
If you have digital outputs available on your computer, you could wire one of them to a digital input on the 2604 to do just about anything.
If you have the OPC version of Eurotherm iTools, you can control the 2604 with Datasocket connections.
Please give a few more details, and maybe we can figure out the best way to do it.

How to switch off the Yellow "Required Field" color in 9i?

I'd like to know how we can switch off the yellow background that appears on Required Fields (but still leave the required fields as required).
We are migrating our Forms 3.0 application to 9i and have not set the Required attribute for all our fields (some are auto-populating, some are just not set correctly) so some forms look strange with some mandatory fields yellow and some not. We have over 550 Forms and are at release one of our migration so we'd rather not worry about setting fields correctly this for this phase.
Cheers,
Tim.

found the answer:
in $oracle_home/forms90/java/oracle/forms/registry/registry.dat set:
app.ui.requiredFieldVA=false
you can also set the color:
app.ui.requiredFieldVABGColor=255,0,0

How to switch off the red light (optical out) on my Audigy 2

I am not using the optical out most of the time, is there a way to switch off the red light coming out of optical out?red light is causing heat leading to cracks on the surface of the card.Please help soon. thx

Are you sure? AFAIK, LED's don't produce any significant amounts of heat. And, no, I don't think the light can be switched off.
-Dave
?[email protected]

How to switch off the IPad 2

I can't switch off my IPad 2. there is the Backup ICloud note open which I can't cancel and this creating a blok to switch off the IPad, in fact when I try to close with conventional method I can't slide the stop icon.
Some body know how to switch of with a different method?
Stefano

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How to switch off the pop-up message in rspcm

Hi there,
Does anyone know how to switch off the pop-up message in rspcm?
The monitoring user shouldn't get the pop-up below anymore:
Statusänderung des Requests Sollen Folge-Events ausgelöst werden?
The pop-up in english might be
status change of request - trigger subsequent processing? or similar
We would like to outsource the process chain monitoring (rspcm) to our operating.
But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
Thanks for your help in advance.
Regards,
Wolfgang Smetana

Elena,
Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
Arun

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

How to switch off the Wireless Transmitting of the xDock for the iPod?

Hey,
Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
Thanks for your help. ;-)
Hi,
Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
Vielen Dank im Vorraus f?r eure Hilfe ;-)

turn it into standby mode
unplug the power supply from the x-fi dock
press the volume controller and hold it while plugging the power supply
the link control led on the backside will glow shortly and and turn off
thats it
to reactivate it press both the forward and backward wind button for at least 3 seconds
But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

How to switch off the constraints of database tables

hi
how can i switch off the constraints of database tables?

But do remember that if once you disable to constraints, enter some data and then try to enable again. If there is some conflicting data, Oracle is going to cry and will not allow you to enable the constraints.
Sidhu

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

you can suggest it here - http://www.apple.com/feedback/iphone.html
And it is only a problem if you want a blank first screen. Personally, it would drive me nuts always having to swipe over one page to get to my apps - the only time I unlock my iPhone is to use it or run an app, so no, I have no need nor desire to have a first screen with no icons at all.
But, if they'd put it in as an option so people like yourself can also have what they want, that's fine too So send them your feedback (they actually do listen - iOS 5 includes a number of things people have been asking for on these forums, like being able to delete individual entries from the call history, inproved alerts/notifications, being able to opt out of all the location based data they collect,...).

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

Switching off the workflows...

During actual production cutover, we need a means of switching off team center and other workflow updates that send information out of SAP during conversion runs and switch them back on again after conversion.
We need something that we can use (like a flag or switch) repeatedly for the release
HEY guys anyidea what can be done about this.. .need to this ASAP... going live in a few days....
Thanks in advance
Update :
For example
Now for a vendor create or change workflow.. we neeed to switch on or off the workflow depending on who is running it.. no which is std WF for vendor ?? i know questions are bit random... any help will do at this point
The business object BUS1008 for vendoe shows a stop sign...what exactly does that mean
The business object BUS2020 ACCOUNTS PAYABLE for vendoR is not implemented
The businedd obhect BUS3008 is active but the event is not implemented or released ..
These are all the details that i have... now i am not really sure who told these ppl that a workflow is triggered at all which sends the data to the Team center..
Any ideas ???
Message was edited by:
Abhishek Dhoundiyal
Message was edited by:
Abhishek Dhoundiyal

Hi,
Though I did not understand what you exactly need I can answer some of the questions you have asked below:
A stop sign in a Business Object indicates that the BO is obsolete and there is a newer version that is available. For example in the case of the vendor the newer version in LFA1.
To understand the various phases in a BO development then refer to this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4ab0e453d11d189430000e829fbbd/frameset.htm
Now coming to the main question of switch off the workflow depending on some criteria. I guess this can be acheived through start conditions. Though a proper business scenario is needed to justify why some people are exempted from the workflow process you can do this through start conditions. You will need to maintain a table where you update the table with the users for whom the workflow is not active and at runtime check the "Document created by" user and check it against the table and update an attribute and have the workflow start on the basis of this attribute.
Hope this helps,
Sudhi

Switching off the buffering of number range for Trips (travel expenses)?

Hi,
In Tcode SNRO object RP_REINR has a buffer of 10.
If this is switched off, it could influence the performance.
Has anyone had any experience in switching off the buffering of number range for Trips (travel expenses)?
Thank you.
Kind regards,
Linda

Dear Linda,
I recall switching off the buffer in one of my projects. We did not encounter any problems, since it was a rare activity. Therefore, I do not expect any performance issues on this matter. Anyway, I presume, one can always switch it back.
Regards,
Eli

Switching off the filter area in Workbook 3.5

Hi guys,
how can I switch off the filter area in the old version of the analyzer workbook 3.5.
This area is always on the left part of the workbook on the top.
In this workbook I need only the table with the result.
Regards
Erwin

Hi Erwin,
As I know you can hide the filter for key figures but there is no way to hide the characteristics filter. The only option is do not include any characteristics in Free characteristics or row area (not a feasible option in many cases) but if you don't want any characteristics data then you can go for this option.
Regards,
Durgesh.

Switching OFF the custom switch

Similar Messages

Maybe you are looking for