MBean Attribute (Does not apply to application modules)
Can any one tell what this mean ?
MBean Attribute (Does not apply to application modules) :
is this means that it wont help for datasources for any J2EE application ????
Inactive Connection Timeout
The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.
You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.
When set to 0, the feature is disabled.
MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds
Minimum value: 0
Maximum value: 2147483647
Yes!, they do not apply for any applications they are management interfaces, internal to weblogic.
Below is the brief information about it:
A managed bean (MBean) is a Java bean that provides a Java Management Extensions (JMX) interface. JMX is the J2EE solution for monitoring and managing resources on a network.
BEA WebLogic Server provides a set of MBeans that you can use to configure, monitor, and manage WebLogic Server resources through JMX. This reference document organizes WebLogic Server MBeans into the following categories:
MBeanServer Services, which serve as your entry point into navigating the MBean hierarchies. Some of these MBeans contain attributes and operations for managing changes to WebLogic Server configuration MBeans.
Configuration MBeans, which expose attributes and operations for configuring WebLogic Server resources.
Runtime MBeans, which provide information about the runtime state of its resources.
New MBeans, which have been added in the current release of WebLogic Server. These new MBeans are also listed in other categories in this document (for example, new runtime MBeans are also listed under the Runtime MBeans category).
Deprecated MBeans, which are deprecated in the current release of WebLogic Server.
Similar Messages
-
Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database ! -
Work order to cost center settlement does not post to GL module (FI)
Dear Expert,
I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
Please advice.
Thank you.
KHHi Kiran,
The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
Change the cost center from period in the past date and try.
BR, Srinivas Salpala -
Nvidia module does not exist in /proc/modules
Hi!
I compiled kernel with grsecurity from AUR. everything goes fine, and my system boot with a new kernel.
Only thing i have a problem with, is nvidia module.
I'm tried to makepkg nvidia with ABS way, but i get errors:
ERROR: Module nvidia does not exist in /proc/modules
In order to use the new nvidia module, exit Xserver and unload it manualy.
I"m trying to do:
modprobe nvidia
but i get:
FATAL: Error inserting nvidia (/lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko): Cannot allocate memory
When i write :find /lib/modules -name nvidia.ko
I get: lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko
When i write: uname -r
I get: 2.6.32-grsec-ARCH
Any help please..you have to reboot after installing nvidia because the > 2.6.34 kernel has nouveau and is using the card.
-
Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"
Hi,
A general question about hot fix installs.
I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a bulk install during a release cycle ( a couple times a year). I just realized that NO HF's have installed since JUNE 2014. Every HF that shows up in WindowsServer2012R2 directory fail to install with a message of "The update is not applicable to your computer". Which is fine if that was true, but.... I get this message for every HF from the ISO's since June 2014. NOT one HF thinks it is applicable to my computer. Could that be the case? No HF's apply to my Server 2012 systems since June of 2014?
This is my system info, and below that is the results from attempting to install 95 HF's.
C:\TEMP>systeminfo
Host Name: MYHOST
OS Name: Microsoft Windows Server 2012 R2 Datacenter
OS Version: 6.3.9600 N/A Build 9600
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Windows User
Registered Organization:
Product ID: 00252-80025-36226-AA727
Original Install Date: 6/13/2014, 8:04:39 AM
System Boot Time: 3/16/2015, 2:34:45 PM
System Manufacturer: Dell Inc.
System Model: PowerEdge R720
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
[02]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
BIOS Version: Dell Inc. 2.2.2, 1/16/2014
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (UTC-07:00) Mountain Time (US & Canada)
Total Physical Memory: 262,099 MB
Available Physical Memory: 249,337 MB
Virtual Memory: Max Size: 301,011 MB
Virtual Memory: Available: 288,015 MB
Virtual Memory: In Use: 12,996 MB
Page File Location(s): C:\pagefile.sys
Domain: mydomain.sgn
Logon Server: \\MYHOST
Hotfix(s): 25 Hotfix(s) Installed.
[01]: KB2862152
[02]: KB2868626
[03]: KB2876331
[04]: KB2888505
[05]: KB2892074
[06]: KB2893294
[07]: KB2893984
[08]: KB2898785
[09]: KB2898868
[10]: KB2898871
[11]: KB2900986
[12]: KB2901125
[13]: KB2901128
[14]: KB2909210
[15]: KB2909921
[16]: KB2912390
[17]: KB2916036
[18]: KB2919442
[19]: KB2922229
[20]: KB2923392
[21]: KB2925418
[22]: KB2930275
[23]: KB2931358
[24]: KB2931366
[25]: KB2936068
Network Card(s): 6 NIC(s) Installed.
[01]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: ISCSI
DHCP Enabled: No
IP address(es)
[01]: 192.168.1.30
[02]: fe80::38c9:e59c:5ac2:e0a1
[02]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: NIC3
Status: Hardware not present
[03]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: MGMT
DHCP Enabled: No
IP address(es)
[01]: 7.48.64.32
[02]: 7.48.64.30
[03]: fe80::f14e:9339:9326:c7fd
[04]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 1_swport_VMRepwan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
[05]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: NIC2
Status: Hardware not present
[06]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 2_swport_VMOpswan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
Hyper-V Requirements: A hypervisor has been detected. Features required for
Hyper-V will not be displayed.
I have a script that runs each HF install.. If I run them manually without the tool I get the same results so it is not the script..
Installing 95 patches
for Microsoft Windows Server 2012 R2 Datacenter x64
Repository path: U:\Patch Repository_4_1\2012_R2_HFs\
1. Windows8.1-KB2894852-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
2. Windows8.1-KB2894856-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
3. Windows8.1-KB2920189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
4. Windows8.1-KB2926765-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
5. Windows8.1-KB2928120-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
6. Windows8.1-KB2931358-x64.msu patch status: ALREADY INSTALLED - SKIPPING
7. Windows8.1-KB2931366-x64.msu patch status: ALREADY INSTALLED - SKIPPING
8. Windows8.1-KB2933826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
9. Windows8.1-KB2939576-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
10. Windows8.1-KB2953522-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
11. Windows8.1-KB2957151-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
12. Windows8.1-KB2957189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
13. Windows8.1-KB2957689-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
14. Windows8.1-KB2961072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
15. Windows8.1-KB2961887-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
16. Windows8.1-KB2962872-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
17. Windows8.1-KB2964718-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
18. Windows8.1-KB2964736-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
19. Windows8.1-KB2965788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
20. Windows8.1-KB2966072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
21. Windows8.1-KB2966826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
22. Windows8.1-KB2966828-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
23. Windows8.1-KB2971850-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
24. Windows8.1-KB2972213-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
25. Windows8.1-KB2972280-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
26. Windows8.1-KB2973114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
27. Windows8.1-KB2973201-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
28. Windows8.1-KB2973351-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
29. Windows8.1-KB2974008-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
30. Windows8.1-KB2976627-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
31. Windows8.1-KB2976897-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
32. Windows8.1-KB2977292-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
33. Windows8.1-KB2977629-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
34. Windows8.1-KB2978668-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
35. Windows8.1-KB2982794-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
36. Windows8.1-KB2982998-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
37. Windows8.1-KB2987107-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
38. Windows8.1-KB2987114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
39. Windows8.1-KB2988948-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
40. Windows8.1-KB2992611-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
41. Windows8.1-KB2993651-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
42. Windows8.1-KB2993958-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
43. Windows8.1-KB3000061-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
44. Windows8.1-KB3000483-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
45. Windows8.1-KB3000869-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
46. Windows8.1-KB3001237-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
47. Windows8.1-KB3002657-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
48. Windows8.1-KB3002885-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
49. Windows8.1-KB3003057-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
50. Windows8.1-KB3003381-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
51. Windows8.1-KB3003743-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
52. Windows8.1-KB3004150-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
53. Windows8.1-KB3004361-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
54. Windows8.1-KB3004365-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
55. Windows8.1-KB3005607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
56. Windows8.1-KB3006226-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
57. Windows8.1-KB3008923-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
58. Windows8.1-KB3008925-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
59. Windows8.1-KB3010788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
60. Windows8.1-KB3011780-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
61. Windows8.1-KB3013126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
62. Windows8.1-KB3013455-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
63. Windows8.1-KB3014029-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
64. Windows8.1-KB3018943-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
65. Windows8.1-KB3019215-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
66. Windows8.1-KB3019978-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
67. Windows8.1-KB3020393-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
68. Windows8.1-KB3021674-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
69. Windows8.1-KB3021952-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
70. Windows8.1-KB3023607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
71. Windows8.1-KB3036197-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
72. Windows8.1-KB3021953-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
73. Windows8.1-KB3022777-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
74. Windows8.1-KB3023266-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
75. Windows8.1-KB3023562-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
76. Windows8.1-KB3024663-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
77. Windows8.1-KB3029944-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
78. Windows8.1-KB3030377-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
79. Windows8.1-KB3031432-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
80. Windows8.1-KB3032323-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
81. Windows8.1-KB3032359-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
82. Windows8.1-KB3040335-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
83. Windows8.1-KB3033408-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
84. Windows8.1-KB3033889-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
85. Windows8.1-KB3034196-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
86. Windows8.1-KB3034344-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
87. Windows8.1-KB3035017-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
88. Windows8.1-KB3035034-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
89. Windows8.1-KB3035126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
90. Windows8.1-KB3035131-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
91. Windows8.1-KB3035132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
92. Windows8.1-KB3037634-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
93. Windows8.1-KB3039066-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
94. Windows8.1-KB3044132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
95. Windows8.1-KB3046049-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
Thanks,
Dave
Hi Dave,
Would you please check CBS lg file and other relevant event logs if find more clues? On current situation, please refer to following article and check if can help you.
Update is not applicable to your computer- but it is
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!
Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
There are ways to do this however, try searching Google for: Installing Logic 8 under Lion or Mountain Lion. -
Clicking a Paragraph Style Does Not Apply Style to Text
I just switched from a PC to a brand new MacBook Pro (OSX Lion 10.7), and I bought InDesign CS5.5. I have been using CS4 on a PC for a couple of years and had no issues. For some reason, I cannot apply Paragraph Styles by placing my cursor in the text and clicking the Paragraph style. It highlights the clicked style for a moment, and then de-highlights all the styles, but does not apply any changes. The only way I can apply a Paragraph Style right now is by right clicking the style and selecting "Apply..." from the drop down menu. It's very puzzling. I was wondering if anyone had any experience with this. I also have Microsoft Office: Mac 2011 installed on the laptop if that makes a difference to anyone. Any help would be greatly appreciated, since I typeset and edit for my living, and this problem is slowing me down a bit.
Neither. Let's say I click into a paragraph. The current style will be highlighted. If I click on another style (or even attempt to re-apply the same style by clicking on it in the styles pane), it momentarily highlights the new style, then flashes a little bar underneath (like the one that shows up if I were to try to re-organize the styles list by dragging a style to a different pace in the styles list), then all the styles become unselected, but no changes have been applied to the paragraph in question. Very definitely not normal. It is almost as if the pane assumes that I am attempting to drag the style even when I am merely clicking on it. Very weird.
-
R9 290 Gaming - MSIGamingApp: The platform does not support this application
Hey guys,
I have a MSI R9 290X Gaming 8G and can´t use the gaming app.
Whenever I try to run the app, I get an error: The platform does not support this application
So I guess I have the same problem as the dude in that thread:
https://forum-en.msi.com/index.php?topic=179659.0
He had the same issue with the R9 290X Gaming 4G. The problem was, someone flashed a sapphire vbios on his new card.
So can someone check the attached vbios rom, whether it is the right one for my card and not also a sapphire rom or something else?
Thanks and regards.I seem to have the same problem using the Live Update App itself. My card is MSI R9 270X Gaming and I use Windows 8.1 64bit.
S/N: 602-V303-03SB1311026767 -
X does not apply to your selection because it is not inherited...
Hi
I'm trying to design a website using HTML and CSS. I have done the basic layout of the website using Div tags. However, the middle column of the website is showing up differently in Dreamweaver compared to on a browser.
I have researched the problem and found that it is caused by an error occuring on the middle column and the wrapper tag not applying to it: "x does not apply to your selection because it is not inherited. It is applied to an enclosing tag".
The code for my web page is here:
http://pastebin.com/DfXLL7Zb
This is my CSS styles code:
http://pastebin.com/81u476zE
Any help would be appreciated.
CheersThis tells me you have unbalanced opening and closing <div> tags somewhere in your document.
Use the validation tools to check your code.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
In the web forums, you can mark this discussion as answered.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Your Application Set does not match the applications in your Retrieval Rule
Hi,
While creating the time card iam getting the error:Your Application Set does not match the applications in your Retrieval Rule Group.
Please Suggest the solution.
ThanksIn Our case, we created a new PERSON TYPE in HR and we forgot to add this type to OTL Preferences.
So in the above scenario:
Go to US OTL Application Developer -> Preferences ->
In the Eligibility Tab. add new row
Name of Rule => any unique name
Name of Branch => enter the name of an existing branch which the time card preferences are going to be the same.
Link By => We use Person Type... You can choose PERSON here but i would not know why you would want to do that
Linked To => Person Type you want to have this for
Precedence => Unique Number
From => make sure to enter an earlier date especially when people are required to enter older than todays timecard since this field defaults to today.
If you totally dont have or want to build a new preference, then you will have to go to the Preference Tab and create a new branch.
in ours, we have Timekeeper and TimeStore and Employees
in Timekeeper -> we have timekeeper timecard layout
in TimeStore -> we have approval style, entry level processing rule, time entry rule groups, timestore retrieval rule group
in Employees -> all we have is really those preferences we;d like to see. Date Format, Enter Negative Hours, Enter Override Approver, Number of Empty Rows, Timecard Delete Allowed, Timecard Layout, Number of Recent Timecards displayed, timecard status allowing edits.
Hope the above helps -
I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?
Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.
-
Header business data does not apply to item
I have a document that i want to delete but the system won't allow me to do any changes due to error message we are receiving when entering this order "Header business data does not apply to item". Please help me reject the this order. By the way, the document is Debit Memo Request.
Hope to hear from you guys. Thanks in advance.Hi Riyaj,
To answer your questions:
1. There were no preceding docs existed.
2. I already put reason for rejection, however, there is a warning message that it cannot be deleted.
3. I am creating a Debit Memo Request. I want to do some changes to this particular document but Information Message "Header business data does not apply to item" keeps on appearing. -
i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse. -
Does not open the application tab
does not open the application tab
http://adobe.ly/1h3Ng0c
How resolve???Hello SnNick,
Rename the opm.db file.
Close the Creative Cloud application if it's running.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
Rename the opm.db file to opm_old.db
Launch Creative Cloud
Make sure that you unhide the hidden files of your computer or else you will not fir "AppData" folder.
Do let me knew if it worked or not.
Regards,
Ratandeep Arora -
The platform does not support this application, but does under other account
Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
Even when I try to run the app as administrator it keeps coming back with this warning.
Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.Quote from: JLio01 on 11-December-14, 14:49:39
1. What's your App version?
2. What's the mobo/vga/specs of your son's pc?
First of all thanks for the replies and future replies.
1.
Version 1.0.0.18
2.
My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
I do know how to add permissions to the security tab have been doing that several years for some job I had once.
I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
And in case of trying a re-install of the App anyone got an url for a new version?
Might have found it but it isn't on any MSI webpage.
I did found something on Guru3D but I'm not aloud to post external links.
Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
So a clean url would be nice so to say.
So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site
Maybe you are looking for
-
No Apple Remote Settings in Security Preferences
Hi everyone, I purchased an Apple Remote to control my iTunes, QuickTime, DVD Player, etc. on my macbook Pro 15". However, I cannot pair the two devices because the preferences are missing in Security. I have tested the remote (with iSight) to confir
-
How do i remove my old printer icon/software?
i recently bought a new printer and installed in on my mac, and am no longer using the old HP as the wireless radio doesnt work. the HP icon is still on my dock, and i want to remove the software and the icon. new printer is installed, but the icon i
-
Font Size Difference between Exe and Labview IDE
I'm stumped on the following issue and surprizinglycan't find any references that are similar on this forum. I've developed an application which, when built to an Exe, has different font sizes than when executed on the same computer in the Labview In
-
Why is my text moving around in the preview?
Hi guys, I have had this problem on several occasion on different pages of my website. It seems that I set the dimensions of a text box and the text inside does not adhere to those dimensions. Words will jump down on lines of their own, text boxes wi
-
Hi, Forms Builder: 6.0.8.22 Runtime version: 10gAS Rel 2 (Form developed in 6i and compiled and run on 10g) We have a form with multiple tabs based on single blocks. When i click on any tab other than first tab (i will call it as base tab), after som