Synchronizing apps. and they stop working

I have an iPod Thouch 32 GB with the latest software, and iTunes 9 (latest)
After downloading apps directly to the iPod, everything is working perfectly. But after synchronizing with the computer they stopped working. Apps downloaded to the computer will not synchronize into the iPod.
I have tried deleting the SC folder, that did not help.
I have tried turning off and on security settings in windows, that did not help.
Podcasts are synchronizing propperly and without any problems.
The apps is not.
I get authorization issues. I have two computers authorized. I have also tried removing authorization and re-authorizing the computer.
I am getting out of options on how to solve this issue. Hope someone can help me, because this is getting realy frustrating...

Have you tried resetting the iPhone? Push and hold the home and sleep/wake buttons until the Apple logo appears. If that doesn't help try restoring it from backup. If that still doesn't work you might have to restore as new.

Similar Messages

How do I get the on/off sliding toggles to work in settings and apps? They stopped working after I upgraded to iO6.

After updating to iO6 on my iPhone 4S, the sliding on/off toggles do not work. For example, I can't get the phone out of Airplane Mode. Or, I can't change settings in apps. The slider will not work at all. This is true in both settings and in apps.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

IPhone Apps and Music Stop Working

I've had this happen several times a week over the past year--getting tired of it. I will go to use my iPhone, either to play music, use an App, or make a phone call, and it just stops working. All of these things go wrong at the same time.
1. The iPod app opens and I see the screen art. But when I hit the "play button", the music won't play--the "pause" button quickly appears and then becomes the "play" button again.
2. When I select an app to open, it opens briefly and then immediately returns to the main iPhone screen. The only "apps" that will open are the apps that came with the iPhone (clock, calendar, etc.).
3. Even though I have network coverage, my phone will not connect (can't make or receive calls, connect to the internet, or receive/send e-mail).
Since these things all happen at the same time, I think they're related. I usually have to turn off/on the phone several times to clear it out--is very frustrating when I need to make a phone call and can't. Any "permanent" fixes??
Thanks!!

Have you tried resetting the iPhone? Push and hold the home and sleep/wake buttons until the Apple logo appears. If that doesn't help try restoring it from backup. If that still doesn't work you might have to restore as new.

HT1349 I had iTunes and QuickTime on my p.c. and they stopped working. Now I can't uninstall them or re-install them. I'm stuck and Apple doesn't seem to have any avenue to go down concerning their programs. I'm getting really frustrated. Anybody know wha

Why can't I get my iTunes or Quicktime to play? I've had my pc checked and it isn't a problem there. My java is up to date and all other programs work well. Other people I know have been having similar problems with Apple downloads. Now I can't uninstall them therefore I can't re install them. Help! Anybody out there have the same problems? I've tried every suggestion I've gotten from these blogs and can't get Apple to respond.

why are you posting this in the iPhone forum?

I used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my phone and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated

i used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my iphone 5 and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated and im really unsure of whats the case. i really really need help with this. please help asap!!

Presuming you are using a wall charger - it would seem that your battery needs to be looked at in an Apple store

My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

Hi JDValentine,
If you are having issues with a camera on your iPhone, you may find the Camera troubleshooting in the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
- Brenden

My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?

My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?

I failed to mention that the sound does play on the videos that are not playing.

Tiles and charms stop working

Tiles and Charms stop working. When tiles stopped functioning (clicking on tile on desktop causes the desktop tile itself to scroll) and I could still access the search charm, I ran sfc/scannow as admin. It showed a couple of corrupt files it could not fix, but on reboot, the tiles and charms functioned again. Have been through this about four times at this point.
Seems to have started with the last Windows 8.1 update, and is somehow related to the OneDrive syncing engine. I had not used OneDrive; started using it, and this mess started. I disabled all pc and laptop OneDrive settings and stopped using it. However, the "OneDrive sync engine" message appears for no apparent reason, and then the tiles and charms stop working. If I have Outlook and Foxfire apps open, they still work, and their open windows still appear in the bottom toolbar. All the other app shortcut links that normally pinned there disappear.
When I try to shut the PC down, if I can do so via the power charm, I get a message that it can't shut down because the "Portrait Display Inc. app is preventing shut down." There is no such program shown in the installed program list in Control Panel. I understand from Googling it that it's somehow embedded in HP PC's.
This is an HP Envy Phoenix 810, with an HP monitor (non-touch), both purchased Dec., 2013. Running Windows 8.1, on automatic updates; using McAffee All-Access AV, up to date. Standard Office apps. No goofy software.
I see that many other people have had this problem, have used the sfc/scannow approach, with little lasting effect.
This question was solved.
View Solution.

Plnjmw, welcome to the forum.
If you have Windows System Restore setup, I suggest going back to a Restore point before you began having the problem. This will tell you if the update is the problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

FaceTime and Messages stopped working on my MacBook after I updated to Yosemite. Handoff does not work either. How can I fix this?

Before I updated to Yosemite, I could FaceTime other people and Message other people with the MacBook Pro apps. However, after I updated to Yosemite, they stopped working. I get "not delivered" feedback on Messages, and "call failed" on FaceTime. I made sure that both have the correct emails checked and unchecked in the settings as my iPod, and made sure that the "make calls from" or "begin new conversations from" coincide with my handheld Apple media player.
Am I not doing something? Am I doing something wrong?
Any feedback would be appreciated!
Thanks!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

X1 Carbon touchpad and trackpad stops working.

Received my new X1 Carbon 2014 this week. After only two minutes of use, the trackpad and toucphpad stopped working.
I hade to use an external mouse, and even after all driver updates it still didn`t work.
If I restart the machine, sometimes the track-touchpad will work, but suddenly it freezes up again (after only minutes of use), and I will have to restart to fix the problem. Have used it for 5 hrs now, and how probably restarted about 30-40 times.
Anyone know what is causing this problem and/or how I can fix it?
//alex

Same issue here.
Bought my X1 carbon 20A7 last month.
The touchpad and trackpoint stop working after a while. Sometimes after minutes of use, sometimes after half an hour. When I close the lid, to let it go to sleep, and wake it up again they both work again. Another interesting (might be a coincedance) issue is that when I wake the laptop up after this has ocurred, the fingerprint reader does not work to log back on.
I have done a fresh install of windows 8.1 and updated all windows and Lenovo drivers.
I hope this gets solved quickly. It's kind of ridiculous for such a premium laptop.
Lenovo?

Appletv remote app and airplay not working with iphone 4S

I have the latest appleTV. I have the remote app loaded onto my ipad3 and iphone 4S. The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV. It used to work. I have deleted and reloaded the app, and still nothing. It worked fined until a month ago or so. I have enabled home sharing.
The app and airlplay are working just fine with the ipad3. I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router. I don't think this is the issue, because it worked before.
Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC. Nothing seems happed on the computer when I enter the code. Could this have anything to do with recent appleTV or itunes updates? Any possible solutions?

It seems like I am having the same problem.
I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
(1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
(2) iMac not Airplay to AppleTV
(3) Airplay Mirroring not working
The following are done:
- Home sharing enabled
- To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

Windows 8.1 Onboard Keyboard and Touchpad Stopped Working.

After upgrading to Win 8.1 my keyboard and touchpad stopped working suddenly. They both worked fine for the entire Windows 8.0 release. When I upgraded to 8.1, they both worked for about 3 months. Then what started happening is the computer
would freeze during the startup process.
Now they both don't don't work. But a USB powered mouse works. So with a USB powered mouse and the on screen keyboard I have been troubleshooting. I have removed the drivers from the device manager, reinstalled the drivers, searched for
driver updates etc. Nothing works.
Can someone please point me in the right direction. PC is kind of useless at the moment.

Hi,
Kindly check this application that can show incompatible/unwanted/untrusted/ applications then remove these with different kinds of PC cleaner/Application removal tools.
http://www.getsysteminfo.com/
After Downloaded, Run the Application and Save Report, Upload the Report and Press Submit Button and Click Read the report as an Expert.
If you found anything in these 2 Auto analyses
then find the solution.
1) Driver To Update:
2) Application to Update:
Good Luck!

Itunes doesn't play certain songs and just stops working

it was fine a couple of weeks ago but now it just doesn't play some songs and whenever I doule click those songs it went straight to "Itunes has stopped working." and I have to close the program. Today I just bought a song from Itunes store and it doesn't play either and Itunes stops working as well!!
Please help. this is so annoying.

@ King-Penguin -- no, they don't and that seems to be the problem, thanks!
Why are the ticks important, and do you know how I can tick my entire collection?
Richard

Synchronizing apps. and they stop working

Similar Messages

Maybe you are looking for