Problem in Screen

Hi,
I am using the Main Program of the Sap Layout used to print the Invoice. This Programs Original Language is DE. The Program Type is Executable. I have created a Screen called 1000 and calling it in the following form.
FORM entry USING return_code us_screen.
  CALL SCREEN 1000 STARTING AT 30 5 ENDING AT 61 7.
  CLEAR retcode.
  xscreen = us_screen.
  PERFORM processing USING us_screen.
  CASE retcode.
    WHEN 0.
      return_code = 0.
    WHEN 3.
      return_code = 3.
    WHEN OTHERS.
      return_code = 1.
  ENDCASE.
ENDFORM.       
The following error is through when go and preview the Layout.
Runtime Errors         DYNPRO_NOT_FOUND
Screen does not exist
Thanks in Advance,
Kishan

Hi again,
1. DYNPRO_NOT_FOUND
   Whenever this  message comes
   it is usually our problem.
2. The MAIN PROGRAM of your created screen,
   is not correct.
3. What is ur main program.
  Z**
  or sap std program.
4. Goto SE80.
   Type in the main program.
5. Does ur new screen (1000 or 9100 whatever)
  appear in the screen folder list?
6. Is the screen  activated   ?
   If not, please activate it.
7. How did u copy the standard program?
   did u copy it thru SE80?
8. For tcode VF03
    the main program is SAPMV60A.
   and not SAPLVMSG.
I may be repeating the same questions(as asked by others)
but, im sure, it is our problem.
ie. assigning screen number to main program
and activating it.
Regards,
Amit M.
Message was edited by: Amit Mittal

Similar Messages

  • My iphone 5 have problem with screen

    Dear Sir/Madam
    My iphone 5 have problem with screen, i could not control sometime because it frozen and appear white cross line. I have restore my phone, but issue still there
    I have same issue with this user on youtube http://www.youtube.com/watch?v=xpB7mqcWM1A
    Please help to advices how can i do now
    My Phone Information
    Serial Number F17JRZ55DTTP
    IOS 7.1.1(11D201)
    Thank and Regards
    Thanh

    Hi, I use my phone carefully, did not drop it before. I restored it cause i think problem come from jealbreak or software. It still happen.
    Currently, it is ok after i turned off the phone through night . Thank for your help

  • Problem with screen zooms in by itself

    I have a Nokia Lumia 625 and i m facing problem that the phone screen itself zooms in and i need to switch off to get back to actual scrren resolution
    RD

    darshik wrote:
    I am also facing same problem of screen magnification. Even when i am not using and phone is in my pocket, after a while i take a look its dinosaur fonts screen.
    phone is just 20 days old.
    only solution is too restart, no other function works.
    Did you try the solution provided in the post above yours ???

  • Problems with screen sharing

    Upgraded three systems to Mountain Lion yesterday (Early 2011 MBP, Mid 2010 Mini and Mid 2011 Mini). 
    I rely on Screen Sharing to maintain the two Minis using the MBP.  Now, while the Mid 2010 Mini can be accessed just fine, the same is not true for the Mid 2011 Mini.  After a long delay, a window will pop up but is black.  If I toggle between scaled and full screen a couple of times, the screen will be displayed but will accept no input.  Odd.

    I was able to resolve the problem with screen sharing from my MBP to my problematic Mini.
    My home network uses a Belkin N600 dual band router with both the MBP and Mini using the faster N band.  After switching the Mini to the slower band, screen sharing began working again.  My other Mini that worked all along was hardwired to the router so was not an issue.
    Oddly, with Lion, screen sharing worked having the MPB and Mini on the same N band.

  • Problem in Screen Exit

    Hi all,
    I have a problem in Screen Exit. My requirement is to create one new field in ME21N transaction code, I did that using screen exit, which offers me a tab of Customer Data. That is working fine. My problem here is when the user enters the value in that(costcenter) field tax jurisdication code should populate automatically for the particular entry. I used user exit for this purpose to update taxjurcode field in the table. But after the user exit execution the rest of the program code executes and it updates the EKPO table which over writes the entries which i was updating using my user exit code. How can i get rid off this problem. Please throw some light on that. Thanks.

    You are right. My user exit is also triggering that place only for the ME22n and ME23n...........it is strange for me as it is not working for ME21n. Which is not updating with the statements that i provided in User exits.
      When i am debugging the program after the user exit it is taking me to some std program where the entries were overwritten. That is where i face the problem.
    Any suggestions.

  • NMac Pro 6core D500 problems with screen refresh: 10.9.3 warning!

    Avoid 10.9.3 on the Mac Pro 6 core, D500.
    Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
    I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
    Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
    So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
    I would suggest not upgrading unless you have a 4k monitor.

    Avoid 10.9.3 on the Mac Pro 6 core, D500.
    Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
    I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
    Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
    So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
    I would suggest not upgrading unless you have a 4k monitor.

  • System startup Problem grey screen is going regularly and automatically shutdown

    Hi
       kindly resolve us this problem urgently
              error msg. :- System startup Problem grey screen is going regularly and automatically shutdown
    thanks
    Dhaval Oza

    Use RECOVERY MODE.
    Boot from another drive with a copy of OS X too is always good.
    A Safe Boot at a minimum.

  • MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

    Hi Frnds,Small Favour for me,...
    MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

    Hi Frnds,Small Favour for me,...
    MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

  • HT4623 problem with screen touch when during writing or opening icon the screen is flickering

    I have problem with screen touch, when I touch the screen to write something or open icon the screen is flickering and keyboard or icons begin jumping

    @ wesleyyin,
    certainly strange. Some questions to help with the diagnostics;
    Which TrackPoint cap you you have on your keyboard, soft domed, soft rim or classic domed (the hairy one)?
    Can you try disabling the TrackPoint to see the problem goes away?
    Anything else laid on top of the system or between screen and keyboard like a thin cloth or something?
    Thanks
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • My ipad 2 suddenly show red screen during start up and on ordinary screen show red colure fill the screen , I think it is hardware problem mostly screen. This problem didn't happen after fall or only accident ,what shall I do .

    My ipad 2 suddenly show red screen during start up and on ordinary screen show red colure fill the screen , I think it is hardware problem mostly screen. This problem didn't happen after fall or only accident ,what shall I do ?

    You could try a reset and see if that fixes it : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If it doesn't then you could try restoring to your last backup and/or resetting back to factory defaults. But if it's a hardware issue then you will need to contact Apple.

  • Satellite A - Problem with screen minimizing

    Good morning.
    Has anyone encountered the problem of screen minimizing, of having an open screen and clicking on the down screen arrow and instead the program minimizes.
    When opening an internet site having it open already minimized, or it opening in full screen and then minimizing for no reason.
    Is there a fix for this problem? Any answers or solutions would be appreciated.
    Thank you.

    hi SAVAGE,
    if you minimize the screen do you mean it changes from 17" to 15"...?
    i am kidding - of course.
    some more info were needed: which browser, version, is there a special website wich causes this problem?
    if there is javascript on this websites it could be possible that they are opening when loaded even when the browser is minimized
    after loading the webpage the browser take back control and minimizes the window
    upgrade/update your browser and the java environment.

  • Screen problems - black screen and lock-up (plus HDMI issues)

    Hi, I'm not sure if these are related to the same fundamental issue, but they are both serious problems that need resolution.
    I have a new mid-2012 MBPretina.  I am on all the latest updates (10.8.2).
    The first problem is the most recent, and the most serious problem.  Since I updated the Java a couple of days ago I've been experiencing random black screens and lock-ups.  Essentially, what happens is that sometimes when I perform an action (opening an app, clicking a link on a webpage, performing other kinds of in-app actions, etc.) the computer screen will go black.  About half the time I can, through my own memory, try keyboard combinations to quit or force quit the most recently used app (the one where the action was just performed), and I will get some glimpse of the underlying apps, while the menubar and other areas will remain black until I move a window on top of the black space.  Sometimes no key combinations work and I am forced to perform a hard restart with the power button.  This is a serious issue, obviously, since I will lose current work/progress in my apps.  I'm not sure if this is because of the new Java update, or has to do with something else, but it started happening shortly thereafter, over the last 2 days.  I work most of my waking day on my laptop, and this "black screen of death" has happened about 5 or 6 times a day.
    The second problem I have been experiencing since I starting using my MBPr with external HDMI displays in August/September.  The problem is that I will plug the MBPr into an HDMI display, the screen will temporaliy go black, and then bring me to the login screen (as if it's crashing, albeit softly).  This happens about 1 out of 4 times nowadays.
    How can I fix these problems, especially the first?

    UPDATE:
    Clearly there's a problem because a third of the way through a clean reinstallation from scratch it black screened again. Hmmmm.
    Now this is not good. Problem is I can't rule out potential updates from Apple that might have caused this either.
    The search for solutions continues.

  • Start-up Problem - White Screen Open Firmware

    Hi
    Just turned my eMAc on and got a new beeping sound, the little light on the front flashed several times and then the screen went completely white with the following message;
    Apple PowerMac 6,4 4.8.2f1 BootROM built on 03/11/04 at 09:18:55
    Copyroght 1994 - 2004 Apple Computer, Inc.
    All Rights Reserved
    Welcome to Open Firmware, the system time and date is: 07:26:35 10/20/2006
    To continue booting, type "mac-boot" and press return
    To shut down, type "shut-down" and press return
    ok
    0 >
    I typed in 'mac-boot' and return and everything starts and 'appears' to work as normal.
    I have shut down and restarted twice and the same thing happens. I also noticed that the push button switch seems to be sticking.
    My question is - Is this a hardware issue (the start button is faulty) or is it a software (firmware, corrupt file)?
    Many thanks for help and advice
    Mick

    It's possible it's a hardware problem, but first I'd suggest you try resetting Open Firmware:
    At the 0 > prompt, type:
    reset-nvram
    and press Return
    At the 0 > prompt, type:
    set-defaults
    and press Return
    At the 0 > prompt, type:
    reset-all
    and press Return.
    With luck, that will clear things and you'll be back to booting normally.
    Hope this helps.

  • New iMac crashes, start up problems, flicker screen...

    Purchased iMac four months ago. It seems to be a bit flaky – as a life-long and loyal user of Apple, not what I was expecting! Often have problems crashing or hard disc error messages at start up. Flickering screen.
    Also not sure that I got everything that I requested at the store – I had asked for an additional back up drive in store when ordered and I've looked on my iMac and it doesn't seem to have this. Currently backing up to iCloud and on DVDs to make sure I don't lose anything if my computer gives up the ghost and dies!
    Bit disappointed really. Never had problems with any Apple products before and saved up for quite a while to upgrade my very old G4 (which still runs like a dream, and only updated because it's operating system became incompatible with latest software updates) to a new iMac (which seems a bit buggy).
    Asked around and a few people have found iMac to be less reliable than previous Apple computers. Anyone else have problems with iMac seeming less stable?

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.
    You'll have to take up the missing backup drive with the sellers. The iMac doesn't come with one.

  • Start UP problems, blue screen, Imac (intel) 1.83  17"

    I posted this Saturday in a different area. So forgive me if I did this incorrectly.
    Imac DuoCore 1.83 (originall with 10.4 Tiger)
    Upgraded to Leopard several months ago without problems.
    Have the lastest updates.
    Two days ago the following started:
    1. Starts up-no chime
    2. Apple logo is seen (grey)
    3. light blue screen with progress wheel-not the pinwheel)
    4. screen dims a bit, progress wheel dissappears then comes back and it does
    the same thing.
    I ran the Disk First Aide from the CD, performed verify and repair disc.
    Came back with repaired completed. Everything seemed ok.
    Restarted...but the problem persisted.
    Next I reset the PRAM...
    Chime came back on start up.
    Ran the CD a few again. Said it was all ok.
    Restarted....and back to blue
    I ran hardware test from the original CD
    all came back fine. Two items were repaired.
    Restarted and back to the blue screen.
    Tried Single user interface and ran /sbin/fsck -fy
    Again 2 items were found and repaired.
    Restarted.
    Hardware and software seems to be fine acccording to this.
    SO it seems it's the PRAM battery. I think. ANy other ideaS???
    ALSO...this machine is out of warranty. Not afraid of cracking it open.
    But, where is the praam batter located? Like to know what the part number is to have it on hand when I open it.
    Any help appreciated.
    RLM

    I opened up my iMac and replaced the PRAM battery. No change.
    I then took out the Hard drive and placed it in my G5 destop.
    When i restarted it I could see the hardrive and it's contents. Both HD have
    10.5.7 installed so I thought I could restart with the Imac HD
    and then back it up. But it wouldn't start up and jumped to the
    G5's HD. My question is:
    1. Is the reason it would not recognize the iMac HD as a start up disk because
    it's from a duo core intel mac?
    2.Is it because the iMacs HD has some problems in booting up?
    (as I wrote before I have run every test available with positive results
    yet continue getting the blue screen)
    And since I can read and see the imac drive in my G5, how can I back it up short of dragging everything to a new drive since I can't log into the individual users. Of primary importance are the pictures in iphoto in different user accounts.
    Thanks for any help
    Richard
    Message was edited by: Richard Mora

Maybe you are looking for