Syntax error: bad digit in number
I made a panel for ID cs5, the panel and buttons work fine.
But in the panel is one button with a script, if i click this button i get an syntax error, bad digit in number.
The script works fine on its own but not from the panel.
Any help is very much appreciated
thnx
Harald
Try to check this:
1) the script you insert in the button must not contain any kind of comment ( // or /* */ ) ( configurator doesn'accept any comment inside the button)
2) each statement is separated by a semicolon ( ; )
the syntax must be perfect
Anyway if you have difficult to find the problem you can link the button to the
Yourscript .jsx file
Similar Messages
-
/sbin/mkinitcpio: 54: Syntax error: Bad substitution
When I try upgrading my kernel I get the following output, ending with a Bad Substitution error:
checking package integrity... done.
loading package data... done.
checking for file conflicts... done.
upgrading kernel26... done.
>>>
>>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
>>>
>>> Updating module dependencies. Please wait ...
>>> MKINITCPIO SETUP
>>> ----------------
>>> If you use LVM2, Encrypted root or software RAID,
>>> Ensure you enable support in /etc/mkinitcpio.conf .
>>> More information about mkinitcpio setup can be found here:
>>> http://wiki.archlinux.org/index.php/Mkinitcpio
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
/sbin/mkinitcpio: 54: Syntax error: Bad substitution
I tried reinstalling mkinitcpio, but that does not seem to have any effect. What could be the problem here?changing the shebang to #!/bin/bash instead of #!/bin/sh in mkinitcpio seems to get it working again.
but now I get the following:
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image "default"
==> Running command: /sbin/mkinitcpio -k 2.6.18-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
:: Begin build
:: Parsing hook [base]
:: Parsing hook [udev]
:: Parsing hook [autodetect]
:: Parsing hook [ide]
:: Parsing hook [scsi]
:: Parsing hook [sata]
:: Parsing hook [filesystems]
:: Generating module dependencies
:: Generating image '/boot/kernel26.img'...usage: gzip [-cdfhlLnNtvV19] [-S suffix] [file ...]
FAILED
==> FAIL
==> Building image "fallback"
==> Running command: /sbin/mkinitcpio -k 2.6.18-ARCH -c /etc/mkinitcpio.d/kernel26-fallback.conf -g /boot/kernel26-fallback.img
:: Begin build
:: Parsing hook [base]
:: Parsing hook [udev]
:: Parsing hook [ide]
:: Parsing hook [scsi]
:: Parsing hook [sata]
:: Parsing hook [usbinput]
:: Parsing hook [raid]
:: Parsing hook [filesystems]
:: Generating module dependencies
:: Generating image '/boot/kernel26-fallback.img'...usage: gzip [-cdfhlLnNtvV19] [-S suffix] [file ...]
FAILED
==> FAIL
something is screwy here. -
Syntax error: Missing operand after 'Number' operator
If Serial_NumberTextBox.Text = "" Then
Exit Sub
Else
Dim cantfind As String = Serial_NumberTextBox.Text
TravelINFOBindingSource.Filter = "(Convert(Serial Number, 'System.String') LIKE '" & Serial_NumberTextBox.Text & "')"
If TravelINFOBindingSource.Count <> 0 Then
With Form5.DataGridView1
.DataSource = TravelINFOBindingSource
End With
Else
TextBox1.Text = "Ticket is either expired or not avaliable!"
TextBox1.ForeColor = Color.Red
Serial_NumberTextBox.Text = ""
Serial_NumberTextBox.Select()
Serial_NumberTextBox.SelectAll()
End If
End If
where is the error !!! help me plz
Hello,
Like syntax for this is the same as SQL Like, see
the following documentation and note the percent symbol. Also remove the ( and ) in the string.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. -
Does anyone know why I keep getting an error message, "Error invalid number. Please re-send using a valid 10 digit mobile number or valid short code. The numbers I'm texting to, are valid numbers.
Did you ever get resolution to this problem?
My coworker has the identical issue, including the number (+1 (1)(216)116-11) in the error reply. -
Feature Request: Line Number on Syntax Error
Hi,
When I execute a query in the query window and there is a syntax error, I don't get the line number of where the error is as I normally do in SQLPlus. Is this this something that can be added to the error message?
thanks
-NielsAlternatively, if you feed the SQL into a procedure (or anon block) something like below, this will give you the exact character position of the failure.
I've previously used this in a java/jdbc web-based ad-hoc query solution to good effect, and so blaming java/jdbc is not really valid.......
CREATE OR REPLACE
PROCEDURE parse
(sqlstr IN VARCHAR2)
IS
cur BINARY_INTEGER := DBMS_SQL.OPEN_CURSOR;
errpos BINARY_INTEGER;
fdbk BINARY_INTEGER;
BEGIN
DBMS_SQL.PARSE (cur, sqlstr, DBMS_SQL.NATIVE);
DBMS_SQL.CLOSE_CURSOR (cur);
EXCEPTION
WHEN OTHERS
THEN
errpos := DBMS_SQL.LAST_ERROR_POSITION;
DBMS_OUTPUT.PUT_LINE (SQLERRM || ' at pos ' || errpos);
DBMS_SQL.CLOSE_CURSOR (cur);
END; -
Crystal Reports 2008 Viewer Syntax error number: -2146827286
I have CrystalReportViewer12 installed on Apache/Tomcat 6. I have configured all components as necessary: installed jars and setup web.xml/CRConfig.xml. I can get the report to display appropriately in my jsp page. But when I try to use the Go To Next Page button I receive the following error:
name: SyntaxError
message: Syntax error
number: -2146827286
description: Syntax error
Any assistance will be appreciated.
Thanks.Translating the error message on bablefish I get:
Mistake with the store of the data bank information. Mistake in the file Report {C6512421-348A-4621-B1ED-895D28646A0A} .rpt
Which I'm sure is not 100% accurate, but it gives a good hint. As well, because of this:
"Do I need to install an additional / diffrent runtime than 2008 Runtime"
I wonder how you installed the CR 12 runtime on that computer? For more info on CR runtimes, see [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0] wiki.
If my suggestion above does not help, make sure the Win\temp directory can be accessed buy the application. Crystal Reports runtime needs to write and read files from the temp directory.
Ludek -
Crystal Reports Server 2008 - CMC Login Error - Bad Port Number in CMS Name
This post is similar to previous post: Error: Bad port number in CMS name fe80:0:0:0:152f:77a:382d:6d8e:6400 null - which remains unanswered.
In this case, I have installed a full licensed version of CRS 2008 on Windows Server 2008. I'm using Tomcat 5.5 and IIS 7.0.
The error we get when trying to log into the server using SERVERNAME:6400 (the default), is:
u2022Error: Bad port number in CMS name fe80:0:0:0:6509:bde9:93bf:f9de:6400 null
We neglected to install IIS prior to installing CRS, so when we realized our error, we installed IIS and then uninstalled/reinstalled CRS 2008.
Prior to reinstalling CRS, the CMC allowed us to login with no problem, which leads me to suspect that CRS may not have uninstalled cleanly.
Can anyone help me to understand what causes this error, and what steps can be taken to resolve it?Hi,
Try to check the port number 6400 is assigned properly to CMS. Please make sure that its not assigned to any other Products.
Thanks,
SK. -
What is this error java.sql.SQLException: Bad format for number ?
Dear All,
I am reading few values from database. Then I get this error "MyError:Error : java.sql.SQLException: Bad format for number 'Sarawak' in column 6. " So what is this error referring to. I have checked the database column and its value fits according the data type. Any hints please?I have checked the database column and its value fits according the data type.Check again. Then check again. Keep checking until you find your error. You are trying to read a string containing "Sarawak" as a number. You have "getInt(6)" or other numeric type, and the 6th column in the select statement is not numeric.
-
I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?
PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it. -
Bad major version number error
I'm trying to run the HelloWorld program in Linux. I can compile ("javac HelloWorld.java"), but when I try to run the program, using "java HelloWorld", i got the following error message:
Error loading class HelloWorld: Bad major version number
Any idea of what's wrong?well, i found the problem. i had installed an old java version and forgot to delete it. i was using jdk 1.1 and i didn't notice it. just deleted the old version and everything went fine. thanks, m_srini ! :-)
-
ORA-20002: 501 Bad syntax error
Hi,
I intend to send a simple smtp mail using the builtin UTL_SMTP package.
But i get the following error:-
ORA-20002: 501 Bad syntax error
Here is my code:-
CREATE OR REPLACE PROCEDURE mail
IS
BEGIN
DECLARE
v_connection UTL_SMTP.CONNECTION;
BEGIN v_connection := UTL_SMTP.OPEN_CONNECTION(<my host here>,25);
dbms_output.put_line('Connection Opened');
UTL_SMTP.HELO(v_connection,<my host here>);
dbms_output.put_line('After calling helo');
UTL_SMTP.MAIL(v_connection,'[email protected]');
dbms_output.put_line('Sender set');
UTL_SMTP.RCPT(v_connection,'[email protected]');
dbms_output.put_line('Recipient Set');
UTL_SMTP.DATA(v_connection,'Sent From PL/SQL');
dbms_output.put_line('Message body set');
UTL_SMTP.QUIT(v_connection);
dbms_output.put_line('Connection Closed');
end;
END;
Here is the output:-
SQL> exec mail
Connection Opened
After calling helo
BEGIN mail; END;
ERROR at line 1:
ORA-20002: 501 Bad address syntax
ORA-06512: at "SYS.UTL_SMTP", line 86
ORA-06512: at "SYS.UTL_SMTP", line 204
ORA-06512: at "ADMIN.MAIL", line 13
ORA-06512: at line 1
I tried sending mails to my smtp server via java mailing API and i am
successful. So i am wondering wat i am doing wrong up there in Oracle.
I have JServer enabled, i also ran the initplsj.sql successfully.
Please help.
Regards,
Leo.Hi APC,
Yep HELO returns 250. Here is the code i use followed by the output. I use valid e-mail addresses(changed them here cz they belong to real ppl :) ). Again, i am able to send mails via java mailing API's, to the same recipietn from same sender via same smtp server.
Code :------
CREATE OR REPLACE PROCEDURE mail
IS
v_connection UTL_SMTP.CONNECTION;
value UTL_SMTP.reply;
PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
BEGIN
UTL_SMTP.write_data(v_connection, name || ': ' || header || utl_tcp.CRLF);
END;
BEGIN
v_connection := UTL_SMTP.OPEN_CONNECTION('smtp.server',25);
dbms_output.put_line('Connection Opened');
dbms_output.put_line('before calling helo');
value := UTL_SMTP.HELO(v_connection,'smtp.server');
dbms_output.put_line('after calling helo');
dbms_output.put_line('code ' || value.code);
dbms_output.put_line('before Sender is set');
value := UTL_SMTP.MAIL(v_connection,'[email protected]');
dbms_output.put_line('code ' || value.code);
dbms_output.put_line('text ' || value.text);
UTL_SMTP.RCPT(v_connection,'[email protected]');
dbms_output.put_line('Recipient Set');
UTL_SMTP.open_data(v_connection);
send_header('From','"Sender" <[email protected]>');
send_header('To','"Recipient" <[email protected]>');
send_header('Subject','Hello');
UTL_SMTP.write_data(v_connection, UTL_TCP.CRLF || 'Hello, world!');
UTL_SMTP.close_data(v_connection);
dbms_output.put_line('Message body set');
UTL_SMTP.QUIT(v_connection);
dbms_output.put_line('Connection Closed');
END;
Output:--------
Connection Opened
before calling helo
after calling helo
code 250
before Sender is set
code 501
text Bad address syntax
Looking forward to hearing from youself. :)
Reagrds,
Leo. -
Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code
Hey, so my friend got a Galaxy s6 edge yesterday and gave me his new number. When I tried texting it I received this immediately after:
Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. Hey
I can receive messages from this number as well as calls. I've become aggravated and am not sure what to do. Please help, thanks!Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise -
I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.
Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise -
tried all the method proposed for former similar questions. None works. Even more confused about whether it is the problem of AT&T or apple or both? How can I solve it. It's really annoying!
Are you in the US? If you are in the US, you don't need to call or text the full number unless it is a toll free number.
You can just use the 10 digit number XXX-XXX-XXXX
It seems the number is invalid so AT&T respond back saying that "at&t +1 (1) (216)116-11 error invalid number please resend using 10 digit mobile number"
If you are using the right number and you know for sure it is a working number, try delete the number in question that you try to text to like call history or text history of that number and just delete it. Do not delete the number in your contacts though. Delete history pertaining to it in calls and text.
Then try it again to text to the number. -
I am not able to send text messages to one particular person. Error comes back to enter a valid 10-digit phone number or short code. I have deleted this contact and re-entered numerous times and still get the same error code. Any ideas?
Are you entering a 10 digit number? Or, if it is not a North American number or you are not in North America, are you entering "+" followed by the country code and number?
Maybe you are looking for
-
Problems setting up C8180 software Ps_A10_02_NET_FULL_WIN_WW_130_140uu (311.96mb) HELP!
-
Is it possible to upload an album from my iPod to iTunes?
Is it possible to upload an album from my iPod to iTunes?
-
Bad file name or volume name error
Hello All, I am currently in a session when all of the sudden, as I arm a track to record and press record i get an error that states.. "Bad File Name or Volume Name (perhaps zero length) Result Code = -37" Anybody know how to fix this?
-
What is fault message type in mapping
hi folks, what is the use of fault message type in message mapping . where do we use them .please spare a little time to type rather to refer to other blogs. have a nice day
-
Updating plug ins from CS2 to CS3
I have written a grifics intense book in the trial version of CS3 (which has expired.) I was given CS2 Premium but cannot open my documents because I am needing to "update" plugins. How do I do this? and where do I get them? Cheryl