Synchronous and asynchronous IO on the same file descriptor

Hi does any body knows about problems in combining synchronous and asynchronous IO on the same file descriptor? It appears that I may miss SIGIOs in that case.

I don't think there is any real easy way to do an insert. If writing to a file, I would use a FileWriter, a FileOutputStream, or a RandomAccessFile class. I don't know of any class that will automatically do an insert so you might have to write your own method that does this. This is pretty easy: use RandomAccessFile might be the best for most situations for doing this (ie, if you are inserting many times at different locations in the file). Just copy all the bytes from the point in the file you want to insert to the end of the file, and then write your bit, and then rewrite all the read bytes to the file again. Depending on how many times you are writing to the file and how big the file is, you may want to keep the file in memory at all times because writing to disk is extremely slowwww. If the file is huge, and you are inserting seldomly, then do what I said above. If the point of insertion is closer to the start of the file, then it might be a good idea to do the above but instead of copying the bytes from the point of insertion to the end of the file, copy the bytes from the start of the file to the point of insertion.

Similar Messages

Is there any way i can keep pages documents and numbers documents in the same file?

Im trying to group pages and numbers documents in the same file is this possible?

Not on the iPad itself, no. iOS apps keep their documents within each app itself. You would need to save the documents to a WebDAV server. Dropbox can serve this function if partnered with DropDAV. See:
http://techinch.com/blog/integrate-dropbox-with-pages-keynote-and-numbers-on-ipa d
Regards.

How to import nef and psd versions of the same file ?

Hi, I am new to this so please forgive any daftness. I am trying to import from a folder with nef and psd versions of the same file. Lightroom does not seem to recognise the nef if a psd exists. In fact if I specifically try to import the nef later, I get the message that says lightroom will not import the file because it already exists. The import is set to keep the originals in the existing location and the database is new. This is the first import I have done and noticed that the file count did not match.
I need to do this because I need to create alternative psd files from the same raw file but I do not see how.
The psd were created via the bridge to photoshop route.
Please what am I doing wrong ?
Many thanks

Hi thanks for the quick reply. For a "database" application that seems a bit scary. Also I have found that it will import psd and tif and jpg versions of the same file which makes it even odder.
Do you know if there is a way to tell it to favour nef rather than psd ?
thanks,

How can I save images and text data to the same file?

I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.

well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
For more information and some sample VI's and tool kits, you can go to the excel board
Joe.
"NOTHING IS EVER EASY"

How do I get itunes and iphoto to have the same files on multiple users?

Every time I upload a disc or photos, they show up on my user profile, but not my wife's. It seems like I am wasting a ton of hard drive space reloading the same things between each user. I tried the "shared" folder, but i am not sure that worked.
Thanks for the help...

I don't think that Thomas's solution will work on 10.5.
There are two ways to share, depending on what you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
Quit iPhoto in both accounts
Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a dmg.
In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

MPEG-1 and MPEG-2 in the same file

I am being asked to deliver a muxed file containing
Video: MPEG-2 Program
Audio: MPEG-1 Layer 2
I want to use Compressor to generate each as a separate file, then join them using MPEG Streamclip.
But I can't get Compressor 1.2.1 to generate a file that is audio-only. The audio file it creates also contains an MPEG-1 video track. Unfortunately, MPEG Streamclip combines this with my MPEG-2 video file and spits out... a single MPEG-1 video file.
What I want is an MPEG-2 video file containing an MPEG-1 audio track.
Has anyone done this using these two applications? Is this just a cakewalk for Compressor 2.0?

UPDATE: I need to explain better. Compressor does create an audio-only file. But it doesn’t seem to stay MPEG-1.
The summary for my audio-only file setting in Compressor says MPEG-1 Audio. When such a file is exported, it has the extension .m1a, and QuickTime Player identifies it as an MPEG-1 audio file. However, MPEG Streamclip identifies it as an MP2 audio file.
The result is that I get either a file with MPEG-2 audio and video, or a file with MPEG-1 audio and video. But I can’t mix the two.
Apparently, there is no easy way, using QuickTime or another application, to Get Info on all the info inside a muxed file.

How to read the data file and write into the same file without a temp table

Hi,
I have a requirement as below:
We are running lockbox process for several business, but for a few businesses we have requirement where in we receive a flat file in different format other than how the transmission format is defined.
This is a 10.7 to 11.10 migration. In 10.7 the users are using a custom table into which they are first loading the raw data and writing a pl/sql validation on that and loading it into a new flat file and then running the lockbox process.
But in 11.10 we want to restrict using temp table how can we achieve this.
Can we read the file first and then do validations accordingly and then write to the same file and process the lockbox.
Any inputs are highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Hello Gurus,
Let me tell you about my requirement clearly with an example.
Problem:
i am receiving a dat file from bank in below format
105A371273020563007 07030415509174REF3178503 001367423860020015E129045
in this detail 1 record starting from 38th character to next 15 characters is merchant reference number
REF3178503 --- REF denotes it as Sales Order
ACC denotes it as Customer No
INV denotes it as Transaction Number
based on this 15 characters......my validation comes.
If i see REF i need to pick that complete record and then fill that record with the SO details as per my system and then submit the file for lockbox processing.
In 10.7 they created a temporary table into which they are loading the data using a control file....once the data is loaded into the temporary table then they are doing a validation and updating the record exactly as required and then creating one another file and then submitting the file for lockbox processing.
Where as in 11.10 they want to bypass these temporary tables and writing it into a different file.
Can this be handled by writing a pl/sql procedure ??
My findings:
May be i am wrong.......but i think .......if we first get the data into ar_payments_interface_all table and then do the validations and then complete the lockbox process may help.
Any suggestions from Oracle GURUS is highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

User exits-- also ---synchronous and asynchronous struc..

dear all
pls. let me know the basics of user exits. i have gone thro williams iam unable to follow. does it require abap knowledge. i sincerely request one and all (experts) to let me know about user exits. it seems very imp as per interviews.
also what is synchronous and asynchronous structures whats the difference. can anybody share knowledge on this.
thanks in advance
regards

Dear Sekhar,
Please find the info regarding User-Exit's in the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Re: doubt on user exits
user exits and Badis
User exits is the enhancements provided by SAP
You can use them in transactions. Each transaction will have user exits.
If you want to use your own requirements by making your coding while the transaction is run you can use user exits.
For example if you want to run the MRP in MD02 specific to MRP controller you can user exit.
Please also refer the document below.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
All Userexits start with the word USEREXIT_...
FORM USEREXIT_..
z..
ENDFORM.
The problem lies in finding the correct userexit and how to find it if one exists for the purpose. Once the correct userexit is found the necessary customer code is inserted in the customer include starting with the z.. in the form routine.
e.g. USEREXIT_SAVE_DOCUMENT_PREPARE
Certain application like SD still provide this form of enhancement using userexit but this practice is no longer being followed for newer extensions instead they are using EXITs which come bundeled in enhancement packages . Neverthiless existing USEREXITS will be supported by SAP an all the newer versions of SAP.
HOW TO FIND USEREXITS
Userexits can be found in number of ways:
1) To find userexits in SD module , goto object navigator(SE80) and select
development class from the list and enter VMOD in it. All of the userexits in SD are contained in the development class VMOD. Press enter and you will find all the includes which contain userexits in SD for different functions like PRICING, ORDER PROCESSING etc. Select the userexit according to the requirement and read the comment inserted in it and start coding .
Some examples of userexits in SD(SALES & DISTRIBUTION ) are:
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields. The fields which are not in either of the two tables KOMK and KOMP cannot be used in pricing .Sometimes a need arises when the pricing is to be based on some other criteria which is not present in the form of fields in either of the two tables. This problem can be solved by using USEREXITS which are provided for pricing in SD. Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
USEREXIT_NUMBER_RANGE
This userexit is used to assign a different internal document number to the
sales order(VA01) when it is created depending on some criteria like a different SALES ORGANIZAION(VKORG) .
USEREXIT_SAVE_DOCUMENT_PREPARE
This userexit is used to insert the ABAP code which will be called when
the document (sales order VA01) is just about to be saved.This userexit is used generally for custom checks on different fields , to display some information before the order will be saved or for making changes to certain fields before the sales order will be saved.
Exits & Enhancements
There are mainly six types of EXITs in sap which have been collected in the form of enhancement packages and attached to standard code in SAP.
These are different from USEREXIT in the way that they are implemented
in the form of FUNCTIONs while in USEREXITS we use form routines for their implementation. These are also sometimes known as function exits .
These start from the word EXIT_ followed by the program name and then followed by a three digit number.
e.g. EXIT_SAPMV45A_002
This exit is found in SD in enhancement V45A0002.
TYPES OF EXITS
1)MENU EXITS
2)FUNCTION EXITS
3)TABLE EXITS
4)SCREEN EXITS
5)KEYWORD EXITS
6)FIELD EXITS
We use SAP transactions CMOD and SMOD to manage exits. Before implementing an exit , it is required to create the project by using CMOD
selecting the enhancement e.g. V45A0002 and selecting the component
(one which fulfills our need) i.e the exit which will be implemented in SMOD and after coding has been done the project has to be activated.
An exit can be coded only once.
FUNCTION EXITS
These are used to add functionality through ABAP code . These start from the word EXIT_programname_NNN ending in a 3 digit number. No access code is required to implement any tupe of exit including function exits.
The function exits are called from the standard SAP program in the form
of ABAP statement
CALL CUSTOMER-FUNCTION 'NNN'
This is in contrast to USEREXITs where PERFORM statement is used to call
the required userexit.
To implement the FUNCTION EXITs first of all the project is created and a suitable enhancement package is selected and from its compnents the function exit to be implemented is selected and on double clicking it the exit code will appear in ABAP EDITOR(se38) where a Z include will be found and the customer code should be entered in this include.
e.g.
ADDING A DEFAULT SOLD-TO-PARTY in Sales Order Creation
To show a default sold-to-party in this field when the user creates a sales order (VA01) we can use a function exit .This function exit is located in enhancement no V45A0002 . Before we can choose the exit we have to create a project in CMOD after that enter V45A0002 in the enhancement field and click on the components . In the components you will see the exit EXIT_SAPMV45A_002 . This exit is used for our purpose.
Double clicking on this exit will takes us to function builder (SE37) . This
function exit has one exporting parameters and two importing parameters, we are interested in exporting parameter which is E_KUNNR of type KNA1-KUNNR i.e if we move the desired customer name to this structure(E_KUNNR) it will be shown in the field as the default value when we create the sales order. This function also contains a customer include ZXVVA04 . This include will be used to write our custom code .
Double clicking on this include and it will prompt us that this include does not exists do you want to create this object ,select yes and the include will be created .In this include we can write our own code that will fill the field E_KUNNR.
e.g. E_KUNNR = 301.
Activate the include and Activate the project. Now when ever the SALES ORDER will be created , sold-to-party field will come up with a predefined customer .
FIELD EXITS
The field exits are managed,created,activated through program RSMODPRF. The field exit is associated with a data element existing in ABAP dictionary and hence to the screen field using that data element.
The format of field exit is :
FIELD_EXIT_dataelement_A-Z or 0-9
If a particular screen and program name is not specified than the field exit will effect all the screens containing that data element.
The function module associated with field exit shows two parameters
INPUT and OUTPUT. Input parameter contains the data passed to the field exit when the field exit was invoked by the R/3 , We can write our own code to change the output parameter depending upon our requirements.
Before the field exit can have any effect the system profile parameter
ABAP/FIELDEXIT in all the application servers should be set to YES
ABAP/FIELDEXIT = YES.
Regards
Naveen.

Sender File Adapter picking the same file twice

We are facing a weird issue with File Sender Adapter
We are using PI File Adapter ( NFS ) to read files for a NFS folder and
processing those in PI.Normally it works fine. But for a scenario we
are noticing it sometimes process the same file twice before archiving,
thus duplicating the financial postings.
What we have is :
File Sender Adapter - NFS, Polling interval 60 secs, and Processign
mdoe Archive. File name includes Wildcards - JE_Upload*.txt
what we are noticing is that :
when it picks up a file, it immediately polls again to check for
another file, and sometimes the file is not yet archived so it picks up
and reprocess the same file.
If you see the message below, both belong to the same file, and it
picked up the same file again in 12 secs after processing it the first
time
Successful 02.11.2009 15:01:00 02.11.2009 15:01:01 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Successful 02.11.2009 15:00:49 02.11.2009 15:00:50 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Anyone seen this behavior before?

Hi,
Please check the script which creates file in source NFS Folders. There is possibility that script is making change in file when PI is picking up the file.
When PI picks the file first time it creates one message ID in system. After that if script is making any change in file without file name change (This need not necessary data change), for PI it becomes new file and new message gets generated in PI for same file.
This error normally comes when File adapter is not able to archive file succesfully. For eg. file with same name alredy exists in Archive folder.
File adapter generates the new message id whenfile get modified(eg.change in its length or data change) even though
the file name is same and when file get change ,XI file adapter thinks that its new file and hence generate the new message id for same file.
If file has same name and notmodified then XI adapter will not generate new message id and will keep on throw the error till you remove that file with same name from the
archieve directory.
-Warm Regards,
Gouri

File Adapter does not process the same file twice

SOA: 11.1.1.4 (non-HA).
I have a file adapter that triggers when a new file gets to a directory; the file is not deleted after the process triggers.
The process is supposed to call other services via a mediator and if any remote fault happens it should rollback automatically and re-trigger with the same file at the next polling interval.
I have literally 3 scenarios:
1). The file gets picked up once, the process fails and the file is never picked up again.
Msg in log: The file : /xx/xx/xx/abc.xml is being ignored as it has already been processed
2). If the mediator only routes to one service after the file gets picked up, it works as expect (that is rollback and restart at the next polling interval). If it has more than one sequential routing rule, I see the same error as above.
3). File does not get picked up EVEN if I "touch" or rename the file.
Msg in Log:
File Adapter ProcessName Poller enqueuing file for processing :/xx/xx/xx/abc.xml
File Adapter ProcessName Ignoring File : abc.xml as it is already enqued for processing.
I have already checked, there is no permission issue.
This is what my .jca file looks like:
<adapter-config name="getFile" adapter="File Adapter" wsdlLocation="getFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="*"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.ScalableFileActivationSpec">
<property name="DeleteFile" value="false"/>
<property name="MinimumAge" value="5"/>
<property name="SingleThreadModel" value="true"/>
<property name="PhysicalDirectory" value="/xx/xx"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="20"/>
<property name="IncludeFiles" value=".*"/>
<property name="UseHeaders" value="true"/>
<property name="MaxRaiseSize" value="5"/>
<property name="ListSorter" value="oracle.tip.adapter.file.inbound.listing.TimestampSorterAscending"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
Thanks for looking into it in advance.
Any help with the error messages will be appreciated.

You have to use MOVE operation, if there is any remote exception occured, then move the file to someother folder and again move back to the same folder where the file pickup will start.
In that way you will be use the same file picked up next time when the polling happens.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay

Why does viewing the same file in two diff. versions of Photoshop give diff. results?

Hey,
Our designers use CS2 for their work. All of the designs that they work on are in black and white. When the same file is opened at a given zoom %, the files seem to have a different view for CS2 and CC. The print size ofcourse is the same, but our work involves viewing designs of 700 dpi at 3-5% and the difference in viewing the same files matters.
We want to upgrade our software, because CC is way better in so many other functions but this is the only thing that is stopping us from doing so. Please let me know if there's a way to fix this or is it just something we have to accept with the upgrade.
I will share screenshots of both the version with the same file soon.
Thanks.

Thanks for the suggestion, Chris.
Same issue, new question - don't ask me why I did this, but while both Photoshop and the now corrupted file were open, I changed the name of the folder containing the file, then continued to save the open version of the file without first closing it and reopening it from the newly renamed folder. Could this have caused both files in that folder to become corrupted in different ways? The other file that gives me the "file is empty" error was not open at the time, but it was in that folder. I'm thinking maybe by changing the path to the files while Photoshop was running, that could have triggered this. ?? I have 3 1TB internal drives raided to read as 1 drive, so I'm really hoping that one of these disks is not dying on me as you suggested. I was also backing up an external drive using BackBlaze when this all occurred - any possible connection? How can I find out if one of my three raided drives (and which one) might be going bad?
Thanks!!

Corrupting files when 2 premiere stations accessing the same file

I'm working on a Shared Unity RAID system in a post house. When 2 Premiere stations are accessing the same clip, the clip temporarily corrupts, and i get the "Unsupported format or damaged file" error. The file returns to normal one one machine is using it. Certainly not optimal for simultaneous projects. Can this be worked around? Mac based, OSX Version 10.8.4 on Premiere CC

Anything other than Anywhere is not designed to work over a network, and certainly not on the same file at the same time (I don't need/use Anywhere, so I don't know if it will let two people work on the same file at the same time)
Premiere doesn't work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-#5 Server 2008 is UNsupported http://forums.adobe.com/thread/851602
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-http://helpx.adobe.com/premiere-pro/kb/networks-removable-media-dva.html

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

Problem with SQL*Loader and different date formats in the same file

DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
System: AIX 5.3.0.0
Hello,
I'm using SQL*Loader to import semi-colon separated values into a table. The files are delivered to us by a data provider who concatenates data from different sources and this results in us having different date formats within the same file. For example:
...;2010-12-31;22/11/1932;...
I load this data using the following lines in the control file:
EXECUTIONDATE1 TIMESTAMP NULLIF EXECUTIONDATE1=BLANKS "TO_DATE(:EXECUTIONDATE1, 'YYYY-MM-DD')",
DELDOB TIMESTAMP NULLIF DELDOB=BLANKS "TO_DATE(:DELDOB, 'DD/MM/YYYY')",
The relevant NLS parameters:
NLS_LANGUAGE=FRENCH
NLS_DATE_FORMAT=DD/MM/RR
NLS_DATE_LANGUAGE=FRENCH
If I load this file as is the values loaded into the table are 31 dec 2010 and 22 nov *2032*, aven though the years are on 4 digits. If I change the NLS_DATE_FORMAT to DD/MM/YYYY then the second date value will be loaded correctly, but the first value will be loaded as 31 dec *2020* !!
How can I get both date values to load correctly?
Thanks!
Sylvain

This is very strange, after running a few tests I realized that if the year is 19XX then it will get loaded as 2019, and if it is 20XX then it will be 2020. I'm guessing it may have something to do with certain env variables that aren't set up properly because I'm fairly sure my SQL*Loader control file is correct... I'll run more tests :-(

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

Synchronous and asynchronous IO on the same file descriptor

Similar Messages

Maybe you are looking for