Synchronous Nonrowset response message to 3rd Party

I've created a synchronous non rowset based message. I believe that my set up is correct and my request/response schema are all working as expected. I have PeopleCode in an Application Package that retrieves the data that I want. When I run this via sendmaster, I am able to get the data that I expect and it's in an XML format but I'm kinda stuck. I need to know how I get this data into the format of the Response schema withoug having to manually "build" it in an XML layout? Shouldnt I be able to "pull in" the response schema and then populate that schema according to the elements associated with it? I may be totally off on this, but that's the way I think it should work. Can someone clarify and if you have an example of a response message that is uses an existing schema, that would definately help.
thanks
Rich

Exactly... The XML response via sendmaster is because I am manually formatting it in the Application Package peoplecode. I want to return it in the form of the response xml schema that is tied to the repsonse message.

Similar Messages

  • Synchronous FTP response message

    Hi,
    I am new to XI, so would welcome some advice.
    I have implemented an interface from ECC5 via abap proxy to XI FTP adapter to send files to a third party.
    I am using a synchronous interface to check the ftp has been successful.
    Because of it being synchronous, I must give a response message type.  But as this response is empty, the mapping back is failing.
    So, can I have a synchronous interface without a response, or can I fill the response from the FTP action, and if so, how ?
    Thanks
    Paul

    I am using a synchronous interface to check the ftp has been successful.
    1) FTP receiver cannot be used in a SYNC mode.
    2) If your intention is only to check if the connection was established successfully between PI and FTP and the file was transferred successfully then you can see that from status in Runtime Workbench --> Adapter Engine --> Channel MOnitoring.
    You dont need to do this manually (even though you can), you can set alerts which can raise an error message in case if anything goes wrong....this is a standard practice followed....no need to make the process SYNC.
    If your requirement is to check if the file has been processed successfully by the FTP server then you need to implement a process similar to the one explained by Holger.

  • IDOC send message to third party system

    Hi,
    I got the below scenario,
    1) Data came from 3rd party system through EDI
    2) Because the material is not there in SAP system it didn't create sales order
    3) IDOC is errored out
    4) How to inform the 3rd party system through an IDOC or message that IDOC got errored out?
    Thanks
    anikaushi

    so you mean to say that we can trigger workflow sothat those people or email.
    Yes, for error handling and resolution
    Can we send the eror message to 3rd party in the form of IDOC immediately afer error IDOC is created in SAP?
    You could, but I don't see the point and you'd have to map it.  Your EDI system should provide an FA back to the sender upon receipt so that it knows the message was received.  The error should go to the person or group that would handle the issue if it's an SAP-related issue such as a master data or config error.  I don't know your system/setup, but it doesn't make sense to send a material error back to the sender system if someone is going to fix that in SAP and then re-process the IDOC (and trigger an order confirmation).

  • I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. What happened?

    I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. The artist is listed as Apple Inc. What happened?
    This is the message I received:
    Your video may include the following copyrighted content:
    Disputed claims 
    "Kadeem UIM-Trust Issues (Instrumental)", sound recording administered by:INgrooves Your dispute awaiting response by 12/08/12
    What does this mean?
    After your dispute has been submitted, your video will soon be available on YouTube without ads for third parties. This is a temporary status and might change at any time.Learn more about copyright on YouTube.

    This question comes up from time to time. YouTube and Facebook are both wrong.
    There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
    “You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
    http://images.apple.com/legal/sla/docs/ilife09.pdf
    You should this (also providing the above link) when following the dispute process with YouTube.

  • How do i print sms messages from my iphone without a 3rd party app?

    How do I print a complete SMS message from my iphone without using a 3rd party app?

    If you have an AirPrint compatible printer, or you have a print app, then you could take a screenshot of each page of the message and then print them. Otherwise, there is no native solution to print SMS messages on the iPhone.

  • Hi: My wife has mail sent from a 3rd party email account. When she attempts to trash these emails 2 things happen. The message goes in the trash and an error message happens..Trash-home email. Operation could not complete. File exists.

    Thanks in adavnce for any help you can offer to solve the above issue with Mac mail on my wifes' MacBook.
    Michael Stryker

    Hi:
    I should also mention thatthe issue is with Mac Mail, which is where the messages are being forwarded to from the 3rd party email account.,......sorry for any confusion.
    This is a problem that cropped up recently, i.e., previous to the past couple of weeks, she had no issues with trashing email.
    Thanks,
    Michael

  • Problem accessing value of response message of synchronous call in BPM

    Hello,
    I've a problem with a synchronous sending step (in BPM) and a following container operation.
    In the message monitoring I can see the right response of the sending step. But the value of the container is empty.
    If I navigate from the container of the sending step to the message, I can also see the right message.
    But I can't access any elements in the message, they will be ignored.
    Here is the response message:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <ns0:Envelope xmlns:ns0="http://xmlns.bp.com/UEHReply" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    - <ns0:Header>
      <ns0:Event businessDocRef="" component="VEST" domain="MyPoCVest" id="" objectPayloadRef="" timestamp="" />
      </ns0:Header>
    - <ns0:Body>
    - <ns0:ObjectPayload id="" version="">
    - <ns0:uehReply version="2.0">
    - <ns0:component type="BUSINESS">
      <ns0:name>VEST</ns0:name>
      <ns0:application>Vest</ns0:application>
      </ns0:component>
    - <ns0:exception id="0" type="">
      <ns0:triggerMsg format="" />
      </ns0:exception>
      <ns0:detail />
      <ns0:resolutionOption>WAIT</ns0:resolutionOption>
      <ns0:nextChoice>NONE</ns0:nextChoice>
      </ns0:uehReply>
      </ns0:ObjectPayload>
      </ns0:Body>
      </ns0:Envelope>
    And the XPath statement, to get the value:
    /p2:Envelope/p2:Body/p2:ObjectPayload/p2:uehReply/p2:resolutionOption
    Someone an idea?
    Cheers
    Daniel

    Hi ,
    I am facing similar problem , in case you have a resolution about the FAX number , then please let me know .
    Thanks,
    Abhishek
    ([email protected])

  • Synchronous Receiver JDBC adapter--response message empty

    My scenario is ABAP Proxt to JDBC synchronous case where I am calling a stored procedure "GetEmployer" to get the relevent data. There is no input data to the stored procedure, just need to call the stored procedure to return the records.
    In the SXMB_MONI I am getting the response message as empty with no records.
    In the communication channel monitoring it is showing successfully processed.
    Request Message :
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_IRIS_SELECT_JDBC_REQ xmlns:ns0="XXXX">         <STATEMENT>
    <GetEmployer ACTION="EXECUTE"></GetEmployerList>        </STATEMENT>                      </ns0:MT_IRIS_SELECT_JDBC_REQ>
    Response Message:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_IRIS_SEL_PRXY_RES xmlns:ns0="XXXX"> <STATEMENT_response></STATEMENT_response> </ns0:MT_IRIS_SEL_PRXY_RES>

    Hi All,
              If I am trying to test the configuration in the ID I am getting the following error.
    Runtime error      Unable to read the payload from the     message object 
    <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
    <Trace level="2" type="T">......attachment XI_Context not found </Trace>
    <Trace level="3" type="T">Mapping is already determined in the interface determination </Trace>
    <Trace level="3" type="T">Object ID of Interface Mapping 35933EB051F13E60906107DF6862E093 </Trace>
    <Trace level="3" type="T">Version ID of Interface Mapping 640C5B80B54311DCABA9F7BB0A126A22 </Trace>
    <Trace level="1" type="T">Interface Mapping http://XXX/employer_list</Trace>
    <Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_EMPLOYERLST_ </Trace>
    I am getting the success flag in SXMB_MONI but getting no records in the JDBC response message. It is not throwing any error and the interface is running successfully.
    Could you please suggest some solution for this.
    Thx in advance
    Ravijeet Das

  • Response message back to Third party vendor webservices

    Third party vendor sends messages to a webservice. The SOA application takes the message and puts it into a JMS topic through a mediator with asynchronous interface. All good so far, the system now needs to send a response back to the third party's webservice saying the message processing failed or was successful. For mediator, there are two concepts callback and response. What is the difference between callback and reponse. Which one should I use to send response message back to third party. Do I need OSB for this?
    Please suggest the approach for getting this implemented. I am fairly fresh to the SOA components and appreciate help in this regard. I hope I am making sense, if not feel free for more clarification. I am struck on this for atleast a week now.
    Thanks

    I am using the mediator component which does callback and response as per the SOA user guide. I am not sure, while sending response back to third party, should I be using callback or response. There are no use cases for asychronous interaction using jms topics in Oracle samples examples also.
    Looking forward for some help or suggestions
    Thanks

  • JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

    Hello Experts,
    I tried this step in creating a synchronous scenario by using steps found in this site -> [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29] I just changes File to JDBC. But problem is I see the sent XML message in SXMB_MONI but to response message. I also can't see the Sender interface name for the response message when I tried to use F4 in the Interface Name portion.
    Do someone encountered this before? Please help
    Regards,
    Alfred

    Hello,
    I hope someone could guide me on how to set this up cause I only see the sent message but there's no response message in SXMB_MONI. Note that interface was successful, I just want to see what was sent by the response.
    Regards,
    Alfred

  • Permanently deleting iPhone text messages... impossible without 3rd party software?

    Am I correct in assuming there is currently NO possible way to permanently delete iPhone text messages and attachments unless you without either A. using 3rd party software that costs loads of money, or B. completely wiping your phone? This is seriously not available on these phones with all the other advanced features and tech?
    It saves gigs of txt messages and attachments permanently that takes up all of the space on your phone... I just have a hard time believing this issue hasn't been addressed....

    If the amount of storage for your Messages is not decreasing when you delete some (or all), then you need to try resetting your device to see if it will clear it up. I just went to my device and checked the amount of storage being used by Messages (13 MB). Then I deleted the 6 messages I had, and went back to check the Usage. It is now 3 MB.
    To reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen displays, check your usage again.
    Cheers,
    GB

  • 3rd party programs cannot alter message tones

    Hi, I have installed UltimateSMS and also Symbianon's SMS guard. Both programs could make individual messagetones on my older E50, but not on my E51. Is it not possible to change the message tone through 3rd party applications on E51?

    Hi, I have installed UltimateSMS and also Symbianon's SMS guard. Both programs could make individual messagetones on my older E50, but not on my E51. Is it not possible to change the message tone through 3rd party applications on E51?

  • Is message persistance with 3rd party queues implemented?

    Is message persistance with 3rd party queues implemented for 9.0.2 or 9.0.3 prev?
    I am not able to use Oracle JMS and want to try implementing this.
    Documents on how to implement this would be helpful.
    thanks,
    Isaac

    OC4J 9.0.2 is certified with few JMS providers like MQSeries, SonicMQ, SwiftMQ, etc. Please look at the Services Guide that documents how to use 3rd Party JMS providers.
    regards
    Debu

  • Some 3rd party installs fail giving error message. why?

    Some downloaded 3rd party software fail to install, giving an error message similar to "file specified when folder required". The last time this happened the error # was 17530. Why does this happen and how to fix it?

    It is probably something the 3rd party software is trying to do.  What is the software?
    Try Google searching for "<program name> fails to install with <your error> Mac"

  • I have a message on my Ipad that my IOS has crashed due to a 3rd party. It gives a number to call for support. It has locked up my Safari. What can I do to get rid of it?

    I have a message on my Ipad that states my IOS has crashed due to a 3rd party. It refers to my tablet as a phone (sorry, don't have an Iphone. It gives a number to call for support but I know it's a scam. Is there a solution to get rid of it as it has locked up my Safari.

    1. Reset the iPad
       Press and hold the Sleep/Wake button on your iPad,
       simultaneously  press and hold down the “Home” button” until the screen turns off.
       Turn it back on.
    2. Clear information from your device
       iOS 7
       Tap  Settings > Safari > Clear History > Clear Cookies and Data.

Maybe you are looking for