Sybase connection error

I am getting following error when running my bpel process:
file:/opt/oracle10g/product/10.1.0/oas_1/integration/orabpel/domains/default/tmp/.bpel_EBODProcess_1.0.jar/leasepak.wsdl [ leasepak_ptt::leasepakSelect_arg(leasepakSelect_arg_inparameters,RalCollection) ] - WSIF JCA Execute of operation 'leasepakSelect_arg' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. ; nested exception is: ORABPEL-11622 Could not create/access the TopLink Session. This session is used to connect to the datastore. See root exception for the specific exception. You may need to configure the connection settings in the j2ee/home/application-deployments/default/DbAdapter/oc4j-ra.xml and restart the server. Caused by Exception [TOPLINK-4003] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.DatabaseException Exception Description: Configuration error. Class [com.sybase.jdbc2.jdbc.SybDriver] not found..
I do not have directory j2ee/home... but have the file oc4j-ra.xml in j2ee/application-deployments/default/DbAdapter/oc4j-ra.xml which i modiefied but am still getting the same error.
Thanks.

Hi there,
you may need to add the Sybase driver to BPEL Server's (oc4j) classpath.
You can check out the BPEL dev guide at otn.oracle.com/bpel. Specifically in Chapter 20 there is a section "Third-Party Database Support". I am copying from there:
At run time, you must put the driver's JARs on the application server's classpath. You
can do this in the following ways:
■ Edit the classpath in the following files:
(standalone) Oracle_
Home/integration/orabpel/system/appserver/oc4j/j2ee/home/config/application.xml
(regular middle tier) Oracle_Home/j2ee/OC4J_BPEL/config/application.xml
■ Drop the JARs into the following directories:
(standalone) Oracle_
Home/integration/orabpel/system/appserver/oc4j/j2ee/home/applib
(regular middle tier) Oracle_Home/j2ee/OC4J_BPEL/applib
If you look at the application.xml you may notice this is how we include the jdbc drivers for olite, i.e.
<library path="C:\OraBPELPM\integration\orabpel\lib\olite40.jar"/>
Good luck!
Steve

Similar Messages

Sybase Connection Error - cannot establish database connection

BO Data Services Tool -> Creation of new Data Store -> Sybase ASE
When I tried to create a sybase datastore(New connection), I've got this error message. But I am able to connect to sybase database with client application with same connection parameter. I appreciate if someone come across same issue.
ERROR MESSAGE
*WARNING: Cannot establish database connecton.
u2018Sybase connecton error: <Sybase ASE Server message number <1640> State <2> Severity <16> From Server <tstlS03>: Message Text is:
Adaptve Server requires encrypton of the login password on the network.
Sybase ASE Server message number <4002> State <1> Severity <14> From Server <tstlSO3>: Message Text is: Login failed.
Sybase CS Library message number <6717S468> Severity <4>: Message Text is: ct_connectO: protocol specific layer: external error: The attempt to connect to the server failed.>.u2019 lODI- 1111341)

I tried to create repositories for sybase, it failed. But it succeeded when created datastore. The procedures's as follow:
1. Create ODBC for this sybase connection, and it should display "Connection successful" when you click "Test connection".
(you need to specify several parameters like user id & password, server,database name and file, etc.)
2. Create datastore by using ODBC connection.

Transparent gateway to Sybase: connection error

I have been trying with little success to set up a transparent gateway to a sybase server.
The gateway is an NT 4 workstation, with an oracle server 8.1.7 installed. The sybase server is an ASE 12.0 on a Solaris 8 box.
Are these versions of the products supported? In the gateway documentation only Sybase 11 is mentioned...
Moreover all the examples/schemas given refer to an installation of the gateway on the same machine as the sybase server, whereas in my case the gateway is installed on a separate machine (but it is also stated that this configuration is allowed, provided a sybase client is installed togheter with the gateway).
From what I can make of the error messages / trace files, the problem lies in the gateway not finding the sybase server. But from the sybase client installed on the gateway machine I can connect to the same remote sybase server without hassles, so the sybase client is configured correctly.
Thanks for help,
Gaetano Giunta
Here's the complete details about the situation:
Sybase client version:
Sybase ASE client, version 12.0
sybase environment variables:
SYBASE=e:\sybase
SYBASE_OCS=OCS-12_0
Sybase server:
Sybase ASE 12.0 on Solaris 8
The platform/OS on which the gateway and database reside:
Windows NT 4.0 + SP6a
Machine Name: fsiazi08
Oracle database server:
Oracle 8i enterprise edition, Version: 8.1.7
Oracle SID of the Oracle database server
SID: gate
Full pathname to directory where the Oracle database server is installed
ORACLE_HOME: e:\oracle\ora81
Versions of Net8 Server / client used by the gateway & database
Net8 Version: 8.1.7
Net8 Adapter used by the gateway: TCP/IP
Oracle Transparent Gateway for Sybase:
Version: 8.1.6
Full pathname to directory in which gateway resides:
Path: e:\oracle\ora81\tg4sybs
Listing of spool log if using SQL*Plus, or the SQL statement and error message received
SQL*Plus: Release 8.0.5.0.0 - Production on Mon Feb 18 10:27:51 2002
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL> select * from "bdvo"."arcofifo"@pollo
2 /
select * from "bdvo"."arcofifo"@pollo
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for SYBASE]ct_connect(): directory service layer: internal directory control
layer error: Requested server name not found.
ORA-02063: preceding 2 lines from POLLO
SQL>
Listings of key files:
tg4sybs_agt_pid.trc log file gathered with HS_FDS_TRACE_LEVEL=on
(0) [Transparent gateway for SYBASE] version: 2.0.4.0.0009
(0) connect string is:
(0) YEAR2000_POLICY=-1;CONSUMER_API=1;SESSION_BEHAVIOR_FLAGS=4;PARSER_DEPTH=2000;E-
(0) XEC_FLAGS = 131080;defTdpName=tg4sybs;binding=(tg4sybs,SYBASE,"sqlbdvlin1");
(0) ORACLE SYBASE GATEWAY Log File Started at 15-Feb-02 16:54:43
(0) ct_connect(): directory service layer: internal directory control layer error:
(0) Requested server name not found.
(0) Unexpected error: Get Sybase Logon: app:TG4SYBS$2, user:, pass:,
(0) service:sqlbdvlin1.TG4SYBS$2, server:sqlbdvlin1
(0) Unexpected error: , connect
(0) ct_connect(): directory service layer: internal directory control layer error:
(0) Requested server name not found.
(0)
(0) Closing log file at FRI FEB 15 16:54:44 2002.
inittg4sybs.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an SYBASE gateway Agent.
# HS init parameters
#HS_FDS_CONNECT_INFO=sqlbdvlin1.master
#HS_FDS_TRACE_LEVEL=OFF
HS_FDS_CONNECT_INFO=sqlbdvlin1.procs
HS_FDS_TRACE_LEVEL=on
# Environment variables required for the non-Oracle system
set SYBASE=e:\sybase
set SYBASE_OCS=OCS-12_0
tnsnames.ora
# TNSNAMES.ORA Network Configuration File: E:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
GATE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fsiazi08)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = gate)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fsiazi08)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = gate)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
tg4sybs = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=fsiazi08)(PORT=1521))
(CONNECT_DATA=(SID=tg4sybs))
(HS=OK)
listener.ora
# LISTENER.ORA Network Configuration File: E:\oracle\ora81\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fsiazi08)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = fsiazi08)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = gate)
(ORACLE_HOME = E:\oracle\ora81)
(SID_NAME = gate)
(SID_DESC=
(SID_NAME=tg4sybs)
(ORACLE_HOME=E:\oracle\ora81)
(PROGRAM=tg4sybs)
CONNECT_TIMEOUT_LISTENER = 0
Sybase interfaces file (e:\sybase\ini\sql.ini)
;; Sybase Interfaces file
;; <link_type>=<network_driver>,<connection_info>
;; Examples:
;; [JUPITER]
;; QUERY=NLMSNMP,\\JUPITER\pipe\sybase\query
;; WIN3_QUERY=WNLNMP,\\JUPITER\pipe\sybase\query
[bdvlin1]
master=TCP,10.1.1.238,4000
query=TCP,10.1.1.238,4000
Sybase net-library configuration (e:\sybase\ocs-12_0\ini\libtcl.cfg)
; This is the sample Net-Library configuration file which
; shows how to specify the different types of drivers which
; will be used by Client-Library and Server-Library
; applications.
; This is the sample for NT platforms.
[DRIVERS]
NLWNSCK=TCP Sockets
NLWNSCK=TCP/IP Sockets
;[NT_DIRECTORY]
;REGISTRY=LIBDREG ditbase=SOFTWARE\SYBASE\SERVER
;[SECURITY]
;NTLM=LIBSMSSP

Gaetano,
The supported products that we list in the manual is only what we have tested at print time. However we update our certification matrix regularly.
Please refer to the certification matrix on Technet.com ( http://otn.oracle.com/products/gateways/pdf/certmatrix2.pdf) for the latest certified configurations.
It looks like you have installed the gateway in the same Oracle home as the database. With v8.1.6 of the gateway this is not possible. With v9.x onwards this is possible.
You can either reinstall the gateway in another Oracle home or upgrade to v9.x.
I recommend that you upgrade to v9.x, since v8.x will be desupported shortly.
As of v9.x the Sybase gateway is located on the database CD and you can install it by doing a custom install.
Vira

Sybase connection errors with SSDT

Hello All,
I need help.
I'm designing datamodels in SQL Server Data Tools but am having trouble connecting to my Sybase DB (or anything other than MSSQL). The Sybase client is installed and I'm able to connect and browse to the DB via Sybase Central. However, in SSDT, I get the
error message:
Failed to connect to the server. Reason: The 'ASEOLEDB' provider is not registered on the local machine.
What do I need to install/configure to make this work?
SSDT: Visual Studio 2010 Shell ver 10.0.40219.1 SP1 Rel
Windows Server 2008 R2 Enterprise x64bit
Sybase Central ver 6.0.0.4787, Sybase IQ ver 15.3.0.110506
Thanks,
Carter

Hi Carter,
Base on my research, the error "The 'XXXX' provider is not registered on the local machine." was caused by that Visual Studio can only recognize 32bit providers for OLEDB providers, however, for .NET providers, both 32bit and 64 bit providers can be
listed in VS. To avoid this issue, please install both 32bit and 64bit
Sybase OLEDB provider and then reference the provider using ASEOLEDB in SSDT.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Error Opening a Sybase Connection

Ok, this is the first time i have tried to establish a sybase connection before but this is what i did.
I went to the sybase site and downloaded the new JConnect 5.5 and 4.5
I installed it and it is setup in my classpath. jisql works properly so i am sure i have jConnect setup properly.
So i use IBM visual age for java to program and i imported the jconn2.jar file so i could have the proper drivers, i am sure this imported properly becsaue one of the warnings on my class of not having the proper "com" installed have disapperead. When i try the connection for the DB the error message i am getting is as follows...."java.lang.ClassNotFoundException:com.sybase.jdbc2.jdbc.SybDriver"
i am importing "import com.sybase.jdbcx.SybDriver;"
and my code to create the connection is as follows.....
url = "jdbc:sybase:Tds:testa:4100";
try
Class.forName("com.sybase.jdbc2.jdbc.SybDriver").newInstance();
Connection con = DriverManager.getConnection(url,"sa", "sadummy");
Statement command = con.createStatement();
//the rest of the code...........yada yada
I guess i dont understand what i an doing wrong to create a connection with the sybase server. Any suggestions would be great!
Thanks
Chris P.

i have figured this out please ignor ethis message
i did not ad the classpath into the run for the main() (when compiling)

IOS connecting error?!?!?!

My iMac 24" (bought in 2007-2008) is connecting perfectly to my airport extreme base station. The problem is, that's the only thing that will connect perfectly fine out of all of my Internet junk(well, maybe not junk but...). My macbook will connect but the Internet will not work, in other words, the computer thinks it is connected but it's not and it shows full connection in the status(I even put it right ON TOP of the base station and still nothing!). Now you're thinking, Why is this titled iOS connecting error? Well, that is because all of my iOS devices will not connect, they all have the same problem my macbook has, they think they are connected, they show great status, but when I enter safari a notification comes up and says, Safari can not connect to the Internet... blah blah blah!!!
PLEASE HELP!!
PS: I already talked to an Apple store genius and he said to update the software on it, but the software was already up to date.
PPS:He also said to change it to 2.4 GHz, but I can't figure out how to change it.
HELP IS APPRECIATED!!!

Hi,
I am creating a native iOS application using smp2.3. I want the application to be connected through Relay server but i am not able to understand as where to put the relay server connection properties.
I have put the below code in Appdelegate.m:
SUPConnectionProperties* props = app.connectionProperties;
    [props setServerName:self.serverName];
    [props setPortNumber:[self.serverPort intValue]];
    [props setUrlSuffix:@""];
    [props setFarmId:self.farmID];
    SUPLoginCredentials* login = [SUPLoginCredentials
                                  getInstance];
    if(self.manualRegistration)
        login.username = self.connectionName;
        login.password = nil;
        props.activationCode = self.activationCode;
    } else {
    props.loginCredentials = login;
    login.username = self.userName;
    login.password = [smp101vault getString:@"password"];
    props.activationCode = nil;
when I am compiling the app it is giving errors like sybase.sup.h, SUPClassMetaDataRBS.h file missing and use of undeclared identifier SUPConnectionProperties.
Please help me in resolving this error.
Thanks
Neha

Data Federator data source not available causes Universe Connection error

I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

RFC connection error when registering PROGRAM ID.

Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.

Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 -> Done2. Create new destination of type T (TCP/IP) -> Done
3. Make sure you select Registered Server Program option before writing your program ID -> Done
4. Write you program ID (remember it's case-sensitive) -> gave the SID name
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) -> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out.

RFC Connection Error during Web AS ABAP Database Instance

I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.

try moving all your install disk onto local file system then rerun the install. That might work....

Haven't been able to connect to itunes for 3 days. Says connection error but im connected to the internet

I haven't been able to connect to itunes for 3 days. It says theres a connection error, yet I am connected to the internet. I have redownloaded itunes and still get this message.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Sybase connection error

Similar Messages

Maybe you are looking for