Syncable and Non-syncable table

hi,
anyone plz explain me what is syncable and non-syncable table??????

Well, you can have a sync that is bi-directional... syncing down to the device, while the server is receiving uploads from the client. Then you can have a data collection queue, which is basically upload only. Then last is having a read-only publication item (table) where the sync is only a download from the server, no upload.

Similar Messages

S_TABU_DIS and non-classified tables (&NC&)

Does anyone have any insight into providing display access to non-classified tables (&NC&) via authorization object S_TABU_DIS. Our specific issue at this point is via SE16 with display only access. Our testing has shown that tables without any authorzation group assigned required a value of (&NC&) in field DICBERCLS in order to make SE16 work. The challenge is that we have a number of custom tables without any authorization group which means we need to provide &NC&. If we do this the users automatically get access all the non-classified tables.

>
Ed Marks wrote:
> Does anyone have any insight into providing display access to non-classified tables (&NC&) via authorization object S_TABU_DIS. Our specific issue at this point is via SE16 with display only access. Our testing has shown that tables without any authorzation group assigned required a value of (&NC&) in field DICBERCLS in order to make SE16 work. The challenge is that we have a number of custom tables without any authorization group which means we need to provide &NC&. If we do this the users automatically get access all the non-classified tables.
If there is an intention / requirement to display a table, then the best practice way is to create a view in SM30, assign an auth group to the table via SE54, and then create a transaction in SE93 to call that view. Or search for an existing one.
There are parameter transactions; basically the same thing as SM30.... except the users dont know that. You can also add your own additional checks on other auth objects.
''&NC&' means "not classified" as there is no requirement to control the access for the data browser transactions, because there is no intention that a user should display or change them in your concept.
Cheers,
Julius

Can one logical table had bothfragmented and non-fragmented table sources?

Hi,
I created one logical table with three logical table sources as explained below.
1. Inventory Item logical table source with fragmentation clause of ITEM_TYPE='INVENTORY', I checked source combination feature for this LTS.
1. Punch out logical table source with fragmentation clause of ITEM_TYPE='PUNCHOUT', I checked source combination feature for this LTS.
3. Category logical table source without any fragmentation.
The relation between category and item is one to many.
I am getting errors in answers if i try to query all attributes of item for a category in dimension only query.Could somebody validate whether i can create one Logical table with fragmeted as well as non-fragmented logical table sources or not?

Can you share the error messages you are getting?
regards
John
http://obiee101.blogspot.com

Gathering statistics on partitioned and non-partitioned tables

Hi all,
My DB is 11.1
I find that gathering statistics on partitioned tables are really slow.
TABLE_NAME                       NUM_ROWS     BLOCKS SAMPLE_SIZE LAST_ANALYZED PARTITIONED COMPRESSION
O_FCT_BP1                        112123170     843140    11212317 8/30/2011 3:5            NO                    DISABLED
LEON_123456                      112096060     521984    11209606 8/30/2011 4:2           NO                   ENABLED
O_FCT                           115170000     486556      115170 8/29/2011 6:3            YES
SQL> SELECT COUNT(*) FROM user_tab_subpartitions
2 WHERE table_name =O_FCT'
3 ;
COUNT(*)
       112I used the following script:
BEGIN
DBMS_STATS.GATHER_TABLE_STATS(ownname          => user,
                                tabname          => O_FCT',
                                method_opt       => 'for all columns size auto',
                                degree           => 4,
                                estimate_percent =>10,
                                granularity      => 'ALL',
                                cascade          => false);
END;
/It costs 2 mins for the first two tables to gather the statistics respectively, but more than 10 mins for the partitioned table.
The time of collecting statistics accounts for a large part of total batch time.
And most jobs of the batch are full load in which case all partitions and subpartitions will be affected and we can't just gather specified partitions.
Does anyone have some experiences on this subject? Thank you very much.
Best regards,
Leon
Edited by: user12064076 on Aug 30, 2011 1:45 AM

Hi Leon
Why don't you gather stats at partition level? If your partitions data is not going to change after a day (date range partition for ex), you can simply do at partition level
GRANULARITY=>'PARTITION' for partition level and
GRANULARITY=>'SUBPARTITION' for subpartition level
You are gathering global stats every time which you may not require.
Edited by: user12035575 on 30-Aug-2011 01:50

Order by on Non-base table Item

Hi,
I have a base table block on Dept and some of the non-base table items(which are emp table and being populated through post-query).
So, i have some base table items and non-base table items on the same block.
No my problem is, i have to do ORDER BY on one of non-base table items..
How can i do this ?
Thanks in advance.

The obvious answer is to create a view upon which to base the block, or alternatively you could use a FROM Clause Query so that you don't have to set the values in your POST-QUERY trigger.
Richard

Key fields and non-key field of condition table

Hello Gurus,
what is key fields and non-key field of condition table?
thanks very much!

Key field
Each condition table contains keys that can be used for creating dependent condition records.
for example let take condition type PR00.
PR00 uses access sequence PR02 .
Access sequence PR02 has following tables associated with it namely 304, 305 & 306
When you create a conditon record for PR00 with transaction VK11 or VK31, you have a button 'key combination' which is nothing but fields associated with tables 304, 305 & 306.
In brief, Condition records are always created using specific keys. Condition tables are used to define the structure of the keys of a condition record.
Non key field
For example take condition table 144 - sales deal basic data.
Table 144 is associated with access sequence PBUD.
If you check the fields associated with this table (click technical view button), there are three fields at bottom which do not have 'key' check mark -KDATU, PLTYP, KSTAF
So, when you create a condition record for PBUD, system does not propose these 3 fields in 'key combination' and hence are non key fields.
Please reward points for good answers as this would help increase the total donation that SAP will make to the United Nations World Food Programme.

Table for Purchase Order and Non Purchase order history

Hi,
Could you please share me the table name for getting the Purchase order history and Non purchase order history because this is a client requirent.
I have gone through this tables but not getting exact data i.e. EKPO,EKKO,EKNE...
please share with me the exact Table name to get all the Purchase order history and not purchase order history..
Thanks in advance

Hi Mallikarjun,
Where did you find the non po info?
Thanks,
Neha

What is the meaning of "PSEUDO" and "NONE" in v$session table.

Hi
What is the meaning of "PSEUDO" and "NONE" in v$session table.
V$SESSION:
SERVER VARCHAR2(9) Server type (DEDICATED| SHARED| PSEUDO| NONE)
thanks
siva

PSEUDO is the server column's value of killed sessions, until they are cleaned up by PMON.
A dedicated server session will always have DEDICATED as server value, while a shared server session has SHARED when it's active, and NONE when it's inactive.

Internal table with Dynamic and Non dynamic fileds

Hi Experts,
How to get the internal table with Dynamic and Non-Dynamic Fields.
Could u please help me.
Thanks,
Varun

Hi,
Execute the below sample code or analyze it there is appropriate description provided.
*& Report ZTEST_PRM_DYN_ALV
REPORT ZTEST_PRM_DYN_ALV.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
*build the dynamic internal table
perform build_dyn_itab.
*write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
*call the alv grid.
perform call_alv.
*Build_dyn_itab
form build_dyn_itab.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
*Create fields .
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'name1'.
wa_it_fldcat-datatype = 'mara-matnr'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
*clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
do p_flds times.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
enddo.
*Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
*Form build_report
form build_report.
data: fieldname(20) type c.
data: fieldvalue(5) type c.
data: index(3) type c.
field-symbols: <fs1>.
do p_flds times.
index = sy-index.
*Set up fieldvalue
concatenate 'FLD' index into
fieldvalue.
condense fieldvalue no-gaps.
assign component index of structure <dyn_wa> to <fs1>.
<fs1> = fieldvalue.
enddo.
*Append to the dynamic internal table
append <dyn_wa> to <dyn_table>.
endform.
*CALL_ALV
form call_alv.
data: wa_cat like line of alv_fldcat.
*clear wa_cat.
wa_cat-fieldname = 'matnr'.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '10'.
append wa_cat to alv_fldcat.
do p_flds times.
clear wa_cat.
wa_cat-fieldname = sy-index.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '6'.
append wa_cat to alv_fldcat.
enddo.
*Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = alv_fldcat
tables
t_outtab = <dyn_table>.
endform.
Hope this will help, reward if found usefull.
Cheers,
Ram.

Does table MCHB (batch stocks) contain both valuated and non valuated stock

Hello
Does table MCHB (batch stocks) contain both valuated and non valuated stock?
Is it possible that material has both valuated and non valuated stock for the same plant and storage location?
Thanks

Hi ,
Most of your queries has been answered by Jurgen.
1)Does valuated or non valuated is linked with valuation type? yes ..if the material is valuated then only there is valuation type.It is used for split valuation .
2)Where can I see whether material is valuated on plant or not?
to check the valuation level IMG >Enterprise Structure>Definition>Logistics - General>Define valuation level
and to check value and quantity updation at plant level check
IMG >Logistics - General>Material Master>Basic Settings>Material Types-->Define Attributes of Material Types
3)Case1
I want material A to be valuated at the plant without split valuation
Case
I want material B to have 0 value at plant
go as Jurgen has recommanded in the previous post . for material B used different material type which is not valuated at that plant .
Regards,
Anupam

Problem with parameters and non table based items

Hi,
I have a situation where I have some not table based items on a page (shuttles and select lists). It is parameters that the end user inputs. I have another page with the same items just here they are Display Only and also not table based. When the user press a button I branch from page 1 to page 2 and set the items on page 2. My problem is that the input the user keys in are not copied to the items on page 2. I can see the data in the session state.
I assume that this is a silly question and I have just set Source Used or Source Type wrong one one of the items but I can not get it working. Can anybody help?
It works fine if I use a Application Item and creates a process on page 1 where I copy the item value from the session state but that should be needed right?
Regards Pete

Thanks Scott,
I think I got it working. If I remove all the colons from the data it works. I select several entries in a Shuttle and the result is a colon delimited string of values. If I remove these in a process it works fine. Is there a way of escaping the output from a Shuttle?
Regards Pete

Report for Excisable and Non Excisable vendor

Hello
Is there any Std report is there....it can give us the list of Excisable and Non excisable Vendors based on the Perticular Purchase Orgnisation.
Regards
sapman man

Hi
I do not think in SAP this kind of report is available.
what you can do , if your vendor master has different accounting group for Excisable and Non excisable vendor then you can check in standard table of vendor master like LFA1 and LFM1 or create Z report or Query.
Awaiting your feedback.
Kishor Rudani

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

Update Excise base value in MRP based and Non-MRP based billing

Hi Gurus,
We need to update Excise Base Value for Statistical Condition type. How to configure the same ?
Sl.No Pricing Condition Type      Active   Statistical           Passed to Accounting
1        MRP Price (Statistical)
2        Abatement (Statistical)
3       Surcharge (Active&Passed to Accounting)
4      Assessabel value (Statistical)
(No:4 This is the base for calculating Excise duties i.e Excise Base Value)
5       List Price (Statistical)
6       Customer Discount(Statistical)
7      Surcharge(Active&Passed to Accounting)
8      Net Price (Active&Passed to Accounting)
9      BED   (Active&Passed to Accounting)
10    ECess (Active&Passed to Accounting)
11   SECess (Active&Passed to Accounting)
12   Total collected from Customer(Statistical)
Issue: When there is MRP Price higher than the List Price, then the Cutomer will be charged on the basis of Net Price only, but the duties amount to be paid to the government on MRP Price. so in this case I can not calculate Excise Duties on the Actual Net Price condition which is active and passed on to accounting. And always the Excise duties to be calculated on Assessable value(no:4). But that condition type if I make activate then it will pass to accounting and also getting added to the Net Value(KOMP-NETWR). How to come out of this situation.(as per the customer requirement both MRP based materials and non-MRP based materials are also considered in the same sale order i.e with the same pricing procedure).
Becasue of this EXBAS is not getting updated in the J_1IEXCDTL.
Gurus, Share your valuable experiences and suggestions.
Thanks &Regards
Sreekanth
09611147585

Dear Lakshmipathi,
As per your suggestion, I have maintained Material Assessable Value and then also the duty values are calculating on the basis of Assessable value maintained in the Pricing Procedure. It is not taking the Material Assessable Value into consideration. And it is not getting updated the Excise Base Value.
In which case Material Assessable value will be taken into consideration?
How to update the Excise Base Value in J_1IEXCDTL tables?
Thanks&Regards
Sreekanth

Retrieving spatial and non spatial data in one query

Hello. I am having slight difficulties using JDBC to retrieve both spatial and non spatial data in the same query. The following is code from a sample program of mine that retrives spatial data from spatial tables.
(In spatialquery geom is a geometry column and city is simply the name of the city):
try
Geometry geom = null;
String database = "jdbc:oracle:thin:@" + m_host + ":" + m_port + ":" + m_sid;
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = (OracleConnection)DriverManager.getConnection(database, sUsername, sPassword);
GeometryAdapter sdoAdapter =
OraSpatialManager.getGeometryAdapter("SDO", "8.1.7", STRUCT.class, null, null, con);
String spatialquery = "SELECT a1.geom, a1.city \n" +
"FROM cities a1";
Statement stmt = con.createStatement();
OracleResultSet rs = (OracleResultSet) stmt.executeQuery(spatialquery);
int i = 0;
int noOfFeatures = 2;
while (rs.next())
for(i = 1; i <= noOfFeatures; i++)
STRUCT dbObject = (STRUCT)rs.getObject(i);
try
geom = sdoAdapter.importGeometry(dbObject);
catch(GeometryInputTypeNotSupportedException e)
System.out.println("Input Type not supported");
catch(InvalidGeometryException e)
System.out.println("Invalid geometry");
System.out.println(geom);
}//end while loop
This retrieves the sptial data fine, however when I attempt to retreive the non-spatial data I keep getting a "ClassCastException" error. I understand it is something to do with "STRUCT dbObject = (STRUCT)rs.getObject(i);" line. Can anyone tell me how to retrieve both spatial and non-spatial data in the one query using JDBC. I have tried nearly everything at this stage. Cheers joe

Theresa A Radke
Posts: 20
OTN Member Since: Jul, 2001
retrieving spatial and non spatial in same query. May 23, 2003 12:02 AM
retrieving spatial and non spatial in same query.

Syncable and Non-syncable table

Similar Messages

Maybe you are looking for