Matlab syntax errors are not caught and reported when code is executed in a LabVIEW Matlab script node

I want to be able to catch errors that occur during the execution of Matlab code in a LabVIEW Matlab script node. According to my understanding of the documentation, errors of this type should be available at the "error out" signal point on the Matlab script node. I have noticed that even deliberately generating matlab syntax errors will not produce an error output. See the attached vi for an example.
Attachments:
matlab.vi ‏13 KB

I ran your example VI and the is what I got in the Error Out cluster:
"Code 1050
Error occured while executing script. Error message from server: ??? This is an error
. in matlab[1].vi"
If you are generating custom error messages in Matlab I would suggest passing them back to LabVIEW through output variables in the script node.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Similar Messages

  • ActionScript syntax errors are not detection with Flash Builder 4

    I encountered a serious bug with Flash Builder 4, it is not showing ActionScript syntax error within an ActionScript class. How shall I fix this.
    Best Regards,

    Hi Mayank,
    Please find the further details below:
    Steps to Reproduce the bug:
    1. Create a Flex Project (say Test for example)
    2. Created a new ActionScript Class ABC.as within the Flex Project.
    on typing the following code (and even after saving it)
    package123 {
      public1234 class ABC {
      }blahblah123...
    Expeteded Behavior:
    ActionScript Editor should report an syntax errors with the following code.
    Present Beharvior
    no syntax error is detected. This is a regression in Flash Builder 4 as Flex Builder 3 detects ActionScript syntax error instantly (while typing).
    Best Regards

  • Errors are not showing in Tasks view

    Hello,
    I dont know why errors are not showing in Tasks view after I click Save All Metada, they only show when a Rebuild de project. This start to happen after a few days, can anyone tell me how to fix this?
    Thanks

    Hi Carol,
    After rebuild all compile time dependency and syntax might be checked and something is missing then errors suppose to come.
    If you have doubt you can re install the NWDS...
    Deepak!!!

  • SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
    So consider using IE as workaround.
    Also please refer:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
    Workaround here:
    http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
    -Vaibhav Chaudhari

  • Pricing errors are not cleared after fixing the master data

    Hi All,
    Kindly go through the issue explained below.
    Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.  
    System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine.  Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
    Scenario     :  Opportunity is saved with pricing errors. 
    Analysis     :  Price or/and Sales area are not maintained in Product that is maintained in Oppt.  That is why this error occurs.  So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
    Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
    Actual result: When we create a new opportunity with the same product, pricing is determined.  But the errors are not going away from the already created opportunity transactions.
    Please let me know if this scenario is not clear to understand. 
    Please help with your inputs.  Thank you for your time.
    Regards,
    Maddy

    Hi Luis,
    Thank you very much for your reply.  Could you please help me where is the button 'Redermine Pricing' available?  I have checked in Opportunity transaction but failed.
    Regards,
    Maddy

  • Syntatical errors are not showing up in JDEV

    Hi,
    Syntactical errors are not showing up in JDEV from past few days in my view. Can any one help me regarding this.
    Thanks in advance.
    -Sukumar

    what do you mean by setting the "JDEV from view"?
    If it is window's machine, delete the folder
    C:\Documents and Settings\<username>\Application Data\JDeveloper\systemXXXThanks,
    Navaneeth

  • Can't figure out why syntax errors are coming up

    Here is a simple Binary search type program, but instead of cutting the array in half, it uses interpolation to search the array. Here is the code, but I am getting syntax errors, I will post them below the code:
    public class BinIntSearch {
         private int interlope;
         private int low;
         private int high;
         private int[10] array1 = {6,500,600,700,800,900,1000,2000,3000,4000};
         public BinIntSearch() {//Start of Constructor
    interlope = 0;
         low = 0;
    high = 0;
    public int Search(int[] values, int target) {
    low = 0;
    high = 9;
    while(low < high)
    if(array1[low] == target)
         return low;
         else
    if(array1[high] == target)
    return high;
         interlope = (target - array1[low])/(array1[high] - array1[low]);
         interlope = low + (high - low) * interlope;
         if(interlope <= low)
         high--;
         else
         low = interlope;
    }//end of while loop
    System.out.println("Target not found");
    return -1;
    }//end of method
    public static void main(String args[])
    BinIntSearch binSearch = new BinIntSearch();
    binSearch.Search(array1,600);     
    }//end of class     
    here is the errors:
    C:\BinIntSearch\BinIntSearch.java:6: ']' expected
         private int[10] array1 = {6,500,600,700,800,900,1000,2000,3000,4000};
    ^
    C:\BinIntSearch\BinIntSearch.java:6: <identifier> expected
         private int[10] array1 = {6,500,600,700,800,900,1000,2000,3000,4000};
    ^
    C:\BinIntSearch\BinIntSearch.java:27: cannot resolve symbol
    symbol : variable array1
    location: class BinIntSearch
    if(array1[low] == target)
    ^
    C:\BinIntSearch\BinIntSearch.java:30: cannot resolve symbol
    symbol : variable array1
    location: class BinIntSearch
    if(array1[high] == target)
    ^
    C:\BinIntSearch\BinIntSearch.java:33: cannot resolve symbol
    symbol : variable array1
    location: class BinIntSearch
         interlope = (target - array1[low])/(array1[high] - array1[low]);
    ^
    C:\BinIntSearch\BinIntSearch.java:33: cannot resolve symbol
    symbol : variable array1
    location: class BinIntSearch
         interlope = (target - array1[low])/(array1[high] - array1[low]);
    ^
    C:\BinIntSearch\BinIntSearch.java:33: cannot resolve symbol
    symbol : variable array1
    location: class BinIntSearch
         interlope = (target - array1[low])/(array1[high] - array1[low]);
    ^
    C:\BinIntSearch\BinIntSearch.java:49: cannot resolve symbol
    symbol : variable array1
    location: class BinIntSearch
    binSearch.Search(array1,600);     
    ^
    8 errors
    Process completed.

    Thanks you guys, I made the change and learned something new and it worked. I made a refinement to the program, so i can initialize an array with consecutive numbers instead of typing in 10 I can have like 1000 or 1000000, I am getting 1 error. I can't figure this one out also. Also what is the meanding of static?
    here is the code and below it is the one error
    public class BinIntSearch {
    private int interlope;
    private int low;
    private int high;
    private int i;
    private int array1[10000];
    public BinIntSearch() {//Start of Constructor
    for(i = 0; i < 10000; i++)
    array1[i] = i;
    interlope = 0;
    low = 0;
    high = 0;
    Search(array1,500);
    public int Search(int[] values, int target) {
    low = 0;
    high = 9;
    while(low < high)
    if(array1[low] == target)
         System.out.println("Target Found");
    return low;
    if(array1[high] == target)
    System.out.println("Target Found");
    return high;
    interlope = (target - array1[low])/(array1[high] - array1[low]);
    interlope = low + (high - low) * interlope;
    if(interlope <= low)
    high--;
    else
    low = interlope;
    }//end of while loop
    System.out.println("Target not found");
    return -1;
    }//end of method
    public static void main(String args[])
    BinIntSearch binSearch = new BinIntSearch();
    }//end of class
    C:\BinIntSearch\BinIntSearch.java:8: ']' expected
    private int array1[10000];
    ^
    1 error
    Process completed.

  • Entry-SQL syntax error: CASE not allowed

    Hello All. When I use sap netweaver developer to develop webdynpro applications, I always meet that jdbc error.
    when using inner join,left join, or using case when in the sql, it will pop up Entry-SQL syntax error.
    But I have run the sql in Microsoft SQL Server studio successfully.
    The SQL statement "UPDATE SAPNWDDB.Z_SERIAL SET LASTSERIAL = CASE WHEN ENDWITH IS NOT NULL THEN CASE WHEN LASTSERIAL + 1 > ENDWITH THEN ISNULL(STARTWITH, 0) ELSE LASTSERIAL + 1 END ELSE LASTSERIAL + 1 END WHERE SERIALNO = ?" contains the syntax error[s]: - 1:43 - Entry-SQL syntax error: CASE not allowed
    - 1:78 - Entry-SQL syntax error: CASE not allowed
    - 1:124 - SQL syntax error: the token "(" was not expected here
    Can someone help me? Thank you.

    Hi Arun Jaiswal ,
    Thank you for your answer. But I have tried query in sql editor. Actually it can work. Other than "CASE" syntax, it seems not support inner join and left join in webdynpro either. I even can not query the db views.
    That's imposible jdbc not support these simple syntex. I wonder there is any config control the sql compatibility level.
    I have developped a java programm to test it. It is ok. No error. But the same case pop up error in java webdynpro application.I don't know why.
    I am entry level webdynpro developper.
    Hopefully you can help me.
    Thank you.
    Edited by: zegunlee330 on Sep 3, 2010 4:18 AM

  • Tun miniport adapters are not working and the camera card reader is not working on a T61P.

    The Microsoft tun miniport adapters #4,2, and 3 are not working.  They display code 10 error message. Also the USB  mass storage device (camera card reader) is not working. 
    I have tried to uninstall and update the drivers to no avail.  I have used ThinkVantage Tool Box.  It only lets me know that they are not working.  It does say to reinstall them.  I have tried.  All effort has failed.
    All was find until I ran several updates via ThinkVantage.
    All suggestions would be appreciated.
    Thank you,
    Tom

    You will not lose data if you back up
    Worth doing the basic troubleshooting
    Reset
    Restore  best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
    Visit Apple store since if it isn't software probably iPhone is on it's way out

  • I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get into Word?

    I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?

    Hi,
    I checked your account,your Export PDF subscription is in 'Pending' status.
    Once it gets confirmed you will be able to use it.
    Please let us know if you require further assistance.
    Regards,
    Florence

  • Error message:render error while running sales and reports

    r message:render error while running sales and reports.
    how do you fix it?

    Hello,
    Thanks for your post.
    I can't find any useful information based on the error message. Could you please elaborate your scenario with more detail? In addition, please help to collect detail log information regarding this issue.
    If this issue occured while view a SSRS report, please take a look at the following artice:
    How to diagnose issues when running reports in the report server?
    http://blogs.msdn.com/b/lukaszp/archive/2007/01/31/how-to-diagnose-issues-when-running-reports-in-the-report-server.aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • I recently had to wipe my hard drive thanks to a download happy teen. In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said

    In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said teen decided they were going to borrow my external hard drive without telling me and "made room" on it. Is there a way to recover my catalogs? Please tell me there is because I was in the middle of working on a session when I had to wipe my drive and I would REALLY like to not have to go back and reshoot it. Any help would be wonderful!

    It depends on how you wiped your drive.  Depending on how you did it, only the directory was erased and the data can be found with drive recovery software.  Some are free, although there is a small charge for most of them (~$30).  You can usually download a trial version that shows if it will work and you have to pay to be able to save the found files.  Use Google to search for the software.  Different programs work differently and can find different things.
    Good luck.
    John

  • Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

    Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

  • I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

    I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air because there is no more storage space available. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

    Connect your devices to the computer with the USB cable (one device at a time) and import the photos via iPhoto or Image Capture.
    If you have not changed any default settings on your computer, iPhoto will automatically launch when you plug in the device. Then follow the import prompts.

  • I'm receiving a message that items are not syncing and says I should go to iTunes.  However, I can't find in iTunes how to deal with issue.  Any suggestions?

    I'm receiving a message that items will are not syncing and the messages says I should go to iTunes; however, I can't find an area in iTunes that deals with my issue.  Any suggestions on where I should look for the solution?

    Right click on your device icon on the left pane of iTunes and click on transfer pur....

Maybe you are looking for