Sync Error message reprocessing in MI server

In MI 2.5 server, all sync error messages with staus I-Error need to be resolved manually and then reprocessed.
Errors are generally data issues(Equipment type mismatch etc).
In MI 7.1 , there are better data monitoring and administration capabilities. Is there a better automated way in MI 7.1 where by some of the I-Error status messages could be corrected and reprocessed based on some defined logic and rules.
Thanks & Regards,
Amandeep Aggarwal

Hi,
custom services plugged-in in the message flow can be used to correct the fields of the message during the processing.
Since your requirement is to modify the message only incase of errors and during re-processing, the custom service has to be a little more intelligent than just modifying the data ..like reading from DOE monitoring data to figure out whether that message failed and is being re-started which is possible as far as i think.
In tcode sdoe_wb on selection of your SCV.,expand the data object and inturn the flow definition tree. Choose the flow where you wish to add a custom service. Press create button in right panel. Give FM or class method. Save it and generate your data object.The message body and the message header is available as parameters in the custom service , there are some specific places where a write service could to be placed and so on..
You can also refer the sample custom service SDOE_SAMPLE_CUSTOMSERVICE class shipped by SAP.
To know more about custom services, check out this link : [custom services|http://help.sap.com/saphelp_nwmobile71/helpdata/en/6d/bf104d163849d1af313c492655e0f7/content.htm]
Regards,
Liji

Similar Messages

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset.

Error message "cannot connect to server"

Often I get an error message "cannot connect to server" when
I want to connect to acrobat.com directly from a .pdf document in
order to upload it . Is it possible that there is some security
issue involved, e.g. that the document is protected somehow? Or
could browser or firewall settings be involved?

Hi Peterernst,
Thanks for posting.
Perhaps yes, firewall, and browser popup blockers have been
known to cause some behavioral, and connectivity issues within
Acrobat.com
Users have had success with allowing *.acrobat.com as a
trusted site locally, to see if that allows connectivity.
Also what browser, and OS are you using?
If still in the Unix environment, do you have access to a
Windows, or Mac environment?
Thanks!
Pete

When I try to send a photo by email, an error message reads "The email server didn't recognize your username/password combination" How do I fix this?

When I try to send a photo from iPhoto by email, and error message reads "The email server didn't recognize your username/password combination". How do I fix this?

Try to reenter you rmail account details in the iPhoto Preferences > Accounts tab.
Delete the mail account entry by pressing the "-" button below the left column in the panel, then add it again by pressing "+".
Also, it is recommended, to set "Mail" as mail client in the iPhoto preferences, and not iPhoto. This has been working much more reliably lately.

How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?

How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.

You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS

How to fix error message "the iTunes update server could not be contatced"

What is the cause of error message
"The iTunes update server could not be contacted. Please check your internet connection or try again"
I have set SSL 3.0 to on
used the itunes diagnostic to check internet connection and the reoprt is
Network connectivity
     Network interfaces verified OK
ITunes Store connectivity
     Internet connectionverified OK
     Secure link to iTunes store failed Red dot= NOT OK
deleted the SC file in SC info directory no success.
Any Suggestions
searchin for an answer

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

How do you resolve the computer error message "ipod software update server could not be contacted"

I am trying to restore my ipod touch but when I go to restore I get the error message "ipod software update server could not be contacted" What do i do?

Try here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Sync Error Message

I received a sync error message:
EFMSERROR.102
while I was trying to sync my ibook to .mac
How do I fix?

Hello pksolecki,
Welcome to the forums.
I would suggest you contact you mobile service provider and ask that this issue be escalated to BlackBerry support for in depth investigation and analysis.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Sync error message: CRRecurringl: SetRecurringDates Start date is invalid

Sync error message: CRRecurringl: SetRecurringDates Start date is invalid
I have deleted and re-entered every recurring calendar entry. This has not solved the problem.
I sync on 2 computers. The deskop computer using BB Desk Top 7.0 syncs fine. The laptop using BB Desk Top 7.1 does not sync. 2.5 hours wasted.
any other suggestions.?
BB 9900 7.0 bundle 2406
carrier; Telus
desktop version 7.1.0.37

I have just learned that that error message is generated by an appointment in your BlackBerry Calendar with a recurring start date prior to 01/01/1900. So, either delete all BlackBerry Calendar items and resync or find the one entry that has a date before 1900.

How to get rid of sync error message

Hello,
When I first installed CC on my computer, our company's proxy was refusing the connections to the Adobe cloud servers and I couldn't sync my test file "test.indd".
From that moment I'm getting the "unable to sync "test.indd" due to server error" message.
After having determinated all the server ips that Adobe uses in the Amazon cloud and added manually the exeptions to our proxy server, syncing files finally worked. Great thanks to Adobe for not giving the server ips out and not helping at all.
Syncing files now works but I keep receiving the "unable to sync "test.indd" due to server error" message.
I have tried to recreate the file with the exact filename and sync it again but that doesn't solve my problem.
As a paying customer (7 x CC for teams licences) I contacted the Adobe support and they told me that they don't do any support for server problems !???!!!!! and redirected me to this forum page http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html which has nothing to do with my problem. Can't find any words to describe that customer support...
Maybe there is someone in this community willing to do the job of Adobe support and help me?

Thanks for your reply Mylenium,
Sorry I forgot to mention my system: Windows 7 Pro 64Bit SP1.
In C:\users\You\AppData\Roaming I find many cache related files, but only a few that are not related to any specific CC app:
C:\Users\***\AppData\Roaming\Adobe\CEPServiceManager4\cache\ExtensionManifest
C:\Users\***\AppData\Roaming\Adobe\Common\Media Cache
C:\Users\***\AppData\Roaming\Adobe\Common\Media Cache Files
I have backuped those files, removed from their respective folders and restarted the CC Desktop app but the message is still popping up.
Does anyone know in which file(s) the sync cache is stored exactly? I can't find any information about that on the net nor forum.

HT4436 I GET A SYNC ERROR MESSAGE WITH OUTLOOK

I CAN NOT SYNC WITH MY OUTLOOK INSTALLED IN MY LAPTOP RUNNING WINDOWS 7 I GET THE FOLLOWING MESSAGE:
Task 'Synchronizing subscribed folders for *********.' reported error (0x800CCC0E) : 'Outlook cannot synchronize subscribed folders for***********. Error: Cannot connect to the server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).'
ANY SOLUTIONS?
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
(For anyone trying to answer this question - the email was an @me.com one so he does have an iCloud account, provided he migrated from MobileMe)

After iOS update, my iTunes no longer sync 'ERROR MESSAGE'

After the new iOS update on my phone, my iTunes on my MAC will not sync. The error message I receive says I need to update iTunes, but it's already updated to the last version and there are no updates available when I go thru the iTunes menu. HELP!

Apple fans. Don't fret. I struggled with this since Saturday when I got my new phone. im pretty tech savvy with a background in computers and I'm a mechanic by trade so i generally know how things work and figure out anything. After trying everything you all have probaby tried as well I did some comparisons to my wife's phone. I paid all three of our cars to her phone easily. One is a Honda hand free link, the other a Hyundai sonata system and the last a pioneer aftermarket Bluetooth with streaming,avrcp etc. after her iPhone 6 128gb connected and worked flawlessly, I narrowed the problem down to my phone specifically. It's not the phone, it's not the ios8, it's not your car. It's your settings. All I did was reset network settings and bam. Problem fixed. You see I messeed with a bunch of stuff in the beginning trying to avoI'd data overage and must have turned something off by mistake. Another theroy I have is my iPhone 5 setting were copied over in the process of migration and they were maybe incompatible with the iPhone 6 itself. Either way post back and let me know if this helps

Getting error message while strating managed server in weblogic console.

Hi,
Here are my config steps I followed:
1. Created Domain with the Admin server port 8001.
2. Able to log into the Admin console successfully.
3. Created Machine in the console
4. Created Managed server ms01.
5. Created Network Channels under ms01 for http and https with different ports.
6. Started node manager
7. Started ms01 and status shows RUNNING.
8. Deployed one sample war file on this ms01. Deployment was successful.
9. Tried to access the application which is deployed, white page is displayed. But same app I was able to access before, so its clear nothing wrong in war file.
10. I rebooted wls after this and tried restarting managed server, but stuck at this point because of below error.
At this point I could see error message in the wls log.
like:
<Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Connection refused: connect. Could not connect to NodeManager. Check that it is running at localhost:5,556.".>
<Error> <NodeManager> <BEA-300033> <Could not execute command "getNMLog" on the node manager. Reason: "Connection refused: connect. Could not connect to NodeManager. Check that it is running at sdc78197svod.corp.siebel.com:5,556.".>
I tried rebooting wls, did not work out.
Any help on this appreciated.
Thanks

Is the node manager running at sdc78197svod.corp.siebel.com:5,556 ? YOu can do a telnet to this IP, port to confirm.

Voice memo won't sync - error message

I have an iPhone 5 and the latest version of iTunes on my computer. I have the setting on 'sync manually'. The first time I clicked sync to transfer a voice memo to my computer an error message came up and it didn't transfer. Now when I click again it's as if iTunes already thinks it has copied the voice memo over but it isnt there. Any ideas? I need this file on my computer urgently.

Hi Catherineduffy!
I have an article here that I believe will help you get this file onto your computer:
iPod: Recording voice memos
http://support.apple.com/kb/ht2396
Specifically, I think these instructions at the bottom of the article will be most relevant for you:
Transferring a recording to a computer
Manually
Voice memos are saved in a Recordings folder on iPod in the WAV file format. If you enable iPod for disk use, you can drag voice memos from the folder to copy them.
Synchronize
If iPod is set to update songs automatically and you record voice memos, the voice memos are automatically downloaded to a playlist in iTunes when you connect iPod. Once downloaded, the voice memos are removed from the Voice Memos folder on your iPod. To play the voice memos that have been synchronized to your computer in iTunes, select the Voice Memos playlist on the left side of the iTunes window. To play the synchronized voice memos on the iPod, select the Voice Memos playlist in the Music menu, not the Voice Memos menu in the Extras menu.
So that file will sync automatically to your computer with automatic sync selected. You may want to try automatic syncing to get the file from your phone onto your computer if that file is still on your phone. Thanks for coming to the Apple Support Communities!
Regards,
Braden

Sync Error message reprocessing in MI server

Similar Messages

Maybe you are looking for