Synchronization: Attributes Not Applied

Hello,
Scenario: I have two Directory services.
The first Directory service is an Active Directory and the other is a OpenLDAP. I’m trying to synchronize the User inclusive they attribute from LDAP
to Active Directory with Forefront Identity Manager 2010 R2. My OpenLDAP is as follows constructed “ou=people,dc=ldap,dc=de”. In the organizational Unit are my Users which I want to synchronize. As Example which attributes my Users have:
“cn=Marcel Leukel;
sn=Leukel;
givenName=Marcel;
uid=mleukel”
My Problem: I didn’t get all attributes in a full synchronization by the step from the Metaverse to the Connector Space from the FIMMA. That attribute
“LastName” is the only one that I can synchronize.  I get the value of the LastName from the LDAP attribute “sn”. If I create a preview after a full synchronization run than are all attributes on “Not Applied”. Only the attribute LastName was Applied. 
Sincere regards,
Marcel Leukel

My attribute flow from LDAPMA is:
Data Source Attribute --- Metaverse Attribute
Object Type: inetOrgPerson --- Object Type: person
uid --- Import ---
accountName
cn ---
Import --- displayName
givenName --- Import --- firstName
sn --- Import --- lastName
The attribute flow from FIMMA is: 
Data Source Attribute --- Metaverse Attribute
Object Type: Person --- Object Type: person
AccountName --- Export --- accountName
DisplayName --- Export --- displayName
FirstName --- Export --- firstName
LastName --- Export --- lastName

Similar Messages

  • MBean Attribute (Does not apply to application modules)

    Can any one tell what this mean ?
    MBean Attribute (Does not apply to application modules) :
    is this means that it wont help for datasources for any J2EE application ????
    Inactive Connection Timeout     
    The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.
    You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.
    When set to 0, the feature is disabled.
    MBean Attribute (Does not apply to application modules) :
    JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds
    Minimum value: 0
    Maximum value: 2147483647

    Yes!, they do not apply for any applications they are management interfaces, internal to weblogic.
    Below is the brief information about it:
    A managed bean (MBean) is a Java bean that provides a Java Management Extensions (JMX) interface. JMX is the J2EE solution for monitoring and managing resources on a network.
    BEA WebLogic Server provides a set of MBeans that you can use to configure, monitor, and manage WebLogic Server resources through JMX. This reference document organizes WebLogic Server MBeans into the following categories:
    MBeanServer Services, which serve as your entry point into navigating the MBean hierarchies. Some of these MBeans contain attributes and operations for managing changes to WebLogic Server configuration MBeans.
    Configuration MBeans, which expose attributes and operations for configuring WebLogic Server resources.
    Runtime MBeans, which provide information about the runtime state of its resources.
    New MBeans, which have been added in the current release of WebLogic Server. These new MBeans are also listed in other categories in this document (for example, new runtime MBeans are also listed under the Runtime MBeans category).
    Deprecated MBeans, which are deprecated in the current release of WebLogic Server.

  • Redo log files are not applying to standby database

    Hi everyone!!
    I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
    My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database.  I run the following command on the standby database.
                SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
    It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
    The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
    1. How to resolve this issue ?
    2.Is it compulsory to have Primary database open ?
    3. I have created standby  control file by using  command
              SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
    So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should  I have different database name for both or existing one is correct ?
    Can anybody help me to come out from this stuck ?
    Thanks & Regards
    Tushar Lapani

    Thank you Girish. It solved  my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
    I did following scenario.
    1.  Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
    2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
    3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
    So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
    Thanks

  • Graph attributes not updating on print VI

    Hi All,
    At my current client's lab they are having problems with printing test result graphs to HTML. They typically have two almost identical VIs with graphs. The first one is the operator's GUI, colored, lots of buttons, etc. This displays properly.  When it comes time to print the test reports they send both data and graph attributes, such as scales, etc, to a simplified version of the graph VI. This second VI has a white background, all the operator's buttons have been removed, a few new summary tables usually get added, then they tell this VI to print it's front panel to HTML.  Been there, done that.
    The finished HTML reports often show that the second, white, VIs sometimes do not have the correct graph scaling. The data looks correct, but the scales are way off.  I have not yet been asked to look at the code, but that is probably coming soon. I have been asked to ask my LabVIEW contacts for general ideas related to this technique.
    Unfortunately the code is on a secure system in a secure lab, so I cannot post an actual VI from the project. I seem to recall seeing similar problems on a project long ago and the solution(s) involved keeping the printing VIs open and the order that data and attributes were applied, etc.
    The code is very very legacy and cannot be replaced at this time & budget, I may be asked for help in finding a quick modification solution. Any thoughts, sequence of steps, things to remember to check, etc are appreciated.

    It's likely a problem with the report VI grabbing the front panel image
    before it has been updated properly by the property nodes.  After
    speaking with some of my colleagues here, we have seen situations where
    if you configure the subvi to open when called,
    programmatically minimize it, and close it when it's finished; the
    subvi will work.  You could also consider enforcing dataflow
    dependencies between the scale updates and the report VI functions,
    possibly introducing a wait function in between to ensure that the
    panel can be updated completely before the image is taken.  Of
    course, without access to code, I can only offer suggestions and
    general information about what has worked in the past.  If you get
    more information, let me know!
    Cheers,
    Matt Pollock
    National Instruments

  • Specified in jnlp jvm argument but not   applied   by browser

    jlnp file specifies passing passing vm arguments   using java-vm-arguments attribute , it also provides list of acceptable arguments  as mentioned here http://docs.oracle.com/javase/7/docs/technotes/guides/javaws/developersguide/syntax.html.
    In my case , jvm argument  is   -Djava.security.debug=sunpkcs11,pkcs11. I added   this to jlnp file but this  is never loded by the browser jvm.  This is not mentioned in the above link so can this argument be passed to an applet?
    here is my jnlp file
    <pre>
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="" href="">
        <information>
            <title>Applet</title>
            <vendor>ARTMS</vendor>
        </information>
        <resources>
            <j2se version="1.7+"  java-vm-args="-Djava.security.debug=sunpkcs11,pkcs11"/>
            <jar href="dsapplet.jar"/>
        </resources>
        <property name="java.security.debug" value="sunpkcs11,pkcs11"/>
        <applet-desc
             name="Applet"
             main-class="com.service.TestApplet"
             width="900"
             height="300">
                 <param name="java_arguments" value="-Djava.security.debug=sunpkcs11,pkcs11"/>
         </applet-desc>
      <security>
      <all-permissions/>
      </security>
         <update check="background"/>
    </jnlp>
    </pre>

    I tried with java web start still the jvm argument is not applied , please advice can this argument  -Djava.security.debug=sunpkcs11,pkcs11    be applied to java web start ?

  • Changed column order not applied to interactive report

    Hi,
    I've changed column order for interactive report.
    But it is not applied.
    How can I solve this issue?
    Thanks,
    Guy

    Hi Guy
    It depends on where you have changed the column order. If you change the column order using the 'Select Columns' function when you click on the 'Wheel of Magic', then it should work.
    If you are changing the column order from the Interactive Reports Attributes page then this will only affect the column order for non displayed items and the single row view.
    I hope that helps
    Shunt

  • Email Address Policy (EAP) - "Do Not Apply" characteristics

    I'll be updating an existing email address policy and to manage the impact of making this change i will be selecting "Do Not Apply" on the scheduling page.   I understand that this configuration will enable the updated policy
    to be applied to newly created recipients and existing recipients that have one or more attributes changed.   I have been searching the web but have been unable to identity what attribute change(s) would result in the reasssessment of a recipients'
    email address policy.   Can you direct me to some microsoft documentation which identifies what exactly triggers this reassessment for an individual recipient?

    Albert your post is very helpful.  After reading your post and both articles a few things are clarified...
    1.  EAP is reapplied if either Exchange Management Shell or Exchange Management Console are used to initiate a change to recipient(s).  (From Blog)
    2.  When an email address policy is modified and saved, all associated recipients are updated with the change.  (From Technet)
    With this information the following should be true when an EAP is updated and "Do Not Apply" is selected.
    An existing recipient will not have their EAP reevaluated unless EMC or EMS is used to update that recipient, or if an administrator manually forces a reevaluation for all users.
    New recipients will evaluate EAPs and have the appropriate EAP applied during provisioning.
    Modifying attributes using tools other than the two mentioned above will not trigger an reevaluation and subsequent association of a policy with a recipient.
    Using EMS and EMC to modify recipients triggers some process that results in a reevaluation and enforcement of EAPs associated with the modified recipient. 
    The gist of these finding for me is that I can use non Exchange tools to update AD and EAP reevaluation will not be triggered.  I'll do some testing to confirm, but i think that this heads me in the right direction.  
    Thank you!

  • Updates not applying to 2012 servers

    Hi guys,
    Our ConfigMgr server is 2012R2 with SUP.
    I have noticed that our 2012 servers are not applying updates.
    Checking in the WindowsUpdate.log for these servers I can see the following:
    WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    Checking online and most are suggesting installing a WSUS update – KB2734608 But our WSUS is v6.2 and I do not believe this update is applicable.
    The UpdatesDeployment.log shows this (but no actual errors): No current service window available to run updates assignment with time required = 1 Attempting to install 0 updates
    I have confirmed the maintenance windows for the servers via the built in report.
    Any help getting these servers patched would be greatly appreciated.
    Edit: SCEP updates are being applied ok.
    Regards,
    Locust12

    The errors are spread through the file, I have copied a few repeating ones here and linked the full file via Dropbox.
    WARNING: WU client failed Searching for update with error 0x80248014
    WARNING: Exit code = 0x00000000, Result code = 0x80248014
    COMAPI    WARNING: Operation failed due to earlier error, hr=80248014
    REPORT EVENT: {32898FA6-A6CE-4B10-ABA0-8D43666E9B3A}    2015-01-11 13:04:34:392+1100    1    148 [AGENT_DETECTION_FAILED]    101    {00000000-0000-0000-0000-000000000000}  
     0    80248014    System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)    Failure    Software Synchronization    Windows Update Client failed to detect with
    error 0x80248014.
    WARNING: Failed to get service object: 80248014
    WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
    WARNING:     IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 1, GetLastError=2250
    https://dl.dropboxusercontent.com/u/32055319/WindowsUpdateEdited.log
    Regards,
    Locust12

  • Non-mapped attributes not merging!!

    I found this on webgain's web site (http://www.webgain.com/download/toplink/patches/toplink_301.html). This is exactly what I am talking about. Can somebody help with this? I have a case where I actually make a change to a mapped value, but the unmapped values are lost.
    26601
    Non-mapped attributes not merged in UnitOfWork. Previously, the UnitOfWork would merge non-persistent attributes on commit.
    With the introduction of ChangeSets in 3.0, if changes were made to only non-mapped attributes, then this was considered no change - no merge would take place and no PostMerge event would be thrown. This has been changed back to the TopLink 2.5.1 behaviour - non-mapped attributes will now be merged, and will trigger PostMerge events.

    Nate,
    I first off want to clarify that TopLink does not manage un-mapped attributes in any way. The change-set calculation and merge from the working copy into the shared cache copy only applies to mapped attributes.
    If you would like to have un-mapped attributes carried through your UnitOfWork interactions you will need to implement a DescriptorEventListener and register it with the descriptor's event manager (typically in an after-load method).
    The patch mentioned was for the handling of these events. If you have implemented such a listener and are not seeing the correct method calls then we have an issue. In this case let us know what version of TopLink you are using and what the specific scenario where you are not getting the behavior you expect.
    Doug Clarke

  • Text not printing or PDFing. Non-printing is not applied. Help?

    I have a logo. The top is on a path applied to an oval. Same with the bottom. In the middle is an ampersand (&). When I try to print, only the ampersand prints. I've tried printing to 2 different machines. I also tried saving it as a PDF but I lose everything except the ampersand in the middle. Everything is colored black, so there are no weird colors going on. Non-printing is not applied to anything. Any thoughts? I can send the file to somebody if they want to check it out.
    ID CS 3
    Thanks,
    Chris

    Sorry for the delay. Spent some time looking for the font becasue I'm on Windows.
    I opened it first in CS5, and after font substitution it exported fine, so I figured maybe it was a font problem on your end, but just to be safe I opened it in CS3 to check. Same problem here that you have on your end.
    Good news, though. I exported to .inx and opened that. That page opened at 11 inches high, which may be part of the problem, but after resizing, it exported correctly. This is a pretty good inidcator of some minor corruption that is fixable by the export. See Remove minor corruption by exporting

  • Number format mask of text item is not applied

    Hello all,
    I want to format a number like 999G999G999G999G990D00
    Is specify the format mask under source of the item. But it is not applied and I don't understand why.
    See http://apex.oracle.com/pls/otn/f?p=53873:2 for example
    Btw. is it possible to set the format for all numbers in the application at once? I want to have a thousand separator in most cases.
    Message was edited by:
    Jacob_B

    Hello Jacob,
    Btw. is it possible to set the format for all numbers
    in the application at once? I want to have a thousand
    separator in most cases.I am using substitution strings for things like that. You can define some "global" substitution strings on page application definition.
    So you just have to put in the format (999G999G999G999G990D00 ) in there once and give it a name. Let's say NUMBER_THOUSAND.
    Afterwards you can reference it wherever you need the format e.g. this way:
    to_char(10000,'&NUMBER_THOUSAND.').
    This way you just have one place where to change the format model.
    Regards,
    Tine

  • I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Can someone please help me get my iPhone to sync to your computer?
    I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • Selection criteria are not applied to summary fields on group footers.

    I wonder if anyone can help me with this problem.  I am using Crystal reports version 11.2, and my data source is a Sql Server view.
    The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
    The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
    So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
    ie ....                record1                      2
                           record2                      8   
                           group level total         10
    This works fine when I run the report using Crystal's "print preview" facility.  However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                           record1                      2
                           record2                      8   
                           group level total          19
    I tried putting the date selection criteria at both record and group level, but that did not work.
    I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above.  However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
    In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
    In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer.  In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
    While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
    The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae.  The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them.  And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
    Please tell me that there is something simple that I have been doing wrong!!!  If I have not given enough information for you to answer, please let me know.
    Thanks,
    Anne-Marie

    Hi, Anne-Marie;
    You may be running into a common issue that is docuemented here:
    [SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
    Regards,
    Jonathan
    Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

  • Why is my CSS style not applied to my HTMLB page ?

    Hello !
    I'm using a css file to define the layout of my htmlb page... but the layout is not applied.
    When I specify the layout CSS in a common html page the layout is applied but not for an htmlb page.
    Could someone let me know where I'm wrong ?
    EG :
    My htmlb page :
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content>
      <htmlb:page title=" " >
          <html>
                <head>
                <link href="style.css" rel="stylesheet" type="text/css">
                </head>
                <body>
                text1
        <htmlb:form>
            text2
        </htmlb:form>
                </body>
          </html>
      </htmlb:page>
    </htmlb:content>
    My css file style.css :
    <%@page language="abap"%>
    body {
        background-color: #990000;
        font-family: Verdana;
        font-size: 32x;
        line-height: 32px;
        color: #666666;
    As a result, I have a blank page (and not red) with the text "text1" and "text2" written.

    This code you have is unfortunately completely bogus. It is just not going to work. Writing HTMLB tags are easy. It takes but minutes to make the magic appear in the browser. But, you have also have to understand a little about what is happening.
    At a very first, I would like to recommend this link: <a href="/people/brian.mckellar/blog/2004/06/11/bsp-trouble-shooting-getting-help">Getting Help</a>. You are specifically interested in the section that shows you how to get help about specific tags.
    As a next step, look at the help for the <htmlb:page> tag. It is the first important one. See how it is a collection of other <htmlb:document*> tags.
    Thereafter, look at SBSPEXT_HTMLB/document.BSP for an example on how to replace the <htmlb:page> sequence in your application.
    Once this is done, place you "<link ...>" sequence directly after the <htmlb:headInclude> tag that you have now on your page.
    Compile, test, assign 10 points.

  • Sysprep unattend file not applying when image is captured with wds (no errors)

    So I've been around the block a bit using sysprep and wds.  Recently I've created a reference image with a virtualbox environment using windows 7 x64. I was succesfully able to create a reference image, sysprep it and capture it to the wds server. My
    plan there after was to create driver specific images for each model computer we use here after not having much success using the driver store (another story)
    Any how So I take my reference image and deploy it to a new computer... In this case an HP Probook 5310m.  Install any missing drivers and Sysprep it with the following command.  sysprep /generalize /oobe /unattend:unattend.xml /shutdown
    Below is the sysprep file I have been using
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="generalize">
            <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipRearm>0</SkipRearm>
            </component>
            <component name="Microsoft-Windows-PnpSysprep" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <DoNotCleanUpNonPresentDevices>true</DoNotCleanUpNonPresentDevices>
                <PersistAllDeviceInstalls>true</PersistAllDeviceInstalls>
            </component>
        </settings>
        <settings pass="specialize">
            <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipAutoActivation>true</SkipAutoActivation>
            </component>
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <ShowWindowsLive>false</ShowWindowsLive>
                <TimeZone>Eastern Standard Time</TimeZone>
                <CopyProfile>true</CopyProfile>
                <ProductKey>74fdj-7dtw8-q9mp9-ypth8-qb27y</ProductKey>
            </component>
        </settings>
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <OEMInformation>
                    <Logo>c:\windows\system32\oemlogo.bmp</Logo>
                    <SupportHours>Regular Business Hrs (Overnight Support Provided)</SupportHours>
                    <SupportURL>url</SupportURL>
                    <SupportPhone>Phone number</SupportPhone>
                </OEMInformation>
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <NetworkLocation>Work</NetworkLocation>
                    <ProtectYourPC>1</ProtectYourPC>
                    <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
                </OOBE>
                <UserAccounts>
                    <LocalAccounts>
                        <LocalAccount wcm:action="add">
                            <Password>
                                <Value>TAAxAEQAMwBzAHQAcgBpACEAUABhAHMAcwB3AG8AcgBkAA==</Value>
                                <PlainText>false</PlainText>
                            </Password>
                            <Description>Local Administrator</Description>
                            <DisplayName>Root</DisplayName>
                            <Group>Administrators</Group>
                            <Name>Root</Name>
                        </LocalAccount>
                    </LocalAccounts>
                </UserAccounts>
                <TimeZone>Eastern Standard Time</TimeZone>
                <ShowWindowsLive>false</ShowWindowsLive>
                <FirstLogonCommands>
                    <SynchronousCommand wcm:action="add">
                        <Order>1</Order>
                        <CommandLine>slmgr.vbs /ipk {serial key}</CommandLine>
                    </SynchronousCommand>
                    <SynchronousCommand wcm:action="add">
                        <Order>2</Order>
                        <CommandLine>slmgr.vbs /ato</CommandLine>
                    </SynchronousCommand>
                </FirstLogonCommands>
            </component>
            <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <InputLocale>en-US</InputLocale>
                <SystemLocale>en-US</SystemLocale>
                <UILanguage>en-US</UILanguage>
                <UILanguageFallback>en-US</UILanguageFallback>
                <UserLocale>en-US</UserLocale>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="catalog:v:/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    The machine succesfully syspreps and shuts down. I restart the computer pxe boot and capture the image succesfully.
    Now here comes my problem...
    Upon deploying the above driver specific image.. my sysprep file is not applied.  Nothing from the OOBE wizard answers to the pc logo , or first logon commands are applied ... nothing.. I have gotten no errors during this whole process.  I have
    started to try to read the logs within the panther folder but havent gotten far.
    What is weird to me is that I have tried recreating this image... deploy the reference image... add drivers ... sysprep ...shutdown.  And if I boot normally (without capturing the image) the computer shows all of the sysprep changes..  Only when
    i capture the image does it not apply the changes....
    I'm stumped...
    Any ides?

    Confirm this scenario: You installed Windows, then ran sysprep and used the /unattend switch. Then you captured the image.
    In this scenario there are 2 deployment methods.
    1. If you deploy the image with DISM, the answer file generated by sysprep is detected on first boot and settings are applied. It is the same function as if you ran sysprep and chose to restart.
    2. If you deploy the image using Setup.exe, it does not use the answer file specified by sysprep prior to capturing. I have not looked into *why* this happens, but I suspect that after the image is applied, it replaces the unattend.xml with the generic one.
    If you are using Setup.exe, you need to use its /unattend switch and point to the answer file location. This location cannot be inside of the image. If you are not using setup.exe in a manual method (using WDS) you will need to apply the answer file to the
    install image in the WDS snap-in.

Maybe you are looking for