Synch problems after upgrade from Office 2010 Beta

I updated from the beta version of Office 2010 to the pro version. Now I can not synch my calendar. I get the message "no supported calendar application can be found" on the info page of my device in Itunes (seems it can not find Outlook 2010), even though it did find my contacts in Outlook and continues to synch those without a problem. it appears others have had some version of this problem. I followed the steps outlined to delete all the itunes and related programs in a specific order and then reinstall, no joy. any body have a clue what I should chase next?

Hi Daniel,
What OAT tool are you using? Is it the Office Customization Tool?
Where did you get the "Do not create new ost file during Migration" option in the tool? As far as I know, OST file cannot be migrated. If you were able to use the old OST file, Outlook will prompt that it
doesn't match the server mailbox.
The ForceOSTPath applies only to new profile, it can't be used to force Outlook to use the old OST file.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • Problem after upgrading from Office 2000 to Office 2003

    All:
    Using Excel 2000 under Windows XP, ORACLE 8.01 ODBC driver, and ORACLE 8.1.7.4 database on an RS6000, data retrievals work fine.
    Some users are testing PCs upgraded to Office 2003. Using same ORACLE ODBC driver and database, some columns of Excel spreadsheet now are in English and others in a different character set (basically garbage). Again, some are fine, some are not.
    Thoughts/Ideas/Opinions??
    Thank you in advance.
    Mike
    Standish Mellon Asset Management

    What version of the Oracle ODBC driver are you using? 8.01 is not a driver version-- it should be something like 8.1.7.x.y (assuming you're using one of the 8.1.7 Oracle ODBC drivers).
    Since Oracle desupported the 8.1.7 database almost a year ago, do you have the option of upgrading the Oracle client to a supported release (probably 9.2 in your case)?
    Unfortunately, I don't know what your particular problem is, but I have certainly seen problems mixing the latest and greatest versions of applications with older versions of the Oracle client.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Upgrading from Office 2010 to 365

    Upgrading from Office 2010 Pro to 365 Pro Plus - I know you must uninstall 2010 and install 365 or can run them concurrently. Question is - if you uninstall 2010 and install 365, what settings are lost and what settings are retained? Outlook signatures?  Word
    and Excel settings and preferences? 
    Also must the OST files be re-downloaded again?  I hear there's a 40% compression improvement so this might be ideal, just want to know if the GPO to not re-download the OSTs actually works in this scenario?

    Hi,
    Uninstall Office 2010 will not remove any user settings, the user settings will migrate upon the first use of each Office 2013 application.
    By default, when Outlook 2013 is installed, a new compressed version of the Outlook data file (.ost) is created. This new compressed version of the .ost is up to 40% smaller than the size of the .ost files that were created in earlier versions of Outlook.
    So it is recommended to use the new .ost file.
    The "Do not create new OST file on upgrade" policy also works for Outlook 2013, however you might need to download the new Outlook Group Policy template (Outlk15.admx). Outlook 2010 template should not work in this scenario.
    Regards,
    A.B.

  • Can I sync my iCloud calendar with Outlook 365?  I upgraded from Office 2010 and now it doesn't sync.

    I upgraded from Outlook 2010, and now it doesn't update in Outlook 365.  Thinking I can't do it, and it's a pity, cause I want it all to integrate on phone and on desktop.  I'm running Windows 7 and Office 365.  The iCloud app works fine with Internet Explorer, but I can't get the calendar to update.  Any suggestions?

    Can't I just set up Exchange as one of my calendars in ical?
    Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
    Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
    No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
    What is the best work around for this?
    None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
    I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

  • Problems after upgrading from 10.2.3 to 10.2.8

    After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.

    Hello rick,
    First of all, welcome to the Apple discussions.
    * How did you upgrade the OSX 10.2.3??
    * Did you use the combo update?
    * Did you run the dick repair permissions before an after
    Here is the Combo Update for OSX 10.x
    Combo Update
    An here is how you use the disc repair permissions
    About Disck Repair Permissions
    Applications Quits
    Let me know if so ...
    Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
    Dimaxum <]:~))

  • On Upgrade (from Office 2010) don't create new .ost file

    Hi there, hope someone can help me.
    Here is my Problem:
    I'm runninng Office 2010 (32Bit Version) on Windows 7 Enterprise x64. I've started Office 2010 with Exchange CacheMode activated. The ost-file is located under D:\Data\outlook\%username%
    Now I'm testing Migration to Outlook 2013.
    I'm using OAT to do the following things (regarding only Outlook):
    - Uninstall of Office 2010
    - Install of Office 2013 with using old settings
    -Features:  Configuring "Do not create new ost file during Migration" (we have many subsidiaries with low performance connections - so the old ost should be used after migration)
    Outlook-Profile: Tried all 3 methods (use existing profile | change profile | new Profile)
    At all my tests Outlook creates a new .ost-file under standard directory and don't use  the existing ost-file under D:\Data\%Username%
    After These tests i tried it with gpo "donotcreatenewostonupgrade" - But in this case also a new ost is created.
    In all cases i have 2 Outlook profiles: "Outlook" (with new ost) and "Backup of Outlook" (with old ost)
    By Setting ForceOSTPath to D:\Data\outlook\%username"
    and Donotcreatnewostonupgrade to 1
    i get two .ost's under D:\Data\outlook\%username" - "outlook.ost" and "Outlook data file.ost"and two mailprofiles "BACKUP OF Outlook" and "Outlook"
    So ForceOSTPath is getting used, but Donotcreatnewostonupgrade not *confusing*
    Can someone cann tell me a solution for this problem?
    Best regards
    Daniel
    Best regards
    Daniel

    Hi Daniel,
    What OAT tool are you using? Is it the Office Customization Tool?
    Where did you get the "Do not create new ost file during Migration" option in the tool? As far as I know, OST file cannot be migrated. If you were able to use the old OST file, Outlook will prompt that it
    doesn't match the server mailbox.
    The ForceOSTPath applies only to new profile, it can't be used to force Outlook to use the old OST file.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • DPM 2012 Cannot modify or create protection groups after upgrading from DPM 2010

    Hi,
    We have recently upgraded from DPM 2010 to 2012.  Since the upgrade we have been unable to create new protection groups or add new datasources to an existing group.  Existing backups are running without errors. 
    We have tried checking the DPM sql user account permissions as described in
    this article but with no luck.  More searching has not provided any other relavent fixes.  We are now stuck on how to troubleshoot this any further.
    In the DPM console we get the following error adding a VM to an existing protection group:
    Modify protection group: Virtual Machines failed:
    Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
    Error details: VssError:Shadow copying the specified volume is not supported.
     (0x8004230C)
    Recommended action: Retry the operation.
    Allocate Replica For \Backup Using Saved State\Cacti failed:
    Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
    Error details: VssError:Shadow copying the specified volume is not supported.
     (0x8004230C)
    Recommended action: Retry the operation.
    In the event log we see:
    The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 1 Schedules removed: 1 Schedules updated: 0.  
    Problem Details:
    <ConsistencyCheck><__System><ID>26</ID><Seq>1534</Seq><TimeCreated>23/04/2012 09:33:29</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
    /></Tags></ConsistencyCheck>
    the message resource is present but the message is not found in the string/message table
    Thanks in advance for any advice.

    Hi,
    The error 0x8004230C VSS_E_VOLUME_NOT_SUPPORTED: Shadow copying the specified volume is not supported, can only come when trying to enable shadow copies on new volumes created when trying to add new datasources to protection.   Generally speaking
    Only NTFS volumes greater that 1GB with a minimum of 300MB free space can be shadow copied, so something is going wrong with the volume creation / format process.  Please investigate that, see if two new volumes get created when protecting a new data
    source, and the sizes are greated that 1GB and also verify it's formatted NTFS.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

    Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
    We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
    Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Technical Support Details:
    System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    as well as:
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
    Reason: The object you are trying to create already exists. Try again using a different name.  
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.  
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
    Search Administration page, the "System Status" shows the following message:
    The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
    try again
    Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
    running.
    Does anyone know how I can resolve this problem? 
    Thanks!

    Hi Joaquin,
    According to your description, the error occurred when you re-created the Search Service Application.
    Based on the error message, I recommend to verify the things below:
       1. Check if the association between the Search Service Application proxy and the web application is configured.
    Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
       2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
    Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
    the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
        3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
    job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • AUTO_RUNSTATS: problems after upgrade from 8.2 to 9.5

    Hello guys,
    We're appreciating a problem in our recentley upgraded databases 9.5
    We've upgraded from release 8.2 and we have activated the following parameters:
    db2 UPDATE DB CONFIG USING AUTO_MAINT ON AUTO_TBL_MAINT ON AUTO_RUNSTATS ON
    Although we don't see auto_runstats running in database. How can I activate this issue? Isn't it enough to activate these parameters?
    regards,
    Filipe

    Hello Filipe,
    have a look at your dump directory, under events you find file like db2optstats(n).log
    db2 runstats on table DB2DDP.STMTS
    DB20000I  The RUNSTATS command completed successfully.
    2010-07-22-14.45.36.597065+120 E937346A585        LEVEL: Event
    PID     : 463098               TID  : 16547       PROC : db2sysc 0
    INSTANCE: db2ddp               NODE : 000         DB   : DDP
    APPHDL  : 0-38427              APPID: *LOCAL.db2ddp.100722124520
    AUTHID  : DB2DDP
    EDUID   : 16547                EDUNAME: db2agent (DDP) 0
    FUNCTION: DB2 UDB, relation data serv, sqlrLocalRunstats, probe:10
    COLLECT : TABLE AND INDEX STATS : Object name with schema : AT "2010-07-22-14.45.36.596771" : BY "User" : start
    OBJECT  : Object name with schema, 14 bytes
    DB2DDP  .STMTS
    IMPACT  : None
    2010-07-22-14.45.36.744115+120 E937932A665        LEVEL: Event
    PID     : 463098               TID  : 16547       PROC : db2sysc 0
    INSTANCE: db2ddp               NODE : 000         DB   : DDP
    APPHDL  : 0-38427              APPID: *LOCAL.db2ddp.100722124520
    AUTHID  : DB2DDP
    EDUID   : 16547                EDUNAME: db2agent (DDP) 0
    FUNCTION: DB2 UDB, relation data serv, sqlrLocalRunstats, probe:220
    COLLECT : TABLE AND INDEX STATS : Object name with schema : AT "2010-07-22-14.45.36.743863" : BY "User" : success
    OBJECT  : Object name with schema, 14 bytes
    DB2DDP  .STMTS
    IMPACT  : None
    DATA #1 : String, 49 bytes
    RUNSTATS ON TABLE "DB2DDP"."STMTS" ON ALL COLUMNS
    this is a manual runstats, you will also a ot of fabricated runstats.
    Here is an output from db2 get db cfg for <SID>:
    Automatic maintenance                      (AUTO_MAINT) = ON
       Automatic database backup            (AUTO_DB_BACKUP) = OFF
       Automatic table maintenance          (AUTO_TBL_MAINT) = ON
         Automatic runstats                  (AUTO_RUNSTATS) = ON
           Automatic statement statistics  (AUTO_STMT_STATS) = ON
         Automatic statistics profiling    (AUTO_STATS_PROF) = OFF
           Automatic profile updates         (AUTO_PROF_UPD) = OFF
         Automatic reorganization               (AUTO_REORG) = OFF
    Best regards,
    Joachim

  • Perfomance problem after upgrade from 9.2.0.6 to 9.2.0.8

    Hi,
    we have upgrade our RDBMS from 9.2.0.6 to 9.2.0.8, all our batch jobs became slow (plus 3hours on normal execution time of our query).
    any suggestions.
    Regards.
    tt

    I bet you just upgraded without any modification on parameters and/or way of gathering statistics. :)
    I know it's very embrassing and frustrating that Oracle sometimes gets slow after just upgrade.
    But it's designed to be that. Not to get slower, but to get faster.
    Enhancement is the only purpose of upgrade, isn't it?
    But there is always a chance that you hit some negative side effects of that enhancement.
    For instance, optimizer gets equipped with new powerful query transformation algorithm.
    But in very rare cases, it causes some queries got slower.
    It has always been happening and l believe it will also happen with 11g. :(
    The unfortuante thing is that there can be amazingly many reasons why Oracle gets slower after upgrade.
    You need to search metalink for similiar issues and check statistics and execution plans as stated above.

  • Problem after upgrade from patch level 36 to 43

    Hi,
      Recently our system is upgraded from 36 to 43 patch level. After this there are problem in doing hiring action, IT0000 is saving but the next infotype IT0001 does not gets saved and also no error message. So, really not able to figure out what could be the problem.
    I was debugging the standard code i.e once the 'save' button is clicked in IT0001 in PA40, but in vain. I am not able to find out where or in which program/include the data gets saved in PA0001. If any one aware of this please let me know.
    Since IT0001 is not getting saved, there are probs with IT0007 and IT0008.
    Please let me know your views.
    Thanks,
    Arunsri

    Hi Raju,
      Thanks for the reply. Ya, the problem was not due to upgrade,but some other issue. Not able to find till now. I checked IGMOD features and it is in 'Active' mode only. No luck.
    Edited by: Arunsri on Jan 27, 2012 4:18 PM

  • Mail flow problem after upgrade from cu1 to sp1

    I have update Exchange server 2013 CU1 to SP1 (CAS Role). After upgrade mail cannot flow. all the mail are stuck.
    CAS server use to mail flow outside and receive from outside. but The problem is this CAS server mail flow not work after upgrade exchange server 2013 CU1 to SP1.
    Please give suggest.
    Thanks

    I didn't connect to queue viewer as because the version of exchange 2013 server are different. in the environment two CAS server and two Mailbox server. i just update one CAS server into SP1. and another CAS in CU3. Mailbox 01 is CU3 and Mailbox 02 is CU
    1. So their is version difference in the environment.
    So, when i update CAS server to SP1. That server is not working for mail flow.
    Please suggest.

  • Problems after upgrade from SCVMM 2012 Sp1 to SCVMM 2012 R2

    I did a in-place (uninstall VMM2012 Sp1, retain the database, and install VMM2012 R2 point to old database) upgrade. All the steps work fine.
    The only problem (so far) is that when I create a new VM using a custom template (for example, Windows 2008 R2), the deploy fail with the following error:
    Error (2912)
    An internal error has occurred trying to contact the vm-scvmm2012.domain.com server: NO_PARAM: NO_PARAM.
    WinRM: URL: [http://vm-scvmm2012.domain.com:5985], Verb: [INVOKE], Method: [GetError], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsClientJob?JobId={56B8E488-5DB9-4CC1-BEFA-AFF76E1E4D2D}]
    Unknown error (0x80072f0d)
    Recommended Action
    Check that WS-Management service is installed and running on server vm-scvmm2012.domain.com. For more information use the command "winrm helpmsg hresult". If vm-scvmm2012.domain.com is a host/library/update server or a PXE server role then ensure
    that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
    Information (26278)
    VMM could not offload transfer the file \\vm-scvmm2012.domain.com\MSSCVMMLibrary\VHDs\Template_Windows_2008_R2_SP1.vhdx to C:\ClusterStorage\Volume1\VM-NEWVM\Template_Windows_2008_R2_SP1.vhdx.
    Any ideas?

    I have a similar problem when migrating VMs from Windows 2008 R2 (Non Clustered) Hyper-V to Windows 2012 Hyper Cluster. I had previously migrated about 100 VMs like this with no problem. It appears since upgrading from VMM SP1 Rollup 4 to Rollup 5 this problem
    is happening. All Agents are up to date.
    I can migrate VMs in the cluster no problem.
    I removed the Windows 2008 R2 Hyper-V host and added it back which allowed the job to at least start but when it gets to the final steps of importing the VM it fails with the same error and references the VMM server.
    Others suggest this is a VMM Certificate problem and you can remove the Cluster node and add it back again but I can't do that in a production Cluster with hundreds of VMs. That is not an acceptable solution.
    How can we fix this?

  • After upgrade from TFS 2010 users cannot view source control

    I recently did a in place of upgrade of TFS 2010 to TFS 2013.   All of my users permissions stayed in tact. The users (contributors) cannot view any of the source control in either in VS 2010 or 2013.  Since I am the administrator I
    see everything and have no issue.   Is there something that did not get brought over in the upgrade?

    Hi Rrenn49, 
    Thanks for your post.
    You upgraded to TFS 2013 Update 4?  There’s no any issue or warning during upgrade process? 
    What’s the detailed message they received when the contributors try to view source control files?
    Please manually check the contributors group’s permissions on your TFS Source Control.
    If you add a new user into your contributors group, this new user can access TFS Source Control correctly?
    If you have any further research of this issue, please share your experience here.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Lync 2013 Client pops up automatically while typing in Word , Excel in Windows 7 after upgrade from Lync 2010 client

    Hello All,
    Facing very much weird issue for only 4 users in my organization. This 4 users are migrated to Lync 2013 pool from Lync 2010 pool with Lync 2010 client migrated to Lync 2013 client.
    Now whenever this users are typing in (apps like word, excel) automatically pops up Lync 2013 client which is annoying.
    All my users are Windows 7 with latest updates & updates Lync 2013 with latest updates installed.
    Any help really appreciated.
    Regards
    Anand S
    Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

    Hi 
    The solution is to do a ‘repair’ install of Office 2013.  This will reregister the needed components and the popups will stop. 
    A repair install can be done from ‘Programs and Features’, highlight Office 2013 and click ‘Change’.  When the install wizard appears, choose the ‘repair’ option.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

Maybe you are looking for