Symbol starts only when it bacomes visible

Hi,
is there a way to start to play a symbol when it becomes visible on the screen? So it should play when I scroll down and it appears on the screen.

thanks, Jason.
I'm using DataGroup with a TileLayout. I had to set useVirtualLayout="true" to the TileLayout as it didn't seem to be defaulted to that value. Again thanks.
<s:DataGroup id="tileGroup" width="100%" height="100%" dataProvider="{_aShows}" itemRenderer="CustomlItemRenderer"
                              <s:layout>
    <s:TileLayout id="tileLayout" requestedColumnCount="3" clipAndEnableScrolling="true"
           useVirtualLayout="true"
            paddingLeft="0" paddingRight="0" horizontalGap="0"/>
                              </s:layout>
</s:DataGroup>

Similar Messages

Workflow starts only when initiated by specific user

hello,
Workflow starts only when initiated by specific user...need to get started who ever initiates it....
any help would be appreciated !!!
Thanks regards, Vignesh.

Hi,
Workflow start option:
Mannually started
Starts when item created
Strarts when item changed
please check which one of start option is set and also check whether selected "Require list mange permission" under mannual start option,if so uncheck or add users to have that permission
Let me know if you need help
Whenever you see a reply and if you think is helpful, click "Alternate TextVote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Alternate TextMark As Answer

May i know what is plugin-container.exe and why it need internet access , noticed that it started only when i visit any website has Flash containt ? is it adobe flash player plugin ? is it safe to use ?

May i know what is Plugin-container,exe and why it need internet access ? noticed that it starts only when visit any website has flash containt on webpage . is this adobe flash player plugin ? is it safe to use ?

See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

How can i start animation when iframe is visible?

Hello all.
I ve been working arround a problem i ve when i try to insert my animation into a slider in wordpress. The problem is that the animation start allways when the page loads the iframe that contains it , and i need that it starts when that iframe is visible (visibility:visible). Is it possible?
I figure that it should be a simple function on stage-creationComplete, but i really dont know how to do (i am not bad at design, but my programming skills are terrible).
Thanks!

To start the animation on just the iframe being visible just change the return statement in 'isScrolledIntoView' function .
Change the return value to
return (elemTop <= docViewBottom);
I think its works in Chrome when you run both the animate exported html and main html hosted from a server.Let me know if thats not the case

Laptop starts only when charger plugged in

I have a 15" powerbook G4 and suddenly it turns itself off automatically if i unplug the charger, its very weird. I have a battery and its charged, etc. etc., but it only wants to turn on when the charger is plugged.
Anyone have any clue whats wrong? Is there some random setting where it can be on only when its plugged in???
Thanks for any help

Have you used the PowerBook G4 Battery Updater 1.1? I couldn't get my brand new 1.67GHz 15" PB to work until I ran the updater.
http://www.apple.com/support/downloads/batteryupdate.html
If that solves or helps, please consider rewarding points using the buttons the top of my post.
G4 Cube, Power Mac G4 Mac OS X (10.4.8)

Whenever my iPod is turned off or goes into sleep mode, it hard boots everytime I turn it back on. This seems to have started only when I upgraded to OS6.

My iPod hard boots everytime I turn it on. I get the Apple logo and 5 minutes later it starts up. This seems to have started when I upgraded to OS6.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

XML PO is getting released from SRM only when Repeat Output is performed

Dear Experts,
Extended Classic Scenario(SRM-XI-SUS) inwhich SRM and SUS have on same SRM Server 7.0 but with differentt clients.
XML communication is being happened between SRM and SUS.
PO is created and ordered from SRM but it is releasing to SUS only when Purchaser in portal is performed Repeat Output manually or can say "Process for BBP_PO_SEND_XML Is Started" only when we click Repeat Output button by purchaser in portal login.
Replicating Steps :
1. Create shopping cart by Employee, Approve by Manager and PO is created(for say : 21111).
2. Open PO (21111) by Purchaser Login.
3. Go to Header Tab then Output sub tab.
4. Then i have to click Repeat Output button then only "Processing BBP_PO_SEND_XML Badi Is Started" otherwise not.
Thanks in advance.
Regards,
Pawan Keshwani

Hi,
Thanks for your reply.
I have configured Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
(CCMS monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
I am configured ESOA Architecture in XI for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
Not getting any messege in SXMB_MONI in SRM.
Regards,
Pawan Keshwani

MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

<http://support.apple.com/kb/HT6337>
"To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

HT1349 When listening to songs on my itunes acct (without ipod attached), I can only play one song at a time. It doesn't automatically play next song on list. It happens with all playlists. It only started happening when I downloaded the latest itunes upd

When listening to songs on my itunes acct (without ipod attached), I can only play one song at a time. It doesn't automatically play next song on list. It happens with all playlists. It only started happening when I downloaded the latest itunes update.

Are all songs checked in your playlist?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

Pavilion zd7000 starts in battery mode only; runs on AC only when connected to printer by USB port

My Pavilion zd 7379ea will only start up in battery mode. AC adapter appears OK with a firm green LED, so external power supply may not be the issue here? When I'm starting up (with what's left on the battery), both the charging LED and the AC LED are constantly blinking. When turned off, the battery LED is firm, and battery appears to be charging (but which obviously is not the case). Occasionally, when computer is turned off, the AC LED is lit with a firm light.
One odd thing I noted before this happened was that the computer ran on AC only when my HP printer was connected to one of the USB ports (no battery inserted). If I disconnected the printer USB cord, the computer just died immediately; it was like the computer was powered by the printer. Later I also discovered that the same cord (where it connected to the printer) had melted from extreme overheating. I tried to update the USB drivers for each port but it didn't change things. I also tried to connect a different printer to get the computer started but it didn't work this time. I'd be extremely grateful for any comments that may solve this power supply issue (and if possible explain the stuff with the printer connection).
S/N{removed for privacy]; P/N PH989EA#AK8

Hi,
Schindi285460 wrote:
My Pavilion zd 7379ea will only start up in battery mode. AC adapter appears OK with a firm green LED, so external power supply may not be the issue here? When I'm starting up (with what's left on the battery), both the charging LED and the AC LED are constantly blinking. When turned off, the battery LED is firm, and battery appears to be charging (but which obviously is not the case). Occasionally, when computer is turned off, the AC LED is lit with a firm light.
One odd thing I noted before this happened was that the computer ran on AC only when my HP printer was connected to one of the USB ports (no battery inserted). If I disconnected the printer USB cord, the computer just died immediately; it was like the computer was powered by the printer. Later I also discovered that the same cord (where it connected to the printer) had melted from extreme overheating. I tried to update the USB drivers for each port but it didn't change things. I also tried to connect a different printer to get the computer started but it didn't work this time. I'd be extremely grateful for any comments that may solve this power supply issue (and if possible explain the stuff with the printer connection).
S/N{removed for privacy]; P/N PH989EA#AK8
You unplugged a USB device while the notebook was still booted into Windows and on?
Normally that won't cause any issues but , If you did that you may have damaged your system board's Southport chip.
USB is not a plug n' play port like SATA and eSATA are.
Here is a link to the maintenence manual for your laptop series.
Is your notebook still within warranty? By the processor components listed in the manual,I believe it is probably not.
best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Is apple going to fix the magic trackpad issue with Autocad zoom/pan soon? It only started happening when I updated to Yosemite

is apple going to fix the magic trackpad issue with Autocad zoom/pan soon?
It only started happening when I updated to Yosemite
I am using macbook pro 15" Retina

Although it not only bothers me but alot of other photo booth users aswell

Sometimes when starting my iMac it shows a folder icon with a Question mark in it. Mac does not start up, only when shutting down and restart again solves it

Sometimes when starting up my iMac it shows only a folder icon with a question mark in it. Nothing happened. Only when start up again it runs ok.
What can be the cause of this.
thanks for your help
Hans

That's an indication your Mac can't find a system folder to boot from.
Open System Preferences > Startup Disk
Select: MacintoshHD OS X
For OS X v10.4, v10.5, and v10.6 > A flashing question mark appears when you start your Mac
Helps when you ask for help to tell us which Mac OS X is installed.
If you aren't certain, click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
The version is noted there.

Start automatically an action only when another action finish

Hi all,
first, sorry for my bad English....
I am an Italian Architect, I use Photoshop actions mostly to manage many big tiff files.
I try to solve this problem since long time.... but so far I can't.. :-(
This is my problem: I woul'd like to use some actions in sequence launcing only the first one, and when the first finish the second starts automatically, when the second finish, the third starts automatically, and so on.
Example
I have 3 actions and a folder "X" that contain tiff files:
I launch action "A" that resize, colorize, etc tiffs files in folder "X" and put them in a folder "Y"
only WHEN action "A" finish........
action "B" starts and works in folder "Y", grouping logically tiff files in some layerized PSD files and putting them in folder "Z"
only WHEN action "B" finish........
action "C" starts and works on PSD files in folder "Z" doing some "save as" at different resolution in some folders (folder "JPG", folder "PDF", etc)
I hope to explain clearly my problem.
Thanks a lot
Emanuela

Hi Mylenium,
I will try to call existing actions creating a new one (?), but I tell you that I don't understand your question "Does that not give the same result, just only per individual file?"
thanks
Emanuela

Symbol starts only when it bacomes visible

Similar Messages

Maybe you are looking for