Hi: My wife has mail sent from a 3rd party email account. When she attempts to trash these emails 2 things happen. The message goes in the trash and an error message happens..Trash-home email. Operation could not complete. File exists.

Thanks in adavnce for any help you can offer to solve the above issue with Mac mail on my wifes' MacBook.
Michael Stryker

Hi:
I should also mention thatthe issue is with Mac Mail, which is where the messages are being forwarded to from the 3rd party email account.,......sorry for any confusion.
This is a problem that cropped up recently, i.e., previous to the past couple of weeks, she had no issues with trashing email.
Thanks,
Michael

Similar Messages

New problem again, This operation could not completed as there's no video

I don' t understand what is the problem, I work with FCP 6.0 and Quicktime 7.4.1 very well until today, when I tray to capture from DV devices ( note that the capture window says PREVIEW DISABLED , but I can remote the camera, mark tc in , out FFW REW etc, message VTR IS OK) The capture is aborted with this message THIS OPERATION COULD NOT COMPLETED AS THERE IS NO VIDEO, when I tray to capture from JVC PRO HD there is no problem. ANY IDEAS????? I'm not work whit another FCP version because with other version there is a problem with JVC PRO HD DEVICES . I note that I'm not the only one with this problem, another curiosity is that at this mooring I capture a tape without a problem but with the second tape start the problem when I thread the tape. Who is possible that the problems are like a miscellanies problem. In the system profile the Camera and vcr dv appears connected to the mac. The fire wire is ok.
<Edited by Moderator>

Hi of course I use the correct easy setup,Ii tray with different cameras, vcr's, vtr's, dv , Dvcam, I tray with different fire wire etc. Note that "IMOVIE" capture material without problem, same tape, this problem is affected to other people, included me , but for week i no have this problem with FCP 6.0 and Quicktime 7.4.1 this problem starting to day in the middle of the batch capture, the first tape was captured , but in the second tape start the message, WAITING FOR TIME CODE, THE DEVICE MUST SET IN VTR MODE, of course that this two things are ok, and appears then message "This operation could not completed as there's no video" Note that quicktime pro is unable to capture material from DV device too. Imovie work OK with the same camera and vtr and the same tape. The problem is quicktime and FCP.
http://discussions.apple.com/message.jspa?messageID=7418664#7418664
http://discussions.apple.com/message.jspa?messageID=7390713#7390713
http://discussions.apple.com/message.jspa?messageID=7365555#7365555
http://discussions.apple.com/message.jspa?messageID=7344941#7344941
http://discussions.apple.com/message.jspa?messageID=7335764#7335764
http://discussions.apple.com/message.jspa?messageID=7335763#7335763

Im trying to sync photos from my mac to my iPod nano 3rd generation, and an error keeps coming up that says "format could not be converted". How do I fix this?

Im trying to sync photos from my mac to my iPod nano 3rd generation, and an error keeps coming up that says "format could not be converted". How do I fix this?

Hi newipoduser,
Here are some possible solutions:
Do you use musicmatch jukebox on your computer? If you do, you have to go into task manager on windows and end process mim.exe. It interferes with disconnecting ext devices
Empty your "trash/recycle bin."
If that doesn't work, try quitting all your programs, especially music-type programs, basically things that look for mp3's etc.
if that doesn't work, "log off" then "log on" and that should refresh/purge your OS system.
Finally, you can restart your computer.
Hope one of these helps!
Cheers,
GB

Error installing DS 4.0: "previous operation did not complete"

When I try to install DS 4.0 I get the following error:
Installer has detected that a previous operation did not complete. Do you want to resume?
I had previously installed Information Platform Services 4.0 but the install crashed. Now I am unable to uninstall IPS and I can't install anything else. ( trying to uninstall IPS from Programs and Features just blinks and then doesn't do anything)
Has anyone faced this issue? Can someone PLEASE tell me how to uninstall IPS and/or circumvent the error so I can get DS installed?

I had the same problem a while ago. I solved this by
1. Go to folder C:\Program Files (x86)\SAP BusinessObjects\InstallData
2. Under this file you'll find "InstallManifest.sqlite" file. You need to open this file through SQLite editor. You can download it https://addons.mozilla.org/en-US/firefox/addon/sqlite-manager/ as an add-on to your firefox.
3. There are 13 tables in this database. Go to "DUTransaction" table. You will see "Committed" column change the value if there is any zero 0 value to 1.
4. Save and close the file.
5. Restart your installation.
This should solve your problems.

Outlook 2007 - Outgoing mail server from a 3rd party

I tried to set up the outgoing mail server for my Outlook 2007 with a 3rd party mail server. e.g. mail.xxxx.com, and I could not send the e-mail at all. If I set up the outgoing mail server as outgoing.verizon.net, I can send the email to everyone else but not to this 3rd party mail server mail.xxxx.com. I received the undeliverable message from Verizon that the mail was rejected due to not being able to log on to this 3r party mail server. I am working for this company from home and it requires me to set up this for my outgoing mail server. Does anyone know how to fix this, including specifying what needs to be done at the 3rd party mail server to change to accept emails sent from outgoing.verizon.net? Thank you in advance. Andy

Port 25 is the standard for SMTP, although some now use a submission port, 587. I know port 25 off network is blocked for residential users, I don't know if 587 is blocked off network because I have never tried it. I suspect it is. Verizon is by no means the only ISP to do this.
Business accounts do not have blocked ports as far as I know, so if you have a business account, you are free to communicate using port 25 anywhere.
Verizon has recently gone to non-standard port assignments for SMTP and POP servers. see
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Setup+And+Use/QuestionsOne/124289.htm?CM...

I am trying to update my ipad 4.3.5 using the update update button in itune and i'm prompt with "Ipad update software server could not be contracted.....

The Ipad software update server could not be contracted.
Make sure your network setting are correct and your network
connection is active, or try again later.
I have no problem going internet on the same PC.
Itune software "check for update" also no problem.
Just cannot upgrade Ipad IOS...
Please help.
Thanks!

Hi Ralph9430,
Turning OFF the virus and windows firewall didn't improve the situation.
I still receive the same error message
The Ipad software update server could not be contracted.
Make sure your network setting are correct and your network
connection is active, or try again later.
I have set my network as home network and subsequenctly to public.
Both turn to update but same error message as above.
Anymore advise...
Appreciate if anyone can help.
Thanks!

Operation Could Not Be Completed: Too Many Open...

I've had this error showing up a lot in the Safari 3.2 and 4.0 beta activity window when loading multiple tabs of pages with many images (usually gallery type pages or blogs with lots of thumbnails). The result is that some images or other elements like style sheets don't load, leading to the blue question mark, or messed up formatting. Unfortunately, the activity window can't be stretched wide enough to see the whole error, but in fact it's "Operation Could Not Be Completed: Too Many Open Files". The error "socket(PF_ROUTE) failed: Too many open files" shows up in the Console as well, at least with Safari 4. I had also experienced similar problems with "Operation Timed Out" errors as well.
I've been pulling my hair out on this one, because it's rather inconsistent, not to mention annoying. You can usually get an individual page to load completely by refreshing it, but that kind of defeats the purpose of loading multiple tabs all at once. It's also less of a problem if more of those pages are already cached, but you never know for sure. Running your connection through a proxy also helps a bit, but not always.
I found a fix, but it's actually not Safari's "fault" per se. The issue lies in the allowable number of open files per user process, which is set by the system's launchd process at boot time. Note that Safari is not entirely innocent, as FireFox doesn't have this problem. It Seems that Safari just tries to load everything all at once, whereas FireFox does a better job of managing its load requests. Anyway if you run the following command in Terminal:
sudo launchctl limit
the following list should show up (with perhaps slightly different values)
cpu unlimited unlimited
filesize unlimited unlimited
data 6291456 unlimited
stack 8388608 67104768
core 0 unlimited
rss unlimited unlimited
memlock unlimited unlimited
maxproc 200 532
maxfiles 256 unlimited
The second column is a "soft limit" and the third column is a "hard limit", though to be honest I'm not exactly sure what the difference entails. The image loading problem is caused by hitting the maxfiles limit of just 256 files. The solution is to change maxfiles to 4096/unlimited, and also change maxproc to 1000/2000 since it's pretty low as well. That sounds like a pretty big change, but OS X server is supposed to change them to numbers like this when services like Apache are enabled, and Apple even mentions how to change maxproc at http://support.apple.com/kb/TS1659
To make these changes, run the following two commands in Terminal and restart the computer:
echo "limit maxproc 1000 2000" | sudo tee -a /etc/launchd.conf
echo "limit maxfiles 4096 unlimited" | sudo tee -a /etc/launchd.conf
The commands add the two lines in quotes to the launchd.conf file in /etc/ (if no file exists yet, it creates it). That should clear up the loading issues. I haven't noticed any other problems with these increased numbers, but I'll report back if anything seems to go amiss. Hopefully this will be helpful to someone.

I faced the same problem with an image gallery using css for image resizing. Thanks for the explanation.

VS 2013 Community Edition lost its license: SP324098: Your browser could not complete the operation.

I have installed Visual Studio 2013 Community Edition on a brand new Windows 7 machine and registered with a new Microsoft account. This was for testing purpose to see how well the new Community Edition would work in comparison to the Professional Edition.
At first, everything looked good.
Didn't use it in a while now, and just came back to see that it's complaining about a license. What a warm welcome. It gave me a link to "renew" the license and I clicked it. It opened that pre-login window, then came back and said this:
SP324098: Your browser could not complete the operation.
That's all. Every single time I retry. What does it even mean? I don't want my browser (IE11 by the way) to do anything, I just want that license to use my free Visual Studio edition. Is it not free after all, was it just a trial that has now expired? I
mean, why should I get a 1500$ application for free... That just doesn't sound real.
Anyway, can somebody tell me what went wrong and whether/how it can be fixed?

Okay, something's badly broken here in my region. I took an older VM with Windows 8.1 and an installed VS 2013 (from MSDN, with licence), uninstalled VS 2013, installed all Windows updates, and then installed the VS 2015 CTP 5. It has installed fine, but
at the first start, it says:
Sorry, we ran into a problem.
SP324098: Your browser could not complete the operation.
At least I can ignore the problem and continue in this case. After starting, under "Register product", it first said "licence expires in 14 days" and I was logged in with my primary account. Must have been from the previous installation.
The error code appeared here as well. After logging out and registering again, it seems to work. And my default browser here is Chrome and I never took special care about IE. In VS 2013 CE, however, I don't even get the login form.
So this is an entirely different machine, it has never seen a community edition of Visual Studio nor the separate account I used for it. Yet it failed with the very same error message. What the heck does that error code even mean and what is the real cause
of it?? Can you please tell me the truth about it? I don't want to chase symptoms or try every guess somebody might have (retry, restart, reinstall) – that leads us nowhere. This error appears for a reason, I hope, and somebody must be able to find that out.
(If not, I'm really wondering what Microsoft engineers do and whether they know their product.)
If this doesn't improve, I honestly and urgently suggest you drop this broken licensing implementation and replace it by what there was before (i.e. product key or nothing at all) or use another proven technology. This thing just isn't stable or reliable
and will cause trouble.

HT201250 My Time Machine is not backing up and gives me this error report, 'The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use. Time machine could not complete backup. Can anyone help me?

My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?

Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help.

I'm trying to clean up my mailbox and when I delete an item(s) I get a message that say's "operation could not be completed- file exists. Further, when I do this one message is copied (not deleted) to the trash folder. Can someone help me through this?

I'm trying to clean my mailbox and when I click on delete or highlight and move to trash I get a message that says "operation could not be completed - file exists. Further, when I select a message or group of messages, one of them is copied (not deleted) to the trash folder. Can someone help me through this?
Thanks.

It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Outlook 2010 "could not complete the operation" when forwarding email

Hi, I have a user who is experiencing the following error. He is opening an email, clicking Forward, adding some text of his own to the top, and clicking Send. When he does, he gets the following error: "Microsoft Outlook could not complete the operation.
One or more parameter values are not valid." I first had him run the inbox repair tool SCANPST.EXE and it did not help. Then I had him delete his mail profile, create a new one, and re-downloaded the local copy of his mailbox from the Exchange server (he is
running in Cached mode). No change, he is still getting the error. Some searching produced the suggestion to rename the existing OUTCMD.DAT, EXTEND.DAT and FRMCAHE.DAT files to force Outlook to create new ones, but I don't know where those files are located,
and in any case as far as I can see, it may apply only to older versions of Outlook, or an Outlook client configured to use POP3/IMAP and not Exchange as ours is. Any advice?

Hi Dan,
Please check whether there are some add-in application on the client end, and disable them to make a test.
How about on other box to create a new profile to make a test?
Regards!
Gavin
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

Operation could not be completed because "whatever file i'm copying" is in use

Ever since upgrading my 2012 Mac Air to Mavericks, I've been seeing this error message sporadically when copying files to my SMB share on my raspberrypi.
I'm not sure if it's just coincidence with the os upgrade, and I'm not sure how to consistently reproduce the problem.
"Operation could not be completed because "whatever file I'm copying" is in use".
It doesn't seem to matter if I'm copying one file or a bunch of files. Randomly, that message will pop up, and then the copy will stop.

I've restarted the mac quite a few times, with and without the reopen option checked. Made sure the first thing to do was to copy those files to the other server. The only thing that could be using the files, would be Finder itself. It seems like when I have a list of files to copy, the message will pop up somewhere in the middle of the list. All the files previous to the error have been copied correctly. All files including the one in the error message and after it, don't get copied.
If the first or only file is particularly large, the error may pop up. When the message does pop up, it is always after a few minutes of copying, never right away.
Never had this problem prior to the Mavericks upgrade.

Hi: My wife has mail sent from a 3rd party email account. When she attempts to trash these emails 2 things happen. The message goes in the trash and an error message happens..Trash-home email. Operation could not complete. File exists.

Similar Messages

Maybe you are looking for