SXMB_MONI is not showing any messages flow

Hi,
I am sending a request through SOAP adapter to SAP system. My scenario is executing fine. One strange thing I have seen is, in RWB, Message Monitoring I can see my outbound message and inbound message but in component monitoring I cannot see my SOAP adapter and RFC adapter are active.
Note: one more thing is I can not see anything in SXMB_MONI; no message flow is showing
Can any one tell me whats happening?

you need to have entry in SXMB_ADM entry in our XIserver
category :RUNTIME parameter:Logging value :1
category :RUNTIME parameter:Logging_sync value :1
category :RUNTIME parameter:Trace_level value :1
Regards
Sreeram.G.Reddy

Similar Messages

My mail account appears to be frozen. It will not show any messages or let me go to my inbox

My mail account on the iPad appears to be frozen. It will not let me do anything including returning to the inbox. It just says "no message selected" Any suggestions?

Try deleting the account and re-adding it.

SXMB_MONI is not showing messages

Hi all,
I did file to file scenario for the first time after installation.I got the output file also.My source and reciever adapters showing succeses messages in RWB.
But I am not getting any messages in SXMB_MONI.
please guide me....
Thanks,
Vijaya

Hi Bhavesh ,
1) my system date is 28.04.2010.
2) adaptor monitor the dates are as follows
Details for http://sap.com/xi/XI/System:File on node Server 0 0_46786
Status Name Text
commch_recv Receiver Adapter v1027 for Party '', Service 'BS_DHI':
Configured at 17:20:02 2010-04-28
Up and running - no message processing until now
commch_send Sender Adapter v1014 for Party '', Service 'BS_DHI':
Configured at 17:20:02 2010-04-28
Up and running: Last message processing started 17:20:02 2010-04-28
last poll interval started 17:30:02 2010-04-28
length 10,000 secs
Displayed 2 entries for http://sap.com/xi/XI/System:File on node Server 0 0_46786
3) End of Execution From 28.04.2010 15:49:04
End of Execution Until 29.04.2010 00:00:00
any inputs........plz?
Vijaya

Sender File Adapter - No error, but not generating any message

I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.

I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames     RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue     'B'
Buildings.fieldSeparator     ','
Buildings.endSeparator     'nl'
Buildings.keyFieldInStructure     ignore
Additions.fieldNames     RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue     'A'
Additions.fieldSeparator     ','
Additions.endSeparator     'nl'
Additions.keyFieldInStructure     ignore
Floors.fieldNames     RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue     'F'
Floors.fieldSeparator     ','
Floors.endSeparator     'nl'
Floors.keyFieldInStrucutre     ignore
Rooms.fieldNames     RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue     'R'
Rooms.fieldSeparator     ','
Rooms.endSeparator     'nl'
Rooms.keyFieldInStructure     ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
   <Buildings>
      <PLTXT/>
      <STORT/>
      <STREET/>
      <POST_CODE1/>
      <CITY1/>
      <REGION/>
      <PARNR/>
      <X_COORD/>
      <Y_COORD/>
      <ASSIGN_SQ_FT/>
      <BLDG_NUM/>
      <CAMPUS/>
      <GR_SQ_FT/>
      <NET_SQ_FT/>
   </Buildings>
   <Additions>
      <ASSIGN_SQ_FT/>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <BLDG_USE/>
      <BLDG_NUMBER/>
   </Additions>
   <Floors>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <FLOOR/>
      <ASSIGNABLE_SQUARE_FOOT/>
      <BLDG_NUMBER/>
   </Floors>
   <Rooms>
      <SHTXT/>
      <MSGRP/>
      <ADDITION/>
      <ASSIGNED_DEPT/>
      <BLDG_ABBV/>
      <FLOOR/>
      <CAMPUS/>
      <AREA/>
      <RCD_CODE/>
      <DEPT_CODE/>
      <BUILDING_NUMBER/>
      <ROOM_COMMON_KEY/>
   </Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

MB1B: Variant transaction is not showing the message of document creation

Dear MM EXPERTS n GURUS,
When we create any document using T-Code MB1B, on successful posting it gives a message: Message no. M7060, Document 4900556951 has been saved and is stored in the database.
Now, we have created an variant of this Transaction (ZMB1B) and assigned this Z-Transaction to the user. Original Transaction (MB1B), has been blocked for that user, because - user should use only ZMB1B.
Problem is that after saving the document in Z-Transaction, user come out to main screen (SAP EASY ACCESS Screen) with a message You are not authorized to use transaction MB1B Message no. S#077
While document has been saved in database.
Why it is not showing the message - Message no. M7060, Document 4900556951 has been saved and is stored in the database.
Thanks in advance.
DSC

Dear GURUS n EXPERTS,
As I have mentioned in my previous thread - After creation of Variant if I block or not assigned the original T-Code i.e. MB1B, system gives message Message no. S#077 You are not authorized to use T-Code MB1B.
If I don't block the or assigned the Original T-code, there is chance to user will use original T-Code instead of variant.
How can we solve this problem.
Please advice.
With thanks,
DSC

JDBC Receiver channel is not showing any payloads

Hello Experts,
My interface is ABAP PROXY to JDBC i am facing a strange issue in ECC moni payload is succesful in PI moni also Payload is black colour flag but my Receiver JDBC channel is not showing any thing but it is in green colour (it is not showing neither succes nor error messages logs are empty).Sender chaneels are working only problem with receiver JDBC channels
In DEV and PROD it it is working in QUAL it is showing this problem.I take the restart of QUAL server still it is behaving like that
Please throw some light on the issue any help is higlhly apprecaited.
Regards
Praveen

Hi,
first check in pipe line step call technical routing , mapping execution generated JDBC receiver message pay load or not.
if it is not generated then check mapping , if is is generated then restart the channel and check what communication channel name you given in receiver agreement.
monitor the same channel, if all JDBC receiver channels have same behavior then restart the JDBC adapter service in NWA.
rEGARDS,
rAJ

Some messages sent/received on my iphone and ipad do NOT show in Messages Beta. Why?

In the past 4 weeks I started experiencing this issue: some of the messages I send from my iphone and ipad will NOT show in Messages Beta for Mac OSX. Likewise, some of the messages received on my iphone and ipad often don't show on my Messages Beta.

HI,
The best I have on this at the moment is that the Messages App is still Beta.
Secondly there have been some changes to the way the iMessages parts are syncing.
This may be due to Apple making changes to the iMessages server and the resultant sync issue to do with that.
Of course in the change over, if my guess is right, some messages may have been lost.
Some of this seems to be altering the way Messages get Flagged as to whether they were delivered or not.
8:22 PM Wednesday; April 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mavericks Maps App not showing any images?

My Maps App on the new Mavericks OS is not showing any images.
Can anybody help me ?

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Preview does not show any postscript files

Preview does not show any .ps files in Mac OS 10.4.3. I get an error message "PostScript Conversion Error" when Preview tries to convert the ps file into pdf.
(I print online banking invoices to postscript using the print option "save as file", because the pdf option isn't always available as a file format.)
How can I view my ps files?
(this is a cross-post from the print/fax forum, as no one answered my question there)

Thanks for the tip. I downloaded Ghostscript, installed it but can't find it once installed and nothing has changed.
I did however find out that only my online banking PostScript files are unreadable. Other PS files I create with my Canon printer menu are automatically converted into PDF by Preview without a problem. So it must have something to do with the document header or whatever of the online banking files.

Mail will not receive any messages

As of 9:30 Thursday morning, Mail will not receive any messages. I can still compose and send but incoming messages just sit on Google's server (where I've been reading and replying). Nothing was changed, Connection Doctor shows everything to be fine, I've checked and reentered passwords, quit Mail, restarted the computer, etc.
Suggestions?

I tried that again, including another shut-down, and based on another link, changingthe"check for new mail" preference from "automatically" to "every 5 minutes."
No change.

Problem with Mail not showing new messages

Since 2 weeks, my Mail does not show any of my 'hotmail' messages receive. The connection diagnosis said there are no problem with the account and server. It seems to download incoming mail (which also show in hotmail) but Mail does not show any new messages.

Back up all data.
Select the problem mailbox in the mailbox list, then select
Mailbox ▹ Rebuild
from the menu bar.

HT4314 I have an IPhone an IPad1 and and IPod. The game center on the IPod will not show any of the games. Can anyone help with this?

I have an IPod touch 4.2 and the game center is not showing any of the games. My Ipad1 and IPhone are running from the same account and both work great. Any suggestions how I might solve this? Thank u

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

Active sync ms exchange not showing body message

Hello I got a problem regarding exchange active sync.
I got an email account based on office 365, works fine on any other apple devices but does not on an iphone 5s 32 gb.
It receives emails with big delay and does not show body message (charging mail...charging mail ...and then hangs without any reason).
Tried to re make the account and tested on other devices works fine. I'm getting mad.
Any other mail account (gmail) works fine. Tried right now on another iphone and it works!
The iphone with the problem's got 7 gb free space.
Any help ^

Ale,
I have the same problem!!!!!!!! With the iphone 5s 32 gb and ios 7.1.2
On iphone 5 with ios 7.0.x works fine
Any help please!!

SXMB_MONI is not showing any messages flow

Similar Messages

Maybe you are looking for