Syntax error in SCAT (CATT script)
Hi All,
I have a problem when i use SCAT script to define the import parameter
Here the error message goes...
Syntax error : &value (offset and length are not in the form +x(
Please guide me how to fix this?
Appreciate your response.
Thanks in advance
Edited by: Dharmendra Pewa on Dec 24, 2010 1:32 PM
Moderator Message: Duplicate Post.
Edited by: kishan P on Dec 24, 2010 6:42 PM
Hi,
Thanx for the reply, but this ' ( ' is coming by itself in the Field name column in the Field list screen, that too in display mode, it is not allowed to change there. please suggest.
Keyword Field name Len New field contents
BDC_CURSOR 000 &BDC_CURSOR
BDC_OKCODE 000 &BDC_OKCODE
Material KOMG-MATNR(1) 018 10055
Calculat.type RV13A-KRECH(1) 001 Q
Valid on RV13A-DATAB(1) 010 01.05.2010
Valid to RV13A-DATBI(1) 010 30.04.2011
AddValDays KONP-VALTG(1) 002 0
DP
Similar Messages
-
Syntax errors in examples for UTL_LMS
The examples for UTL_LMS in
Oracle® Database PL/SQL Packages and Types Reference
10g Release 2 (10.2)
Part Number B14258-01
http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_lms.htm
contain syntax errors
Correct would be
DECLARE
s varchar2(200);
i pls_integer;
BEGIN
i:= utl_lms.get_message(26052, 'rdbms', 'ora', 'french', s);
dbms_output.put_line('before format, message is: '||s);
dbms_output.put_line('formatted message is: '||utl_lms.format_message(s, 9, 'my_column_name'));
END;
/and
DECLARE
s varchar2(200);
i pls_integer;
BEGIN
i:=utl_lms.get_message(601, 'rdbms', 'oci', 'french', s);
dbms_output.put_line('OCI--00601 is: '||s);
END;
/Hello Martin,
This is a known problem with wlst-jython. One cannot catch syntax errors
programmatically. The only way is to avoid loading properties file
that may cause syntax errors.
I am curious though how can a user enter invalid properties via a script?
thanks,
-satya
Martin Gustavsson wrote:
Hi,
When there are syntax errors in WLST-script, the calling program will get no information about this.
In our case the calling program is ANT. If the user enters invalid properties it could cause syntax errors in the WLST script. But the ANT task always receive a successfull code back and doesn't know that it went wrong.
What is the workaround for this? How can I from WLST return a fail code so that ANT does not continue?
Regards,
Martin -
Syntax errors in WLST are not reported to calling program
Hi,
When there are syntax errors in WLST-script, the calling program will get no information about this.
In our case the calling program is ANT. If the user enters invalid properties it could cause syntax errors in the WLST script. But the ANT task always receive a successfull code back and doesn't know that it went wrong.
What is the workaround for this? How can I from WLST return a fail code so that ANT does not continue?
Regards,
MartinHello Martin,
This is a known problem with wlst-jython. One cannot catch syntax errors
programmatically. The only way is to avoid loading properties file
that may cause syntax errors.
I am curious though how can a user enter invalid properties via a script?
thanks,
-satya
Martin Gustavsson wrote:
Hi,
When there are syntax errors in WLST-script, the calling program will get no information about this.
In our case the calling program is ANT. If the user enters invalid properties it could cause syntax errors in the WLST script. But the ANT task always receive a successfull code back and doesn't know that it went wrong.
What is the workaround for this? How can I from WLST return a fail code so that ANT does not continue?
Regards,
Martin -
I teach games development using Flash Professional CS6, and one of my students has photosensitive epilepsy. He is finding that the 'strobing' effect which occurs when he executes Test Movie on a movie with errors in its script is triggering headaches which can be a precursor to a fit. Obviously this is making it very difficult for him to complete his lab and assignment work. Is there any way of preventing a Flash movie from running if it contains a syntax error?
I have created a workaround by adding a bunch of extra frames to the start of the movie which will display a "SYNTAX ERROR" message if the script doesn't run - this gives my student a few seconds margin to quite the movie before the strobing begins. I have a single frame at the start with a goto statement which jumps over those error frames if the code doesn't have any syntax errors.
This seems to be working ok, but it's an ugly solution - does anyone know of a better way to deal with this?
Thanks.1.In Preferences you can check "open test-movie in tabs".
2. Having done that you could write a jsfl-script which switches the focus (immeadiately after you test the movie) to another tab in the same register card, thus, forcing the possible "corrupt" testmovie in the background. If are no compiler errors , the testmovie can be made available by simply switching to the test-movie tab, if there are compiler errors, you can close it without having to look at it.
Another option would be to setup FlashDevelop as compiler trigger of Flash.
You have to change these basic properties in your project:
FlashDevelop will only launch the test movie if it compiles flawless, inside Flash.
FlashDevelop will act as a "bouncer" to Flash. -
Syntax error in CATT (SCAT)
Hi All,
I have a problem when i use SCAT script to define the import parameter
Here the error message goes...
Syntax error : &value (offset and length are not in the form +x(
Please guide me how to fix this?
Appreciate your response.
Thanks in advance
DPHi,
Thanx for the reply, but this ' ( ' is coming by itself in the Field name column in the Field list screen, that too in display mode, it is not allowed to change there. please suggest.
Keyword Field name Len New field contents
BDC_CURSOR 000 &BDC_CURSOR
BDC_OKCODE 000 &BDC_OKCODE
Material KOMG-MATNR(1) 018 10055
Calculat.type RV13A-KRECH(1) 001 Q
Valid on RV13A-DATAB(1) 010 01.05.2010
Valid to RV13A-DATBI(1) 010 30.04.2011
AddValDays KONP-VALTG(1) 002 0
DP -
I am making an applescript for my modding tool for Minecraft. It used to use multiple apps and I am now trying to make one app for all the tasks.
Here is the code:
say "You are running iCraft version one point one for minecraft version 1.2.5"
display dialog "Which tool do you want to use?" buttons {"Mod Installer", "Backup", "Restore"} default button 3
set the button_pressed to the button returned of the result
if the button_pressed is "Mod Installer" then
do shell script "~/desktop/iCraft/iCraft.app/contents/re…
display dialog "Insert all mod files into the Mods folder."
display dialog "Have you inserted all Mod files into the Mods folder?" buttons {"Yes", "No"} default button 2
if the button_pressed is "Yes" then
do shell script "~/desktop/iCraft/iCraft.app/contents/re…
display dialog "Finished"
else
display dialog "Insert mod files into the Mods folder and restart iCraft.app."
end if
if the button_pressed is "Backup" then
display dialog "Are you sure you want to backup your Minecraft.jar in it's current state?" buttons {"Yes", "No"} default button 2
if the button_pressed is "Yes" then
do shell script "~/desktop/iCraft/iCraft.app/contents/re…
display dialog "Finished, find it in your Backups directory in the iCraft folder"
else
display dialog "Backup aborted"
end if
if the button_pressed is "Restore" then
display dialog "Are you sure you want to restore your Minecraft.jar with your backup?" buttons {"Yes", "No"} default button 2
if the button_pressed is "Yes" then
do shell script "~/desktop/iCraft/iCraft.app/resources/s…
else
display dialog "Restore aborted"
end if
end
When I try to compile/run it gives me Syntax Error: Expected end of line, etc. but found end of script.Your script got mangled when pasting it into your message, but the main problem looks like you are missing a bunch of end if statements. Unless your if statements are contained on one line, you need to terminate them with a matching end if statement - for example, the following are equivalent:
if someString is "whatever" then display dialog "foo"
if someString is "whatever" then
display dialog "foo"
end if -
Syntax error while creating Calculation view script based
Hi Folks,
I'm creating Calc view based on script and drafted a simple code but I'm getting syntax error.
Its just fetching few coloumns from two tables products and purchaseorderitem.
/********* Begin Procedure Script ************/
BEGIN
var_out = select productid , category, nameid, currency, grossamount, quantity
FROM sap.hana.democontent.epm.data.products AS P , sap.hana.democontent.epm.data.purchaseorderitem AS B
where P.productid = B.productid;
END /********* End Procedure Script ************/
Could you pls take a look and let me know what wrong I'm doing?
Error logs are:-
sap.hana..package.project.folder.mytest.CALCSCRIPTVIEWInternal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Deploy Calculation View: SQL: sql syntax error: incorrect syntax near "democontent": line 5 col 18 (at pos 439)nSet Schema DDL statement: set schema "SYSTEM"nType DDL: create type "_SYS_BIC"."sap.hana..package.project.folder.mytest/CALCSCRIPTVIEW/proc/tabletype/VAR_OUT" as table ("PRODUCTID" NVARCHAR(10), "CATEGORY" NVARCHAR(2), "NAMEID" NVARCHAR(10), "CURRENCY" NVARCHAR(5), "GROSSAMOUNT" DECIMAL(15,2), "QUANITYT" DECIMAL(13,3))nProcedure DDL: create procedure "_SYS_BIC"."sap.hana.package.project.folder.mytest/CALCSCRIPTVIEW/proc" ( OUT var_out "_SYS_BIC"."sap.hana.package.project.folder.mytest/CALCSCRIPTVIEW/proc/tabletype/VAR_OUT" ) language sqlscript sql security definer reads sql data as n /********* Begin Procedure Script ************/ n BEGIN n t var_out = select productid , category, nameid, currency, grossamount, quantityn t FROM sap.hana.democontent.epm.data.products AS P , sap.hana.democontent.epm.data.purchaseorderitem AS Bn t where P.productid = B.productid;nnEND /********* End Procedure Script ************/nHi Rubane,
I don't have EPM installed here but based on this Table User Defined Functions( Table UDF ) in HANA you are not properly defining the source table.
In your case missing 1) schema of EPM, 2) not using double quotes, 3) separation of package and view, 4) missing camel case on purchaseOrderItem:
FROM sap.hana.democontent.epm.data.products AS P , sap.hana.democontent.epm.data.purchaseorderitem AS B
On blog:
from "SAP_HANA_EPM_DEMO"."sap.hana.democontent.epm.data::businessPartner" as a
SAP_HANA_EPM_DEMO is the schema
sap.hana.democontent.epm.data is the package
businessPartner is the view
Start simple... before the seletion try it out on Studio SQL.
Regards, Fernando Da Rós -
I can access my facebook account with no trouble, but once facebook is loaded I repeatedly get an error message; syntax error. The words 'Java Script application' are in the bar across the top of the message. It comes up many times and completely disrupts what I am doing. I am wondering if ot has something to do with the adverts in the side bar of each page that I open in facebook. If I open FB from Google Chrome I don't get that problem, or in Explorer, but I would rather use Firefox. Help would be apprecitaed, please. Thanks.
hello, first of all please [https://www.mozilla.org/firefox/update/ update firefox to the latest version]. the errors you're getting are likely coming from the socialfixer addon that you've installed - there's also an updated version of the extension available which fixes these kind of issues: http://socialfixer.com/blog/category/releasenotes/
-
I want to be able to catch errors that occur during the execution of Matlab code in a LabVIEW Matlab script node. According to my understanding of the documentation, errors of this type should be available at the "error out" signal point on the Matlab script node. I have noticed that even deliberately generating matlab syntax errors will not produce an error output. See the attached vi for an example.
Attachments:
matlab.vi 13 KBI ran your example VI and the is what I got in the Error Out cluster:
"Code 1050
Error occured while executing script. Error message from server: ??? This is an error
. in matlab[1].vi"
If you are generating custom error messages in Matlab I would suggest passing them back to LabVIEW through output variables in the script node.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect -
StartupItem with syntax error (sh script)
I'm comfy on the cli but still green with scripting it. I've followed the Apple tut on making a StartupItem, but I am getting simple (I hope) sh syntax errors when I run it. The three *Service functions are required, as they're called by the RunService function (from the sourced rc.common script) ... all per the Apple tutorial.
In any case, the error I get is:
line 7: syntax error near unexpected token `}'
/Library/StartupItems/blah/blah: line 7: `}'
The complaint is about the bracing earlier in execution than the 'tricky' stuff. I hope that suggests the problem is here and not in my Boot.bash script. I'll post that too if, as I'm noticing with scripting, the complaints about eofs and bracing and such are not where the real problem lies. I'm a bash person though so, especially if this is just an sh syntax misuse, feel free to give me what for.
Any thoughts, fixes, or straight advice appreciated,
Joel
#!/bin/sh
. /etc/rc.common
StopService() {
# nothing to kill
RestartService() {
StopService
StartService
StartService() {
/bin/bash /Library/Management/Boot.bash
RunService "$1"Hi Joel,
I've actually read a scripting guide that recommends defining functions with the "function" keyword and the norm is to put a space before and after the "()". However, your syntax is valid. In fact I see no errors at all; the script should work.
Thus, the problem is most likely something invisible. It's time to investigate the text editor you used to create the script. You should open the script in a UNIX text editor, like vim, and look for hidden characters or Mac line endings. An even better solution might be to get the free text editor TextWrangler, (or BBEdit if you have it) open the file and set it to show invisible characters. It will also tell you what kind of line endings are used in the file. You might also post a long listing of the StartupItem script.
Gary
~~~~
He's just a politician trying to save both his faces... -
E-catt Script error while trying to Modify the script
Hi All ,
I get the error while trying to modify the E-catt Script "Entry cannot be changed In User View Object <Objext Name > ". Please let me know if Some one confronted with same error or that can be avoided.
Waiting for your reply
BadariHi Baez,
You have to create a record with country record id in BankDetails table or get record id if country record id is already existed in BankDetails table and use this record id to create qualified link .
1. get Country record id
2. search in Bankdetails table with Country Record id,
3 . if exist in Bank details table, get record id in Bank details table and pass it to createQualifiedLink()method
or
3. if Country record does not exist in BankDetails table, then create new record in bankdetails table with Country record id, pass record id of new record to createQualifiedLink()method
I hope this helps you......
Cheers,
Veeru -
Getting "Unable to run script at line 1: syntax error" error?
Hi,
I want to run a script using the AEGP_ExecuteScript() function. but I got an error "Unable to run script at line 1: syntax error". what could be the rea son for this? shall I inlcude anything extra info in my project?
Below is the code ...
char scriptPath[] = "F:\\Documents and Settings\\akshays\\Desktop \\Active Shutter.jsx";
A_Boolean platform_encodingB = 'B';
AEGP_MemHandle outResultPH0;
AEGP_MemHandle outErrorStringPH0;
utilitySuite5->AEGP_ExecuteScript( pluginID, scriptPath, platform_encodingB, &outResultPH0, &outErrorStringPH0 );
please help me.
Thanks
ManjunathThis can be debug by using "ExtendSCript Toolkit 2 and Debugger".
Just open Edit -> Prefernces -> General -> ****
There enable checkbox "Enable javascript debugger".
if you encountering an error while launching the script, then AE will automatically open your script in "ExtendSCript" toolkit with an error at the bottom line. You can see the "DataBrowsing" panel right side for available functions., objects and so on.
then you can get to know what is the error and the reason for this error at least. -
Syntax Error: Expected end of line but found end of script.
display dialog "Are you awesome" buttons {"Yes", "No"} default button 1
if the button returned of the result is "Yes" then
tell application "Finder"
display dialog "You Passed the Test" buttons {"YAY", "Poop nugets"} default button 1
end tell
display dialog "Cool" buttons {"Ok", "More Info"} default button 1
if the button returned of the result is "More Info" then
tell application "Finder"
display dialog "You are obviously are awesome,
100% Cool" buttons {"Ok"} default button 1
end tell
Then it says:
Syntax error: Expected end of line but found end of script.can somebody fix this scrip becasue i am having the exact same problems
tell application "SpeechRecognitionServer"
set theResponse to listen for {"yes", "no"} with prompt "Hello Michael, Would you like the internet?"
if theResponse is "yes" then
launch application "Google Chrome"
tell application "SpeechRecognitionServer"
set theResponse to listen for {"yes", "no"} with prompt "What about a Calander?"
if theResponse is "yes" then
launch application "ical"
tell application "SpeechRecognitionServer"
set theResponse to listen for {"yes", "no"} with prompt "How about some iTunes Music?"
if theResponse is "yes" then
launch application "itunes"
tell application "SpeechRecognitionServer"
set theResponse to listen for {"yes","no"} with prompt "Would you like me to stop?"
if theResponse is "no" then
say "ok"
else
if theResponse is "no" then
exit repeat
else
exit repeat
end
end if
end
end if
end
end if
end tell -
Getting Syntax Error in Script Editor
I am a fairly new Mac user and also fresh to programming. I am trying run a piece of code that I copied directly from a guide but seems to be giving me a syntax error: "Expected 'into', variable name, other parameter name or property but found end of line."
Here is the code that I am working with:
on gestaltVersioninfo(gestaltcode, string_length)
try
tell application "Finder" to ¬
copy my NumToHex((system attribute gestalt_code), ¬
string_length) to {a, b, c, d}
set the numeric_version to {a, b, c, d} as string
if a is "0" then set a to ""
set the version_string to (a & b & "." & c & "." & d) as string
return {numeric_version, version_string}
on error
return {"", "unknown"}
end try
end gestaltVersion_info
on NumToHex(hexData, stringLength)
set hexString to {}
repeat with i from stringLength to 1 by -1
set hexString to ((hexData mod 16) as string) & hexString
set hexData to hexData div 16
end repeat
return (hexString as string)
end NumToHex
copy my gestaltVersion_info("sysv", 4) to {system_version, system_string}
if the system_version is less than "1050" then
do shell script "/usr/bin/printf \"\\n# Block Adobe
Activation\\n127.0.0.1\\tactivate.adobe.com\\n127.0.0.1\\tpractivate.adobe.com\
\n127.0.0.1\\tereg.adobe.com\\n127.0.0.1\\tactivate.wip3.adobe.com\\n127.0.0.1\
\tactivate.wip4.adobe.com\\n127.0.0.1\\twip3.adobe.com\\n127.0.0.1\\twip4.adobe
.com\\n127.0.0.1\\t3dns-3.adobe.com\\n127.0.0.1\\t3dns-
4.adobe.com\\n127.0.0.1\\t3dns-2.adobe.com\\n127.0.0.1\\tadobedns.
adobe.com\\n127.0.0.1\\tadobe-dns-2.adobe.com\\n127.0.0.1\\tadobe-dns-
3.adobe.com\\n127.0.0.1\\tereg.wip3.adobe.com\\n127.0.0.1\\tactivatesea.
adobe.com\\n127.0.0.1\\twwis-dubc1-vip60.adobe.com\\n127.0.0.1\\tactivatesjc0.
adobe.com\\n127.0.0.1\\thl2rcv.adobe.com\\n\" >> /etc/hosts" with
administrator privileges
else if the system_version is greater than "1050" then
do shell script "/usr/bin/printf \"\\n# Block Adobe
Activation\\n127.0.0.1\\tactivate.adobe.com\\n127.0.0.1\\tpractivate.adobe.com\
\n127.0.0.1\\tereg.adobe.com\\n127.0.0.1\\tactivate.wip3.adobe.com\\n127.0.0.1\
\tactivate.wip4.adobe.com\\n127.0.0.1\\twip3.adobe.com\\n127.0.0.1\\twip4.adobe
.com\\n127.0.0.1\\t3dns-3.adobe.com\\n127.0.0.1\\t3dns-
4.adobe.com\\n127.0.0.1\\t3dns-2.adobe.com\\n127.0.0.1\\tadobedns.
adobe.com\\n127.0.0.1\\tadobe-dns-2.adobe.com\\n127.0.0.1\\tadobe-dns-
3.adobe.com\\n127.0.0.1\\tereg.wip3.adobe.com\\n127.0.0.1\\tactivatesea.
adobe.com\\n127.0.0.1\\twwis-dubc1-vip60.adobe.com\\n127.0.0.1\\tactivatesjc0.
adobe.com\\n127.0.0.1\\thl2rcv.adobe.com\\n\" >> /etc/hosts;
/usr/bin/dscacheutil -flushcache" with administrator privileges
end ifIn your first *do shell script* statement, the *with administrator privileges* parameter is split across two lines. You just need to either put it on a single line or use option-return to continue a statement on the next line (not sure if the last *do shell script* has the same issue).
Note that there is an AppleScript forum where these kinds of questions will be seen by a more targeted audience. -
Alittle over a month ago, started intermittently experiencing problems logging into Facebook. Sometimes it would work, other times nothing..just the dreaded 'circle of no progress'..I have tried everything from clear cache to clicking my heels together..I am now at my wits end. I cannot be the only one? I see everything from syntax errors to declaration dropped errors in the error console. When I get pissed enough, I am suddenly allowed to log in, but then I get stuck in facebook, if I stay in there too long, unable to navigate. Is this my machine telling me I need to be more productive oir is this browser truly as messed as it appears?
''[Profanity removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''Not flash/real player related. Thats been eliminated long time ago..I don't even use real player, and not receiving any flash crashes/hangs. I am not able to log into ONE site (Facebook) When I go into error console it is jammed full of errors:
Timestamp: 8/12/2012 6:03:23 PM
Warning: Error in parsing value for 'filter'. Declaration dropped.
Source File: http://s.ytimg.com/yt/cssbin/www-embed-vflKqOFPz.css
Line: 1
(about 20 of those in there)
Timestamp: 8/12/2012 6:03:23 PM
Warning: Unknown property '-moz-box-shadow'. Declaration dropped.
Source File: http://s.ytimg.com/yt/cssbin/www-embed-vflKqOFPz.css
Line: 1
Timestamp: 8/12/2012 6:03:23 PM
Warning: Unknown property '-moz-border-radius'. Declaration dropped.
Source File: http://s.ytimg.com/yt/cssbin/www-embed-vflKqOFPz.css
Line: 1
Timestamp: 8/12/2012 6:03:23 PM
Warning: Error in parsing value for 'background-image'. Declaration dropped.
Source File: http://s.ytimg.com/yt/cssbin/www-embed-vflKqOFPz.css
Line: 1
support.mozilla.org : server does not support RFC 5746, see CVE-2009-3555
Timestamp: 8/12/2012 6:04:17 PM
Error: The character encoding of the HTML document was not declared. The document will render with garbled text in some browser configurations if the document contains characters from outside the US-ASCII range. The character encoding of the page must to be declared in the document or in the transfer protocol.
Source File: about:plugins
Line: 0
Timestamp: 8/12/2012 6:06:34 PM
Error: TypeError: window.fsr$removeListener is not a function
Source File: http://forums.adobe.com/themes/adobe_forums_global/adobe.assets/ubi/foresee/foresee-trigger.js
Line: 194
These are just a few cut and pasted off the console...there are about 60 ++ in there off ab out 6 log in attempts. Went back in and was able to log in..logged out..tried to go back and same thing, can't log on.
Maybe you are looking for
-
Generic Service - Charts on Home Page...Sometimes?
Greetings all - I am using OEM 12.1.0.2, with Oracle Beacon(3.9+) 12.1.0.2 Here is the scenario - I navigate to 'targets - services' off the top drop down. I select 'beacons' off the 'Sevices Features' drop down. I select 'add' - Give it a name (Bob_
-
Why can't I download file from any websites?
Whenever I try to download files from filesharing sites like mediafire, I click the download button and the page appears to be loading and nothing happens. After several tries, I found out that while the page is loading, it is actually downloading th
-
I tried to upgrade to Firefox 3.6.1 from 3.5 and now I get a msg that I need to reboot to complete a previous install of Firefox. I have rebooted several times. I even tried to remove the Firefox from the add/remove program and it tells me that I nee
-
How to specify custom query as well as a selection criteria
Hi I'm struggling to specify a custom select query with variable no. of agruments through toplink. The custom query looks like: select outer.col1, outer.col2, outer.col3, outer.effective_date, outer.capacity_rate, outer.expiry_date, outer.comments, o
-
Where does iPhoto (9.4.2) store the photos? How do I access that file. I checked under the LIBRAY file and there is nothing in there for iPhoto. Where is the library? Thanks!