JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

Hello Experts,
I tried this step in creating a synchronous scenario by using steps found in this site -> [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29] I just changes File to JDBC. But problem is I see the sent XML message in SXMB_MONI but to response message. I also can't see the Sender interface name for the response message when I tried to use F4 in the Interface Name portion.
Do someone encountered this before? Please help
Regards,
Alfred

Hello,
I hope someone could guide me on how to set this up cause I only see the sent message but there's no response message in SXMB_MONI. Note that interface was successful, I just want to see what was sent by the response.
Regards,
Alfred

Similar Messages

Where can we see the SRW.MESSAGE

Hi
I am new to Oracle Reports. I have a report developed in EBS and it has SRW.MESSAGE statements. After the report is run where can I see the log of these messages. Can some help.
Thanks

Hello rajesh as you told that the cost esimate is deleted.
Then there is no way to see the cost estimate.
You canonly see the cost esimate in CK40N or in CK13N but you can not see the itemiaxation of that material for ehich we create the cost estimate.
Hope it will clear you
IF this informetion is usefull for you please assign some points
Regards
Ravi

How can i see the error message?

hi, i have written a procedure in the database 10g, with my own error, and it works. but, when my exception occurs, i want to see my ora-20000-message in the footer of the isql-screen in the same way like normal ora-errors do it. because, now the code handles the exeption, but i can not se any message.
thx.
(zahl1 in number, zahl2 in number)
as
maxvertrag number;
ergebnis number;
myerror exception;
pragma exception_init(myerror, -20000);
begin
select max(vertragsnr) into maxvertrag from robertl.tblugovor;
ergebnis := zahl1+zahl2+maxvertrag;
if ergebnis>104
then
RAISE_APPLICATION_ERROR (-20000, 'Result is > 104!');
end if;
exception when myerror then
ergebnis:=0;
end;

This is answered in how can i se the error message?.
As a side note, you generally don't need to cross-post in these two fora, as many of us frequent both.
Cheers, APC

3 People Can't see the same messages in a Shared Mailbox

Three of us at work monitor our Boss' shared mailbox (demanding VIP). We all have the same permissions.
It has become insanely common that collectively we do not see the same "Inbox" messages for our boss.
Generally we see the bulk of the email.
On increasingly frequent ocassions: A & B see message X (C doesn't see it in the INBOX)
or A & C have message Y (B Doesn't see)
or B &C see message Z (A doesn't see)
Collectively A has - X & Y
B has - X & Z
C has - Y & Z
The content is all there but someone always seems to be left out.
It is really leading to some confusing conversations and mismanagement of activities in our office. Especially when the Boss asks C (the only person left at work) why the boss didn't get something about message X (of which C cannot see).
How do we fix this?
Summed up: A shared mailbox with equal permissions is not displaying the inbox equally across those it is shared with.
Filters are turned off/not active or otherwise not part of this problem.

Hi,
Does the issue only happen on the Boss’ shared mailbox? How about other shared mailbox? Also confirm whether the issue occurs in OWA view.
Please try to remove all share permissions on Boss mailbox and re-add one user to check whether the user can view all emails in shared mailbox. If there is any Event log, it would be helpful to post it here.
Thanks,
Winnie Liang
TechNet Community Support

How do can we see the iplanet messaging server statistics?

I need to know how many emails our iplanet messaging server is processing per day/month/year etc and the volume of data that this represents. How can I read the logs? Is there a tool for doing this?
Thanks
Paul

The imap, pop, and http processes have counters, as does the MTA. Check out the manual for the command line utlities for iMS.
As for the MTA logs, the format is documented and thus you can easily write your own tool to parse and report on what you need. I did it years ago and I would share that with you but it has fallen behind in the format and thus needs serious updating.
There is no built in tool to process log files.

Can't see the received messages in inbox

i use nokia n70.now im not able to see some messages send by one or two numbers.In log it is showing tat i hav received msg but i cant see it in inbox...
plsss can anyone help me ..

MAIL is in sync with GMAIL (forgot to add this info).

I can't see the picture messages I send

Whenever I send a picture message to someone, it appears on my phone as a blank message (the same thing as sending a 'space' to someone). The recipient still receives the message though. Anybody else have this problem and have a possible solution. I've tried turning the phone on and off, turning iMessage on and off, and also I've tried reseting the network settings. Nothing has solved the issue so far.

Hi codys6,
Thanks for visiting Apple Support Communities.
If you are not able to see picture messages you send to contacts, you can find some additional troubleshooting tips that may help in the "To resolve issues with sending and receiving MMS,..." section of this article:
iOS: Troubleshooting Messages - Apple Support
All the best,
Jeremy

Can only see the video message -no video call ?

Why is there no video call button only video message.

the video calla button will be availbe if the contact you want to video call is current online.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Sending form via email - can't see user responses in returned PDF

I created a form in Form Central. I chose "save as PDF form" and saved it on my computer. I attached this form to an email and asked employees to fill out and send back to me as a pdf. When people email me back their filled in form, I can only see the responses when I click on each individual box. When I print the form, the responses do not print.
Would appreciate help since I distributed the forms to the company, and realized there was a problem as responses started to come in today (I only tested it on my computer and had no issues)
I would appreciate any help you can give. Especially:
Why is this happening?
How do I prevent this in the future?
Is there anything I can do to resolve the issue, without having to send out an updated form?
Christine

The users filling out your PDF are not using Adobe Acrobat or the Free Adobe Reader to fill out your form - FormsCentral forms have to be filled out in Adobe Reader or Acrobat.
Also, make sure that you are also using Adobe Reader or Adobe Acrobat to view those PDFs.
The way to resolve this is to instruct your users to use Adobe Reader to fill out the form.
This FAQ touches on the issue, but mostly related to the Submit button not working, however the issues you describe are caused by not using Adobe Reader or Acrobat as well: http://forums.adobe.com/docs/DOC-2653
Thanks,
Josh

Where can I see the error msg in the below code.

Hi Gurus,
Please have a look at the code.
 if abc is initial.
 return-message = cl_bsp_runtime=>get_otr_text( 'ZXYZ/ERR_EMPID' ).
 append test to test_tab.
 endif.
In the above code, Emp id input field is being checked as its mandatory. I would like to know where can I see the error message per the above code. what is get_otr_test??

go to SE63 and see it from there..
SE63-> Translation->OTR Objects->Short Text
in field Package key in 'ZXYZ'
and in field Text from OTR key in 'ERR_EMPID'
and go forward.
I hope this helps.
For more info see the link below
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/6ad43aa654be55e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/93/bccd3a00746f4ae10000000a11402f/frameset.htm
If useful answer..reward points and close the thread.
A.

Client Proxy to JDBC synchronous Scenario

I'm using Proxy--PI---JDBC synchronous shcenario, when i execute the proxy from R/3 it is giving me error "RCVR_DETERMINATION.NO_RECEIVER_CASE_BE" in configuration i have used one inbound receiver determination for request, my question is do i need to have one more reciever determination for response.
Thanks for help.

No, you do not have to add additional receiver determination
Usually in sync scenario, make sure you have one receiver determination, no arbitration.
If you have condition for receiver detemination, make sure the condition only return one true.
Liang

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

Synchronous scenario: How to be sure that messages don't get lost?

Dear all,
my scenario is split into two parts:
SAP -> PI : We received a RFC (without sending a response) and split the message into single
files that we saved on PI filesystem
PI -> WS: We send the messages to a web service.
But because we read it from file system I am not quite sure how to handle this. If the
web service is not available a normal synchronous web service message is normally stopped
and can not be restarted. How can I be sure, that the message will not getting lost?
The only way I could see is the support that see the erroneous message an inform the business.
Is it possible to automate the process if the web service is not reachable?
If the web service sends an error code, I can handle this with conditions in receiver determination,
but technical problems will just stop the message, wouldn't it?
Regards
Chris

Hi,
Syncronous messages once failed in PI can not be restarted . To inform business you can use several options :
1. Use Interface specific alert so that when the particular interface fails alert will be triggered and sent to respective recipients.
2. You can also right the ABAP report which sends the emails with payload for the messages which have failed . You can also shedule this report as per your need .
Regards,
Ganesh

Spool file problem,Can't see the query in output file.

Hello ,
I am facing a very old school kind of problem .....about spool file ....
The scenario -
I have made a script by name DB_Status_checkup.sql which i want to fire on the database to check the database status. In this script their are many queries regarding the data dictionary views to know about the database. It consist of nearly 25-30 different select queries..
The problem is i want to make a spool file of the output of that query....i want to see the SQL query & the output below in the spool file, so it will be easy for me to judge the result. But i can't see the SQL query , i can only see the output , & in so many queries it all gets jumbled up....even i can't understand where the next output starts ...
Sample of my SQL Script ....
clear buffer
spool D:\DB_status.txt
/*To check the database startup time*/
Select to_char(startup_time, 'HH24:MI DD-MON-YY') "Startup time"
from v$instance
.........next query n so on....
spool off;
In the output pf the spool file at D:\db_status.txt..
Startup time
08:25 16-JUL-10It shows only the output of the query in the spool file not the query,
What should i do to get the SQL query as well as the output of that query just below it in the spool file ???
Please suggest if you have anymore ideas , regarding this .....
ORACLE 10g R2
Windows Server 2008
Thanks in advance ...

Why don't you just use database control, instead of re-inventing the wheel?
Apart from that, SQL*Plus has it's own reference manual, which you apparently refuse to read.
The answer to your quiz/doc question is
set echo on
Sybrand Bakker
Senior Oracle DBA

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

Similar Messages

Maybe you are looking for